Default queue size is too small that it overflows easily if debugging
printfs are enabled. Increase TinyUSB event queue size to 128.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
The ROM partition is taken from the last part of the flash text section, so
the existing writable filesystem is untouched. VfsRom file system sizes:
- EK_RA4M1: 12K
- RA4M1_CLICKER: 12k
- EK_RA4W1: 64k
- EK_RA6M1: 64k
- EK_RA6M2: 256k
- VK_RA6M5: 384k
- ARDUINO_PORTENTA_C33: 256k
Tested with Weact RA4M1 core board with EK_RA4M1 firmware and EK_RA6M2.
Signed-off-by: robert-hh <robert@hammelrath.com>
Signed-off-by: Damien George <damien@micropython.org>
The vendor and product fields in the `board.json` files were somewhat
inconsistent. Remove any duplication of the vendor name in the product
field so that `f"{vendor} {product}"` reads well.
In addition to that, update most of the URL's for `board.json` files that
are modified here, and match case and spacing used by the manufacturers for
the vendor and product names.
Signed-off-by: Matt Trentini <matt.trentini@gmail.com>
The renesas-ra port board definitions contain auto-generated files which
are not easy to understand for someone unfamiliar with the port. This
commit adds some notes to the README to assist other developers who want to
work on these.
The configuration.xml file for the `ARDUINO_PORTENTA_C33` was provided by
@iabdalkader.
Signed-off-by: Andrew Leech <andrew@alelec.net>
Changes include:
- Some mbedtls source files renamed or deprecated.
- Our `mbedtls_config.h` files are renamed to `mbedtls_config_port.h`, so
they don't clash with mbedtls's new default configuration file named
`mbedtls_config.h`.
- MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE is deprecated.
- MBEDTLS_HAVE_TIME now requires an `mbedtls_ms_time` function to be
defined but it's only used for TLSv1.3 (currently not enabled in
MicroPython so there is a lazy implementation, i.e. seconds * 1000).
- `tests/multi_net/ssl_data.py` is removed (due to deprecation of
MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE), there are the existing
`ssl_cert_rsa.py` and `sslcontext_server_client.py` tests which do very
similar, simple SSL data transfer.
- Tests now use an EC key by default (they are smaller and faster), and the
RSA key has been regenerated due to the old PKCS encoding used by openssl
rsa command, see
https://stackoverflow.com/questions/40822328/openssl-rsa-key-pem-and-der-conversion-does-not-match
(and `tests/README.md` has been updated accordingly).
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
The standard Arduino pinout uses LEDR/G/B and LED_BUILTIN (if available).
This patch adds aliases to match the standard pinout, while retaining
LED_RED/GREEN/BLUE for compatibility with existing scripts and examples.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Switch the RTC clock source to Sub-clock (XCIN). This board has an
accurate LSE crystal, and it should be used for the RTC clock
source.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
This commit changes the Arduino board identifiers to correspond to their
official names. This helps to identify boards at runtime. At the moment
the Arduino Portenta H7 is reported as PORTENTA which is unfortunate as now
there is another Portenta board (Portenta C33) supported in MicroPython.
Also made the other identifiers for flash and network name consistent,
removed the incorrectly used MICROPY_PY_SYS_PLATFORM identifiers, and added
missing MICROPY_PY_NETWORK_HOSTNAME_DEFAULT identifiers.
Boards affected:
- stm32: ARDUINO_PORTENTA_H7, ARDUINO_GIGA, ARDUINO_NICLA_VISION
- renesas-ra: ARDUINO_PORTENTA_C33
- esp32: ARDUINO_NANO_ESP32
- rp2: ARDUINO_NANO_RP2040_CONNECT
Signed-off-by: Sebastian Romero <s.romero@arduino.cc>
Applies to newly-added ARDUINO_PORTENTA_C33 and UM_NANOS3.
Makes the list match the standard features defined in
24a6e951ec.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
