This reduces memory use by reusing objects, and improves identity/equality
relationships of JavaScript objects on the Python side.
In 77bd8fe5b8 PyProxy's were reused when the
same Python object was proxied across to JavaScript. This commit does the
same thing but for JsProxy's going from JS to Python. If an existing
JsProxy reference exists for the JS object about to be proxied across, then
it's reused.
This helps reduce the number of alive objects (memory use), and, more
importantly, improves equality relationships of JavaScript objects on the
Python side. Eg we now get, on the Python side:
import js
print(js.Object == js.Object)
that prints True. Previously it was False.
Note that this change does not make identity work with `is`, for example
`js.Object is js.Object` is actually False. With more work that could be
made True but for now we leave that as-is.
The behaviour with this commit matches Pyodide semantics.
Signed-off-by: Damien George <damien@micropython.org>
This commit adjusts the configuration of the standard zephyr build to use
MICROPY_CONFIG_ROM_LEVEL_BASIC_FEATURES. That's a lot cleaner than
explicitly enabling/disabling options, and allows boards to more easily
fine-tune the settings, eg select a different feature level.
Features that are now enabled are:
- async/await keyword support
- `filter`, `property` and `reversed` builtins
- `range` attributes
- `str.count()` method
- `array` module with `array.array` object
- `collections` module with `collections.namedtuple` object
- `struct` module with everything
- `id = const()` and constant folding in the compiler
Bulding qemu_cortex_m3, the code size was originally:
Memory region Used Size Region Size %age Used
FLASH: 193864 B 256 KB 73.95%
RAM: 61992 B 64 KB 94.59%
and with this commit it is now:
Memory region Used Size Region Size %age Used
FLASH: 200698 B 256 KB 76.56%
RAM: 61992 B 64 KB 94.59%
That's a mild increase of +6834 bytes flash usage for a good selection of
new features.
Signed-off-by: Damien George <damien@micropython.org>
This commit adjusts the configuration of the minimal zephyr build to use
MICROPY_CONFIG_ROM_LEVEL_MINIMUM. That's a lot cleaner than explicitly
enabling/disabling options.
Prior to this change the minimal build for qemu_cortex_m3 had size:
Memory region Used Size Region Size %age Used
FLASH: 114436 B 256 KB 43.65%
RAM: 26320 B 64 KB 40.16%
and had the following test results (running using the CI settings, ie
`-d basics float --exclude inf_nan_arith`):
352 tests performed (7092 individual testcases)
352 tests passed
254 tests skipped: ...
With the changes here the qemu_cortex_m3 size is now:
Memory region Used Size Region Size %age Used
FLASH: 99428 B 256 KB 37.93%
RAM: 26312 B 64 KB 40.15%
That's a good decrease of about 15k firmware size. And the test suite
still passes with:
342 tests performed (6776 individual testcases)
341 tests passed
265 tests skipped: ...
Signed-off-by: Damien George <damien@micropython.org>
ESP32-C2 ROM prints at 74880bps (same as ESP8266), so need a newline
before first MicroPython output to avoid it being appended on end of
a line of noise.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This is necessary for ESP32-C2 Wi-Fi & BT to work reliably (and for TLS to
work at all). On IDF 5.4.2 the free static RAM goes from 60KB to 100KB, and
there will also be a reduction in lwIP & Wi-Fi memory use at runtime.
The performance trade-off seems low for most use cases, although it will
probably be significant for certain combinations of load (i.e. heavy
TCP/IP, heavy BT throughput, and some peripheral driver functions).
Added as a set of config flags because this is potentially useful on other
SoCs where the goal is to maximise RAM available for MicroPython.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Includes:
esp32/esp32c2: Adapt to target chip ESP32C2.
esp32/esp32c2: Fix heap size is too small to enable Bluetooth.
Signed-off-by: TianShuangKe <qinyun575@gmail.com>
Signed-off-by: Angus Gratton <angus@redyak.com.au>
XOSC_MHZ and XOSC_KHZ may not be defined if we use a custom XIN clock
by defining PLL_SYS_REFDIV etc. calculated by vcocalc.py.
Signed-off-by: Christian Lang <lang.chr86@gmail.com>
All these arguments are of type `mp_{u,}int_t`, but the actual value is
always a small integer. Cast it so that it can format with the `%d/%u`
formatter.
Before, the compiler plugin produced an error in the PYBD_SF6 build, which
is a nanboxing build with 64-bit ints.
Signed-off-by: Jeff Epler <jepler@gmail.com>
During the coverage test, all the values encountered are within the range
of `%d`.
These locations were found using an experimental gcc plugin for `mp_printf`
error checking.
Signed-off-by: Jeff Epler <jepler@gmail.com>
This fixes the following diagnostic produced by the plugin:
error: argument 3: Format ‘%x’ requires a ‘int’ or
‘unsigned int’ (32 bits), not ‘long unsigned int’ [size 64]
[-Werror=format=]
Signed-off-by: Jeff Epler <jepler@gmail.com>
Fixes a bug in the binding of self/this to JavaScript methods.
The new semantics match Pyodide's behaviour, at least for the included
tests.
Signed-off-by: Damien George <damien@micropython.org>
It seems GCC 14 got stricter with warn/errs like -Wsign-compare and types a
"bare number" as a long int that can't be compared to a (unsigned) size_t.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Without this there's a build error on macOS (at least). This was likely
due to a combination of 9b7d85227e and
df05caea6c.
Signed-off-by: Damien George <damien@micropython.org>
There is currently no build using REPR_C in the unix CI tests. As
discussed in PR #16953, this is something that combines well with the
longlong build.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
This is a patch release of the IDF. Comparing with 5.4.1, firmware size is
up by about 1.5k on ESP32 and 9k on ESP32-S3. But IRAM usage (of the IDF)
is down by about 500 byte on ESP32 and DRAM usage is down by about 20k on
ESP32 and 10k on ESP32-S3.
Testing on ESP32, ESP32-S2, ESP32-S3 and ESP32-C3 shows no regressions,
except in BLE MTU ordering (the MTU exchange event occuring before the
connect event).
Signed-off-by: Damien George <damien@micropython.org>
Currently, `UART.sendbreak()` on esp32 will reconfigure the UART to a
slower baudrate and send out a null byte, to synthesise a break condition.
That's not great because it changes the baudrate of the RX path as well,
which could miss incoming bytes while sending the break.
This commit changes the sendbreak implementation to just reconfigure the TX
pin as GPIO in output mode, and hold the pin low for the required duration.
Signed-off-by: Damien George <damien@micropython.org>
The unix port can now be built with the GIL enabled, by passing
MICROPY_PY_THREAD_GIL=1 on the make command line.
Signed-off-by: Damien George <damien@micropython.org>
When detecting the target platform, also check if it has threading and
whether the GIL is enabled or not (using the new attribute
`sys.implementation._thread`). If threading is available, add the thread
tests to the set of tests to run (unless the set of tests is explicitly
given).
With this change, the unix port no longer needs to explicitly run the set
of thread tests, so that line has been removed from the Makefile.
This change will make sure thread tests are run with other testing
combinations. In particular, thread tests are now run:
- on the unix port with the native emitter
- on macOS builds
- on unix qemu, the architectures MIPS, ARM and RISCV-64
Signed-off-by: Damien George <damien@micropython.org>
This commit fixes building the "btree" example natmod on RV32 when
Picolibc is being used and uses thread-local storage for storing the
errno variable.
The fix is surprisingly simple: Picolibc allows overriding the function
that will provide a pointer to the "errno" variable, and the btree
natmod integration code already has all of this machinery set up as part
of its library integration. Redirecting Picolibc to the already
existing pointer provider function via a compile-time definition is
enough to let the module compile and pass QEMU tests.
This workaround will work on any Picolibc versions (Arm, RV32, Xtensa,
etc.) even if TLS support was not enabled to begin with, and will
effectively do nothing if the toolchain used will rely on Newlib to
provide standard C library functions.
Given that the btree module now builds and passes the relevant natmod
tests, said module is now part of the QEMU port's natmod testing
procedure, and CI now will build the btree module for RV32 as part to
its checks.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This commit improves get handling by guarding against implicit unknown
symbols accessed directly by specific JS native APIs.
Fixes issue #17657.
Signed-off-by: Andrea Giammarchi <andrea.giammarchi@gmail.com>
When mDNS is active on a netif it registers a lot of timeouts, namely:
mdns_probe_and_announce
mdns_handle_tc_question
mdns_multicast_probe_timeout_reset_ipv4
mdns_multicast_timeout_25ttl_reset_ipv4
mdns_multicast_timeout_reset_ipv4
mdns_send_multicast_msg_delayed_ipv4
mdns_send_unicast_msg_delayed_ipv4
mdns_multicast_probe_timeout_reset_ipv6
mdns_multicast_timeout_25ttl_reset_ipv6
mdns_multicast_timeout_reset_ipv6
mdns_send_multicast_msg_delayed_ipv6
mdns_send_unicast_msg_delayed_ipv6
These may still be active after a netif is removed, and if they are called
they will find that the mDNS state pointer in the netif is NULL and they
will crash.
These functions could be explicitly removed using `sys_untimeout()`, but
`mdns_handle_tc_question()` is static so it's not possible to access it.
Instead use the new `sys_untimeout_all_with_arg()` helper to deregister all
timeout callbacks when a netif is removed.
Fixes issue #17621.
Signed-off-by: Damien George <damien@micropython.org>
Test 'l' and 'll' sized objects. When the platform's `mp_int_t` is not 64
bits, dummy values are printed instead so the test result can match across
all platforms.
Ensure hex test values have a letter so 'x' vs 'X' is tested.
And test 'p' and 'P' pointer printing.
Signed-off-by: Jeff Epler <jepler@gmail.com>
This drops use of non-existing path `/usr/include/i686-linux-gnu` as
default include paths shall suffice.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This is code makes sure that time functions work properly on a
reasonable date range, on all platforms, regardless of the epoch.
The suggested minimum range is 1970 to 2099.
In order to reduce code footprint, code to support far away dates
is only enabled specified by the port.
New types are defined to identify timestamps.
The implementation with the smallest code footprint is when
support timerange is limited to 1970-2099 and Epoch is 1970.
This makes it possible to use 32 bit unsigned integers for
all timestamps.
On ARM4F, adding support for dates up to year 3000 adds
460 bytes of code. Supporting dates back to 1600 adds
another 44 bytes of code.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
This commit provides helpers to retrieve integer values from
mp_obj_t when the content does not fit in a 32 bits integer,
without risking an implicit wrap due to an int overflow.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
An attempt to build the coverage module into the nanbox binary failed, but
pointed out that these sites needed explicit conversion from pointer to
object.
Signed-off-by: Jeff Epler <jepler@gmail.com>
Works in the usual USB DFU mode, and can program external SPI flash. It
will enable XSPI memory-mapped mode before jumping to the application
firmware in the external SPI flash.
Signed-off-by: Damien George <damien@micropython.org>
This commit adds preliminary support for ST's new STM32N6xx MCUs.
Supported features of this MCU so far are:
- basic clock tree initialisation, running at 800MHz
- fully working USB
- XSPI in memory-mapped mode
- machine.Pin
- machine.UART
- RTC and deepsleep support
- SD card
- filesystem
- ROMFS
- WiFi and BLE via cyw43-driver (SDIO backend)
Note that the N6 does not have internal flash, and has some tricky boot
sequence, so using a custom bootloader (mboot) is almost a necessity.
Signed-off-by: Damien George <damien@micropython.org>
Attempting to configure SPI3 and SPI4 for the STM32H5 would fail with a
linker error. This patch resolves that, ensuring that appropriate DMA
channels are assigned to those SPI resources.
Signed-off-by: Matt Trentini <matt.trentini@gmail.com>
On STM32H5/STM32H7, SPI flash cannot use as storage device with DMA. SPI
interruption may not be genearated even if DMA transfer has been done.
This is due to lower priority of SPI interruption than DMA.
This commit changes SPI interrupt priority more higher than DMA's priority.
Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>
