From b4f30ac38264e707eeaa4991c8b4f9332e160965 Mon Sep 17 00:00:00 2001 From: bvernoux Date: Sat, 27 Sep 2014 02:54:59 -0700 Subject: [PATCH] Created Board HydraBus V1.0 (markdown) --- Board-HydraBus-V1.0.md | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 Board-HydraBus-V1.0.md diff --git a/Board-HydraBus-V1.0.md b/Board-HydraBus-V1.0.md new file mode 100644 index 0000000..a777c85 --- /dev/null +++ b/Board-HydraBus-V1.0.md @@ -0,0 +1,14 @@ +Cortex M4F +* HydraBus 1.0 http://hydrabus.com/hydrabus-1-0-specifications +* Hardware doc, schematic/board are available on github: https://github.com/bvernoux/hydrabus/tree/master/hardware, Hardware licence CC BY NC (for commercial licence contact info@hydrabus.com). +* HydraBus/HydraNFC... products are Available in Seeed Studio Online Shop: http://www.seeedstudio.com/depot/HydraBus-m-132.html + +###Features### +* Standard Dangerous Prototypes PCB size DP6037_v1 (see http://dangerousprototypes.com/docs/Sick_of_Beige_basic_case_v1) (very small 60mm x 37mm size). +* Programming firmware through USB DFU (without any debugger) with USB1 FS. +* Debug/Programming through low cost SWD Debug connector (can be programmed/debugged using a low cost STM32F4 Discovery board for less than 20US$). +* Two MicroUSB port (1 OTG and 1 Device/Host) with ESD protection. +* MicroSD slot with 4bit SD and SDIO mode support in hardware (up to 48MHz about 24MB/s). +* Reset & User Button with User Led (can be disabled to reuse I/O for other stuff). +* Breakout of all 44 I/O (some are used by MicroSD and USB 1&2). +* Micro Python firmware ported to HydraBus see HydraBus Micro Python github: https://github.com/bvernoux/hydrabus/tree/master/firmware/micropython \ No newline at end of file