5024 Commits

Author	SHA1	Message	Date
Damien George	f1b00d67e9	cc3200/mpconfigport: Use MICROPY_CONFIG_ROM_LEVEL_CORE_FEATURES. ... This commit makes it explicit that the port uses the MICROPY_CONFIG_ROM_LEVEL_CORE_FEATURES feature level, and removes config options that are the default at this level. This change is a no-op for the firmware. Signed-off-by: Damien George <damien@micropython.org>	2025-09-26 13:54:32 +10:00
Damien George	03b4c60fc1	nrf/modules/machine/spi: Print SPI baudrate, polarity and phase. ... On most ports, printing an instance of machine.SPI gives something like: >>> machine.SPI(1) SPI(1, baudrate=328125, polarity=0, phase=0, bits=8) This commit makes the nrf port do the same. The reason for this change is: - make nrf consistent with other ports - allow the `tests/extmod/machine_spi_rate.py` to run on the nrf port (this tests parses the output of str(spi) to get the actual baudrate) Signed-off-by: Damien George <damien@micropython.org>	2025-09-26 13:44:43 +10:00
Damien George	b44c4de4fd	tests/ports/unix: Add coverage test for readinto1 stream method. ... And expand the test for `readinto()` to test the difference between trying to read the requested amount by doing multiple underlying IO calls, and only doing one call. Signed-off-by: Damien George <damien@micropython.org>	2025-09-26 00:24:08 +10:00
Chris Webb	81985d20c9	shared/runtime/mpirq: Check separate hard IRQ stack correctly. ... On the zephyr port, hard IRQ handlers run with a separate stack on a different thread, so each call to mp_irq_dispatch() and mp_irq_handler() has to be wrapped with adjustments to the stack-limit checker. Move these adjustments into the shared mp_irq_dispatch(), introducing MICROPY_STACK_SIZE_HARD_IRQ which a port can define to non-zero if it uses a separate stack for hard IRQ handlers. We only need wrap the hard dispatch case. This should reduce binary size on zephyr without affecting other ports. Signed-off-by: Chris Webb <chris@arachsys.com>	2025-09-25 23:59:24 +10:00
Chris Webb	64fd2f5f36	esp32/machine_timer: Warn that hard timers are not implemented. ... machine.Timer() has inconsistent behaviour between ports: some run callbacks in hard IRQ context whereas others schedule them like soft IRQs. Most ports now support a hard= argument to the machine.Timer constructor or initialiser to explicitly choose between these behaviours. However, esp32 does not support hardware interrupts because they are not delivered to the main thread, so the interrupt handler would need to acquire the GIL. Raise a ValueError if hard=True is requested for esp32 machine.Timer. Signed-off-by: Chris Webb <chris@arachsys.com>	2025-09-25 23:59:24 +10:00
Chris Webb	e7aa2a523c	esp8266/modmachine: Support hard IRQ timer callbacks. ... machine.Timer() has inconsistent behaviour between ports: some run callbacks in hard IRQ context whereas others schedule them like soft IRQs. As on the rp2 port, add support to the esp8266 port for a hard= argument to explicitly choose between these, setting the default to False to match the existing behaviour. Open-code this as we don't link against mpirq.c so can't use mp_irq_dispatch(). Signed-off-by: Chris Webb <chris@arachsys.com>	2025-09-25 23:59:24 +10:00
Chris Webb	c617ed159a	zephyr/machine_timer: Support hard IRQ timer callbacks. ... machine.Timer() has inconsistent behaviour between ports: some run callbacks in hard IRQ context whereas others schedule them like soft IRQs. As on the rp2 port, add support to the zephyr port for a hard= argument to explicitly choose between these, setting the default to False to match the existing behaviour. Adjust the stack-limit check to use the ISR stack while the callback is dispatched so that hard IRQ callbacks work, as with machine_pin.c and machine_i2c_target.c IRQ callbacks. Signed-off-by: Chris Webb <chris@arachsys.com>	2025-09-25 23:59:24 +10:00
Chris Webb	49f2a1f0ed	stm32/timer: Support soft IRQ timer callbacks. ... machine.Timer() has inconsistent behaviour between ports: some run callbacks in hard IRQ context whereas others schedule them like soft IRQs. As on the rp2 port, add support to the stm32 port for a hard= argument to explicitly choose between these, setting the default to True to match the existing behaviour. Signed-off-by: Chris Webb <chris@arachsys.com>	2025-09-25 23:59:24 +10:00
Chris Webb	a69b08b756	renesas-ra/timer: Support soft IRQ timer callbacks. ... machine.Timer() has inconsistent behaviour between ports: some run callbacks in hard IRQ context whereas others schedule them like soft IRQs. As on the rp2 port, add support to the renesas-ra port for a hard= argument to explicitly choose between these, setting the default to True to match the existing behaviour. Signed-off-by: Chris Webb <chris@arachsys.com>	2025-09-25 23:59:24 +10:00
Chris Webb	b7bf24e481	rp2/machine_timer: Use mp_irq_dispatch() to reduce duplication. ... Now that mp_irq_dispatch() is available to dispatch arbitary hard/soft callbacks, take advantage of this for rp2 machine.Timer. This should slightly reduce binary size. Signed-off-by: Chris Webb <chris@arachsys.com>	2025-09-25 23:59:24 +10:00
Damien George	6c9940b1f6	stm32/adc: Get ADC working on STM32N6 MCUs. ... Changes made here for N6 are: - set RIF security attributes for ADC12 - clock ADC12 at 50MHz (maximum) so it runs at spec (max 5Msamp/sec) - increase sampling time for standard channels to 46.5 cycles - calibrate ADC in `adc.c` - correctly clear ADC_CFGR1_RES bits in `machine_adc.c` - set preselection register in `machine_adc.c` Signed-off-by: Damien George <damien@micropython.org>	2025-09-25 12:55:51 +10:00
robert-hh	d0d9d978eb	esp32/machine_uart: Call uart_wait_tx_done() only with driver installed. ... Otherwise an error message will pop up at the first instatiation of the UART object. Addresses #18122 / #18123. Signed-off-by: robert-hh <robert@hammelrath.com>	2025-09-24 20:03:49 +02:00
Yuuki NAGAO	5312614974	stm32/rtc: Fix RTC.wakeup issue for STM32G0. ... To clear wakeup interrupt flag, set CWUTF on RTC_SCR instead of RTC_MISR. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-23 14:49:19 +10:00
Yuuki NAGAO	9a13688c13	stm32/timer: Enable RTCAPB_CLK for STM32G0. ... To get worked pyb.RTC and machine.RTC on STM32G0. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-23 14:49:16 +10:00
Yuuki NAGAO	8632351983	stm32/timer: Fix Timer(4) issue for STM32G0. ... The definition of TIM_ENTRY of TIM4 is incorrect. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-23 14:49:10 +10:00
Yuuki NAGAO	ddf1a383ca	stm32/machine_adc: Fix machine.ADC so it works on STM32G0. ... Fixes are: - Enable VREG before initializing ADC. - The channel value of internal sensor should convert with __LL_ADC_CHANNEL_TO_DECIMAL_NB(). Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-23 14:48:50 +10:00
Yuuki NAGAO	7ba82219f3	stm32/adc: Fix pyb.ADC issue for STM32G0. ... Fixes are: - The internal sensors of STM32G0 are connected channel 12, 13, 14. - Update adc_refcor before reading vbat and tempsensor because reference values are at VDDA=3.0V. - The method of initialize of sampling time is different with other MCUs: STM32G0 should initialize SamplingTimeCommon1/2 first. When reading value from ADC, ADC_ChannelConfTypeDef.SamplingTime should be specified SamplingTimeCommon1 or SamplingTimeCommon2. In this patch, SamplingTimeCommon2 is used for internal sensors and SamplingTimeCommon1 is used for external ADC channels. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-23 14:48:16 +10:00
Yuuki NAGAO	65b2dc255b	stm32/powerctrlboot: Refactor clock settings for STM32G0. ... Clock parameter definitions should be in `mpconfigboard.h` and use them at clock initialization. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-23 14:47:46 +10:00
Yuuki NAGAO	592affce3f	stm32/make-stmconst.py: Fix missing peripheral consts in stm module. ... Lines like the following were not handled by `make-stmconst.py`: #define APBPERIPH_BASE (PERIPH_BASE) This leads to missing definitions on stm module. For example, `stm.RTC` is not defined if `RTC_BASE` is defined as #define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) because `APBPERIPH_BASE` is not handled as a valid id. This patch modifies the RegExp so it can handle the above. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-23 14:34:58 +10:00
Mike Wang	8c389db6ea	unix/main: Ensure atexit function is called with -m <module>. ... Previously, when running `micropython -m <module>` and the module called sys.exit(), the registered atexit function was not executed. This was due to sys.exit() raising a SystemExit exception, which bypassed the atexit handler. This change fixes the issue so that the atexit function is properly invoked when exiting via sys.exit(). Additionally, following the pattern in execute_from_lexer(), mp_hal_set_interrupt_char() and mp_handle_pending() handling were added to ensure that the atexit function is also executed when the user exits via Ctrl-C. Signed-off-by: Mike Wang <mikewang000000@gmail.com>	2025-09-23 14:13:37 +10:00
Mike Wang	cf097932a2	unix/modsocket: Set file descriptor to -1 on close. ... After s.close(), s.fileno() now returns -1, matching CPython behavior. Some code relies on this compatibility, as it allows checking whether a socket is closed by testing its fileno() value. This change ensures better interoperability with existing Python code and libraries. Signed-off-by: Mike Wang <mikewang000000@gmail.com>	2025-09-23 14:06:37 +10:00
Alessandro Gatti	8757eb715e	rp2/mpconfigport: Enable Zba opcodes in RISC-V mode. ... This commit enables generation of Zba opcodes by the native emitter for the Pico2, as its RISC-V implementation supports both of those extensions (see section 3.8 of the RP2350 datasheet). Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-09-19 15:52:20 +02:00
Alessandro Gatti	1fea1e20db	qemu: Enable Zba opcodes for the VIRT_RV32 board. ... This commit enables the usage of the Zba address generation opcodes in the QEMU port when targeting the "VIRT_RV32" board, which emulates a generic RV32 target. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-09-19 15:52:20 +02:00
Alessandro Gatti	44986b1f04	qemu/riscv64: Add new QEMU RV64 port. ... This adds a QEMU-based bare metal RISC-V 64 bits port. For the time being only QEMU's "virt" 64 bits board is supported, using the lp64 ABI and the RV64IMC architecture. The port's README is also updated to keep track of these changes. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-09-19 11:11:31 +10:00
Damien George	ec1bfcfbb7	stm32/main: Use defined constants to enable N6 clocks during low power. ... Use constants from the HAL instead of literal numbers to select which peripheral clocks are enabled during low power mode. Signed-off-by: Damien George <damien@micropython.org>	2025-09-18 23:32:44 +10:00
Yuuki NAGAO	8d04f5da7d	stm32/boards: Set RCC_HSE_BYPASS for relevant NUCLEO boards. ... For NUCLEO boards that does not have HSE crystal, HSEState should set RCC_HSE_BYPASS to use HSE clock from ST-LINK 8MHz. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-18 22:50:25 +10:00
Yuuki NAGAO	c4d99f34ae	stm32/uart: Fix LPUART init failure with low baudrate. ... UART prescaler value should set up correctly to initialize LPUART with low baudrate for STM32G0/G4/H5. This can be implemented similarly to STM32H7/N6/WB. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-18 22:36:16 +10:00
iabdalkader	7cbe083b2c	stm32/uart: Enable UART FIFO for STM32N6. ... Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2025-09-18 22:28:35 +10:00
Yuuki NAGAO	a6efc67064	stm32/i2c: Add hardware I2C implementation for STM32G4. ... For STM32G4, hardware I2C can implement same as STM32L4 for machine.I2C. This commit makes to be able to use of hardware I2C in machine.I2C. Tested on NUCLEO-G474RE. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-18 17:06:22 +10:00
Yuuki NAGAO	03e3a06de6	stm32/boards/NUCLEO_G474RE: Change flash latency for NUCLEO-G474RE. ... For NUCLEO-G474RE, FLASH_LATENCY_4 can be specified instead of FLASH_LATENCY_8 because it runs at 170MHz. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-18 17:02:39 +10:00
Yuuki NAGAO	06a90e0b4b	stm32/boards/NUCLEO_F401RE: Change flash latency for NUCLEO-F401RE. ... For NUCLEO-F401RE, FLASH_LATENCY_2 can be specified for flash latency because it runs at 84MHz. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>	2025-09-18 16:55:31 +10:00
Jeff Epler	a69425b533	unix/Makefile: Add additional testing targets. ... These are convenience targets for running specific tests as a developer. They are more useful that invoking run-tests directly as they take account of the VARIANT= specified on the make command-line. For instance, you can run all tests matching the regular expression "int" with `make VARIANT=... test//int`. The new targets are all documented in README.md. Signed-off-by: Jeff Epler <jepler@gmail.com>	2025-09-16 12:31:14 +10:00
Jeff Epler	e9da4c9c98	unix/modsocket: Use type-checking mp_obj_get_int. ... MP_OBJ_SMALL_INT_VALUE would give erroneous results, such as assertion failures in the coverage build and other oddities like: >>> s = socket.socket() >>> s.recv(3.14) MemoryError: memory allocation failed, allocating 4235896656 bytes Signed-off-by: Jeff Epler <jepler@gmail.com>	2025-09-16 12:04:19 +10:00
Jeff Epler	36ab1c2640	ports: Remove unneeded future imports. ... Signed-off-by: Jeff Epler <jepler@unpythonic.net>	2025-09-15 14:54:09 +10:00
Jeff Epler	f0c6f16b9e	all: Remove Python 2.7 support. ... Python 2.7 has been EOL since January 2020. Ubuntu oldoldlts (Focal Fossa, 20.04) has Python 3.8. Debian oldoldstable (Buster, from 2019) has Python 3.7. RHEL 8 (from 2019) has Python 3.6. It's easier than ever to install a modern Python using uv. Given this, it seems like a fine idea to drop Python 2.7 support. Even though the build is not tested on Python as old as 3.3, I left comments stating that "3.3+" is the baseline Python version. However, it might make sense to bump this to e.g., 3.10, the oldest Python 3 version used during CI. Or, using uv or another method actually test on the oldest Python interpreter that is desirable to support (uv goes back to Python 3.7 easily; in October 2025, the oldest supported Python interpreter version will be 3.10) Signed-off-by: Jeff Epler <jepler@gmail.com>	2025-09-15 14:53:32 +10:00
Damien George	d441788975	esp8266/main: Use new cstack API and add a stack margin of 64 bytes. ... The margin of 64 bytes is needed to get `micropython/extreme_exc.py` to pass when run via-mpy. Signed-off-by: Damien George <damien@micropython.org>	2025-09-11 12:55:36 +10:00
robert-hh	66fb82e44e	py/stream: Add a stream.readinto1() method for machine.UART. ... Avoiding the double timeout when used with the UART class. `stream.readinto1()` returns after the first timeout. Fixes issue #17611. Signed-off-by: robert-hh <robert@hammelrath.com>	2025-09-11 12:42:24 +10:00
robert-hh	c50f9cbb42	esp32/machine_uart: Handle properly the timeout_char argument. ... Before, it was ignored. Tested with ESP32, ESP32S3, ESP32C6. Signed-off-by: robert-hh <robert@hammelrath.com>	2025-09-11 12:42:18 +10:00
robert-hh	55ecaf14a0	extmod/machine_uart: Return from read()/write() at the first timeout. ... Do not try to read/write again after timeout happened once. Fixes issue #17611. Signed-off-by: robert-hh <robert@hammelrath.com>	2025-09-11 12:41:55 +10:00
Anson Mansfield	1d90577b7e	py/gc: Clean up usage of GC_ALLOC_FLAG_HAS_FINALISER flag. ... The calls signature for gc_malloc was changed in 5ed578e5b4, without cleaning up existing code on the rationale that the previous bool is automatically converted to an int with the same meaning. This commit goes back and cleans up existing invocations to make their behavior more readable in a modern context. Signed-off-by: Anson Mansfield <amansfield@mantaro.com>	2025-09-10 17:24:56 +10:00
Angus Gratton	371db85c8e	esp32/machine_uart: Convert machine.UART objects to static instances. ... Makes machine.UART objects static instances (similar to other ports), adds machine_uart_deinit_all() function for cleanup on soft reset. - Fixes the case where the OS-level uart_event_task is leaked (along with 2KB of heap) when a UART object is garbage collected (including after a soft reset). - Fixes hard fault if a previous UART irq() fires after the UART object is garbage collected (including after a soft reset), but before any new UART object is instantiated for the same UART number. - Constructing multiple UART objects for the same UART now returns the same instance multiple times, not different instances. - Was also able to streamline deinit/init to only install the driver once, rather than install-with-defaults/uninstall/reinstall. Alternative would be to add a finaliser, but this is more consistent with how most other UART objects are implemented. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2025-09-10 16:18:03 +10:00
Angus Gratton	8d5a8892d2	esp32: Add IDF Component Lockfiles to git repo. ... This is recommended by Espressif, and it's the only way to ensure everyone builds the same set of component versions. The awkward part is that updating the ESP-IDF version will churn a line in each of these files (and possibly other changes). Adds a build-time check for lock file changes, which is either a warning or a hard error depending on the value of MICROPY_MAINTAINER_BUILD flag (introduced in previous commit). This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2025-09-09 11:31:42 +10:00
Angus Gratton	7dce35c7be	esp32: Update esp_tinyusb component to v1.7.6. ... Reported to fix issues reported with serial corruption when interacting with MicroPython from macOS hosts. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2025-09-09 11:31:42 +10:00
Alessandro Gatti	d1607598fa	esp32/usb: Fix building with USB CDC disabled. ... This commit fixes the build issues in the ESP32 port that arise when explicitly disabling USB CDC support. The USB support code gated the USB serial number retrieval behind the USB CDC support definition, even though all USB devices must be able to be queried for their serial number. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-09-09 10:29:38 +10:00
Alessandro Gatti	ef21e98520	samd/mphalport: Fix building with USB CDC disabled. ... This commit fixes the build issues in the SAMD port that arise when explicitly disabling USB CDC support. The console code assumed CDC support is always enabled even if it was disabled in mpconfigport.h. These changes make accessing CDC conditional to that support configuration being enabled. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-09-09 10:29:38 +10:00
Alessandro Gatti	3e5ecd0c33	mimxrt/mphalport: Fix building with USB CDC disabled. ... This commit fixes the build issues in the MIMXRT port that arise when explicitly disabling USB CDC support. The console code assumed CDC support is always enabled even if it was disabled in mpconfigport.h. These changes make accessing CDC conditional to that support configuration being enabled. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-09-09 10:29:38 +10:00
Alessandro Gatti	1f7952e749	rp2/mphalport: Fix building with USB CDC disabled. ... This commit fixes the linking issues in the RP2 port that arise when explicitly disabling USB CDC support. The console input ringbuffer needs to be made available if dupterm support is enabled, and the console character input function would always attempt to read from the input ringbuffer even if CDC support is disabled and the console isn't bound to any UART. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-09-09 10:29:38 +10:00
Damien George	c7c0ad222e	alif/tinyusb_port: Fix setting of USB device addr for fast hosts. ... A fast host (eg Mac M4) may request the status for the SET_ADDRESS before TinyUSB gets to process it. This is because TinyUSB does not handle events inside the USB ISR, rather it waits for the top-level thread to process them. Fix that by setting the USB device address as soon as TUSB_REQ_SET_ADDRESS comes in. This patch follows the corresponding upstream fix: fc40ea7fc6 Signed-off-by: Damien George <damien@micropython.org>	2025-09-08 12:30:53 +10:00
Damien George	bfda577a3e	zephyr/CMakeLists.txt: Enable sys.implementation._build. ... This is, eg, `ZEPHYR_NUCLEO_WB55RG`. Signed-off-by: Damien George <damien@micropython.org>	2025-09-08 11:24:32 +10:00
iabdalkader	9939565d50	stm32/boards/ARDUINO_OPTA: Reset ETH PHY on board init. ... As required by the datasheet. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2025-09-02 14:05:26 +10:00