This commit renames the "tests/frozen" directory into "tests/assets" to
make it more explicit that it does contain files that are needed for
other tests to function.
Right now there's only a single pre-compiled module being used for
miscellaneous tests, but it will soon hold ROMFS test data as well.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Assuming proper C99 language support, we can select "the int type as big as
a pointer" (most of the time) or "the 64-bit int type" (nanboxing with
REPR_D), and then define everything else automatically.
This simplifies port configuration files. And the types can still be
overridden if needed.
Signed-off-by: Jeff Epler <jepler@unpythonic.net>
This unix minimal variant already has a few other things enabled beyond the
default minimal configuration, and C-stack checking is arguably more
important than those, so enable it. This helps to get some of the stress
tests passing on this variant.
Signed-off-by: Damien George <damien@micropython.org>
This is a pretty fundamental module, and even minimal ports like unix and
zephyr minimal have it enabled. So, enabled it by default at the lowest
feature level.
Most things in the `sys` module are configurable, and off by default, so it
shouldn't add too much to ports that don't already have it enabled (which
is just the minimal port).
Also note that `sys` is still disabled on the bare-arm port, to keep that
ultra minimal. It means we now have bare-arm without `sys` and the minimal
port with `sys`. That will allow different code size comparisons if/when
new `sys` features are added.
Signed-off-by: Damien George <damien@micropython.org>
This commit unifies the configuration of MICROPY_PY_CRYPTOLIB,
MICROPY_PY_HASHLIB_MD5 and MICROPY_PY_HASHLIB_SHA1, so they are enabled by
default if MICROPY_PY_SSL is enabled. This matches the existing
configuration of most of the ports.
With this change, all ports remain the same except:
- reneses-ra now enables MICROPY_PY_CRYPTOLIB, MICROPY_PY_HASHLIB_MD5 and
MICROPY_PY_HASHLIB_SHA1.
- rp2 now enables MICROPY_PY_HASHLIB_MD5.
Signed-off-by: Damien George <damien@micropython.org>
There is currently no build using REPR_C in the unix CI tests. As
discussed in PR #16953, this is something that combines well with the
longlong build.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
The unix port can now be built with the GIL enabled, by passing
MICROPY_PY_THREAD_GIL=1 on the make command line.
Signed-off-by: Damien George <damien@micropython.org>
The unix coverage variant should have all features enabled, so they can be
tested for coverage. Therefore, enabled `MICROPY_PY_SYS_SETTRACE`.
Signed-off-by: Jeff Epler <jepler@gmail.com>
Test modified to reschedule itself based on a flag setting. Without the
change in the parent commit, this test executes the callback indefinitely
and hangs but with the change it runs only once each time
mp_handle_pending() is called.
Modified-by: Angus Gratton <angus@redyak.com.au>
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
In order to provide test coverage for the previous commit, `os.uname()`
support is added to the unix coverage build.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
This is a generic interface to allow querying and modifying the read-only
memory area of a device, if it has such an area.
Signed-off-by: Damien George <damien@micropython.org>
This simplifies configuration by removing the `MICROPY_PY_OS_SEP` option
and instead including `os.sep` if `MICROPY_VFS` is enabled. That matches
the configuration of all existing ports that enabled `os.sep` (they also
had `MICROPY_VFS` enabled), and brings consistency to other ports.
Fixes issue #15116.
Signed-off-by: Damien George <damien@micropython.org>
The current `ssl` module has quite a few differences to the CPython
implementation. This change moves the MicroPython variant to a new `tls`
module and provides a wrapper module for `ssl` (in micropython-lib).
Users who only rely on implemented comparible behavior can continue to use
`ssl`, while users that rely on non-compatible behavior should switch to
`tls`. Then we can make the facade in `ssl` more strictly adhere to
CPython.
Signed-off-by: Felix Dörre <felix@dogcraft.de>
This will apply to bare-arm and minimal, as well as the minimal unix
variant.
Change the default to MICROPY_QSTR_BYTES_IN_HASH=1 for the CORE,BASIC
levels, 2 for >=EXTRA.
Removes explicit setting of MICROPY_QSTR_BYTES_IN_HASH==1 in ports that
don't set the feature level (because 1 is implied by the default level,
CORE). Applies to cc3200, pic16bt, powerpc.
Removes explicit setting for nRF (which sets feature level). Also for samd,
which sets CORE for d21 and FULL for d51. This means that d21 is unchanged
with MICROPY_QSTR_BYTES_IN_HASH==1, but d51 now moves from 1 to 2 (roughly
adds 1kiB).
The only remaining port which explicitly set bytes-in-hash is rp2 because
it's high-flash (hence CORE level) but lowish-SRAM, so it's worthwhile
saving the RAM for runtime qstrs.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
A previous commit removed the unix-specific select module implementation
and made unix use the common one.
This commit adds an optimisation so that the system poll function is used
when polling objects that have a file descriptor. With this optimisation
enabled, if code registers both file-descriptor-based objects, and non-
file-descriptor-based objects with select.poll() then the following occurs:
- the system poll is called for all file-descriptor-based objects with a
timeout of 1ms
- then the bare-metal polling implementation is used for remaining objects,
which calls into their ioctl method (which can be in C or Python)
In the case where all objects have file descriptors, the system poll is
called with the full timeout requested by the caller. That makes it as
efficient as possible in the case everything has a file descriptor.
Benefits of this approach:
- all ports use the same select module implementation
- the unix port now supports polling of all objects and matches bare metal
implementations
- it's still efficient for existing cases where only files and sockets are
polled (on unix)
- the bare metal implementation does not change
- polling of SSL objects will now work on unix by calling in to the ioctl
method on SSL objects (this is required for asyncio ssl support)
Note that extmod/vfs_posix_file.c has poll disable when the optimisation is
enabled, because the code is not reachable when the optimisation is used.
Signed-off-by: Damien George <damien@micropython.org>
The unix port has a custom select module which only works with objects that
have a file descriptor, eg files and sockets. On the other hand, bare
metal ports use the common extmod/modselect.c implementation of the select
module that supports polling of arbitrary objects, as long as those objects
provide a MP_STREAM_POLL in their ioctl implementation (which can be done
in C or Python).
This commit removes the unix-specific code and makes unix use the common
one provided by extmod/modselect.c instead. All objects with file
descriptors implement MP_STREAM_POLL so they continue to work.
Signed-off-by: Damien George <damien@micropython.org>
The asyncio module now has much better CPython compatibility and
deserves to be just called "asyncio".
This will avoid people having to write `from uasyncio import asyncio`.
Renames all files, and updates port manifests to use the new path. Also
renames the built-in _uasyncio to _asyncio.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is a MicroPython-specific module that existed to support the old
version of uasyncio. It's undocumented and not enabled on all ports and
takes up code size unnecessarily.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Updates any includes, and references from Makefiles/CMake.
This essentially reverts what was done long ago in commit
136b5cbd76
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This adds a mechanism to track a pending notify/indicate operation that
is deferred due to the send buffer being full. This uses a tracked alloc
that is passed as the content arg to the callback.
This replaces the previous mechanism that did this via the global pending
op queue, shared with client read/write ops.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
mip-cmdline adds command-line support to mip, useful for the unix port, via
micropython -m mip ...
Signed-off-by: Damien George <damien@micropython.org>
Updates all README.md and docs, and manifests to `require("mip")`.
Also extend and improve the documentation on freezing and packaging.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This uses the frozentest.mpy that is also used by ports/minimal.
Also fixes two bugs that these new tests picked up:
- File extension matching in manifestfile.py.
- Handling of freeze_mpy results in makemanifest.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
All variants (except minimal) enable text compression and fat/lfs, so move
them to the common mpconfigport.mk.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is a no-op for coverage and minimal.
The standard and dev variants have been merged and enable the same feature
set as a typical bare-metal board. And remove the CI for the dev build.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The freedos variant is untested by CI and is difficult to maintain. The
fast variant is not a good name for what it does.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
make it behave the same as other ports (the board must set
FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
512k build in fbe9417b90.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
Since commit e65d1e69e8 there is no longer an
io.FileIO class, so this option is no longer needed.
This option also controlled whether or not files supported being opened in
binary mode (eg 'rb'), and could, if disabled, lead to confusion as to why
opening a file in binary mode silently did the wrong thing (it would just
open in text mode if MICROPY_PY_IO_FILEIO was disabled).
The various VFS implementations (POSIX, FAT, LFS) were the only places
where enabling this option made a difference, and in almost all cases where
one of these filesystems were enabled, MICROPY_PY_IO_FILEIO was also
enabled. So it makes sense to just unconditionally enable this feature
(ability to open a file in binary mode) in all cases, and so just remove
this config option altogether. That makes configuration simpler and means
binary file support always exists (and opening a file in binary mode is
arguably more fundamental than opening in text mode, so if anything should
be configurable then it should be the ability to open in text mode).
Signed-off-by: Damien George <damien@micropython.org>
The executable now lives in the build directory, and since the build
directory already contains the variant name there is no need to also add
it to the executable.
Signed-off-by: Damien George <damien@micropython.org>
With a new option to evenly split the GC heap over multiple areas. This
adds code coverage for gc_add() and code associated with
MICROPY_GC_SPLIT_HEAP.
All in-tree uses of MICROPY_PORT_ROOT_POINTERS have been replaced with
MP_REGISTER_ROOT_POINTER(), so now we can remove both
MICROPY_PORT_ROOT_POINTERS and MICROPY_BOARD_ROOT_POINTERS from the code
and remaining config files.
Signed-off-by: David Lechner <david@pybricks.com>
This ROM level is not yet fully defined, but it at least enables
MICROPY_PY_SYS_TRACEBACKLIMIT. The coverage build should have everything
enabled, so it makes sense to use this ROM level for it.
Signed-off-by: Damien George <damien@micropython.org>
So that the default configuration for the dev and coverage variants
includes all options set by MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES.
Note that enabling MICROPY_PY_SYS_STDIO_BUFFER on unix doesn't do anything
because unix doesn't use shared/runtime/sys_stdio_mphal.c.
Signed-off-by: Damien George <damien@micropython.org>
Alessandro Gatti
Jeff Epler
Damien George
Jeff Epler
Yoctopuce dev
Angus Gratton
Andrew Leech
Felix Dörre
Jim Mussared
Rob Knegjens
David Lechner