mirror of
https://github.com/micropython/micropython.git
synced 2026-01-06 04:00:28 +01:00
9a070fee34
Signed-off-by: Alex Brudner <alex.brudner@sparkfun.com> Signed-off-by: Malcolm McKellips <malcolm.mckellips@sparkfun.com>
62 lines
1.6 KiB
C
62 lines
1.6 KiB
C
// Board and hardware specific configuration
|
|
#define MICROPY_HW_BOARD_NAME "SparkFun IoT RedBoard RP2350"
|
|
#define MICROPY_HW_FLASH_STORAGE_BYTES (PICO_FLASH_SIZE_BYTES - 1536 * 1024)
|
|
|
|
// Enable networking.
|
|
#define MICROPY_PY_NETWORK 1
|
|
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "IoTRedBoardRP2350"
|
|
|
|
#define CYW43_USE_SPI (1)
|
|
#define CYW43_LWIP (1)
|
|
#define CYW43_GPIO (1)
|
|
#define CYW43_SPI_PIO (1)
|
|
|
|
// USB VID/PID
|
|
#define MICROPY_HW_USB_VID (0x1B4F)
|
|
#define MICROPY_HW_USB_PID (0x0047)
|
|
|
|
// UART0
|
|
#define MICROPY_HW_UART0_TX (0)
|
|
#define MICROPY_HW_UART0_RX (1)
|
|
#define MICROPY_HW_UART0_CTS (30)
|
|
#define MICROPY_HW_UART0_RTS (31)
|
|
|
|
// UART1
|
|
#define MICROPY_HW_UART1_TX (40)
|
|
#define MICROPY_HW_UART1_RX (41)
|
|
#define MICROPY_HW_UART1_CTS (42)
|
|
#define MICROPY_HW_UART1_RTS (43)
|
|
|
|
// I2C0
|
|
#define MICROPY_HW_I2C0_SCL (5)
|
|
#define MICROPY_HW_I2C0_SDA (4)
|
|
|
|
// I2C1
|
|
#define MICROPY_HW_I2C1_SCL (31)
|
|
#define MICROPY_HW_I2C1_SDA (30)
|
|
|
|
// SPI0
|
|
#define MICROPY_HW_SPI0_SCK (22)
|
|
#define MICROPY_HW_SPI0_MOSI (23)
|
|
#define MICROPY_HW_SPI0_MISO (20)
|
|
|
|
// SD Card/SPI1
|
|
#define MICROPY_HW_SPI1_SCK (10)
|
|
#define MICROPY_HW_SPI1_MOSI (11)
|
|
#define MICROPY_HW_SPI1_MISO (8)
|
|
|
|
// PSRAM
|
|
#define MICROPY_HW_PSRAM_CS_PIN (47)
|
|
#define MICROPY_HW_ENABLE_PSRAM (1)
|
|
|
|
// #include "enable_cyw43.h"
|
|
|
|
// For debugging mbedtls - also set
|
|
// Debug level (0-4) 1=warning, 2=info, 3=debug, 4=verbose
|
|
// #define MODUSSL_MBEDTLS_DEBUG_LEVEL 1
|
|
|
|
#define MICROPY_HW_PIN_EXT_COUNT CYW43_WL_GPIO_COUNT
|
|
|
|
int mp_hal_is_pin_reserved(int n);
|
|
#define MICROPY_HW_PIN_RESERVED(i) mp_hal_is_pin_reserved(i)
|