mimxrt/boards/MAKERDIARY_RT1011_NANO_KIT: Add new Makerdiary board.

This is a board based on the i.MX RT1011 in breadboard-friendly shape.  A
good basic board with 16M flash and regular pinout, providing access to
many GPIO_nn and GPIO_AD_nn Pins.

Signed-off-by: robert-hh <robert@hammelrath.com>

docs/mimxrt/pinout.rst

@@ -30,26 +30,28 @@ MIMXRT1170-EVK     Debug USB      D0/D1       D12/D11      D10/D13
 Adafruit Metro M7     -           D0/D1        D7/D3        A1/A0
 Olimex RT1010Py       -          RxD/TxD       D7/D8        D5/D6
 Seeed ARCH MIX        -         J3_19/J3_20  J4_16/J4_17  J4_06/J4_07
+Makerdiary RT1011     -           D9/D10      D13/A0       D11/D12
 =================  ===========  ===========  ===========  ===========
 
 |
 
-================  ===========  ===========  =======  =======  =====
-Board / Pin           UART4        UART5      UART6   UART7   UART8
-================  ===========  ===========  =======  =======  =====
-Teensy 4.0            16/17        21/20     25/24    28/29      -
-Teensy 4.1            16/17        21/20     25/24    28/29    34/35
-MIMXRT1010-EVK         -            -         -        -        -
-MIMXRT1015-EVK         -            -         -        -        -
-MIMXRT1020-EVK      D15/D14       A1/A0       -        -        -
-MIMXRT1050-EVK       A1/A0          -         -        -        -
-MIMXRT1050-EVKB      A1/A0          -         -        -        -
-MIMXRT1060-EVK       A1/A0          -         -        -        -
-MIMXRT1064-EVK       A1/A0          -         -        -        -
-MIMXRT1170-EVK      D15/D14      D25/D26    D33/D34  D35/D36    -
-Olimex RT1010Py        -            -         -        -        -
-Seeed ARCH MIX    J4_10/J4_11  J5_08/J5_12    -        -        -
-================  ===========  ===========  =======  =======  =====
+=================  ===========  ===========  =======  =======  =====
+Board / Pin            UART4        UART5      UART6   UART7   UART8
+=================  ===========  ===========  =======  =======  =====
+Teensy 4.0             16/17        21/20     25/24    28/29      -
+Teensy 4.1             16/17        21/20     25/24    28/29   34/35
+MIMXRT1010-EVK          -            -         -        -        -
+MIMXRT1015-EVK          -            -         -        -        -
+MIMXRT1020-EVK       D15/D14       A1/A0       -        -        -
+MIMXRT1050-EVK        A1/A0          -         -        -        -
+MIMXRT1050-EVKB       A1/A0          -         -        -        -
+MIMXRT1060-EVK        A1/A0          -         -        -        -
+MIMXRT1064-EVK        A1/A0          -         -        -        -
+MIMXRT1170-EVK       D15/D14      D25/D26    D33/D34  D35/D36    -
+Olimex RT1010Py         -            -         -        -        -
+Seeed ARCH MIX     J4_10/J4_11  J5_08/J5_12    -        -        -
+Makerdiary RT1011     A1/A2          -         -        -        -
+=================  ===========  ===========  =======  =======  =====
 
 .. _mimxrt_pwm_pinout:
 
@@ -188,7 +190,6 @@ LED_BLUE   F1/3/B
 =========  ===============
 Pin        Olimex RT1010PY
 =========  ===============
-D0           -
 D1         F1/0/B
 D2         F1/0/A
 D3         F1/1/B
@@ -197,13 +198,10 @@ D5         F1/2/B
 D6         F1/2/A
 D7         F1/3/B
 D8         F1/3/A
-D9            -
 D10        F1/0/B
 D11        F1/0/A
 D12        F1/1/B
 D13        F1/1/A
-D14           -
-A0            -
 A1         F1/2/B
 A2         F1/2/A
 A3         F1/3/B
@@ -214,6 +212,32 @@ CS0        F1/1/X
 SCK        F1/0/X
 =========  ===============
 
+|
+
+=========  =================
+Pin        Makerdiary RT1011
+=========  =================
+D1         F1/0/B
+D2         F1/0/A
+D3         F1/1/B
+D4         F1/1/A
+D5         F1/2/B
+D6         F1/2/A
+D7         F1/3/B
+D8         F1/3/A
+A3         F1/2/B
+A4         F1/2/A
+A5         F1/3/B
+A6         F1/3/A
+A9         F1/3/X
+A10        F1/2/X
+A11        F1/1/X
+SD1        F1/0/B
+SD2        F1/0/A
+LED        F1/1/B
+DIO        F1/0/X
+=========  =================
+
 Legend:
 
 * Qm/n:    QTMR module m, channel n
@@ -322,6 +346,7 @@ MIXMXRT1170-EVK    D10/-/D11/D12/D13          D28/-/D25/D24/D26        -/-/D14/D
 Adafruit Metro M7  -/-/MOSI/MISO/SCK                -                        -
 Olimex RT1010Py             -                 CS0/-/SDO/SDI/SCK        SDCARD with CS1
 Seeed ARCH MIX     J4_12/-/J4_14/J4_13/J4_15  J3_09/J3_05/J3_08_J3_11
+Makerdiary RT1011  A5/A2/A4/A3/A6             A11/A1/A10/A9/CLK
 =================  =========================  =======================  ===============
 
 Pins denoted with (*) are by default not wired at the board. The CS0 and CS1 signals
@@ -355,6 +380,7 @@ MIXMXRT1170-EVK    D14/D15      D1/D0        A4/A5        D26/D25  D19/D18
 Adafruit Metro M7  D14/D15      D0/D1
 Olimex RT1010Py      -          SDA1/SCL1    SDA2/SCL2     -        -
 Seeed ARCH MIX     J3_17/J3_16  J4_06/J4_07  J5_05/J5_04   -        -
+Makerdiary RT1011  D1/D2        A7/A8
 =================  ===========  ===========  ===========  =======  =======
 
 .. _mimxrt_i2s_pinout:
@@ -379,6 +405,7 @@ Adafruit Metro M7  1   D8     D10      D9      D12     D14      D15     D13
 Olimex RT1010Py    1   D8     D6       D7      D4      D1       D2      D3
 Olimex RT1010Py    3   -      D10      D9      D11     -        -       -
 MIMXRT_DEV         1   "MCK"  "SCK_TX" "WS_TX" "SD_TX" "SCK_RX" "WS_RX" "SD_RX"
+Makerdiary RT1011  1   D8     SD1      D7      D4      D1       D2      D3
 =================  ==  =====  ======== ======= ======= ======== ======= =======
 
 Symbolic pin names are provided for the MIMXRT_10xx_DEV boards.

ports/mimxrt/boards/MAKERDIARY_RT1011_NANO_KIT/board.json

@@ -0,0 +1,19 @@
+{
+    "deploy": [
+        "deploy_makerdiary.md"
+    ],
+    "docs": "",
+    "features": [
+        "External Flash",
+        "USB",
+        "microSD"
+    ],
+    "images": [
+        "MAKERDIARY_RT1011_NANO_KIT.jpg"
+    ],
+    "mcu": "mimxrt",
+    "product": "iMX RT1011 Nano Kit",
+    "thumbnail": "",
+    "url": "https://makerdiary.com/products/imxrt1011-nanokit",
+    "vendor": "Makerdiary"
+}

ports/mimxrt/boards/MAKERDIARY_RT1011_NANO_KIT/deploy_makerdiary.md

@@ -0,0 +1,34 @@
+## 1. Deploy the MicroPython firmware to the iMX RT1011 Nano Kit.
+
+The iMX RT1011 Nano Kit comes pre-installed with a UF2 bootloader.
+It can be started by pushing reset twice. Then the bootloader drive will
+appear. If that does not happen or the bootloader was lost, you can
+reinstall the bootloader using the procedure below.
+
+Once the bootloader is installed and started, you can install MicroPython
+by copying the .uf2 version of the firmware file to the bootloader
+drive. When the firmware is installed, the drive will disappear.
+
+## 2. Reinstall the bootloader iMX RT1011 Nano Kit.
+
+1. Get the NXP program sdphost for your operating system, e.g. from
+https://github.com/adafruit/tinyuf2/tree/master/ports/mimxrt10xx/sdphost.
+You can also get them from the NXP web sites.
+
+2. Get the UF2 boot-loader package https://github.com/adafruit/tinyuf2/releases/tag/0.21.0
+and extract the file  tinyuf2-makerdiary_rt1011-0.21.0.bin. You may as
+well go for a newer release.
+
+Now you have all files at hand that you will need for updating.
+
+1. Push and hold the "USR/BT" button, then press "RST", and release both buttons.
+
+2. Run the commands:
+
+```
+sudo ./sdphost -u 0x1fc9,0x0145 -- write-file 0x20206400 tinyuf2-makerdiary_rt1011-0.21.0.bin
+sudo ./sdphost -u 0x1fc9,0x0145 -- jump-address 0x20207000
+```
+Wait until a drive icon appears on the computer (or mount it explicitly).
+At this point the bootloader is installed. You can now copy the
+MicroPython .uf2 file to the board.

ports/mimxrt/boards/MAKERDIARY_RT1011_NANO_KIT/mpconfigboard.h

@@ -0,0 +1,87 @@
+#define MICROPY_HW_BOARD_NAME "iMX_RT1011_Nano_Kit"
+#define MICROPY_HW_MCU_NAME   "MIMXRT1011DAE5A"
+#define MICROPY_HW_USB_MANUFACTURER_STRING "Makerdiary"
+#define MICROPY_HW_USB_VID 0xf055
+#define MICROPY_HW_USB_PID 0x9802
+#define MICROPY_PY_OS_DUPTERM_BUILTIN_STREAM (0)
+
+// RT1011-Nanokit has 1 board LED
+#define MICROPY_HW_LED1_PIN (pin_GPIO_SD_04)
+#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin))
+#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))
+
+#define MICROPY_HW_NUM_PIN_IRQS (2 * 32)
+#define MICROPY_PY_MACHINE_SDCARD    (0)
+
+
+#define MICROPY_HW_UART_NUM     (sizeof(uart_index_table) / sizeof(uart_index_table)[0])
+#define MICROPY_HW_UART_INDEX   { 0, 1, 2, 3, 4 }
+
+#define IOMUX_TABLE_UART \
+    { IOMUXC_GPIO_10_LPUART1_TXD }, { IOMUXC_GPIO_09_LPUART1_RXD }, \
+    { IOMUXC_GPIO_AD_00_LPUART2_TXD }, { IOMUXC_GPIO_13_LPUART2_RXD }, \
+    { IOMUXC_GPIO_12_LPUART3_TXD }, { IOMUXC_GPIO_11_LPUART3_RXD }, \
+    { IOMUXC_GPIO_AD_02_LPUART4_TXD }, { IOMUXC_GPIO_AD_01_LPUART4_RXD },
+
+#define IOMUX_TABLE_UART_CTS_RTS \
+    { IOMUXC_GPIO_08_LPUART1_CTS_B }, { IOMUXC_GPIO_07_LPUART1_RTS_B }, \
+    { IOMUXC_GPIO_AD_08_LPUART2_CTS_B }, { IOMUXC_GPIO_AD_07_LPUART2_RTS_B }, \
+    { IOMUXC_GPIO_AD_14_LPUART3_CTS_B }, { IOMUXC_GPIO_AD_13_LPUART3_RTS_B }, \
+    { IOMUXC_GPIO_AD_14_LPUART4_CTS_B }, { IOMUXC_GPIO_AD_13_LPUART4_RTS_B },
+
+#define MICROPY_HW_SPI_INDEX { 1, 2 }
+
+#define IOMUX_TABLE_SPI \
+    { IOMUXC_GPIO_AD_06_LPSPI1_SCK }, { IOMUXC_GPIO_AD_05_LPSPI1_PCS0 }, \
+    { IOMUXC_GPIO_AD_04_LPSPI1_SDO }, { IOMUXC_GPIO_AD_03_LPSPI1_SDI }, \
+    { IOMUXC_GPIO_AD_02_LPSPI1_PCS1 }, \
+    { IOMUXC_GPIO_AD_12_LPSPI2_SCK }, { IOMUXC_GPIO_AD_11_LPSPI2_PCS0 }, \
+    { IOMUXC_GPIO_AD_10_LPSPI2_SDO }, { IOMUXC_GPIO_AD_09_LPSPI2_SDI }, \
+    { IOMUXC_GPIO_AD_01_LPSPI2_PCS1 }
+
+#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx }
+#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx }
+
+// Define mapping hardware I2C # to logical I2C #
+// SDA/SCL    HW-I2C    Logical I2C
+// SDA1/SCL1  LPI2C1 ->    0
+// SDA2/SCL2  LPI2C2 ->    1
+
+#define MICROPY_HW_I2C_INDEX   { 1, 2 }
+
+#define IOMUX_TABLE_I2C \
+    { IOMUXC_GPIO_02_LPI2C1_SCL }, { IOMUXC_GPIO_01_LPI2C1_SDA }, \
+    { IOMUXC_GPIO_AD_08_LPI2C2_SCL }, { IOMUXC_GPIO_AD_07_LPI2C2_SDA },
+
+#define MICROPY_PY_MACHINE_I2S (1)
+#define MICROPY_HW_I2S_NUM (3)
+#define I2S_CLOCK_MUX { 0, kCLOCK_Sai1Mux, 0, kCLOCK_Sai3Mux }
+#define I2S_CLOCK_PRE_DIV { 0, kCLOCK_Sai1PreDiv, 0, kCLOCK_Sai3PreDiv }
+#define I2S_CLOCK_DIV { 0, kCLOCK_Sai1Div, 0, kCLOCK_Sai3Div }
+#define I2S_IOMUXC_GPR_MODE { 0, kIOMUXC_GPR_SAI1MClkOutputDir, 0, kIOMUXC_GPR_SAI3MClkOutputDir }
+#define I2S_DMA_REQ_SRC_RX { 0, kDmaRequestMuxSai1Rx, 0, kDmaRequestMuxSai3Rx }
+#define I2S_DMA_REQ_SRC_TX { 0, kDmaRequestMuxSai1Tx, 0, kDmaRequestMuxSai3Tx }
+#define I2S_AUDIO_PLL_CLOCK (2U)
+
+#define I2S_GPIO(_hwid, _fn, _mode, _pin, _iomux) \
+    { \
+        .hw_id = _hwid, \
+        .fn = _fn, \
+        .mode = _mode, \
+        .name = MP_QSTR_##_pin, \
+        .iomux = {_iomux}, \
+    }
+
+#define I2S_GPIO_MAP \
+    { \
+        I2S_GPIO(1, MCK, TX, GPIO_08, IOMUXC_GPIO_08_SAI1_MCLK), /* pin D8 */ \
+        I2S_GPIO(1, SCK, RX, GPIO_01, IOMUXC_GPIO_01_SAI1_RX_BCLK), /* pin D1 */ \
+        I2S_GPIO(1, WS, RX, GPIO_02, IOMUXC_GPIO_02_SAI1_RX_SYNC), /* pin D2 */ \
+        I2S_GPIO(1, SD, RX, GPIO_03, IOMUXC_GPIO_03_SAI1_RX_DATA00), /* pin D3 */ \
+        I2S_GPIO(1, SCK, TX, GPIO_06, IOMUXC_GPIO_06_SAI1_TX_BCLK), /* pin D6 */ \
+        I2S_GPIO(1, WS, TX, GPIO_07, IOMUXC_GPIO_07_SAI1_TX_SYNC), /* pin D7 */ \
+        I2S_GPIO(1, SD, TX, GPIO_04, IOMUXC_GPIO_04_SAI1_TX_DATA00), /* pin D4 */ \
+        I2S_GPIO(3, SCK, TX, GPIO_SD_01, IOMUXC_GPIO_SD_01_SAI3_TX_BCLK), /* pin SD1 */ \
+        I2S_GPIO(3, WS, TX, GPIO_SD_00, IOMUXC_GPIO_SD_00_SAI3_TX_SYNC), /* pin SD0 */ \
+        I2S_GPIO(3, SD, TX, GPIO_SD_02, IOMUXC_GPIO_SD_02_SAI3_TX_DATA) /* pin SD2 */ \
+    }

ports/mimxrt/boards/MAKERDIARY_RT1011_NANO_KIT/mpconfigboard.mk

@@ -0,0 +1,16 @@
+MCU_SERIES = MIMXRT1011
+MCU_VARIANT = MIMXRT1011DAE5A
+
+MICROPY_FLOAT_IMPL = single
+MICROPY_HW_FLASH_TYPE = qspi_nor_flash
+MICROPY_HW_FLASH_SIZE = 0x1000000  # 16MB
+MICROPY_HW_FLASH_CLK = kFlexSpiSerialClk_100MHz
+MICROPY_HW_FLASH_QE_CMD = 0x31
+MICROPY_HW_FLASH_QE_ARG = 0x02
+
+USE_UF2_BOOTLOADER = 1
+
+CFLAGS += -DMICROPY_HW_FLASH_SAMPLE_CLK=kFLEXSPIReadSampleClk_LoopbackInternally
+
+SRC_C += \
+	hal/flexspi_nor_flash.c \

ports/mimxrt/boards/MAKERDIARY_RT1011_NANO_KIT/pins.csv

@@ -0,0 +1,42 @@
+A0,GPIO_AD_00
+A1,GPIO_AD_01
+A2,GPIO_AD_02
+A3,GPIO_AD_03
+A4,GPIO_AD_04
+A5,GPIO_AD_05
+A6,GPIO_AD_06
+A7,GPIO_AD_07
+A8,GPIO_AD_08
+A9,GPIO_AD_09
+A10,GPIO_AD_10
+A11,GPIO_AD_11
+A14,GPIO_AD_14
+
+D0,GPIO_00
+D1,GPIO_01
+D2,GPIO_02
+D3,GPIO_03
+D4,GPIO_04
+D5,GPIO_05
+D6,GPIO_06
+D7,GPIO_07
+D8,GPIO_08
+D9,GPIO_09
+D10,GPIO_10
+D11,GPIO_11
+D12,GPIO_12
+D13,GPIO_13
+
+SD0,GPIO_SD_00
+SD1,GPIO_SD_01
+SD2,GPIO_SD_02
+SD5,GPIO_SD_05
+# Test pads at the bottom side
+SD3,GPIO_SD_03
+SD4,GPIO_SD_04
+SD12,GPIO_SD_12
+SD13,GPIO_SD_13
+
+LED,GPIO_SD_04
+CLK,GPIO_AD_12
+DIO,GPIO_AD_13