4450 Commits

Author	SHA1	Message	Date
Alessandro Gatti	36aa7545b0	qemu/main: Make GC heap size configurable on a per-arch basis. ... In certain circumstances depending on the code size, the `deflate_decompress` test fails on both ARM and RV32 with a memory allocation failure error. The issue is mitigated by having a larger GC heap, in this case around 20 KBytes more than the original 100 KBytes default. This commit makes the GC heap size configurable on a per-arch basis, with both ARM and RV32 using the enlarged 120 KBytes heap. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-02 11:51:50 +11:00
Alessandro Gatti	268acb714d	py/emitinlinerv32: Add inline assembler support for RV32. ... This commit adds support for writing inline assembler functions when targeting a RV32IMC processor. Given that this takes up a bit of rodata space due to its large instruction decoding table and its extensive error messages, it is enabled by default only on offline targets such as mpy-cross and the qemu port. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-02 11:49:10 +11:00
Alessandro Gatti	a5270c84cf	tests/inlineasm: Make room for RV32IMC inline asm tests. ... Thumb/Thumb2 tests are now into their own subdirectory, as RV32IMC-specific tests will be added as part of the RV32 inline assembler support. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-01 10:44:50 +01:00
Damien George	def9a37994	qemu/mpconfigport: Enable VfsRom. ... Signed-off-by: Damien George <damien@micropython.org>	2024-12-23 13:04:55 +11:00
Damien George	d9378c9287	unix: Enable VfsRom on standard and coverage variants. ... Signed-off-by: Damien George <damien@micropython.org>	2024-12-23 13:04:55 +11:00
Alessandro Gatti	7ca6e5eb68	qemu: Add test_natmod target for RV32 and use as part of CI pipeline. ... This commit brings the natmod tests in the CI build process for the RV32 platform. Not all example natmods are tested at the moment, as `features` requires soft-float support, and `btree` needs thread-local storage support in `mpy_ld.py` when built with the CI's toolchain. Co-authored-by: Damien George <damien@micropython.org> Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-12-23 10:04:19 +11:00
robert-hh	136058496f	esp32/machine_timer: Restrict timer numbers for ESP32C6 to 0 and 1. ... The ESP32C6 has only one timer in each of the two groups. Also add a check for valid timer numbers. Addresses issue #16438. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-12-21 00:37:49 +11:00
Dryw Wade	39538e4c9a	rp2/boards/SPARKFUN_PROMICRO: Fix SparkFun Pro Micro RP2040 image. ... Signed-off-by: Dryw Wade <dryw.wade@sparkfun.com>	2024-12-19 17:13:40 +11:00
Peter Harper	a70a90ccfc	rp2/boards/RPI_PICO2_W: Add RISCV variant for Pico 2 W. ... Build with: make BOARD=RPI_PICO2_W BOARD_VARIANT=RISCV Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:39 +11:00
Peter Harper	1b611dab03	rp2/boards/RPI_PICO2_W: Add new Pico 2 W board definition. ... Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:39 +11:00
Peter Harper	4a6c246008	rp2/mphalport: Add mp_hal_is_pin_reserved() function. ... As cyw43 pins might be dynamic, add a function that returns if a pin is reserved. This is used by `MICROPY_HW_PIN_RESERVED` to prevent the pin IRQ from being reset across a soft-reset. Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:39 +11:00
Peter Harper	30163e0ae4	rp2/cyw43_configport: Define cyw43 pins. ... The cyw43 pins used to be hardcoded and `CYW43_PIN_WL_HOST_WAKE` and `CYW43_PIN_WL_REG_ON` were in the `pico_w.h` board header. This has been changed so the board header just defines the "default version of the pins, e.g. `CYW43_DEFAULT_PIN_WL_HOST_WAKE`, `CYW43_DEFAULT_PIN_WL_REG_ON` etc. Set the pin values in `cyw43_configport.`h so `cyw43-driver` sees them and allow them to be changed at runtime (dynamic) if required. Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:39 +11:00
Phil Howard	929d7a7526	rp2/CMakeLists.txt: Add components required by bootrom.h. ... Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:36 +11:00
Peter Harper	a93762a762	rp2/modmachine: Fix USB sleep on RP2350 MCUs. ... Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:30 +11:00
robert-hh	f4e4599523	ports: Fix machine.RTC.init() method so argument order matches the docs. ... This commit makes the argument ordering of `machine.RTC.init()` the same for all the ports that implement arguments to this method: cc3200, esp32, mimxrt and samd. The cc3200 argument ordering is used, which matches the documentation. Also document the availability and the differing semantics for the stm32 and renesas-ra port. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-12-19 16:04:47 +11:00
robert-hh	0302cd65e8	mimxrt/machine_rtc: Drop machine.RTC.now() method. ... This is not part of the common machine API. It's dropped on the mimxrt port and kept only on the cc3200 port for legacy. Also show the port availability of `RTC.now()` in the documentation. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-12-19 16:00:41 +11:00
Damien George	3c1722e705	stm32: Fix extraction of hse/hsi/pllm values from preprocessed source. ... The expressions for the `micropy_hw_hse_value` etc variables may contain parenthesis, eg `micropy_hw_hse_value = ((25) * 1000000)`. To handle such a case, simplify the regex and always use `eval(found)` to evaluate the expression. Signed-off-by: Damien George <damien@micropython.org>	2024-12-19 00:55:31 +11:00
Andrew Leech	7924b31050	stm32: Generate PLL tables from pre-processed headers. ... Allows boards to configure their HSE and PLL values in variants. Signed-off-by: Andrew Leech <andrew@alelec.net>	2024-12-18 16:55:53 +11:00
Andrew Leech	22804fccf3	stm32/boards/WEACT_F411_BLACKPILL: Add WeAct F411 'blackpill' boards. ... Adds board profile for the WeAct F411 'blackpill' which is a quite popular low cost ST dev board. This board also has optional spiflash so can be purchased in a few different configurations. Builds for v3.1 with no SPI Flash by default. Includes variants for different board versions and spi flash sizes. Signed-off-by: Andrew Leech <andrew@alelec.net>	2024-12-18 16:55:53 +11:00
Damien George	23bfa95d34	stm32/extint: Fix EXTI IRQ handlers for H5 MCUs. ... The existing EXTI IRQ handlers are moved from `stm32_it.c` to `extint.c` to keep them with related code. A macro is defined to make it easier to define the handler function that handles one line, and correct handlers added for STM32H5xx MCUs. Also, to prevent errors in the future, `MP_STATIC_ASSERT(<irqn> > 0)` is added to each handler function to check that the correct `IRQn` constant is used, which corresponds to the handler function name. Signed-off-by: Damien George <damien@micropython.org>	2024-12-18 00:22:21 +11:00
Damien George	a2efafcce3	stm32/pin: Exclude Pin.cpu/Pin.board if they contain no entries. ... Signed-off-by: Damien George <damien@micropython.org>	2024-12-17 23:53:26 +11:00
Damien George	1c2cdf9f6d	stm32/pin: Add config option to exclude Pin alternate function. ... Signed-off-by: Damien George <damien@micropython.org>	2024-12-17 23:53:03 +11:00
Damien George	bd6edf00bb	stm32/pin: Add option to exclude legacy Pin methods and constants. ... This is enabled by default, but disabled when MICROPY_PREVIEW_VERSION_2 is enabled. The intention is that these methods and constants are deprecated in MicroPython 2.x. Signed-off-by: Damien George <damien@micropython.org>	2024-12-17 23:53:03 +11:00
Damien George	46a37a09fd	qemu/mpconfigport: Enable VFS reader, loading .mpy files and io.IOBase. ... This allows importing from the VFS, and enables the following 7 additional tests: builtin_execfile, io_iobase, json_dump_iobase, import_mpy_invalid, import_mpy_native, import_mpy_native_gc, vfs_userfs. Signed-off-by: Damien George <damien@micropython.org>	2024-12-17 23:40:52 +11:00
Damien George	8e4c809694	unix,windows: Force _FILE_OFFSET_BITS=64 to fix 32-bit file ABI. ... On 64-bit systems this should have no effect. On 32-bit systems it will force 64-bit file sizes and fixes directory listing on certain 32-bit ports. This option should work on pretty much all 32-bit systems these days. Signed-off-by: Damien George <damien@micropython.org>	2024-12-16 11:56:03 +11:00
Sebastian Romero	5f2d05d417	esp32: Enable machine.USBDevice to configure USB at runtime. ... This adds support for `machine.USBDevice` to S2 and S3 boards. Signed-off-by: Sebastian Romero <s.romero@arduino.cc>	2024-12-16 11:41:40 +11:00
iabdalkader	94343e20e5	stm32/boards/STM32F429DISC: Fix SDRAM configuration. ... Define SDRAM frequency and refresh cycles. This was missed in commit 17808e7b74. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-11 12:17:40 +11:00
Angus Gratton	d4d1d4798c	esp32: Simplify thread cleanup. ... Now we only support the case of !CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP, can simplify the cleanup code. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-12-10 23:21:46 +11:00
Angus Gratton	d90aff5e13	esp32: Remove IDF-version-specific sdkconfig. ... This reverts commit 27279e69b4 (plus removes some additional references to the SDKCONFIG_IDF_VERSION_SPECIFIC CMake variable.) Relevant sdkconfig options are added into sdkconfig.base now that IDF >=5.2.0 is required. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-12-10 23:21:46 +11:00
Angus Gratton	6e5d8d0093	esp32: Drop support for ESP-IDF below V5.2.0. ... Specifically, remove all conditional compilation for these earlier versions and change the idf_component.yml specifiers to require >=5.2.0. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-12-10 23:21:46 +11:00
Alessandro Gatti	82e382a399	esp32/mpconfigport: Use the appropriate wait-for-interrupt opcode. ... When threading is disabled, the pending events handling code would wait for an incoming interrupt once there's no more work to do. This bit of code was Xtensa-specific and wouldn't compile on a RISC-V based MCU. This commit provides the RISC-V equivalent to that part of the code, allowing to make threadless MicroPython builds on RISC-V based MCUs. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-12-10 21:57:40 +11:00
Andrew Leech	9441ce6e3c	esp32: Use capability defines to configure features. ... This updates esp32 code where appropriate to replace ifdef's based on a list of specific chips with a feature SOC_* definition. This should simplify adding new esp32-* chips in future, deferring chip feature support to the IDF. Signed-off-by: Andrew Leech <andrew@alelec.net>	2024-12-10 21:47:05 +11:00
Alessandro Gatti	e8c3f31ba2	mimxrt/machine_rtc: Deprecate RTC.cancel in MicroPython v2. ... The current documentation for the `machine.RTC` class contains information about the `RTC.cancel` method for cancelling pending alarms. However only two ports (cc3200 and mimxrt) implement this functionality but under a different name: `RTC.alarm_cancel`. The mimxrt port also implements `RTC.cancel` but it is aliased to `RTC.alarm_cancel` anyway. To maintain naming consistency, this commit updates the documentation to officially define `RTC.alarm_cancel` as the method to call to cancel pending alarms and deprecates mimxrt's `RTC.cancel` implementation. `RTC.cancel` in the mimxrt port is thus scheduled for removal in MicroPython v2. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-12-10 12:16:03 +11:00
Angus Gratton	31a1e2b96d	rp2: Pass V=1 or BUILD_VERBOSE to rp2 build. ... Similar to esp32. Previously rp2 could build verbose by passing VERBOSE=1, which is picked up by Makefiles generated from CMake. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-12-10 11:28:38 +11:00
Angus Gratton	160a4812cd	esp32: Pass V=1 or BUILD_VERBOSE through to idf.py when building. ... Allows verbose build to work the same on esp32 port as other ports. To minimise copy/paste, split the BUILD_VERBOSE section of mkenv.mk out to its own verbose.mk and include this in the port Makefile. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-12-10 11:28:38 +11:00
Daniël van de Giessen	5fb846df67	esp32: Fix machine_touchpad compiling on IDFv5.3. ... Signed-off-by: Damien George <damien@micropython.org>	2024-12-10 11:20:15 +11:00
Andrew Leech	5564f3042c	esp32: Add basic espressif IDF v5.3 compatibility. ... Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au> Signed-off-by: Damien George <damien@micropython.org>	2024-12-10 11:20:00 +11:00
Angus Gratton	b20687d0e7	esp32: Fix link failure due to link library order. ... When a wrapped symbol is provided in its own file, it's possible for the linker to skip that file entirely and not return to it depending on the order of libraries passed on the linker command line. This is because these wrapped symbols create linker cycles (libmain_espXX depends on liblwip but liblwip now also depends on libmain for the wrapped functions in lwip_patch.c, for example.) Linker failure for symbols in lwip_patch.c was reproducible if mDNS was disabled in the board configuration. This commit adds an explicit undefined symbol for each file, to ensure the linker will add the wrapped objects on its first pass. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-12-10 11:11:31 +11:00
iabdalkader	2bee8e1b8c	mimxrt/mpconfigport: Update FATFS config to align with other ports. ... Make this port use the same FATFS config as stm32, rp2, renesas-ra. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 11:05:05 +11:00
iabdalkader	a2cdf9a95f	renesas-ra/mpconfigport: Switch FATFS LFN to type 2. ... LFN type 2 uses the stack to allocate the internal working buffer for LFN, which is thread-safe and saves about 512 bytes of BSS memory (at the expense of needing that much memory on the stack). Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 11:04:59 +11:00
iabdalkader	309aa26811	rp2/mpconfigport: Switch FATFS LFN to type 2. ... LFN type 2 uses the stack to allocate the internal working buffer for LFN, which is thread-safe and saves about 512 bytes of BSS memory (at the expense of needing that much memory on the stack). Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 11:04:49 +11:00
iabdalkader	fd01cdd203	stm32/mpconfigport: Switch FATFS LFN to type 2. ... LFN type 2 uses the stack to allocate the internal working buffer for LFN, which is thread-safe and saves about 512 bytes of BSS memory (at the expense of needing that much memory on the stack). Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 11:02:52 +11:00
iabdalkader	89191b00ea	stm32/main: Deinitialize SPI and I2C on soft-reset. ... Following UART, CAN, Timer, etc. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 10:54:16 +11:00
iabdalkader	405aa69887	stm32/pyb_i2c: Add pyb_i2c_deinit_all function. ... I2C objects can remain active after a soft-reboot because they are statically allocated and lack a finalizer to collect and deinitialize them. This commit adds a `pyb_i2c_deinit_all()` function for I2C, similar to other peripherals such as UART, DAC, etc. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 10:53:47 +11:00
iabdalkader	d42e39d87d	stm32/spi: Add spi_deinit_all function. ... SPI objects can remain active after a soft-reboot because they are statically allocated and lack a finalizer to collect and deinitialize them. This commit adds a `spi_deinit_all()` functions for SPI, similar to other peripherals such as UART, DAC, etc. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 10:53:24 +11:00
iabdalkader	17808e7b74	stm32/sdram: Make SDRAM refresh count configurable by a board. ... Refresh count calculations were using a hard-coded SDRAM frequency and refresh cycles, so change them to values that can be set by a board. And set these options to their existing values on STM32F769DISC and STM32F7DISC boards. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 10:49:50 +11:00
iabdalkader	47d9988df2	stm32/boards: Rename SDRAM frequency config option to make units clear. ... Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 10:49:29 +11:00
iabdalkader	46ca78e23f	stm32/boards: Update Arduino board configs for SPI reset and bootloader. ... Update ARDUINO_GIGA, ARDUINO_OPTA, ARDUINO_NICLA_VISION and ARDUINO_PORTENTA_H7 to: - Enable SPI flash soft-reset. - Disable enter bootloader via reset. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 10:44:33 +11:00
iabdalkader	d5d366beef	nrf/boards/ARDUINO_NANO_33_BLE_SENSE: Update LED and timer config. ... Changes: - Enable hardware timer. - Define LED pins. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 10:37:02 +11:00
iabdalkader	67b4e6236b	mimxrt: Switch to shared TinyUSB descriptor. ... This removes duplicated TinyUSB configuration and port-specific code. Tested on RT1062, CDC+MSC still working. @robert-hh tested CDC with 1011, 1015, 1020 and 1176. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-10 10:29:21 +11:00