This commit makes it so that PyProxy objects are reused (on the JavaScript
side) when they correspond to an existing Python object that is the same
object.
For example, proxying the same Python function to JavaScript, the same
PyProxy instance is now used. This means that if `foo` is a Python
function then accessing it on the JavaScript side such as
`api.globals().get("foo")` has the property that:
api.globals().get("foo") === api.globals().get("foo")
Prior to this commit the above was not true because new PyProxy instances
were created each time `foo` was accessed.
Signed-off-by: Damien George <damien@micropython.org>
Follow up to 2e852522b1: instead of having
.exp files for the get_event_loop tests, tweak them so they are compatible
with CPython 3.12. This requires calling `asyncio.set_event_loop()` so
there is an active event loop and `asyncio.get_event_loop()` succeeds
without a warning.
Signed-off-by: Damien George <damien@micropython.org>
A target may have enough RAM to run the n=433 test but then run out of RAM
on the n=432 test. So allow the test to skip on the n=432 case before it
prints any output.
Signed-off-by: Damien George <damien@micropython.org>
Because the main thread executes `thread_entry()` it means there's an
additional one added to `count`, so the test must wait for the count to
reach `n_thread + 1`.
Signed-off-by: Damien George <damien@micropython.org>
Before this change, long/mpz ints propagated into all future calculations,
even if their value could fit in a small-int object. With this change, the
result of a big-int binary op will now be converted to a small-int object
if the value fits in a small-int.
For example, a relatively common operation like `x = a * b // c` where
a,b,c all small ints would always result in a long/mpz int, even if it
didn't need to, and then this would impact all future calculations with
x.
This adds +24 bytes on PYBV11 but avoids heap allocations and potential
surprises (e.g. `big-big` is now a small `0`, and can safely be accessed
with MP_OBJ_SMALL_INT_VALUE).
Performance tests are unchanged on PYBV10, except for `bm_pidigits.py`
which makes heavy use of big-ints and gains about 8% in speed.
Unix coverage tests have been updated to cover mpz code that is now
unreachable by normal Python code (removing the unreachable code would lead
to some surprising gaps in the internal C functions and the functionality
may be needed in the future, so it is kept because it has minimal
overhead).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
In JavaScript when accessing an attribute such as `obj.attr` a value of
`undefined` is returned if the attribute does not exist. This is unlike
Python semantics where an `AttributeError` is raised. Furthermore, in some
cases in JavaScript (eg a Proxy instance) `attr in obj` can return false
yet `obj.attr` is still valid and returns something other than `undefined`.
So the source of truth for whether a JavaScript attribute exists is to just
right away attempt `obj.attr`.
To more closely match these JavaScript semantics when proxying a JavaScript
object through to Python, change the attribute lookup logic on a `JsProxy`
so that it immediately attempts `obj.attr` instead of first testing if the
attribute exists via `attr in obj`.
This allows JavaScript objects which dynamically create attributes to work
correctly on the Python side, with both `obj.attr` and `obj["attr"]`. Note
that `obj["attr"]` already works in all cases because it immediately does
the subscript access without first testing if the attribute exists.
As a benefit, this new behaviour matches the Pyodide behaviour.
Signed-off-by: Damien George <damien@micropython.org>
Follow-up to a84c7a0ed9, this commit works most of the time but has an
intermittent bug where USB doesn't resume as expected after waking from
light sleep.
Turns out waking calls clocks_init() which will re-initialise the USB PLL.
Most of the time this is OK but occasionally it seems like the clock
glitches the USB peripheral and it stops working until the next hard reset.
Adds a machine.lightsleep() test that consistently hangs in the first
two dozen iterations on rp2 without this fix. Passed over 100 times in a
row with this fix.
The test is currently rp2-only as it seems similar lightsleep USB issues
exist on other ports (both pyboard and ESP32-S3 native USB don't send any
data to the host after waking, until they receive something from the host
first.)
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
mp_thread_begin_atomic_section() is expected to be recursive (i.e. for
nested machine.disable_irq() calls, or if Python code calls disable_irq()
and then the Python runtime calls mp_handle_pending() which also enters an
atomic section to check the scheduler state).
On rp2 when not using core1 the atomic sections are recursive.
However when core1 was active (i.e. _thread) then there was a bug that
caused the core to live-lock if an atomic section recursed.
Adds a test case specifically for mutual exclusion and recursive atomic
sections when using two threads. Without this fix the test immediately
hangs on rp2.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Fixes and improvements to `int.to_bytes()` are:
- No longer overflows if byte size is 0 (closes#13041).
- Raises OverflowError in any case where number won't fit into byte length
(now matches CPython, previously MicroPython would return a truncated
bytes object).
- Document that `micropython int.to_bytes()` doesn't implement the optional
signed kwarg, but will behave as if `signed=True` when the integer is
negative (this is the current behaviour). Add tests for this also.
Requires changes for small ints, MPZ large ints, and "long long" large
ints.
Adds a new set of unit tests for ints between 32 and 64 bits to increase
coverage of "long long" large ints, which are otherwise untested.
Tested on unix port (64 bit small ints, MPZ long ints) and Zephyr STM32WB
board (32 bit small ints, long long large ints).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The code generating the entry to the finally handler of an async-with
statement was simply wrong for the case of the native emitter. Among other
things the layout of the stack was incorrect.
This is fixed by this commit. The setup of the async-with finally handler
is now put in a dedicated emit function, for both the bytecode and native
emitters to implement in their own way (the bytecode emitter is unchanged,
just factored to a function).
With this fix all of the async-with tests now work when using the native
emitter.
Signed-off-by: Damien George <damien@micropython.org>
A value thrown/injected into a native generator needs to be stored in a
dedicated variable outside `nlr_buf_t`, following the `inject_exc` variable
in `py/vm.c`.
Signed-off-by: Damien George <damien@micropython.org>
Otherwise GC stays disabled (not re-enabled by soft reset) and later test
runs fail with MemoryError.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This allows increasing the Python recursion depth if needed.
Also increase the default to 2k words. There is enough RAM in the
browser/node context for this to be increased, and having a larger pystack
allows more complex code to run without hitting the limit.
Signed-off-by: Damien George <damien@micropython.org>
In the webassembly port there is no asyncio run loop running at the top
level. Instead the Python asyncio run loop is scheduled through setTimeout
and run by the outer JavaScript event loop. Because tasks can become
runable from an external (to Python) event (eg a JavaScript callback), the
run loop must be scheduled whenever a task is pushed to the asyncio task
queue, otherwise tasks may be waiting forever on the queue.
Signed-off-by: Damien George <damien@micropython.org>
This change allows doing a top-level await on an asyncio primitive like
Task and Event.
This feature enables a better interaction and synchronisation between
JavaScript and Python, because `api.runPythonAsync` can now be used (called
from JavaScript) to await on the completion of asyncio primitives.
Signed-off-by: Damien George <damien@micropython.org>
This adds a QEMU-based bare metal RISC-V 32 bits port. For the time being
only QEMU's "virt" 32 bits board is supported, using the ilp32 ABI and the
RV32IMC architecture.
The top-level README and the run-tests.py files are updated for this new
port.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
If the socket timeout is 0 then a failed socket.connect() raises
EINPROGRESS (which is what the lwIP bindings already did), but if the
socket timeout is non-zero then a failed socket.connect() should raise
ETIMEDOUT. The latter is fixed in this commit.
A test is added for these timeout cases.
Signed-off-by: Damien George <damien@micropython.org>
Support for raw str/bytes already exists, and extending that to raw
f-strings is easy. It also reduces code size because it eliminates an
error message.
Signed-off-by: Damien George <damien@micropython.org>
This is quite a simple and small change to support concatenation of
adjacent f-strings, and improve compatibility with CPython.
Signed-off-by: Damien George <damien@micropython.org>
In CPython 3.12 these invalid str/bytes/fstring escapes will issue a
SyntaxWarning, and so differ to MicroPython.
Signed-off-by: Damien George <damien@micropython.org>
Otherwise CPython gives a deprecation warning.
This test is not actually testing inversion of bools, rather that bit of
the test is used to compute the pass/fail result.
Signed-off-by: Damien George <damien@micropython.org>
The `cert` argument passed to the verify callback is actually a memoryview.
And the `depth` argument seems to start at 1 for the tested URL.
Signed-off-by: Damien George <damien@micropython.org>
The three-argument form of `.throw()` is deprecated since CPython 3.12. So
split out into separate tests (with .exp files) the parts of the generator
tests that test more than one argument.
Signed-off-by: Damien George <damien@micropython.org>
And use `asyncio.new_event_loop()` where possible. This change is needed
because CPython 3.12 deprecated the `get_event_loop()` function.
Signed-off-by: Damien George <damien@micropython.org>
Also define `mp_type_bytearray`. These all help to write native modules.
Signed-off-by: Brian Pugh <bnp117@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
Instead of raising KeyError. These semantics match JavaScript behaviour
and make it much more seamless to pass Python dicts through to JavaScript
as though they were JavaScript {} objects.
Signed-off-by: Damien George <damien@micropython.org>
This adds a new undefined singleton to Python, that corresponds directly to
JavaScript `undefined`. It's accessible via `js.undefined`.
Signed-off-by: Damien George <damien@micropython.org>
This reverts part of commit fa23e4b093, to
make it so that Python `None` converts to JavaScript `null` (and JavaScript
`null` already converts to Python `None`). That's consistent with how the
`json` module converts these values back and forth.
Signed-off-by: Damien George <damien@micropython.org>
And change Py None conversion so it converts to JS undefined.
The semantics for conversion of these objects are then:
- Python None -> JavaScript undefined
- JavaScript undefined -> Python None
- JavaScript null -> Python None
This follows Pyodide:
https://pyodide.org/en/stable/usage/type-conversions.html
Signed-off-by: Damien George <damien@micropython.org>
This commit defines a new `JsException` exception type which is used on the
Python side to wrap JavaScript errors. That's then used when a JavaScript
Promise is rejected, and the reason is then converted to a `JsException`
for the Python side to handle.
This new exception is exposed as `jsffi.JsException`.
Signed-off-by: Damien George <damien@micropython.org>
JavaScript semantics are such that the caller of an async function does not
need to await that function for it to run to completion. This commit makes
that behaviour also apply to top-level async Python code run via
`runPythonAsync()`.
Signed-off-by: Damien George <damien@micropython.org>
The `reason` in a rejected promise should be an instance of `Error`. That
leads to better error messages on the JavaScript side.
Signed-off-by: Damien George <damien@micropython.org>
This commit adds a significant portion of the existing MicroPython asyncio
module to the webassembly port, using parts of the existing asyncio code
and some custom JavaScript parts.
The key difference to the standard asyncio is that this version uses the
JavaScript runtime to do the actual scheduling and waiting on events, eg
Promise fulfillment, timeouts, fetching URLs.
This implementation does not include asyncio.run(). Instead one just uses
asyncio.create_task(..) to start tasks and then returns to the JavaScript.
Then JavaScript will run the tasks.
The implementation here tries to reuse as much existing asyncio code as
possible, and gets all the semantics correct for things like cancellation
and asyncio.wait_for. An alternative approach would reimplement Task,
Event, etc using JavaScript Promise's. That approach is very difficult to
get right when trying to implement cancellation (because it's not possible
to cancel a JavaScript Promise).
Signed-off-by: Damien George <damien@micropython.org>
Two cases, one assigning to a slice.
Closes https://github.com/micropython/micropython/issues/13283
Second is extending a slice from itself, similar logic.
In both cases the problem occurs when m_renew causes realloc to move the
buffer, leaving a dangling pointer behind.
There are more complex and hard to fix cases when either argument is a
memoryview into the buffer, currently resizing to a new address breaks
memoryviews into that object.
Reproducing this bug and confirming the fix was done by running the unix
port under valgrind with GC-aware extensions.
Note in default configurations with GIL this bug exists but has no impact
(the free buffer won't be reused while the function is still executing, and
is no longer referenced after it returns).
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This optimises the case where a Python function is, for example, stored to
a JavaScript attribute and then later retrieved from Python. The Python
function no longer needs to be a proxy with double proxying needed for the
call from Python -> JavaScript -> Python.
Signed-off-by: Damien George <damien@micropython.org>
