alif: Integrate cyw43 Bluetooth with NimBLE.

Signed-off-by: Damien George <damien@micropython.org>

ports/alif/alif.mk

@@ -142,6 +142,10 @@ ifeq ($(MICROPY_SSL_MBEDTLS),1)
 SRC_C += mbedtls/mbedtls_port.c
 endif
 
+ifeq ($(MICROPY_PY_BLUETOOTH),1)
+SRC_C += mpbthciport.c mpnimbleport.c
+endif
+
 ifeq ($(MICROPY_FLOAT_IMPL),float)
 LIBM_SRC_C += $(SRC_LIB_LIBM_C)
 LIBM_SRC_C += $(SRC_LIB_LIBM_SQRT_HW_C)

ports/alif/cyw43_configport.h

@@ -32,6 +32,7 @@
 #include "py/mphal.h"
 #include "py/runtime.h"
 #include "extmod/modnetwork.h"
+#include "extmod/mpbthci.h"
 #include "pendsv.h"
 
 #ifndef static_assert
@@ -39,6 +40,7 @@
 #endif
 
 #define CYW43_USE_SPI                   (1)
+#define CYW43_ENABLE_BLUETOOTH_OVER_UART (1)
 #define CYW43_LWIP                      (1)
 #define CYW43_USE_STATS                 (0)
 #define CYW43_PRINTF(...)               mp_printf(MP_PYTHON_PRINTER, __VA_ARGS__)
@@ -78,6 +80,7 @@
 #define CYW43_HAL_PIN_PULL_NONE         0
 
 #define CYW43_HAL_MAC_WLAN0             MP_HAL_MAC_WLAN0
+#define CYW43_HAL_MAC_BDADDR            MP_HAL_MAC_BDADDR
 
 #define cyw43_hal_ticks_us              mp_hal_ticks_us
 #define cyw43_hal_ticks_ms              mp_hal_ticks_ms
@@ -87,6 +90,10 @@
 #define cyw43_hal_pin_low               mp_hal_pin_low
 #define cyw43_hal_pin_high              mp_hal_pin_high
 
+#define cyw43_hal_uart_set_baudrate     mp_bluetooth_hci_uart_set_baudrate
+#define cyw43_hal_uart_write            mp_bluetooth_hci_uart_write
+#define cyw43_hal_uart_readchar         mp_bluetooth_hci_uart_readchar
+
 #define cyw43_hal_get_mac               mp_hal_get_mac
 #define cyw43_hal_get_mac_ascii         mp_hal_get_mac_ascii
 #define cyw43_hal_generate_laa_mac      mp_hal_generate_laa_mac
@@ -94,6 +101,11 @@
 #define CYW43_PIN_WL_REG_ON             pin_WL_REG_ON
 #define CYW43_PIN_WL_IRQ                pin_WL_IRQ
 
+#define CYW43_PIN_BT_REG_ON             pin_BT_REG_ON
+#define CYW43_PIN_BT_HOST_WAKE          pin_BT_HOST_WAKE
+#define CYW43_PIN_BT_DEV_WAKE           pin_BT_DEV_WAKE
+#define CYW43_PIN_BT_CTS                pin_BT_UART_CTS
+
 #define cyw43_schedule_internal_poll_dispatch(func) pendsv_schedule_dispatch(PENDSV_DISPATCH_CYW43, func)
 
 void cyw43_post_poll_hook(void);
@@ -120,4 +132,10 @@ static inline void cyw43_hal_pin_config_irq_falling(mp_hal_pin_obj_t pin, bool e
     mp_hal_pin_config_irq_falling(pin, enable);
 }
 
+#define cyw43_bluetooth_controller_init mp_bluetooth_hci_controller_init
+#define cyw43_bluetooth_controller_deinit mp_bluetooth_hci_controller_deinit
+#define cyw43_bluetooth_controller_sleep_maybe mp_bluetooth_hci_controller_sleep_maybe
+#define cyw43_bluetooth_controller_woken mp_bluetooth_hci_controller_woken
+#define cyw43_bluetooth_controller_wakeup mp_bluetooth_hci_controller_wakeup
+
 #endif // MICROPY_INCLUDED_ALIF_CYW43_CONFIGPORT_H

ports/alif/main.c

@@ -30,6 +30,7 @@
 #include "py/mperrno.h"
 #include "py/mphal.h"
 #include "py/stackctrl.h"
+#include "extmod/modbluetooth.h"
 #include "extmod/modnetwork.h"
 #include "shared/readline/readline.h"
 #include "shared/runtime/gchelper.h"
@@ -37,6 +38,7 @@
 #include "shared/runtime/softtimer.h"
 #include "shared/tinyusb/mp_usbd.h"
 #include "tusb.h"
+#include "mpbthciport.h"
 #include "mpuart.h"
 #include "ospi_flash.h"
 #include "pendsv.h"
@@ -103,6 +105,10 @@ int main(void) {
     mod_network_lwip_init();
     #endif
 
+    #if MICROPY_PY_BLUETOOTH
+    mp_bluetooth_hci_init();
+    #endif
+
     #if MICROPY_PY_NETWORK_CYW43
     {
         cyw43_init(&cyw43_state);
@@ -154,6 +160,9 @@ int main(void) {
 
     soft_reset_exit:
         mp_printf(MP_PYTHON_PRINTER, "MPY: soft reboot\n");
+        #if MICROPY_PY_BLUETOOTH
+        mp_bluetooth_deinit();
+        #endif
         soft_timer_deinit();
         gc_sweep_all();
         mp_deinit();

ports/alif/mpbthciport.c

@@ -0,0 +1,140 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2025 OpenMV LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/mphal.h"
+#include "py/runtime.h"
+#include "extmod/mpbthci.h"
+#include "shared/runtime/softtimer.h"
+#include "mpbthciport.h"
+
+#if MICROPY_PY_BLUETOOTH
+
+uint8_t mp_bluetooth_hci_cmd_buf[4 + 256];
+
+// Soft timer and scheduling node for scheduling a HCI poll.
+static soft_timer_entry_t mp_bluetooth_hci_soft_timer;
+static mp_sched_node_t mp_bluetooth_hci_sched_node;
+
+// This is called by soft_timer and executes at IRQ_PRI_PENDSV.
+static void mp_bluetooth_hci_soft_timer_callback(soft_timer_entry_t *self) {
+    mp_bluetooth_hci_poll_now();
+}
+
+void mp_bluetooth_hci_init(void) {
+    soft_timer_static_init(
+        &mp_bluetooth_hci_soft_timer,
+        SOFT_TIMER_MODE_ONE_SHOT,
+        0,
+        mp_bluetooth_hci_soft_timer_callback
+        );
+}
+
+static void mp_bluetooth_hci_start_polling(void) {
+    mp_bluetooth_hci_poll_now();
+}
+
+void mp_bluetooth_hci_poll_in_ms(uint32_t ms) {
+    soft_timer_reinsert(&mp_bluetooth_hci_soft_timer, ms);
+}
+
+// For synchronous mode, we run all BLE stack code inside a scheduled task.
+// This task is scheduled periodically via a timer, or immediately after UART RX IRQ.
+static void run_events_scheduled_task(mp_sched_node_t *node) {
+    (void)node;
+    // This will process all buffered HCI UART data, and run any callouts or events.
+    mp_bluetooth_hci_poll();
+}
+
+// Called periodically (systick) or directly (e.g. UART RX IRQ) in order to
+// request that processing happens ASAP in the scheduler.
+void mp_bluetooth_hci_poll_now(void) {
+    mp_sched_schedule_node(&mp_bluetooth_hci_sched_node, run_events_scheduled_task);
+}
+
+/******************************************************************************/
+// HCI over UART
+
+#include "mpuart.h"
+
+static uint32_t hci_uart_id;
+static bool hci_uart_first_char;
+static uint8_t hci_rx_ringbuf_array[768];
+static ringbuf_t hci_rx_ringbuf = {
+    .buf = hci_rx_ringbuf_array,
+    .size = sizeof(hci_rx_ringbuf_array),
+    .iget = 0,
+    .iput = 0,
+};
+
+int mp_bluetooth_hci_uart_init(uint32_t port, uint32_t baudrate) {
+    hci_uart_id = port;
+    hci_uart_first_char = true;
+
+    // Initialise the UART.
+    mp_uart_init(hci_uart_id, baudrate, pin_BT_UART_TX, pin_BT_UART_RX, &hci_rx_ringbuf);
+    mp_uart_set_flow(hci_uart_id, pin_BT_UART_RTS, pin_BT_UART_CTS);
+    mp_uart_set_irq_callback(hci_uart_id, mp_bluetooth_hci_poll_now);
+
+    // Start the HCI polling to process any initial events/packets.
+    mp_bluetooth_hci_start_polling();
+
+    return 0;
+}
+
+int mp_bluetooth_hci_uart_deinit(void) {
+    mp_uart_deinit(hci_uart_id);
+    return 0;
+}
+
+int mp_bluetooth_hci_uart_set_baudrate(uint32_t baudrate) {
+    mp_uart_set_baudrate(hci_uart_id, baudrate);
+    return 0;
+}
+
+int mp_bluetooth_hci_uart_write(const uint8_t *buf, size_t len) {
+    mp_bluetooth_hci_controller_wakeup();
+    mp_uart_tx_data(hci_uart_id, (void *)buf, len);
+    return 0;
+}
+
+// This function expects the controller to be in the wake state via a previous call
+// to mp_bluetooth_hci_controller_woken.
+int mp_bluetooth_hci_uart_readchar(void) {
+    if (mp_uart_rx_any(hci_uart_id)) {
+        int c = mp_uart_rx_char(hci_uart_id);
+        if (hci_uart_first_char) {
+            if (c == 0) {
+                return -1;
+            }
+            hci_uart_first_char = false;
+        }
+        return c;
+    } else {
+        return -1;
+    }
+}
+
+#endif // MICROPY_PY_BLUETOOTH

ports/alif/mpbthciport.h

@@ -0,0 +1,46 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#ifndef MICROPY_INCLUDED_ALIF_MPBTHCIPORT_H
+#define MICROPY_INCLUDED_ALIF_MPBTHCIPORT_H
+
+#include "py/mpconfig.h"
+
+// Initialise the HCI subsystem (should be called once, early on).
+void mp_bluetooth_hci_init(void);
+
+// Call this to poll the HCI now.
+void mp_bluetooth_hci_poll_now(void);
+
+// Call this to poll the HCI after a certain timeout.
+void mp_bluetooth_hci_poll_in_ms(uint32_t ms);
+
+// Must be provided by the stack bindings (e.g. mpnimbleport.c or mpbtstackport.c).
+// Request new data from the uart and pass to the stack, and run pending events/callouts.
+// This is a low-level function and should not be called directly, use
+// mp_bluetooth_hci_poll_now/mp_bluetooth_hci_poll_in_ms instead.
+void mp_bluetooth_hci_poll(void);
+
+#endif // MICROPY_INCLUDED_ALIF_MPBTHCIPORT_H

ports/alif/mpconfigport.h

@@ -170,6 +170,12 @@ extern const struct _mp_obj_type_t mp_network_cyw43_type;
     MICROPY_HW_NIC_CYW43 \
     MICROPY_BOARD_NETWORK_INTERFACES \
 
+// Bluetooth code only runs in the scheduler, no locking/mutex required.
+#define MICROPY_PY_BLUETOOTH_ENTER uint32_t atomic_state = 0;
+#define MICROPY_PY_BLUETOOTH_EXIT (void)atomic_state;
+#define MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE (1)
+#define MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS (1)
+
 #define MP_STATE_PORT MP_STATE_VM
 
 // Miscellaneous settings

ports/alif/mpnimbleport.c

@@ -0,0 +1,78 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Jim Mussared
+ * Copyright (c) 2020 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/runtime.h"
+#include "py/mperrno.h"
+#include "py/mphal.h"
+
+#if MICROPY_PY_BLUETOOTH && MICROPY_BLUETOOTH_NIMBLE
+
+#define DEBUG_printf(...) // printf("mpnimbleport.c: " __VA_ARGS__)
+
+#include "host/ble_hs.h"
+#include "nimble/nimble_npl.h"
+
+#include "extmod/mpbthci.h"
+#include "extmod/modbluetooth.h"
+#include "extmod/nimble/modbluetooth_nimble.h"
+#include "extmod/nimble/hal/hal_uart.h"
+#include "mpbthciport.h"
+
+// Get any pending data from the UART and send it to NimBLE's HCI buffers.
+// Any further processing by NimBLE will be run via its event queue.
+void mp_bluetooth_hci_poll(void) {
+    if (mp_bluetooth_nimble_ble_state >= MP_BLUETOOTH_NIMBLE_BLE_STATE_WAITING_FOR_SYNC) {
+        // DEBUG_printf("mp_bluetooth_hci_poll_uart %d\n", mp_bluetooth_nimble_ble_state);
+
+        // Run any timers.
+        mp_bluetooth_nimble_os_callout_process();
+
+        // Process incoming UART data, and run events as they are generated.
+        mp_bluetooth_nimble_hci_uart_process(true);
+
+        // Run any remaining events (e.g. if there was no UART data).
+        mp_bluetooth_nimble_os_eventq_run_all();
+    }
+
+    if (mp_bluetooth_nimble_ble_state != MP_BLUETOOTH_NIMBLE_BLE_STATE_OFF) {
+        // Call this function again in 128ms to check for new events.
+        // TODO: improve this by only calling back when needed.
+        mp_bluetooth_hci_poll_in_ms(128);
+    }
+}
+
+// --- Port-specific helpers for the generic NimBLE bindings. -----------------
+
+void mp_bluetooth_nimble_hci_uart_wfi(void) {
+    __WFE();
+
+    // This is called while NimBLE is waiting in ble_npl_sem_pend, i.e. waiting for an HCI ACK.
+    // Do not need to run events here (it must not invoke Python code), only processing incoming HCI data.
+    mp_bluetooth_nimble_hci_uart_process(false);
+}
+
+#endif // MICROPY_PY_BLUETOOTH && MICROPY_BLUETOOTH_NIMBLE

ports/alif/mpnimbleport.h

@@ -0,0 +1,32 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Jim Mussared
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_ALIF_NIMBLE_PORT_H
+#define MICROPY_INCLUDED_ALIF_NIMBLE_PORT_H
+
+// To allow MICROPY_HW_BLE_UART_ID to be resolved.
+
+#endif // MICROPY_INCLUDED_ALIF_NIMBLE_PORT_H