Assuming proper C99 language support, we can select "the int type as big as
a pointer" (most of the time) or "the 64-bit int type" (nanboxing with
REPR_D), and then define everything else automatically.
This simplifies port configuration files. And the types can still be
overridden if needed.
Signed-off-by: Jeff Epler <jepler@unpythonic.net>
This board has plenty of RAM, flash, and peripherals, including Ethernet.
It also has a microSD slot, which also works.
Access to the REPL is via UART1, which is available via the DAPLink
connector J23.
Signed-off-by: Ned Konz <ned@metamagix.tech>
This commit adds Zephyr support for the XIAO BLE NRF52840 SENSE board from
Seeed Studio.
It also provides a good example of a richer Zephyr port than the default,
adding:
- Frozen modules (including asyncio, upysh, aioble and aiorepl).
- Enough MicroPython features to support using aioble (at least for the
`temp_sensor.py` example).
- JSON, random, re, struct, etc.
Signed-off-by: Ned Konz <ned@metamagix.tech>
This commit changes the values in the `FlashArea.areas` dictionary from
simple integer IDs to (ID, erase-block-size) tuples.
`_boot.py` was changed to use the newly available erase block size.
Signed-off-by: Ned Konz <ned@metamagix.tech>
Existing C code in `main.c` only mounts a flash filesystem if one exists,
and doesn't do anything if the 'storage' partition is not formatted.
This commit moves the mounting logic from `main.c` to frozen code using
`modules/_boot.py` and adds the formatting of a previously unformatted
partition if the mount fails.
Every available disk (in the newly added `DiskAccess.disks` tuple) will be
mounted on separate mount points (if they're formatted), and the 'storage'
flash partition (if any) will be mounted on /flash (and will be formatted
as LFS2 if necessary).
Also, `sys.path` will be updated with appropriate 'lib' subdirectories for
each mounted filesystem.
The current working directory will be changed to the last `DiskAccess.disk`
mounted, or to /flash if no disks were mounted.
Then `boot.py` and `main.py` will be executed from the current working
directory if they exist.
Thanks to @VynDragon for the logic in `zephyr/zephyr_storage.c`.
Signed-off-by: Ned Konz <ned@metamagix.tech>
Add support for PocketBeagle 2 rev A0 m4. Since it has 256K of SRAM (split
into 192K instruction and 64K data regions), some things need to be
disabled in MicroPython to make it fit.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
This commit adds `Sensor.attr_set()` and `Sensor.attr_get_*()` methods that
are necessary to set various sensor attributes if they haven't been set
statically in the device tree.
This is needed, for example, because the LSM6DS3TR-C sensor on the XIAO BLE
NRF52840 SENSE board will not work with `zsensor` because it doesn't have
any default configuration for sampling frequency.
Various `SENSOR_ATTR_*` constants from
`zephyr/incude/zephyr/drivers/sensor.h` have been added as `ATTR_*`
constants in the `zsensor` module.
Signed-off-by: Ned Konz <ned@metamagix.tech>
This commit adds support for ADC peripherals in the Zephyr port.
As is typical for Zephyr, the ADC channel setup is done in the devicetree
(typically using an overlay). This code requires ADC channels to be listed
in the io-channels property of the zephyr,user root node.
Signed-off-by: Ned Konz <ned@metamagix.tech>
On the zephyr port, hard IRQ handlers run with a separate stack on a
different thread, so each call to mp_irq_dispatch() and mp_irq_handler()
has to be wrapped with adjustments to the stack-limit checker.
Move these adjustments into the shared mp_irq_dispatch(), introducing
MICROPY_STACK_SIZE_HARD_IRQ which a port can define to non-zero if it
uses a separate stack for hard IRQ handlers. We only need wrap the hard
dispatch case. This should reduce binary size on zephyr without affecting
other ports.
Signed-off-by: Chris Webb <chris@arachsys.com>
machine.Timer() has inconsistent behaviour between ports: some run
callbacks in hard IRQ context whereas others schedule them like soft IRQs.
As on the rp2 port, add support to the zephyr port for a hard= argument
to explicitly choose between these, setting the default to False to match
the existing behaviour.
Adjust the stack-limit check to use the ISR stack while the callback is
dispatched so that hard IRQ callbacks work, as with machine_pin.c and
machine_i2c_target.c IRQ callbacks.
Signed-off-by: Chris Webb <chris@arachsys.com>
This is a pretty fundamental module, and even minimal ports like unix and
zephyr minimal have it enabled. So, enabled it by default at the lowest
feature level.
Most things in the `sys` module are configurable, and off by default, so it
shouldn't add too much to ports that don't already have it enabled (which
is just the minimal port).
Also note that `sys` is still disabled on the bare-arm port, to keep that
ultra minimal. It means we now have bare-arm without `sys` and the minimal
port with `sys`. That will allow different code size comparisons if/when
new `sys` features are added.
Signed-off-by: Damien George <damien@micropython.org>
Updates the Zephyr port build instructions and CI to use the latest
Zephyr release tag.
Tested on max32690fthr and frdm_k64f.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
This commit adjusts the configuration of the standard zephyr build to use
MICROPY_CONFIG_ROM_LEVEL_BASIC_FEATURES. That's a lot cleaner than
explicitly enabling/disabling options, and allows boards to more easily
fine-tune the settings, eg select a different feature level.
Features that are now enabled are:
- async/await keyword support
- `filter`, `property` and `reversed` builtins
- `range` attributes
- `str.count()` method
- `array` module with `array.array` object
- `collections` module with `collections.namedtuple` object
- `struct` module with everything
- `id = const()` and constant folding in the compiler
Bulding qemu_cortex_m3, the code size was originally:
Memory region Used Size Region Size %age Used
FLASH: 193864 B 256 KB 73.95%
RAM: 61992 B 64 KB 94.59%
and with this commit it is now:
Memory region Used Size Region Size %age Used
FLASH: 200698 B 256 KB 76.56%
RAM: 61992 B 64 KB 94.59%
That's a mild increase of +6834 bytes flash usage for a good selection of
new features.
Signed-off-by: Damien George <damien@micropython.org>
This commit adjusts the configuration of the minimal zephyr build to use
MICROPY_CONFIG_ROM_LEVEL_MINIMUM. That's a lot cleaner than explicitly
enabling/disabling options.
Prior to this change the minimal build for qemu_cortex_m3 had size:
Memory region Used Size Region Size %age Used
FLASH: 114436 B 256 KB 43.65%
RAM: 26320 B 64 KB 40.16%
and had the following test results (running using the CI settings, ie
`-d basics float --exclude inf_nan_arith`):
352 tests performed (7092 individual testcases)
352 tests passed
254 tests skipped: ...
With the changes here the qemu_cortex_m3 size is now:
Memory region Used Size Region Size %age Used
FLASH: 99428 B 256 KB 37.93%
RAM: 26312 B 64 KB 40.15%
That's a good decrease of about 15k firmware size. And the test suite
still passes with:
342 tests performed (6776 individual testcases)
341 tests passed
265 tests skipped: ...
Signed-off-by: Damien George <damien@micropython.org>
Some targets like frdm_k64f don't support GPIO_OUTPUT|GPIO_INPUT, so just
use GPIO_OUTPUT in those cases (it seems they still support reading the
current output state even when configured only as GPIO_OUTPUT, unlike other
targets which require both settings).
Signed-off-by: Damien George <damien@micropython.org>
With a default of -1, for soft timer. This matches other ports, and the
`extmod/machine_timer.c` implementation.
This change allows the `tests/extmod/machine_soft_timer.py` test to pass.
Signed-off-by: Damien George <damien@micropython.org>
Although the rpi_pico can already build and run with the zephyr port, this
configuration improves it in a number of ways:
- Use the USB CDC ACM as the REPL, rather than just a UART.
- Enable I2C and SPI, and add I2C1.
- Enable a filesystem, which matches exactly the rp2 port's RPI_PICO
configuration. So switching between zephyr and rp2 is possible and will
retain the filesystem.
- Make the MicroPython GC heap make the most use of the available RAM.
Signed-off-by: Damien George <damien@micropython.org>
Bluetooth works well now on this board, so enable all supported features.
Also increase the MicroPython GC heap size to make use of the available
RAM.
Unfortunately the filesystem does not match the stm32 port's NUCLEO_WB55
configuration. That's not possible to do because stm32 uses a 512 byte
flash erase size, while zephyr uses 4096 bytes. But at least here in
zephyr there's now a sizable and usable filesystem.
Signed-off-by: Damien George <damien@micropython.org>
Support for importing .mpy files is quite fundamental to MicroPython these
days, eg it allows installing more efficient .mpy code via "mip install"
(and installing `unittest` only works with the .mpy version because the .py
version uses f-strings, which are not enabled on the zephyr port). So
enable it generally for use by all boards.
As part of this, also enable:
- min/max: needed by `micropython/import_mpy_invalid.py`, and widely used
- sys.modules: needed by `run-tests.py` to run .mpy tests with --via-mpy
- io module: needed to run .mpy tests, and useful for `io.IOBase`
- array slice assign: needed to run .mpy tests, and generally useful as a
way to do a memory copy.
Signed-off-by: Damien George <damien@micropython.org>
There are two changes here:
1. Increase the UART input bufffer to 512 bytes. That's necessary to get
basic REPL reliability tests working, and helps improve `mpremote`
usage, eg copying large files.
2. Remove `uart_sem` semaphore. This is no longer needed because
`zephyr_getchar()` should be fully non-blocking and have as low a
latency as possible. `mp_hal_stdin_rx_chr()` (which calls
`zephyr_getchar`) already uses `MICROPY_EVENT_POLL_HOOK` to get
an efficient wait, and doing an extra wait and check for the
semaphore in `zephyr_getchar()` just introduces unnecessary latency and
can lead to slower input, and potentially overflowing the UART input
buffer.
Signed-off-by: Damien George <damien@micropython.org>
This change enables `sys.stdin`, `sys.stdout` and `sys.stderr` objects.
They are useful for general IO, and also help with testing zephyr boards.
Signed-off-by: Damien George <damien@micropython.org>
If there is a filesystem available, this change makes sure there is a "lib"
in `sys.path`, eg so that "mip install" works correctly.
Signed-off-by: Damien George <damien@micropython.org>
Changes here make the zephyr port act the same as other ports for the
start up and shut down sequence:
- `boot.py` is executed if it exists, and can force a soft reset
- `main.py` is only executed if in friendly REPL and if `boot.py` executed
successfully; and it can also force a soft reset
- print "MPY: " before "soft reboot" on soft reset
Signed-off-by: Damien George <damien@micropython.org>
Most boards enable the UART console because it's needed for USB (where USB
CDC creates a virtual UART), and for ctrl-C to work.
The `prj_minimal.conf` settings still use CONSOLE_SUBSYS.
Fixes issue #17608.
Signed-off-by: Damien George <damien@micropython.org>
Zephyr allows setting both GPIO_OUTPUT and GPIO_INPUT on a pin, which means
it's an output pin that can have its current value read.
Fixes issue #17596.
Signed-off-by: Damien George <damien@micropython.org>
Before this commit the UART would only work in very simple use cases.
Receiving large amounts of data would result in lost bytes. Plus the print
function would crash due to `uart_config_get()` returning incorrect values.
Additionally, receiving data with `timeout==0` would fail even if data was
already available in the internal UART Rx FIFO.
This commit fixes those issues. The non-implemented functions have also
been made usable.
Signed-off-by: Daniel Campora <danicampora@gmail.com>
Since MicroPython supports Zephyr v4.0.0, no need for overlay to enable
PWM. It is enabled by default for a while now.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
If the BLE radio stops responding before deinit is called the function can
get stuck waiting for an event that is never received, particularly if the
radio is external or on a separate core.
This commit adds a timeout, similar to the timeout already used in the init
function. Updated for nimble, btstack, esp32 and zephyr bindings.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
