mirror of
https://github.com/google/blockly.git
synced 2026-01-10 02:17:09 +01:00
52a0d525d7
* feat(build): Make build tasks invoke their prerequisites
- Divide gulp targets into three kinds: main sequence,
manually invokable, and script-only. The first two categories
automatically invoke their prerequisites.
- Give (most of) the affected gulp targets shorter and more memorable
names that could become their npm script names in future.
* feat(build): Make package tasks invoke their prerequisites
Have the package task invoke the cleanBuildDir (as well as
cleanPackageDir) and build tasks. Remove the checkBuildDir
task as it is now redundant since a fresh build is done every
time.
* feat(build): Make git tasks invoke their prerequisites
* feat(build): Make cleanup, license [sic] tasks invoke their prerequisites
Turns out they don't have any, so this commit just classifies
their gulp targets according to the established scheme.
* feat(build): Make appengine tasks invoke their prerequisites
In this case prepareDeployDir will eventually depend on package
but does not for now.
* feat(build): Have npm scripts run npm ci first where applicable
Have any npm script that have external effects (e.g. publishing an
npm package, pushing a new version to appengine, or updating GitHub
Pages) start by running npm ci to ensure that all dependencies are
up-to-date with respect to package-lock.json.
(This is done by npm and not a gulp script because gulp itself
might need updating. So might npm, but that is less likely to
make any difference to what gets published/pushed.)
* chore(build): have tests use package target
Have the tests just run the package target (with debug flags)
since that runs the the build target automatically.
* feat(tests): Write Closure Compiler output directly to dist/
Since they are already UMD-wrapped, have Closure Compiler write
output chunks directly to RELEASE_DIR, i.e. dist/.
* chore(tests): Use freshly-build files in compressed mode.
Use the freshly-built build/*_compresssed.js files when bootstrapping
in compressed mode, rather than using the checked-in files in the
repository root.
This helps ensure that compressed and uncompressed mode will be
testing (as closely as possible) the same code.
Obsoletes #6218 (though the issues discussed there have not actually
yet been addressed in this branch).
* chore(build): Write intermediate langfiles to build/msg
Write the results of create_messages.py to build/msg instead of
build/msg/js.
* fix(build): Use build/msg/en.js instead of msg/messages.js in tests
This has no direct effect but fixes a long-standing misdesign
where we are testing against the input to, rather than the output
of, the language file processing pipeline.
* feat(demos): Use freshly-built files
Use the freshly-built dist/*_compresssed.js and build/msg/* files
rather than using the checked-in files in the repository root.
This helps ensure that these demos are using the most recent
version of Blockly (even in the develop branch).
* fix(build): Update appengine deployment to include built files
Modify the prepareDemos task as follows:
- Use the git index instead of HEAD, so that most local changes
will be applied (without copying whatever .gitignored cruft
might be in the local directory).
- Run clean and build and then copy build/msg and
dist/*_compressed.js* to the deploy directory.
This fixes the problem created by the previous commit, wherein the
demos relied on built files that were not being deployed to
appengine.
* fix(build): Update GitHub Pages deployment to include built files
Modify the updateGithubPages task to run clean and build and
then git add build/msg dist/*_compressed.js*, so that they will
be included in the deployed pages.
This fixes the problem created by the previous^2 commit,
wherein the demos relied on built files that were not being
deployed to GitHub Pages.
* chore(build): Remove build products from repository
Remove *_compressed.js* and msg/js/* from the blockly repository.
Also remove the now-obsolete checkinBuilt gulp task.
* chore(build): Apply relevant changes to test_tasks.js
Apply changes made to run_all_tests.sh and check_metadata.sh to
the corresponding parts of their JS replacements in
test_tasks.js.
* chore(build): Make updates suggested in PR #6475
- Remove `clean:builddir` and `clean:releasedir` - `clean`
is sufficient.
- Remove duplicate `require` from `appengine_tasks.js`.
* feat(build): Use shorter npm script names
Since scripts that run build tasks now automatically run their
prerequisite tasks, the previous naming scheme of task `build`
running all the `build:subtask`s no longe really makes very
much sense.
Additionally, following a chat discussion, there seems to be a
rough consensus to use "messages" to refer to the .json input
files, and "langfiles" to the generated .js output files.
Consequently, simplify npm script names by renaming as follows:
- "generate:langfiles" -> "messages"
- "build:langfiles" -> "langfiles"
- "build:js" -> "tsc"
- "build:deps" -> "deps"
- "build:compiled" -> "minify"
- "build:compressed": delete this synonym for "build:compiled",
("minify" was chosen as agnostic to Closure Compiler vs. WebPack.)
* chores(build): Add deprecation notice for old scripts
To reduce potential confusion/frustration, restore the previous
npm scripts but have them display a deprecation notice instead
(note that npm prints the script contents before running it, so
echo is not needed).
* docs(build): Add comments distinguishing 'messages' from 'langfiles'
45 lines
1.7 KiB
Bash
Executable File
45 lines
1.7 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
# Determines the size of generated files and updates check_metadata.sh to
|
|
# reflect the new values.
|
|
|
|
# Location of the pre-built compressed files.
|
|
#
|
|
# (TODO(#5007): Should fetch this from scripts/gulpfiles/config.js
|
|
# instead of hardcoding it here.
|
|
readonly RELEASE_DIR='dist'
|
|
|
|
gzip -k "${RELEASE_DIR}/blockly_compressed.js"
|
|
gzip -k "${RELEASE_DIR}/blocks_compressed.js"
|
|
|
|
blockly_size=$(wc -c < "${RELEASE_DIR}/blockly_compressed.js")
|
|
blocks_size=$(wc -c < "${RELEASE_DIR}/blocks_compressed.js")
|
|
blockly_gz_size=$(wc -c < "${RELEASE_DIR}/blockly_compressed.js.gz")
|
|
blocks_gz_size=$(wc -c < "${RELEASE_DIR}/blocks_compressed.js.gz")
|
|
quarters=(1 1 1 2 2 2 3 3 3 4 4 4)
|
|
month=$(date +%-m)
|
|
quarter=$(echo Q${quarters[$month - 1]} $(date +%Y))
|
|
version=$(npx -c 'echo "$npm_package_version"')
|
|
|
|
replacement="# ${quarter}\t${version}\t${blockly_size}\n"
|
|
replacement+="readonly BLOCKLY_SIZE_EXPECTED=${blockly_size}"
|
|
sed -ri.bak "s/readonly BLOCKLY_SIZE_EXPECTED=[0-9]+/${replacement}/g" \
|
|
tests/scripts/check_metadata.sh
|
|
|
|
replacement="# ${quarter}\t${version}\t${blocks_size}\n"
|
|
replacement+="readonly BLOCKS_SIZE_EXPECTED=${blocks_size}"
|
|
sed -ri.bak "s/readonly BLOCKS_SIZE_EXPECTED=[0-9]+/${replacement}/g" \
|
|
tests/scripts/check_metadata.sh
|
|
|
|
replacement="# ${quarter}\t${version}\t${blockly_gz_size}\n"
|
|
replacement+="readonly BLOCKLY_GZ_SIZE_EXPECTED=${blockly_gz_size}"
|
|
sed -ri.bak "s/readonly BLOCKLY_GZ_SIZE_EXPECTED=[0-9]+/${replacement}/g" \
|
|
tests/scripts/check_metadata.sh
|
|
|
|
replacement="# ${quarter}\t${version}\t${blocks_gz_size}\n"
|
|
replacement+="readonly BLOCKS_GZ_SIZE_EXPECTED=${blocks_gz_size}"
|
|
sed -ri.bak "s/readonly BLOCKS_GZ_SIZE_EXPECTED=[0-9]+/${replacement}/g" \
|
|
tests/scripts/check_metadata.sh
|
|
|
|
rm tests/scripts/check_metadata.sh.bak
|