Assuming proper C99 language support, we can select "the int type as big as
a pointer" (most of the time) or "the 64-bit int type" (nanboxing with
REPR_D), and then define everything else automatically.
This simplifies port configuration files. And the types can still be
overridden if needed.
Signed-off-by: Jeff Epler <jepler@unpythonic.net>
machine.Timer() has inconsistent behaviour between ports: some run
callbacks in hard IRQ context whereas others schedule them like soft IRQs.
As on the rp2 port, add support to the renesas-ra port for a hard= argument
to explicitly choose between these, setting the default to True to match
the existing behaviour.
Signed-off-by: Chris Webb <chris@arachsys.com>
This factors code out of the ports and into the common `time.localtime`
implementation in `extmod/modtime.c`. That helps to reduce code
duplication, prevent errors in implementation, and reduce code size on
some ports (mimxrt and stm32 at least).
Signed-off-by: Damien George <damien@micropython.org>
This setting was missed in df05caea6c. It's
needed for this port to pass its `tests/ports/renesas-ra/modtime.py` test.
Signed-off-by: Damien George <damien@micropython.org>
This is code makes sure that time functions work properly on a
reasonable date range, on all platforms, regardless of the epoch.
The suggested minimum range is 1970 to 2099.
In order to reduce code footprint, code to support far away dates
is only enabled specified by the port.
New types are defined to identify timestamps.
The implementation with the smallest code footprint is when
support timerange is limited to 1970-2099 and Epoch is 1970.
This makes it possible to use 32 bit unsigned integers for
all timestamps.
On ARM4F, adding support for dates up to year 3000 adds
460 bytes of code. Supporting dates back to 1600 adds
another 44 bytes of code.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
Basic update to the renesas-ra port to replace the traditional
`MICROPY_EVENT_POLL_HOOK` with the newer mp_event_wait API as appropriate.
Signed-off-by: Andrew Leech <andrew@alelec.net>
Most extmod network drivers were being defined on a per-port basis,
duplicating code and making enabling a driver on a new port harder.
This consolidates extmod driver declarations and removes the existing
per-port definitions of them.
This commit has been verified to be a no-op in terms of firmware change.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
The vendor and product fields in the `board.json` files were somewhat
inconsistent. Remove any duplication of the vendor name in the product
field so that `f"{vendor} {product}"` reads well.
In addition to that, update most of the URL's for `board.json` files that
are modified here, and match case and spacing used by the manufacturers for
the vendor and product names.
Signed-off-by: Matt Trentini <matt.trentini@gmail.com>
Previously MicroPython ports would linker-wrap dcd_event_handler
in order to schedule the USB task callback to run when needed.
TinyUSB 0.16 added proper support for an event hook to do the
same thing without the hacky linker wrapping.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit renames the NORETURN macro, indicating to the compiler
that a function does not return, into MP_NORETURN to maintain the same
naming convention of other similar macros.
To maintain compaitiblity with existing code NORETURN is aliased to
MP_NORETURN, but it is also deprecated for MicroPython v2.
This changeset was created using a similar process to
decf8e6a8b ("all: Remove the "STATIC"
macro and just use "static" instead."), with no documentation or python
scripts to change to reflect the new macro name.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
A new module called renesas is added, like in other ports. The accessible
block device allows to use Python methods for creating and modifying the
file system. The Flash block device for the file system can be accessed
with:
from renesas import Flash
bdev = Flash(start=0)
Signed-off-by: robert-hh <robert@hammelrath.com>
The linker scripts for most of these microcontrollers contain a
non-contiguous flash section for the ID code that results in big binary
files, which exceed the flash size. This commit removes the ID code
section from the main firmware binary, and outputs it to a separate binary,
which can be deployed manually if ID code is enabled.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
This lwIP configuration file has options that are common to all ports, and
the ports are updated to use this file. This change is a no-op, the lwIP
configuration remains the same for the four ports using this common file.
This reduces code duplication, keeps the ports in sync, and makes it easier
to update the configuration for all ports at once.
Signed-off-by: Damien George <damien@micropython.org>
LFN type 2 uses the stack to allocate the internal working buffer for LFN,
which is thread-safe and saves about 512 bytes of BSS memory (at the
expense of needing that much memory on the stack).
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
lwIP was recently updated in a89ac9e24a
to STABLE-2_2_0_RELEASE, and this introduced a change in the configuration
variable `DHCP_DOES_ARP_CHECK`, renaming it to `LWIP_DHCP_DOES_ACD_CHECK`.
This commit fixes the ports lwIP settings to use the new configuration
option.
Without this option, connecting to a WiFi access-point takes about 12.5
seconds. With this option (ie disabling DHCP ARP checks) connecting takes
about 4 seconds.
Tested on an RPI_PICO_W and PYBD_SF2.
Signed-off-by: Damien George <damien@micropython.org>
Most ports using TinyUSB now schedule the USB tasks from the USB interrupt.
This commit updates the renesas-ra port to use this new pattern.
Signed-off-by: Andrew Leech <andrew@alelec.net>
The renesas-ra port board definitions contain auto-generated files which
are not easy to understand for someone unfamiliar with the port. This
commit adds some notes to the README to assist other developers who want to
work on these.
The configuration.xml file for the `ARDUINO_PORTENTA_C33` was provided by
@iabdalkader.
Signed-off-by: Andrew Leech <andrew@alelec.net>
Allowing to define the trigger UART.IRQ_RXIDLE as well as UART.IRQ_RX. The
delay for the IRQ_RXIDLE interrupt is about 3 character times or 1-2 ms,
whichever is larger.
The irq.flags() value is changed only with an expected event. Do not
change it otherwise.
Signed-off-by: robert-hh <robert@hammelrath.com>
The renesas-ra port supports calling a handler to be called on every byte
received by UART. For consistency with other ports, the symbol IRQ_RX
is added as the trigger name.
Side change: Add the received UART data to the REPL input buffer only if it
is the REPL UART. Otherwise, every UART would act as REPL input.
Signed-off-by: robert-hh <robert@hammelrath.com>
This simplifies configuration by removing the `MICROPY_PY_OS_SEP` option
and instead including `os.sep` if `MICROPY_VFS` is enabled. That matches
the configuration of all existing ports that enabled `os.sep` (they also
had `MICROPY_VFS` enabled), and brings consistency to other ports.
Fixes issue #15116.
Signed-off-by: Damien George <damien@micropython.org>
There are a few TinyUSB CDC functions used for stdio that are currently
replicated across a number of ports. Not surprisingly in a couple of cases
these have started to diverge slightly, with additional features added to
one of them.
This commit consolidates a couple of key shared functions used directly by
TinyUSB based ports, and makes those functions available to all.
Signed-off-by: Andrew Leech <andrew@alelec.net>
Disabled by default, but enabled on all boards that previously had
`MICROPY_PY_MACHINE_BARE_METAL_FUNCS` enabled.
Signed-off-by: Damien George <damien@micropython.org>
The STATIC macro was introduced a very long time ago in commit
d5df6cd44a. The original reason for this was
to have the option to define it to nothing so that all static functions
become global functions and therefore visible to certain debug tools, so
one could do function size comparison and other things.
This STATIC feature is rarely (if ever) used. And with the use of LTO and
heavy inline optimisation, analysing the size of individual functions when
they are not static is not a good representation of the size of code when
fully optimised.
So the macro does not have much use and it's simpler to just remove it.
Then you know exactly what it's doing. For example, newcomers don't have
to learn what the STATIC macro is and why it exists. Reading the code is
also less "loud" with a lowercase static.
One other minor point in favour of removing it, is that it stops bugs with
`STATIC inline`, which should always be `static inline`.
Methodology for this commit was:
1) git ls-files | egrep '\.[ch]$' | \
xargs sed -Ei "s/(^| )STATIC($| )/\1static\2/"
2) Do some manual cleanup in the diff by searching for the word STATIC in
comments and changing those back.
3) "git-grep STATIC docs/", manually fixed those cases.
4) "rg -t python STATIC", manually fixed codegen lines that used STATIC.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Because `mpthreadport.h` is included by `mpthread.h`.
Also remove unnecessary include of `mpthreadport.h` in esp32's `main.c`.
Signed-off-by: Damien George <damien@micropython.org>
For mimxrt, nrf, renesas-ra, rp2 and samd ports, this commit implements
similar behaviour to the stm32 port, where USB is only brought up after
boot.py completes execution.
Currently this doesn't add any useful functionality (and may break
workflows that depend on USB-CDC being live in boot.py), however it's a
precondition for more usable workflows with USB devices defined in
Python (allows setting up USB interfaces in boot.py before the device
enumerates for the first time).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Changes include:
- Some mbedtls source files renamed or deprecated.
- Our `mbedtls_config.h` files are renamed to `mbedtls_config_port.h`, so
they don't clash with mbedtls's new default configuration file named
`mbedtls_config.h`.
- MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE is deprecated.
- MBEDTLS_HAVE_TIME now requires an `mbedtls_ms_time` function to be
defined but it's only used for TLSv1.3 (currently not enabled in
MicroPython so there is a lazy implementation, i.e. seconds * 1000).
- `tests/multi_net/ssl_data.py` is removed (due to deprecation of
MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE), there are the existing
`ssl_cert_rsa.py` and `sslcontext_server_client.py` tests which do very
similar, simple SSL data transfer.
- Tests now use an EC key by default (they are smaller and faster), and the
RSA key has been regenerated due to the old PKCS encoding used by openssl
rsa command, see
https://stackoverflow.com/questions/40822328/openssl-rsa-key-pem-and-der-conversion-does-not-match
(and `tests/README.md` has been updated accordingly).
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
The standard Arduino pinout uses LEDR/G/B and LED_BUILTIN (if available).
This patch adds aliases to match the standard pinout, while retaining
LED_RED/GREEN/BLUE for compatibility with existing scripts and examples.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Switch the RTC clock source to Sub-clock (XCIN). This board has an
accurate LSE crystal, and it should be used for the RTC clock
source.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Following ad806df857 where the
MICROPY_PY_PENDSV_ENTER/REENTER/EXIT macro definitions were moved to
mphalport.h.
Signed-off-by: Damien George <damien@micropython.org>
MicroPython code may rely on the return value of sys.stdout.buffer.write()
to reflect the number of bytes actually written. While in most scenarios a
write() operation is successful, there are cases where it fails, leading to
data loss. This problem arises because, currently, write() merely returns
the number of bytes it was supposed to write, without indication of
failure.
One scenario where write() might fail, is where USB is used and the
receiving end doesn't read quickly enough to empty the receive buffer. In
that case, write() on the MicroPython side can timeout, resulting in the
loss of data without any indication, a behavior observed notably in
communication between a Pi Pico as a client and a Linux host using the ACM
driver.
A complex issue arises with mp_hal_stdout_tx_strn() when it involves
multiple outputs, such as USB, dupterm and hardware UART. The challenge is
in handling cases where writing to one output is successful, but another
fails, either fully or partially. This patch implements the following
solution:
mp_hal_stdout_tx_strn() attempts to write len bytes to all of the possible
destinations for that data, and returns the minimum successful write
length.
The implementation of this is complicated by several factors:
- multiple outputs may be enabled or disabled at compiled time
- multiple outputs may be enabled or disabled at runtime
- mp_os_dupterm_tx_strn() is one such output, optionally containing
multiple additional outputs
- each of these outputs may or may not be able to report success
- each of these outputs may or may not be able to report partial writes
As a result, there's no single strategy that fits all ports, necessitating
unique logic for each instance of mp_hal_stdout_tx_strn().
Note that addressing sys.stdout.write() is more complex due to its data
modification process ("cooked" output), and it remains unchanged in this
patch. Developers who are concerned about accurate return values from
write operations should use sys.stdout.buffer.write().
This patch might disrupt some existing code, but it's also expected to
resolve issues, considering that the peculiar return value behavior of
sys.stdout.buffer.write() is not well-documented and likely not widely
known. Therefore, it's improbable that much existing code relies on the
previous behavior.
Signed-off-by: Maarten van der Schrieck <maarten@thingsconnected.nl>
All ports using this common configuration already enable time/date
validation, so this commit is a no-op change.
Signed-off-by: Damien George <damien@micropython.org>
Also move MICROPY_PY_PENDSV_ENTER/REENTER/EXIT to mphalport.h, for ports
where these are not already there.
This helps separate the hardware implementation of these macros from the
MicroPython configuration (eg for renesas-ra and stm32, the IRQ static
inline helper functions can now be moved to irq.h).
Signed-off-by: Damien George <damien@micropython.org>
Minor changes for consistency are:
- nrf gains: unique_id(), freq() [they do nothing]
- samd: deepsleep() now resets after calling lightsleep()
- esp32: lightsleep()/deepsleep() no longer take kw arg "sleep", instead
it's positional to match others. also, passing 0 here will now do a 0ms
sleep instead of acting like nothing was passed.
reset_cause() no longer takes any args (before it would just ignore them)
- mimxrt: freq() with an argument and lightsleep() both raise
NotImplementedError
Signed-off-by: Damien George <damien@micropython.org>
