micropython/ports/esp32/boards/deploy_c6.md at 6d799378bad4474e77ddb2fa2187ecd6e290e0ba

mirror of https://github.com/micropython/micropython.git synced 2026-01-07 12:40:15 +01:00

Files

Andrew Leech 6d799378ba esp32: Add support for esp32c6.

This commit adds general support for ESP32-C6 SoCs.

Signed-off-by: Andrew Leech <andrew@alelec.net>

2024-10-09 23:29:38 +11:00

Program your board using the esptool.py program, found here.

If you are putting MicroPython on your board for the first time then you should first erase the entire flash using:

esptool.py --chip esp32c6 --port /dev/ttyUSB0 erase_flash

From then on program the firmware starting at address 0x0:

esptool.py --chip esp32c6 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x0 ESP32_GENERIC_C6-20240602-v1.24.0.bin