lwIP was recently updated in a89ac9e24a
to STABLE-2_2_0_RELEASE, and this introduced a change in the configuration
variable `DHCP_DOES_ARP_CHECK`, renaming it to `LWIP_DHCP_DOES_ACD_CHECK`.
This commit fixes the ports lwIP settings to use the new configuration
option.
Without this option, connecting to a WiFi access-point takes about 12.5
seconds. With this option (ie disabling DHCP ARP checks) connecting takes
about 4 seconds.
Tested on an RPI_PICO_W and PYBD_SF2.
Signed-off-by: Damien George <damien@micropython.org>
The initial problem with a wrong ICMP checksum was caused by
the test code setting a checksum and the HW taking that probably as
the start value and ending up with 0xffff. With a checksum field of 0
set by the test code the HW creates the proper checksum.
This commit implements 10/100 Mbit Ethernet support in the mimxrt port.
The following boards are configured without ETH network:
- MIMXRT1010_EVK
- Teensy 4.0
The following boards are configured with ETH network:
- MIMXRT1020_EVK
- MIMXRT1050_EVK
- MIMXRT1060_EVK
- MIMXRT1064_EVK
- Teensy 4.1
Ethernet support tested with TEENSY 4.1, MIMRTX1020_EVK and MIMXRT1050_EVK.
Build tested with Teensy 4.0 and MIMXRT1010_EVK to be still working.
Compiles and builds properly for MIMXRT1060_EVK and MIMXRT1064_EVK, but not
tested lacking suitable boards.
Tested functions are:
- ping works bothway
- simple UDP transfer works bothway
- ntptime works
- the ftp server works
- secure socker works
- telnet and webrepl works
The MAC address is 0x02 plus 5 bytes from the manifacturing info field,
which can be considered as unique per device.
Some boards do not wire the RESET and INT pin of the PHY transceiver. For
operation, these are not required. If they are defined, they will be used.
