micropython/ports/samd/mphalport.h

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2019-2021 Damien P. George
 * Copyright (c) 2022 Robert Hammelrath
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
#ifndef MICROPY_INCLUDED_SAMD_MPHALPORT_H
#define MICROPY_INCLUDED_SAMD_MPHALPORT_H

#include "py/ringbuf.h"
#include "py/mpconfig.h"

// ASF4
#include "hal_gpio.h"
#include "hpl_time_measure.h"
#include "sam.h"

#define MICROPY_BEGIN_ATOMIC_SECTION()     disable_irq()
#define MICROPY_END_ATOMIC_SECTION(state)  enable_irq(state)

#define MICROPY_PY_PENDSV_ENTER   uint32_t atomic_state = raise_irq_pri(IRQ_PRI_PENDSV)
#define MICROPY_PY_PENDSV_EXIT    restore_irq_pri(atomic_state)

#define MICROPY_HW_USB_CDC_TX_TIMEOUT (500)

extern int mp_interrupt_char;
extern ringbuf_t stdin_ringbuf;
extern volatile uint32_t systick_ms;
uint64_t mp_hal_ticks_us_64(void);

void mp_hal_set_interrupt_char(int c);

static inline void mp_hal_wake_main_task_from_isr(void) {
    // Defined for tinyusb support, nothing needs to be done here.
}

__attribute__((always_inline)) static inline void enable_irq(uint32_t state) {
    __set_PRIMASK(state);
}

__attribute__((always_inline)) static inline uint32_t disable_irq(void) {
    uint32_t state = __get_PRIMASK();
    __disable_irq();
    return state;
}

#define mp_hal_delay_us_fast  mp_hal_delay_us

static inline uint64_t mp_hal_ticks_ms_64(void) {
    return mp_hal_ticks_us_64() / 1000;
}

static inline mp_uint_t mp_hal_ticks_ms(void) {
    return (mp_uint_t)mp_hal_ticks_ms_64();
}

static inline mp_uint_t mp_hal_ticks_us(void) {
    return (mp_uint_t)mp_hal_ticks_us_64();
}

#if defined(MCU_SAMD21)

#define mp_hal_ticks_cpu mp_hal_ticks_us

#elif defined(MCU_SAMD51)
static inline void mp_hal_ticks_cpu_enable(void) {
    CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
    DWT->CYCCNT = 0;
    DWT->CTRL |= DWT_CTRL_CYCCNTENA_Msk;
}

static inline mp_uint_t mp_hal_ticks_cpu(void) {
    return (system_time_t)DWT->CYCCNT;
}
#endif

static inline uint64_t mp_hal_time_ns(void) {
    return mp_hal_ticks_us_64() * 1000;
}

// C-level pin HAL

#include "py/obj.h"

#define MP_HAL_PIN_FMT "%u"
#define mp_hal_pin_obj_t uint

#define mp_hal_quiet_timing_enter() MICROPY_BEGIN_ATOMIC_SECTION()
#define mp_hal_quiet_timing_exit(irq_state) MICROPY_END_ATOMIC_SECTION(irq_state)

extern uint32_t machine_pin_open_drain_mask[];

mp_hal_pin_obj_t mp_hal_get_pin_obj(mp_obj_t pin_in);
void mp_hal_set_pin_mux(mp_hal_pin_obj_t pin, uint8_t mux);
void mp_hal_clr_pin_mux(mp_hal_pin_obj_t pin);

static inline unsigned int mp_hal_pin_name(mp_hal_pin_obj_t pin) {
    return pin;
}

static inline void mp_hal_pin_input(mp_hal_pin_obj_t pin) {
    gpio_set_pin_direction(pin, GPIO_DIRECTION_IN);
    machine_pin_open_drain_mask[pin / 32] &= ~(1 << (pin % 32));
}

static inline void mp_hal_pin_output(mp_hal_pin_obj_t pin) {
    gpio_set_pin_direction(pin, GPIO_DIRECTION_OUT);
    machine_pin_open_drain_mask[pin / 32] &= ~(1 << (pin % 32));
}

static inline void mp_hal_pin_open_drain(mp_hal_pin_obj_t pin) {
    gpio_set_pin_direction(pin, GPIO_DIRECTION_IN);
    gpio_set_pin_pull_mode(pin, GPIO_PULL_UP);
    machine_pin_open_drain_mask[pin / 32] |= 1 << (pin % 32);
}

static inline unsigned int mp_hal_get_pin_direction(mp_hal_pin_obj_t pin) {
    return (PORT->Group[pin / 32].DIR.reg & (1 << (pin % 32))) ?
           GPIO_DIRECTION_OUT : GPIO_DIRECTION_IN;
}

static inline unsigned int mp_hal_get_pull_mode(mp_hal_pin_obj_t pin) {
    bool pull_en = (PORT->Group[pin / 32].PINCFG[pin % 32].reg & PORT_PINCFG_PULLEN) != 0;
    if (pull_en) {
        return gpio_get_pin_level(pin) ? GPIO_PULL_UP : GPIO_PULL_DOWN;
    } else {
        return GPIO_PULL_OFF;
    }
}

static inline int mp_hal_pin_read(mp_hal_pin_obj_t pin) {
    return gpio_get_pin_level(pin);
}

static inline void mp_hal_pin_write(mp_hal_pin_obj_t pin, int v) {
    gpio_set_pin_level(pin, v);
}

static inline void mp_hal_pin_low(mp_hal_pin_obj_t pin) {
    gpio_set_pin_level(pin, 0);
}

static inline void mp_hal_pin_high(mp_hal_pin_obj_t pin) {
    gpio_set_pin_level(pin, 1);
}

static inline void mp_hal_pin_od_low(mp_hal_pin_obj_t pin) {
    gpio_set_pin_direction(pin, GPIO_DIRECTION_OUT);
    gpio_set_pin_level(pin, 0);
}

static inline void mp_hal_pin_od_high(mp_hal_pin_obj_t pin) {
    gpio_set_pin_direction(pin, GPIO_DIRECTION_IN);
    gpio_set_pin_pull_mode(pin, GPIO_PULL_UP);
}

#endif // MICROPY_INCLUDED_SAMD_MPHALPORT_H