esp32: Remove dependency on esp_tinyusb.

Instead, depend directly on espressif/tinyusb component (which is otherwise transitively included via esp_tinyusb). Turns out esp_tinyusb builds a bunch of source files with symbols that conflict with our tinyusb symbols (i.e. descriptors_control.c). This only works because nothing in MicroPython causes the linker to include the esp_tinyusb.a library, however in order to override the dcd_int_handler (in following commit) this caused the linker to pull this library in and break the build. There's also a problematic header skew - TinyUSB component was building with the tusb_config.h file from esp_tinyusb component, but we have our own tusb_config.h file in shared/tinyusb. The changes in parent commit allow us to build the TinyUSB component with our tusb_config.h header. User-facing impacts are: - Can no longer override USB VID & PID via sdkconfig, have to set MICROPY_HW_USB_VID/PID instead (changes applied in this commit). - esp32 boards will have the same USB serial number as other ports (i.e. based on the hardware MAC address, not hard-coded). Side effects include: - CFG_TUD_DWC2_SLAVE_ENABLE is now set, DMA mode is disabled. Signed-off-by: Angus Gratton <angus@redyak.com.au>
2026-01-04 19:20:22 +01:00 · 2025-11-12 15:48:59 +11:00
parent a435e4ecfd
commit 4f193132d2
46 changed files with 70 additions and 159 deletions
--- a/ports/esp32/boards/ARDUINO_NANO_ESP32/mpconfigboard.cmake
+++ b/ports/esp32/boards/ARDUINO_NANO_ESP32/mpconfigboard.cmake
@@ -6,7 +6,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.240mhz
    boards/sdkconfig.spiram_sx
--- a/ports/esp32/boards/ARDUINO_NANO_ESP32/mpconfigboard.h
+++ b/ports/esp32/boards/ARDUINO_NANO_ESP32/mpconfigboard.h
@@ -22,6 +22,11 @@
 #define MICROPY_HW_USB_CDC_1200BPS_TOUCH    (1)
 #define MICROPY_SCHEDULER_STATIC_NODES      (1)

+#define MICROPY_HW_USB_VID 0x2341
+#define MICROPY_HW_USB_PID 0x056B
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Arduino"
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "Nano ESP32"
+
 #define MICROPY_BOARD_STARTUP                           NANO_ESP32_board_startup
 void NANO_ESP32_board_startup(void);

--- a/ports/esp32/boards/ARDUINO_NANO_ESP32/sdkconfig.board
+++ b/ports/esp32/boards/ARDUINO_NANO_ESP32/sdkconfig.board
@@ -11,13 +11,6 @@ CONFIG_SPIRAM_IGNORE_NOTFOUND=

 CONFIG_LWIP_LOCAL_HOSTNAME="nano-esp32"

-CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=n
-CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=n
-CONFIG_TINYUSB_DESC_CUSTOM_VID=0x2341
-CONFIG_TINYUSB_DESC_CUSTOM_PID=0x056B
-CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Arduino"
-CONFIG_TINYUSB_DESC_PRODUCT_STRING="Nano ESP32"
-
 # compatibility with Espressif Arduino core
 CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=y
 CONFIG_ESP_ENABLE_COREDUMP_TO_FLASH=y
--- a/ports/esp32/boards/ESP32_GENERIC_S2/mpconfigboard.cmake
+++ b/ports/esp32/boards/ESP32_GENERIC_S2/mpconfigboard.cmake
@@ -2,6 +2,5 @@ set(IDF_TARGET esp32s2)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.spiram_sx
 )
--- a/ports/esp32/boards/ESP32_GENERIC_S3/mpconfigboard.cmake
+++ b/ports/esp32/boards/ESP32_GENERIC_S3/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.spiram_sx
    boards/ESP32_GENERIC_S3/sdkconfig.board
--- a/ports/esp32/boards/LOLIN_S2_MINI/mpconfigboard.cmake
+++ b/ports/esp32/boards/LOLIN_S2_MINI/mpconfigboard.cmake
@@ -3,7 +3,6 @@ set(IDF_TARGET esp32s2)
 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
    boards/sdkconfig.spiram_sx
-    boards/sdkconfig.usb
 )

 set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest.py)
--- a/ports/esp32/boards/LOLIN_S2_PICO/mpconfigboard.cmake
+++ b/ports/esp32/boards/LOLIN_S2_PICO/mpconfigboard.cmake
@@ -3,7 +3,6 @@ set(IDF_TARGET esp32s2)
 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
    boards/sdkconfig.spiram_sx
-    boards/sdkconfig.usb
 )

 set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest.py)
--- a/ports/esp32/boards/M5STACK_ATOMS3_LITE/mpconfigboard.cmake
+++ b/ports/esp32/boards/M5STACK_ATOMS3_LITE/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/ESP32_GENERIC_S3/sdkconfig.board
 )
--- a/ports/esp32/boards/UM_FEATHERS2/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_FEATHERS2/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s2)
 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
    boards/sdkconfig.spiram_sx
-    boards/sdkconfig.usb
    boards/UM_FEATHERS2/sdkconfig.board
 )

--- a/ports/esp32/boards/UM_FEATHERS2NEO/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_FEATHERS2NEO/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s2)
 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
    boards/sdkconfig.spiram_sx
-    boards/sdkconfig.usb
    boards/UM_FEATHERS2NEO/sdkconfig.board
 )

--- a/ports/esp32/boards/UM_FEATHERS3/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_FEATHERS3/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.240mhz
    boards/sdkconfig.spiram_sx
--- a/ports/esp32/boards/UM_FEATHERS3/mpconfigboard.h
+++ b/ports/esp32/boards/UM_FEATHERS3/mpconfigboard.h
@@ -11,3 +11,8 @@
 #define MICROPY_HW_SPI1_MOSI                (35)
 #define MICROPY_HW_SPI1_MISO                (37)
 #define MICROPY_HW_SPI1_SCK                 (36)
+
+#define MICROPY_HW_USB_VID 0x303A
+#define MICROPY_HW_USB_PID 0x80D7
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Unexpected Maker"
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "FeatherS3"
--- a/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board
+++ b/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board
@@ -4,12 +4,3 @@ CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 CONFIG_SPIRAM_MEMTEST=

 CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS3"
-
-CONFIG_TINYUSB_DESC_CUSTOM_VID=0x303A
-CONFIG_TINYUSB_DESC_CUSTOM_PID=0x80D7
-CONFIG_TINYUSB_DESC_BCD_DEVICE=0x0100
-CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=n
-CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=n
-CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Unexpected Maker"
-CONFIG_TINYUSB_DESC_PRODUCT_STRING="FeatherS3"
-CONFIG_TINYUSB_DESC_SERIAL_STRING="_fs3_"
--- a/ports/esp32/boards/UM_FEATHERS3NEO/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_FEATHERS3NEO/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.240mhz
    boards/sdkconfig.spiram_sx
--- a/ports/esp32/boards/UM_FEATHERS3NEO/mpconfigboard.h
+++ b/ports/esp32/boards/UM_FEATHERS3NEO/mpconfigboard.h
@@ -8,3 +8,8 @@
 #define MICROPY_HW_SPI1_MOSI                (35)
 #define MICROPY_HW_SPI1_MISO                (37)
 #define MICROPY_HW_SPI1_SCK                 (36)
+
+#define MICROPY_HW_USB_VID 0x303A
+#define MICROPY_HW_USB_PID 0x81FC
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Unexpected Maker"
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "FeatherS3 Neo"
--- a/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board
+++ b/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board
@@ -5,12 +5,3 @@ CONFIG_ESPTOOLPY_AFTER_NORESET=y
 CONFIG_SPIRAM_MEMTEST=

 CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS3Neo"
-
-CONFIG_TINYUSB_DESC_CUSTOM_VID=0x303A
-CONFIG_TINYUSB_DESC_CUSTOM_PID=0x81FC
-CONFIG_TINYUSB_DESC_BCD_DEVICE=0x0100
-CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=n
-CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=n
-CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Unexpected Maker"
-CONFIG_TINYUSB_DESC_PRODUCT_STRING="FeatherS3 Neo"
-CONFIG_TINYUSB_DESC_SERIAL_STRING="_fs3neo_"
--- a/ports/esp32/boards/UM_NANOS3/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_NANOS3/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.240mhz
    boards/sdkconfig.spiram_sx
--- a/ports/esp32/boards/UM_NANOS3/mpconfigboard.h
+++ b/ports/esp32/boards/UM_NANOS3/mpconfigboard.h
@@ -8,3 +8,8 @@
 #define MICROPY_HW_SPI1_MOSI                (35)
 #define MICROPY_HW_SPI1_MISO                (37)
 #define MICROPY_HW_SPI1_SCK                 (36)
+
+#define MICROPY_HW_USB_VID 0x303A
+#define MICROPY_HW_USB_PID 0x817A
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Unexpected Maker"
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "NanoS3"
--- a/ports/esp32/boards/UM_NANOS3/sdkconfig.board
+++ b/ports/esp32/boards/UM_NANOS3/sdkconfig.board
@@ -4,12 +4,3 @@ CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 CONFIG_SPIRAM_MEMTEST=

 CONFIG_LWIP_LOCAL_HOSTNAME="UMNanoS3"
-
-CONFIG_TINYUSB_DESC_CUSTOM_VID=0x303A
-CONFIG_TINYUSB_DESC_CUSTOM_PID=0x817A
-CONFIG_TINYUSB_DESC_BCD_DEVICE=0x0100
-CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=n
-CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=n
-CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Unexpected Maker"
-CONFIG_TINYUSB_DESC_PRODUCT_STRING="NanoS3"
-CONFIG_TINYUSB_DESC_SERIAL_STRING="_ns3_"
--- a/ports/esp32/boards/UM_OMGS3/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_OMGS3/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.240mhz
    boards/sdkconfig.spiram_sx
--- a/ports/esp32/boards/UM_OMGS3/mpconfigboard.h
+++ b/ports/esp32/boards/UM_OMGS3/mpconfigboard.h
@@ -8,3 +8,8 @@
 #define MICROPY_HW_SPI1_MOSI (6)
 #define MICROPY_HW_SPI1_MISO (5)
 #define MICROPY_HW_SPI1_SCK (4)
+
+#define MICROPY_HW_USB_VID 0x303A
+#define MICROPY_HW_USB_PID 0x8225
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Unexpected Maker"
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "OMGS3"
--- a/ports/esp32/boards/UM_OMGS3/sdkconfig.board
+++ b/ports/esp32/boards/UM_OMGS3/sdkconfig.board
@@ -5,12 +5,3 @@ CONFIG_ESPTOOLPY_AFTER_NORESET=y
 CONFIG_SPIRAM_MEMTEST=

 CONFIG_LWIP_LOCAL_HOSTNAME="UMOMGS3"
-
-CONFIG_TINYUSB_DESC_CUSTOM_VID=0x303A
-CONFIG_TINYUSB_DESC_CUSTOM_PID=0x8225
-CONFIG_TINYUSB_DESC_BCD_DEVICE=0x0100
-CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=n
-CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=n
-CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Unexpected Maker"
-CONFIG_TINYUSB_DESC_PRODUCT_STRING="OMGS3"
-CONFIG_TINYUSB_DESC_SERIAL_STRING="_omgs3_"
--- a/ports/esp32/boards/UM_PROS3/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_PROS3/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.240mhz
    boards/sdkconfig.spiram_sx
--- a/ports/esp32/boards/UM_PROS3/mpconfigboard.h
+++ b/ports/esp32/boards/UM_PROS3/mpconfigboard.h
@@ -8,3 +8,8 @@
 #define MICROPY_HW_SPI1_MOSI                (35)
 #define MICROPY_HW_SPI1_MISO                (37)
 #define MICROPY_HW_SPI1_SCK                 (36)
+
+#define MICROPY_HW_USB_VID 0x303A
+#define MICROPY_HW_USB_PID 0x80D4
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Unexpected Maker"
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "ProS3"
--- a/ports/esp32/boards/UM_PROS3/sdkconfig.board
+++ b/ports/esp32/boards/UM_PROS3/sdkconfig.board
@@ -4,12 +4,3 @@ CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 CONFIG_SPIRAM_MEMTEST=

 CONFIG_LWIP_LOCAL_HOSTNAME="UMProS3"
-
-CONFIG_TINYUSB_DESC_CUSTOM_VID=0x303A
-CONFIG_TINYUSB_DESC_CUSTOM_PID=0x80D4
-CONFIG_TINYUSB_DESC_BCD_DEVICE=0x0100
-CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=n
-CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=n
-CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Unexpected Maker"
-CONFIG_TINYUSB_DESC_PRODUCT_STRING="ProS3"
-CONFIG_TINYUSB_DESC_SERIAL_STRING="_ps3_"
--- a/ports/esp32/boards/UM_RGBTOUCH_MINI/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_RGBTOUCH_MINI/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.240mhz
    boards/sdkconfig.spiram_sx
--- a/ports/esp32/boards/UM_RGBTOUCH_MINI/mpconfigboard.h
+++ b/ports/esp32/boards/UM_RGBTOUCH_MINI/mpconfigboard.h
@@ -8,3 +8,8 @@
 #define MICROPY_HW_SPI1_MOSI (35)
 #define MICROPY_HW_SPI1_MISO (37)
 #define MICROPY_HW_SPI1_SCK (36)
+
+#define MICROPY_HW_USB_VID 0x303A
+#define MICROPY_HW_USB_PID 0x81FF
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Unexpected Maker"
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "RGBTouchMini"
--- a/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board
+++ b/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board
@@ -5,12 +5,3 @@ CONFIG_ESPTOOLPY_AFTER_NORESET=y
 CONFIG_SPIRAM_MEMTEST=

 CONFIG_LWIP_LOCAL_HOSTNAME="UMRGBTouchMini"
-
-CONFIG_TINYUSB_DESC_CUSTOM_VID=0x303A
-CONFIG_TINYUSB_DESC_CUSTOM_PID=0x81FF
-CONFIG_TINYUSB_DESC_BCD_DEVICE=0x0100
-CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=n
-CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=n
-CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Unexpected Maker"
-CONFIG_TINYUSB_DESC_PRODUCT_STRING="RGBTouchMini"
-CONFIG_TINYUSB_DESC_SERIAL_STRING="_rgbtouch_mini_"
--- a/ports/esp32/boards/UM_TINYS2/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_TINYS2/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s2)
 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
    boards/sdkconfig.spiram_sx
-    boards/sdkconfig.usb
    boards/UM_TINYS2/sdkconfig.board
 )

--- a/ports/esp32/boards/UM_TINYS3/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_TINYS3/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.240mhz
    boards/sdkconfig.spiram_sx
--- a/ports/esp32/boards/UM_TINYS3/mpconfigboard.h
+++ b/ports/esp32/boards/UM_TINYS3/mpconfigboard.h
@@ -8,3 +8,8 @@
 #define MICROPY_HW_SPI1_MOSI                (35)
 #define MICROPY_HW_SPI1_MISO                (37)
 #define MICROPY_HW_SPI1_SCK                 (36)
+
+#define MICROPY_HW_USB_VID 0x303A
+#define MICROPY_HW_USB_PID 0x80D1
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Unexpected Maker"
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "TinyS3"
--- a/ports/esp32/boards/UM_TINYS3/sdkconfig.board
+++ b/ports/esp32/boards/UM_TINYS3/sdkconfig.board
@@ -4,12 +4,3 @@ CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 CONFIG_SPIRAM_MEMTEST=

 CONFIG_LWIP_LOCAL_HOSTNAME="UMTinyS3"
-
-CONFIG_TINYUSB_DESC_CUSTOM_VID=0x303A
-CONFIG_TINYUSB_DESC_CUSTOM_PID=0x80D1
-CONFIG_TINYUSB_DESC_BCD_DEVICE=0x0100
-CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=n
-CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=n
-CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Unexpected Maker"
-CONFIG_TINYUSB_DESC_PRODUCT_STRING="TinyS3"
-CONFIG_TINYUSB_DESC_SERIAL_STRING="_ts3_"
--- a/ports/esp32/boards/UM_TINYWATCHS3/mpconfigboard.cmake
+++ b/ports/esp32/boards/UM_TINYWATCHS3/mpconfigboard.cmake
@@ -2,7 +2,6 @@ set(IDF_TARGET esp32s3)

 set(SDKCONFIG_DEFAULTS
    boards/sdkconfig.base
-    boards/sdkconfig.usb
    boards/sdkconfig.ble
    boards/sdkconfig.240mhz
    boards/sdkconfig.spiram_sx
--- a/ports/esp32/boards/UM_TINYWATCHS3/mpconfigboard.h
+++ b/ports/esp32/boards/UM_TINYWATCHS3/mpconfigboard.h
@@ -8,3 +8,8 @@
 #define MICROPY_HW_SPI1_MOSI                (35)
 #define MICROPY_HW_SPI1_MISO                (37)
 #define MICROPY_HW_SPI1_SCK                 (36)
+
+#define MICROPY_HW_USB_VID 0x303A
+#define MICROPY_HW_USB_PID 0x81B1
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Unexpected Maker"
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "TinyWATCHS3"
--- a/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board
+++ b/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board
@@ -4,12 +4,3 @@ CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 CONFIG_SPIRAM_MEMTEST=

 CONFIG_LWIP_LOCAL_HOSTNAME="UMTinyWATCHS3"
-
-CONFIG_TINYUSB_DESC_CUSTOM_VID=0x303A
-CONFIG_TINYUSB_DESC_CUSTOM_PID=0x81B1
-CONFIG_TINYUSB_DESC_BCD_DEVICE=0x0100
-CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=n
-CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=n
-CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Unexpected Maker"
-CONFIG_TINYUSB_DESC_PRODUCT_STRING="TinyWATCHS3"
-CONFIG_TINYUSB_DESC_SERIAL_STRING="_tws3_"
--- a/ports/esp32/boards/sdkconfig.usb
+++ b/ports/esp32/boards/sdkconfig.usb
@@ -1,4 +0,0 @@
-CONFIG_USB_OTG_SUPPORTED=y
-CONFIG_TINYUSB_CDC_ENABLED=y
-CONFIG_TINYUSB_CDC_RX_BUFSIZE=256
-CONFIG_TINYUSB_CDC_TX_BUFSIZE=256
--- a/ports/esp32/esp32_common.cmake
+++ b/ports/esp32/esp32_common.cmake
@@ -97,6 +97,14 @@ if(MICROPY_PY_TINYUSB)
    list(APPEND MICROPY_INC_TINYUSB
        ${MICROPY_DIR}/shared/tinyusb/
    )
+
+    # Build the Espressif tinyusb component with MicroPython shared/tinyusb/tusb_config.h
+    idf_component_get_property(tusb_lib espressif__tinyusb COMPONENT_LIB)
+    target_include_directories(${tusb_lib} PRIVATE
+        ${MICROPY_DIR}/shared/tinyusb
+        ${MICROPY_DIR}
+        ${MICROPY_PORT_DIR}
+        ${MICROPY_BOARD_DIR})
 endif()

 list(APPEND MICROPY_SOURCE_PORT
--- a/ports/esp32/lockfiles/dependencies.lock.esp32
+++ b/ports/esp32/lockfiles/dependencies.lock.esp32
@@ -30,6 +30,6 @@ direct_dependencies:
 - espressif/lan867x
 - espressif/mdns
 - idf
-manifest_hash: 3b18b5bbac91c9fe5098d3759a37c84ed0828546d8cbc92e26e4c1698e689c8a
+manifest_hash: ea629d6996152d77801fb1acae35b27596fdc023a933d40287d80f98dc497b55
 target: esp32
 version: 2.0.0
--- a/ports/esp32/lockfiles/dependencies.lock.esp32c2
+++ b/ports/esp32/lockfiles/dependencies.lock.esp32c2
@@ -16,6 +16,6 @@ dependencies:
 direct_dependencies:
 - espressif/mdns
 - idf
-manifest_hash: 3b18b5bbac91c9fe5098d3759a37c84ed0828546d8cbc92e26e4c1698e689c8a
+manifest_hash: ea629d6996152d77801fb1acae35b27596fdc023a933d40287d80f98dc497b55
 target: esp32c2
 version: 2.0.0
--- a/ports/esp32/lockfiles/dependencies.lock.esp32c3
+++ b/ports/esp32/lockfiles/dependencies.lock.esp32c3
@@ -16,6 +16,6 @@ dependencies:
 direct_dependencies:
 - espressif/mdns
 - idf
-manifest_hash: 3b18b5bbac91c9fe5098d3759a37c84ed0828546d8cbc92e26e4c1698e689c8a
+manifest_hash: ea629d6996152d77801fb1acae35b27596fdc023a933d40287d80f98dc497b55
 target: esp32c3
 version: 2.0.0
--- a/ports/esp32/lockfiles/dependencies.lock.esp32c5
+++ b/ports/esp32/lockfiles/dependencies.lock.esp32c5
@@ -16,6 +16,6 @@ dependencies:
 direct_dependencies:
 - espressif/mdns
 - idf
-manifest_hash: 3b18b5bbac91c9fe5098d3759a37c84ed0828546d8cbc92e26e4c1698e689c8a
+manifest_hash: da32add5eb5e196ac97a99eb579025222ec572f5db4038873fbf9d3b9d6ed5a3
 target: esp32c5
 version: 2.0.0
--- a/ports/esp32/lockfiles/dependencies.lock.esp32c6
+++ b/ports/esp32/lockfiles/dependencies.lock.esp32c6
@@ -16,6 +16,6 @@ dependencies:
 direct_dependencies:
 - espressif/mdns
 - idf
-manifest_hash: 3b18b5bbac91c9fe5098d3759a37c84ed0828546d8cbc92e26e4c1698e689c8a
+manifest_hash: ea629d6996152d77801fb1acae35b27596fdc023a933d40287d80f98dc497b55
 target: esp32c6
 version: 2.0.0
--- a/ports/esp32/lockfiles/dependencies.lock.esp32s2
+++ b/ports/esp32/lockfiles/dependencies.lock.esp32s2
@@ -1,18 +1,4 @@
 dependencies:
-  espressif/esp_tinyusb:
-    component_hash: 96d232ced7afe1976119b62f7fbf1944a2a78b36228ff6f7b9318394ac1153cc
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=5.0'
-    - name: espressif/tinyusb
-      registry_url: https://components.espressif.com
-      require: public
-      version: '>=0.14.2'
-    source:
-      registry_url: https://components.espressif.com/
-      type: service
-    version: 1.7.6~1
  espressif/mdns:
    component_hash: 46ee81d32fbf850462d8af1e83303389602f6a6a9eddd2a55104cb4c063858ed
    dependencies:
@@ -30,7 +16,7 @@ dependencies:
      require: private
      version: '>=5.0'
    source:
-      registry_url: https://components.espressif.com
+      registry_url: https://components.espressif.com/
      type: service
    targets:
    - esp32s2
@@ -42,9 +28,9 @@ dependencies:
      type: idf
    version: 5.5.1
 direct_dependencies:
- espressif/esp_tinyusb
 - espressif/mdns
+- espressif/tinyusb
 - idf
-manifest_hash: 3b18b5bbac91c9fe5098d3759a37c84ed0828546d8cbc92e26e4c1698e689c8a
+manifest_hash: ea629d6996152d77801fb1acae35b27596fdc023a933d40287d80f98dc497b55
 target: esp32s2
 version: 2.0.0
--- a/ports/esp32/lockfiles/dependencies.lock.esp32s3
+++ b/ports/esp32/lockfiles/dependencies.lock.esp32s3
@@ -1,18 +1,4 @@
 dependencies:
-  espressif/esp_tinyusb:
-    component_hash: 96d232ced7afe1976119b62f7fbf1944a2a78b36228ff6f7b9318394ac1153cc
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=5.0'
-    - name: espressif/tinyusb
-      registry_url: https://components.espressif.com
-      require: public
-      version: '>=0.14.2'
-    source:
-      registry_url: https://components.espressif.com/
-      type: service
-    version: 1.7.6~1
  espressif/mdns:
    component_hash: 46ee81d32fbf850462d8af1e83303389602f6a6a9eddd2a55104cb4c063858ed
    dependencies:
@@ -30,7 +16,7 @@ dependencies:
      require: private
      version: '>=5.0'
    source:
-      registry_url: https://components.espressif.com
+      registry_url: https://components.espressif.com/
      type: service
    targets:
    - esp32s2
@@ -42,9 +28,9 @@ dependencies:
      type: idf
    version: 5.5.1
 direct_dependencies:
- espressif/esp_tinyusb
 - espressif/mdns
+- espressif/tinyusb
 - idf
-manifest_hash: 3b18b5bbac91c9fe5098d3759a37c84ed0828546d8cbc92e26e4c1698e689c8a
+manifest_hash: ea629d6996152d77801fb1acae35b27596fdc023a933d40287d80f98dc497b55
 target: esp32s3
 version: 2.0.0
--- a/ports/esp32/main/idf_component.yml
+++ b/ports/esp32/main/idf_component.yml
@@ -1,10 +1,10 @@
 ## IDF Component Manager Manifest File
 dependencies:
  espressif/mdns: "~1.1.0"
-  espressif/esp_tinyusb:
+  espressif/tinyusb:
    rules:
      - if: "target in [esp32s2, esp32s3]"
-    version: "~1.7.6"
+    version: "~0.18.0"
  espressif/lan867x:
    version: "~1.0.0"
    rules:
--- a/ports/esp32/mpconfigport.h
+++ b/ports/esp32/mpconfigport.h
@@ -223,19 +223,14 @@

 #ifndef MICROPY_HW_USB_VID
 #define USB_ESPRESSIF_VID 0x303A
-#if CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID
 #define MICROPY_HW_USB_VID  (USB_ESPRESSIF_VID)
-#else
-#define MICROPY_HW_USB_VID  (CONFIG_TINYUSB_DESC_CUSTOM_VID)
 #endif

 #ifndef MICROPY_HW_ENABLE_USB_RUNTIME_DEVICE
 #define MICROPY_HW_ENABLE_USB_RUNTIME_DEVICE    (1) // Support machine.USBDevice
 #endif
-#endif

 #ifndef MICROPY_HW_USB_PID
-#if CONFIG_TINYUSB_DESC_USE_DEFAULT_PID
 #define _PID_MAP(itf, n) ((CFG_TUD_##itf) << (n))
 // A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
 // Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
@@ -244,25 +239,16 @@
 #define USB_TUSB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
    _PID_MAP(MIDI, 3))  // | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) )
 #define MICROPY_HW_USB_PID  (USB_TUSB_PID)
-#else
-#define MICROPY_HW_USB_PID  (CONFIG_TINYUSB_DESC_CUSTOM_PID)
-#endif
 #endif

+// These Manufacturer & Product strings are the defaults when using the
+// esp_tinyusb component (which MicroPython used in the past).
 #ifndef MICROPY_HW_USB_MANUFACTURER_STRING
-#ifdef CONFIG_TINYUSB_DESC_MANUFACTURER_STRING
-#define MICROPY_HW_USB_MANUFACTURER_STRING CONFIG_TINYUSB_DESC_MANUFACTURER_STRING
-#else
-#define MICROPY_HW_USB_MANUFACTURER_STRING "MicroPython"
-#endif
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Espressif Systems"
 #endif

 #ifndef MICROPY_HW_USB_PRODUCT_FS_STRING
-#ifdef CONFIG_TINYUSB_DESC_PRODUCT_STRING
-#define MICROPY_HW_USB_PRODUCT_FS_STRING CONFIG_TINYUSB_DESC_PRODUCT_STRING
-#else
-#define MICROPY_HW_USB_PRODUCT_FS_STRING "Board in FS mode"
-#endif
+#define MICROPY_HW_USB_PRODUCT_FS_STRING "Espressif Device"
 #endif

 #endif // MICROPY_HW_ENABLE_USBDEV