ports: Make new ports/ sub-directory and move all ports there.

This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.

ports/cc3200/boards/LAUNCHXL/mpconfigboard.h

@@ -0,0 +1,49 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2013, 2014 Damien P. George
+ * Copyright (c) 2015 Daniel Campora
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#define LAUNCHXL
+
+#define MICROPY_HW_BOARD_NAME                       "LaunchPad"
+#define MICROPY_HW_MCU_NAME                         "CC3200"
+
+#define MICROPY_HW_ANTENNA_DIVERSITY                (0)
+
+#define MICROPY_STDIO_UART                          1
+#define MICROPY_STDIO_UART_BAUD                     115200
+
+#define MICROPY_SYS_LED_PRCM                        PRCM_GPIOA1
+#define MICROPY_SAFE_BOOT_PRCM                      PRCM_GPIOA2
+#define MICROPY_SYS_LED_PORT                        GPIOA1_BASE
+#define MICROPY_SAFE_BOOT_PORT                      GPIOA2_BASE
+#define MICROPY_SYS_LED_GPIO                        pin_GP9
+#define MICROPY_SYS_LED_PIN_NUM                     PIN_64      // GP9
+#define MICROPY_SAFE_BOOT_PIN_NUM                   PIN_15      // GP22
+#define MICROPY_SYS_LED_PORT_PIN                    GPIO_PIN_1
+#define MICROPY_SAFE_BOOT_PORT_PIN                  GPIO_PIN_6
+
+#define MICROPY_PORT_SFLASH_BLOCK_COUNT             32
+

ports/cc3200/boards/LAUNCHXL/pins.csv

@@ -0,0 +1,25 @@
+P12,58
+P13,4
+P14,3
+P15,61
+P16,59
+P17,5
+P18,62
+P19,1
+P110,2
+P33,57
+P34,60
+P37,63
+P38,53
+P39,64
+P310,50
+P49,16
+P410,17
+P22,18
+P23,8
+P24,45
+P26,7
+P27,6
+P28,21
+P29,55
+P210,15

ports/cc3200/boards/WIPY/mpconfigboard.h

@@ -0,0 +1,48 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2013, 2014 Damien P. George
+ * Copyright (c) 2015 Daniel Campora
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#define WIPY
+
+#define MICROPY_HW_BOARD_NAME                       "WiPy"
+#define MICROPY_HW_MCU_NAME                         "CC3200"
+
+#define MICROPY_HW_ANTENNA_DIVERSITY                (1)
+
+#define MICROPY_STDIO_UART                          1
+#define MICROPY_STDIO_UART_BAUD                     115200
+
+#define MICROPY_SYS_LED_PRCM                        PRCM_GPIOA3
+#define MICROPY_SAFE_BOOT_PRCM                      PRCM_GPIOA3
+#define MICROPY_SYS_LED_PORT                        GPIOA3_BASE
+#define MICROPY_SAFE_BOOT_PORT                      GPIOA3_BASE
+#define MICROPY_SYS_LED_GPIO                        pin_GP25
+#define MICROPY_SYS_LED_PIN_NUM                     PIN_21      // GP25   (SOP2)
+#define MICROPY_SAFE_BOOT_PIN_NUM                   PIN_18      // GP28
+#define MICROPY_SYS_LED_PORT_PIN                    GPIO_PIN_1
+#define MICROPY_SAFE_BOOT_PORT_PIN                  GPIO_PIN_4
+
+#define MICROPY_PORT_SFLASH_BLOCK_COUNT             96

ports/cc3200/boards/WIPY/pins.csv

@@ -0,0 +1,25 @@
+L2,GP2
+L3,GP1
+L4,GP23
+L5,GP24
+L6,GP11
+L7,GP12
+L8,GP13
+L9,GP14
+L10,GP15
+L11,GP16
+L12,GP17
+L13,GP22
+L14,GP28
+R4,GP10
+R5,GP9
+R6,GP8
+R7,GP7
+R8,GP6
+R9,GP30
+R10,GP31
+R11,GP3
+R12,GP0
+R13,GP4
+R14,GP5
+HBL,GP25

ports/cc3200/boards/cc3200_af.csv

@@ -0,0 +1,66 @@
+Pin,Name,Default,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,AF8,AF9,AF10,AF11,AF12,AF13,AF14,AF15,ADC
+1,GP10,GP10,GP10,I2C0_SCL,,TIM3_PWM,,,SD0_CLK,UART1_TX,,,,,TIM0_CC,,,,
+2,GP11,GP11,GP11,I2C0_SDA,,TIM3_PWM,pXCLK(XVCLK),,SD0_CMD,UART1_RX,,,,,TIM1_CC,I2S0_FS,,,
+3,GP12,GP12,GP12,,,I2S0_CLK,pVS(VSYNC),I2C0_SCL,,UART0_TX,,,,,TIM1_CC,,,,
+4,GP13,GP13,GP13,,,,pHS(HSYNC),I2C0_SDA,,UART0_RX,,,,,TIM2_CC,,,,
+5,GP14,GP14,GP14,,,,pDATA8(CAM_D4),I2C0_SCL,,SPI0_CLK,,,,,TIM2_CC,,,,
+6,GP15,GP15,GP15,,,,pDATA9(CAM_D5),I2C0_SDA,,SPI0_MISO,SD0_DAT0,,,,,TIM3_CC,,,
+7,GP16,GP16,GP16,,,,pDATA10(CAM_D6),UART1_TX,,SPI0_MOSI,SD0_CLK,,,,,TIM3_CC,,,
+8,GP17,GP17,GP17,,,,pDATA11(CAM_D7),UART1_RX,,SPI0_CS0,SD0_CMD,,,,,,,,
+9,VDD_DIG1,VDD_DIG1,VDD_DIG1,,,,,,,,,,,,,,,,
+10,VIN_IO1,VIN_IO1,VIN_IO1,,,,,,,,,,,,,,,,
+11,FLASH_SPI_CLK,FLASH_SPI_CLK,FLASH_SPI_CLK,,,,,,,,,,,,,,,,
+12,FLASH_SPI_DOUT,FLASH_SPI_DOUT,FLASH_SPI_DOUT,,,,,,,,,,,,,,,,
+13,FLASH_SPI_DIN,FLASH_SPI_DIN,FLASH_SPI_DIN,,,,,,,,,,,,,,,,
+14,FLASH_SPI_CS,FLASH_SPI_CS,FLASH_SPI_CS,,,,,,,,,,,,,,,,
+15,GP22,GP22,GP22,,,,,TIM2_CC,,I2S0_FS,,,,,,,,,
+16,GP23,TDI,GP23,TDI,UART1_TX,,,,,,,I2C0_SCL,,,,,,,
+17,GP24,TDO,GP24,TDO,UART1_RX,,TIM3_CC,TIM0_PWM,I2S0_FS,,,I2C0_SDA,,,,,,,
+18,GP28,GP28,GP28,,,,,,,,,,,,,,,,
+19,TCK,TCK,,TCK,,,,,,,TIM1_PWM,,,,,,,,
+20,GP29,TMS,GP29,TMS,,,,,,,,,,,,,,,
+21,GP25,SOP2,GP25,,I2S0_FS,,,,,,,TIM1_PWM,,,,,,,
+22,WLAN_XTAL_N,WLAN_XTAL_N,WLAN_XTAL_N,,,,,,,,,,,,,,,,
+23,WLAN_XTAL_P,WLAN_XTAL_P,WLAN_XTAL_P,,,,,,,,,,,,,,,,
+24,VDD_PLL,VDD_PLL,VDD_PLL,,,,,,,,,,,,,,,,
+25,LDO_IN2,LDO_IN2,LDO_IN2,,,,,,,,,,,,,,,,
+26,NC,NC,NC,,,,,,,,,,,,,,,,
+27,NC,NC,NC,,,,,,,,,,,,,,,,
+28,NC,NC,NC,,,,,,,,,,,,,,,,
+29,ANTSEL1,ANTSEL1,ANTSEL1,,,,,,,,,,,,,,,,
+30,ANTSEL2,ANTSEL2,ANTSEL2,,,,,,,,,,,,,,,,
+31,RF_BG,RF_BG,RF_BG,,,,,,,,,,,,,,,,
+32,nRESET,nRESET,nRESET,,,,,,,,,,,,,,,,
+33,VDD_PA_IN,VDD_PA_IN,VDD_PA_IN,,,,,,,,,,,,,,,,
+34,SOP1,SOP1,SOP1,,,,,,,,,,,,,,,,
+35,SOP0,SOP0,SOP0,,,,,,,,,,,,,,,,
+36,LDO_IN1,LDO_IN1,LDO_IN1,,,,,,,,,,,,,,,,
+37,VIN_DCDC_ANA,VIN_DCDC_ANA,VIN_DCDC_ANA,,,,,,,,,,,,,,,,
+38,DCDC_ANA_SW,DCDC_ANA_SW,DCDC_ANA_SW,,,,,,,,,,,,,,,,
+39,VIN_DCDC_PA,VIN_DCDC_ PA,VIN_DCDC_PA,,,,,,,,,,,,,,,,
+40,DCDC_PA_SW_P,DCDC_PA_SW_P,DCDC_PA_SW_P,,,,,,,,,,,,,,,,
+41,DCDC_PA_SW_N,DCDC_PA_SW_N,DCDC_PA_SW_N,,,,,,,,,,,,,,,,
+42,DCDC_PA_OUT,DCDC_PA_O UT,DCDC_PA_O UT,,,,,,,,,,,,,,,,
+43,DCDC_DIG_SW,DCDC_DIG_ SW,DCDC_DIG_ SW,,,,,,,,,,,,,,,,
+44,VIN_DCDC_DIG,VIN_DCDC_ DIG,VIN_DCDC_ DIG,,,,,,,,,,,,,,,,
+45,GP31,DCDC_ANA2_SW_P,GP31,,UART1_RX,,,,I2S0_DAT0,SPI0_CLK,,UART0_RX,,,I2S0_FS,,,,
+46,DCDC_ANA2_SW_N,DCDC_ANA2_SW_N,DCDC_ANA2_SW_N,,,,,,,,,,,,,,,,
+47,VDD_ANA2,VDD_ANA2,VDD_ANA2,,,,,,,,,,,,,,,,
+48,VDD_ANA1,VDD_ANA1,VDD_ANA1,,,,,,,,,,,,,,,,
+49,VDD_RAM,VDD_RAM,VDD_RAM,,,,,,,,,,,,,,,,
+50,GP0,GP0,GP0,,,UART0_RTS,I2S0_DAT0,,I2S0_DAT1,TIM0_CC,,SPI0_CS0,UART1_RTS,,UART0_CTS,,,,
+51,RTC_XTAL_P,RTC_XTAL_P,RTC_XTAL_P,,,,,,,,,,,,,,,,
+52,RTC_XTAL_N,RTC_XTAL_N,GP32,,I2S0_CLK,,I2S0_DAT0,,UART0_RTS,,SPI0_MOSI,,,,,,,,
+53,GP30,GP30,GP30,,I2S0_CLK,I2S0_FS,TIM2_CC,,,SPI0_MISO,,UART0_TX,,,,,,,
+54,VIN_IO2,VIN_IO2,VIN_IO2,,,,,,,,,,,,,,,,
+55,GP1,GP1,GP1,,,UART0_TX,pCLK (PIXCLK),,UART1_TX,TIM0_CC,,,,,,,,,
+56,VDD_DIG2,VDD_DIG2,VDD_DIG2,,,,,,,,,,,,,,,,
+57,GP2,GP2,GP2,,,UART0_RX,,,UART1_RX,TIM1_CC,,,,,,,,,ADC0_CH0
+58,GP3,GP3,GP3,,,,pDATA7(CAM_D3),,UART1_TX,,,,,,,,,,ADC0_CH1
+59,GP4,GP4,GP4,,,,pDATA6(CAM_D2),,UART1_RX,,,,,,,,,,ADC0_CH2
+60,GP5,GP5,GP5,,,,pDATA5(CAM_D1),,I2S0_DAT1,TIM2_CC,,,,,,,,,ADC0_CH3
+61,GP6,GP6,GP6,,,UART1_CTS,pDATA4(CAM_D0),UART0_RTS,UART0_CTS,TIM3_CC,,,,,,,,,
+62,GP7,GP7,GP7,,,UART1_RTS,,,,,,,UART0_RTS,UART0_TX,,I2S0_CLK,,,
+63,GP8,GP8,GP8,,,,,,SD0_IRQ,I2S0_FS,,,,,TIM3_CC,,,,
+64,GP9,GP9,GP9,,,TIM2_PWM,,,SD0_DAT0,I2S0_DAT0,,,,,TIM0_CC,,,,
+65,GND_TAB,GND_TAB,GND_TAB,,,,,,,,,,,,,,,,

ports/cc3200/boards/cc3200_prefix.c

@@ -0,0 +1,69 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2013, 2014 Damien P. George
+ * Copyright (c) 2015 Daniel Campora
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// cc3200_prefix.c becomes the initial portion of the generated pins file.
+
+#include <stdio.h>
+#include <stdint.h>
+
+#include "py/mpconfig.h"
+#include "py/obj.h"
+#include "inc/hw_types.h"
+#include "inc/hw_memmap.h"
+#include "pin.h"
+#include "gpio.h"
+#include "pybpin.h"
+
+
+#define AF(af_name, af_idx, af_fn, af_unit, af_type) \
+{ \
+    .name = MP_QSTR_ ## af_name, \
+    .idx = (af_idx), \
+    .fn = PIN_FN_ ## af_fn, \
+    .unit = (af_unit), \
+    .type = PIN_TYPE_ ## af_fn ## _ ## af_type, \
+}
+
+
+#define PIN(p_pin_name, p_port, p_bit, p_pin_num, p_af_list, p_num_afs) \
+{ \
+    { &pin_type }, \
+    .name           = MP_QSTR_ ## p_pin_name, \
+    .port           = PORT_A ## p_port, \
+    .af_list        = (p_af_list), \
+    .pull           = PIN_TYPE_STD, \
+    .bit            = (p_bit), \
+    .pin_num        = (p_pin_num), \
+    .af             = PIN_MODE_0, \
+    .strength       = PIN_STRENGTH_4MA, \
+    .mode           = GPIO_DIR_MODE_IN, \
+    .num_afs        = (p_num_afs), \
+    .value          = 0, \
+    .used           = false, \
+    .irq_trigger    = 0, \
+    .irq_flags      = 0, \
+}

ports/cc3200/boards/make-pins.py

@@ -0,0 +1,233 @@
+#!/usr/bin/env python
+"""Generates the pins file for the CC3200."""
+
+from __future__ import print_function
+
+import argparse
+import sys
+import csv
+
+
+SUPPORTED_AFS = { 'UART': ('TX', 'RX', 'RTS', 'CTS'),
+                  'SPI': ('CLK', 'MOSI', 'MISO', 'CS0'),
+                  #'I2S': ('CLK', 'FS', 'DAT0', 'DAT1'),
+                  'I2C': ('SDA', 'SCL'),
+                  'TIM': ('PWM'),
+                  'SD': ('CLK', 'CMD', 'DAT0'),
+                  'ADC': ('CH0', 'CH1', 'CH2', 'CH3')
+                }
+
+def parse_port_pin(name_str):
+    """Parses a string and returns a (port, gpio_bit) tuple."""
+    if len(name_str) < 3:
+        raise ValueError("Expecting pin name to be at least 3 characters")
+    if name_str[:2] != 'GP':
+        raise ValueError("Expecting pin name to start with GP")
+    if not name_str[2:].isdigit():
+        raise ValueError("Expecting numeric GPIO number")
+    port = int(int(name_str[2:]) / 8)
+    gpio_bit = 1 << int(int(name_str[2:]) % 8)
+    return (port, gpio_bit)
+
+
+class AF:
+    """Holds the description of an alternate function"""
+    def __init__(self, name, idx, fn, unit, type):
+        self.name = name
+        self.idx = idx
+        if self.idx > 15:
+            self.idx = -1
+        self.fn = fn
+        self.unit = unit
+        self.type = type
+
+    def print(self):
+        print ('    AF({:16s}, {:4d}, {:8s}, {:4d}, {:8s}),    // {}'.format(self.name, self.idx, self.fn, self.unit, self.type, self.name))
+
+
+class Pin:
+    """Holds the information associated with a pin."""
+    def __init__(self, name, port, gpio_bit, pin_num):
+        self.name = name
+        self.port = port
+        self.gpio_bit = gpio_bit
+        self.pin_num = pin_num
+        self.board_pin = False
+        self.afs = []
+
+    def add_af(self, af):
+        self.afs.append(af)
+
+    def print(self):
+        print('// {}'.format(self.name))
+        if len(self.afs):
+            print('const pin_af_t pin_{}_af[] = {{'.format(self.name))
+            for af in self.afs:
+                af.print()
+            print('};')
+            print('pin_obj_t pin_{:4s} = PIN({:6s}, {:1d}, {:3d}, {:2d}, pin_{}_af, {});\n'.format(
+                   self.name, self.name, self.port, self.gpio_bit, self.pin_num, self.name, len(self.afs)))
+        else:
+            print('pin_obj_t pin_{:4s} = PIN({:6s}, {:1d}, {:3d}, {:2d}, NULL, 0);\n'.format(
+                   self.name, self.name, self.port, self.gpio_bit, self.pin_num))
+
+    def print_header(self, hdr_file):
+        hdr_file.write('extern pin_obj_t pin_{:s};\n'.format(self.name))
+
+
+class Pins:
+    def __init__(self):
+        self.board_pins = []   # list of pin objects
+
+    def find_pin(self, port, gpio_bit):
+        for pin in self.board_pins:
+            if pin.port == port and pin.gpio_bit == gpio_bit:
+                return pin
+
+    def find_pin_by_num(self, pin_num):
+        for pin in self.board_pins:
+            if pin.pin_num == pin_num:
+                return pin
+
+    def find_pin_by_name(self, name):
+        for pin in self.board_pins:
+            if pin.name == name:
+                return pin
+
+    def parse_af_file(self, filename, pin_col, pinname_col, af_start_col):
+        with open(filename, 'r') as csvfile:
+            rows = csv.reader(csvfile)
+            for row in rows:
+                try:
+                    (port_num, gpio_bit) = parse_port_pin(row[pinname_col])
+                except:
+                    continue
+                if not row[pin_col].isdigit():
+                    raise ValueError("Invalid pin number {:s} in row {:s}".format(row[pin_col]), row)
+                # Pin numbers must start from 0 when used with the TI API
+                pin_num = int(row[pin_col]) - 1;        
+                pin = Pin(row[pinname_col], port_num, gpio_bit, pin_num)
+                self.board_pins.append(pin)
+                af_idx = 0
+                for af in row[af_start_col:]:
+                    af_splitted = af.split('_')
+                    fn_name = af_splitted[0].rstrip('0123456789')
+                    if  fn_name in SUPPORTED_AFS:
+                        type_name = af_splitted[1]
+                        if type_name in SUPPORTED_AFS[fn_name]:
+                            unit_idx = af_splitted[0][-1]
+                            pin.add_af(AF(af, af_idx, fn_name, int(unit_idx), type_name))
+                    af_idx += 1
+
+    def parse_board_file(self, filename, cpu_pin_col):
+        with open(filename, 'r') as csvfile:
+            rows = csv.reader(csvfile)
+            for row in rows:
+                # Pin numbers must start from 0 when used with the TI API
+                if row[cpu_pin_col].isdigit():
+                    pin = self.find_pin_by_num(int(row[cpu_pin_col]) - 1)
+                else:
+                    pin = self.find_pin_by_name(row[cpu_pin_col])
+                if pin:
+                    pin.board_pin = True
+
+    def print_named(self, label, pins):
+        print('')
+        print('STATIC const mp_rom_map_elem_t pin_{:s}_pins_locals_dict_table[] = {{'.format(label))
+        for pin in pins:
+            if pin.board_pin:
+                print('    {{ MP_ROM_QSTR(MP_QSTR_{:6s}), MP_ROM_PTR(&pin_{:6s}) }},'.format(pin.name, pin.name))
+        print('};')
+        print('MP_DEFINE_CONST_DICT(pin_{:s}_pins_locals_dict, pin_{:s}_pins_locals_dict_table);'.format(label, label));
+
+    def print(self):
+        for pin in self.board_pins:
+            if pin.board_pin:
+                pin.print()
+        self.print_named('board', self.board_pins)
+        print('')
+
+    def print_header(self, hdr_filename):
+        with open(hdr_filename, 'wt') as hdr_file:
+            for pin in self.board_pins:
+                if pin.board_pin:
+                    pin.print_header(hdr_file)
+
+    def print_qstr(self, qstr_filename):
+        with open(qstr_filename, 'wt') as qstr_file:
+            pin_qstr_set = set([])
+            af_qstr_set = set([])
+            for pin in self.board_pins:
+                if pin.board_pin:
+                    pin_qstr_set |= set([pin.name])
+                    for af in pin.afs:
+                        af_qstr_set |= set([af.name])
+            print('// Board pins', file=qstr_file)
+            for qstr in sorted(pin_qstr_set):
+                print('Q({})'.format(qstr), file=qstr_file)
+            print('\n// Pin AFs', file=qstr_file)
+            for qstr in sorted(af_qstr_set):
+                print('Q({})'.format(qstr), file=qstr_file)
+
+
+def main():
+    parser = argparse.ArgumentParser(
+        prog="make-pins.py",
+        usage="%(prog)s [options] [command]",
+        description="Generate board specific pin file"
+    )
+    parser.add_argument(
+        "-a", "--af",
+        dest="af_filename",
+        help="Specifies the alternate function file for the chip",
+        default="cc3200_af.csv"
+    )
+    parser.add_argument(
+        "-b", "--board",
+        dest="board_filename",
+        help="Specifies the board file",
+    )
+    parser.add_argument(
+        "-p", "--prefix",
+        dest="prefix_filename",
+        help="Specifies beginning portion of generated pins file",
+        default="cc3200_prefix.c"
+    )
+    parser.add_argument(
+        "-q", "--qstr",
+        dest="qstr_filename",
+        help="Specifies name of generated qstr header file",
+        default="build/pins_qstr.h"
+    )
+    parser.add_argument(
+        "-r", "--hdr",
+        dest="hdr_filename",
+        help="Specifies name of generated pin header file",
+        default="build/pins.h"
+    )
+    args = parser.parse_args(sys.argv[1:])
+
+    pins = Pins()
+
+    print('// This file was automatically generated by make-pins.py')
+    print('//')
+    if args.af_filename:
+        print('// --af {:s}'.format(args.af_filename))
+        pins.parse_af_file(args.af_filename, 0, 1, 3)
+
+    if args.board_filename:
+        print('// --board {:s}'.format(args.board_filename))
+        pins.parse_board_file(args.board_filename, 1)
+
+    if args.prefix_filename:
+        print('// --prefix {:s}'.format(args.prefix_filename))
+        print('')
+        with open(args.prefix_filename, 'r') as prefix_file:
+            print(prefix_file.read())
+    pins.print()
+    pins.print_qstr(args.qstr_filename)
+    pins.print_header(args.hdr_filename)
+
+
+if __name__ == "__main__":
+    main()