mirror of
https://github.com/micropython/micropython.git
synced 2026-01-04 19:20:22 +01:00
4f193132d2
Instead, depend directly on espressif/tinyusb component (which is otherwise transitively included via esp_tinyusb). Turns out esp_tinyusb builds a bunch of source files with symbols that conflict with our tinyusb symbols (i.e. descriptors_control.c). This only works because nothing in MicroPython causes the linker to include the esp_tinyusb.a library, however in order to override the dcd_int_handler (in following commit) this caused the linker to pull this library in and break the build. There's also a problematic header skew - TinyUSB component was building with the tusb_config.h file from esp_tinyusb component, but we have our own tusb_config.h file in shared/tinyusb. The changes in parent commit allow us to build the TinyUSB component with our tusb_config.h header. User-facing impacts are: - Can no longer override USB VID & PID via sdkconfig, have to set MICROPY_HW_USB_VID/PID instead (changes applied in this commit). - esp32 boards will have the same USB serial number as other ports (i.e. based on the hardware MAC address, not hard-coded). Side effects include: - CFG_TUD_DWC2_SLAVE_ENABLE is now set, DMA mode is disabled. Signed-off-by: Angus Gratton <angus@redyak.com.au>