16 Commits

Author	SHA1	Message	Date
Chris Webb	8f85edad86	tests/ports/rp2: Add tests for rp2-specific timer options. ... Add tests for both one-shot and periodic timers using the rp2-specific tick_hz= and hard= parameters. Signed-off-by: Chris Webb <chris@arachsys.com>	2025-06-16 12:35:51 +01:00
Angus Gratton	69993daa5c	rp2/modmachine: Add mutual exclusion for machine.lightsleep(). ... There's no specified behaviour for what should happen if both CPUs call `lightsleep()` together, but the latest changes could cause a permanent hang due to a race in the timer cleanup code. Add a flag to prevent hangs if two threads accidentally lightsleep, at least. This allows the new lightsleep test to pass on RPI_PICO and RPI_PICO2, and even have much tighter time deltas. However, the test still fails on wireless boards where the lwIP tick wakes them up too frequently. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2025-05-12 16:30:46 +10:00
Angus Gratton	977fd94856	tests/ports/rp2: Add a test case for light sleeping from CPU1. ... Not currently passing. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2025-05-12 16:30:38 +10:00
Peter Harper	03da15575f	tests/ports/rp2: Update machine idle test to revert skip for RP2350. ... This reverts commit b42bb911c6. Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2025-05-12 16:29:51 +10:00
Damien George	00a0cd70f5	tests/ports/rp2: Tune rp2.DMA test so it runs in all configurations. ... Changes in this commit: - Allow the DMA instance to be any instance, not just DMA(0); eg WLAN may be using DMA(0). - Make the DMA timing test run a little faster by preloading `dma.active`. - Run the DMA timing test 10 times and take the average time taken as the test result, to eliminate any big effects of caching. - Change the expected time to `range(30, 80)` to cover RP2040, RP2350, RISC-V variants, and both bytecode and native emitter. - Add a `sleep_ms(1)` after waiting for the IRQ to fire, so that any scheduled code gets a chance to run when the test is compiled with the native emitter. With these changes this test passes reliably on RPI_PICO, RPI_PICO_W, RPI_PICO2, RPI_PICO2_W, RPI_PICO2-RISCV and RPI_PICO2_W-RISCV, in both bytecode and native emitter mode, with and without WLAN enabled. Signed-off-by: Damien George <damien@micropython.org>	2025-05-01 13:18:28 +10:00
Damien George	ffd7e0e28d	tests/ports/rp2: Convert rp2.DMA test to a unittest. ... This test is rather complicated and benefits from being a unittest. Signed-off-by: Damien George <damien@micropython.org>	2025-05-01 13:18:28 +10:00
Mike Bell	3699cf5f38	rp2/rp2_flash: Workaround multicore lockout not being reset. ... With regression test. See upstream bug https://github.com/raspberrypi/pico-sdk/issues/2201 Tested-by: Angus Gratton <angus@redyak.com.au> Signed-off-by: Mike Bell <mdb036@gmail.com>	2025-02-07 12:13:34 +11:00
Damien George	81ab49a607	tests/ports/rp2: Add test for SLEEP_ENx registers over lightsleep. ... Signed-off-by: Damien George <damien@micropython.org>	2025-02-07 11:53:16 +11:00
Peter Harper	a93762a762	rp2/modmachine: Fix USB sleep on RP2350 MCUs. ... Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:30 +11:00
Damien George	b42bb911c6	tests/ports/rp2: Update lightsleep/machine_idle to skip on RP2350. ... Signed-off-by: Damien George <damien@micropython.org>	2024-10-15 12:23:06 +11:00
Damien George	651b63cd79	tests/ports/rp2: Add simple rp2-specific UART test. ... To test construction of UART instances. Signed-off-by: Damien George <damien@micropython.org>	2024-10-15 12:23:06 +11:00
Damien George	fda7ae83a8	tests/ports/rp2: Update DMA test to work on RP2350. ... Signed-off-by: Damien George <damien@micropython.org>	2024-10-15 12:21:10 +11:00
Angus Gratton	ba98533454	rp2: Stop machine.idle() blocking indefinitely. ... Updates rp2 port to always resume from idle within 1ms max. When rp2 port went tickless the behaviour of machine.idle() changed as there is no longer a tick interrupt to wake it up every millisecond. On a quiet system it would now block indefinitely. No other port does this. See parent commit for justification of why this change is useful. Also adds a test case that fails without this change. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-07-23 16:46:27 +10:00
Angus Gratton	068d9bf2cf	rp2: Fix USB PLL glitch during wake from light sleep. ... Follow-up to a84c7a0ed9, this commit works most of the time but has an intermittent bug where USB doesn't resume as expected after waking from light sleep. Turns out waking calls clocks_init() which will re-initialise the USB PLL. Most of the time this is OK but occasionally it seems like the clock glitches the USB peripheral and it stops working until the next hard reset. Adds a machine.lightsleep() test that consistently hangs in the first two dozen iterations on rp2 without this fix. Passed over 100 times in a row with this fix. The test is currently rp2-only as it seems similar lightsleep USB issues exist on other ports (both pyboard and ESP32-S3 native USB don't send any data to the host after waking, until they receive something from the host first.) This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-06-25 16:25:19 +10:00
Damien George	2d7fb9a715	tests/ports/rp2/rp2_dma.py: Tweak test to be more reliable. ... The timing of the DMA transfer can vary a bit, so tweak the allowed values. Also test the return value of `rp2.DMA.irq.flags()` to make sure the IRQ is correctly signalled. Signed-off-by: Damien George <damien@micropython.org>	2024-01-30 12:50:19 +11:00
Damien George	50b809c8e8	tests/ports/rp2: Add rp2-specific tests with a test for rp2.DMA. ... Signed-off-by: Damien George <damien@micropython.org>	2024-01-22 11:49:20 +11:00