16471 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Damien George	6dcbdec4de	lib/micropython-lib: Update submodule to latest. ... This brings in: - umqtt.simple: add optional socket timeout to connect method - aioespnow,webrepl: use recommended network.WLAN.IF_[AP|STA] constants - unittest: allow SkipTest to work within a subTest - unittest: always use "raise" with an argument Signed-off-by: Damien George <damien@micropython.org>	2024-12-06 13:48:07 +11:00
Damien George	a8422439ab	tests/run-tests.py: Print .out file when there is no .exp file. ... So that a failing unittest-based test has its entire log printed when using `run-tests.py --print-failures`. Signed-off-by: Damien George <damien@micropython.org>	2024-12-06 13:47:21 +11:00
Damien George	a2554f0957	tests/run-tests.py: Add support for tests to use unittest. ... All the existing tests require a .exp file (either manually specified or generated running the test first under CPython) that is used to check the output of running the test under MicroPython. The test passes if the output matches the expected output exactly. This has worked very well for a long time now. But some of the newer hardware tests (eg UART, SPI, PWM) don't really fit this model, for the following main reasons: - Some but not all parts of the test should be skipped on certain hardware targets. With the expected-output approach, skipping tests is either all or nothing. - It's often useful to output diagnostics as part of the test, which should not affect the result of the test (eg the diagnostics change from run to run, like timing values, or from target to target). - Sometimes a test will do a complex check and then print False/True if it passed or not, which obscures the actual test result. To improve upon this, this commit adds support to `run-tests.py` for a test to use `unittest`. It detects this by looking at the end of the output after running the test, looking for the test summary printed by `unittest` (or an error message saying `unittest` was not found). If the test uses `unittest` then it should not have a .exp file, and it's not run under CPython. A `unittest` based test passes or fails based on the summary printed by `unittest`. Note that (as long as `unittest` is installed on the target) the tests are still fully independent and you can still run them without `run-tests.py`: you just run it as usual, eg `mpremote run <test.py>`. This is very useful when creating and debugging tests. Note also that the standard test suite testing Python semantics (eg everything in `tests/basics/`) will probably never use unittest. Only more advanced tests will, and ones that are not runnable under CPython. Signed-off-by: Damien George <damien@micropython.org>	2024-12-06 13:41:52 +11:00
Amirreza Hamzavi	406bccc753	docs/library/binascii: Add docs for binascii.crc32 method. ... Signed-off-by: Amirreza Hamzavi <amirrezahamzavi2000@gmail.com>	2024-12-03 22:22:55 +11:00
chuangjinglu	2e796d6c3e	docs,ports: Fix some comments and error messages with doubled-up words. ... Signed-off-by: chuangjinglu <chuangjinglu@outlook.com>	2024-11-30 13:08:33 +11:00
Alessandro Gatti	3de3821abf	extmod/modplatform: Add Android to the recognised platforms list. ... This commit adds code to distinguish between regular Linux and Android, also adding a specific entry for the platform libc. The reported libc is marked as "bionic" and its version matches the Android platform API version (there are no definitions for a specific bionic version). Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-11-30 12:42:51 +11:00
Alessandro Gatti	09cf01d7c1	extmod/modplatform: Add Clang to the known compilers list. ... This commit adds support to distinguish between GCC and Clang to report the appropriate compiler version. Usually Clang also disguises itself as GCC for compatibility reasons, but these changes look for Clang-specific definitions first to avoid that problem. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-11-30 12:42:51 +11:00
Alessandro Gatti	579e840de6	extmod/modplatform: Distinguish AArch64 from AArch32. ... This commit adds a new platform architecture name for Arm CPUs running in 64 bits mode ("aarch64"). The 32 bits name is left as "arm" to maintain compatibility with existing code. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-11-30 12:42:51 +11:00
Angus Gratton	beabef5aac	esp32: Add missing network.STAT_CONNECT_FAIL constant. ... The esp32 port had network.STAT_ASSOC_FAIL for the same purpose, but this is undocumented and different to all other ports. That constant is now deprecated. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-30 12:36:03 +11:00
dependabot[bot]	6dd976cc5c	github/workflows: Bump codecov/codecov-action from 4 to 5. ... Bumps [codecov/codecov-action](https://github.com/codecov/codecov-action) from 4 to 5. - [Release notes](https://github.com/codecov/codecov-action/releases) - [Changelog](https://github.com/codecov/codecov-action/blob/main/CHANGELOG.md) - [Commits](https://github.com/codecov/codecov-action/compare/v4...v5) --- updated-dependencies: - dependency-name: codecov/codecov-action dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>	2024-11-30 12:05:16 +11:00
Angus Gratton	d49c1e836c	tools/ci.sh: Remove explicit macOS pkg-config install. ... Reasons to remove this: - GitHub's macOS runners install this package by default nowadays. - Brew renamed this package to 'pkgconf' so installing the old name on top of the new package name has started failing. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-30 11:24:36 +11:00
Angus Gratton	eb80b04944	tests/extmod: Workaround CPython warning in asyncio_new_event_loop test. ... This started failing in CI on the mingw build, after CPython updated to 3.12.7. The test prints two warnings during interpreter shutdown of "Task was destroyed but it is pending!". This didn't happen on other CPython builds, and I think that's because of finalizer order in CPython interpreter shutdown but not certain (the loop finalizer calls loop.close() if not already closed). Adding explicit calls to loop.close() causes the warning to be printed on every run with CPython 3.12.7 on Linux. Next, added the workaround exception handler to swallow this exception as MicroPython doesn't produce an equivalent. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 23:12:34 +11:00
Angus Gratton	8ec067272a	github/workflows: Workaround using CPython 3.12 in MSYS2 builds. ... Once MSYS2 repository updates past Python 3.12, this commit can be reverted. Explanation: CPython 3.12 can't pass sys_settrace_features test (see parent commit for explanation). MSYS2 mingw-w64-ARCH-python package is currently 3.12.7. MSYS2 doesn't recommend installing old packages from their archive (due to library dependencies), so switch to the GitHub CI setup-python action for now. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 23:12:06 +11:00
Angus Gratton	8e11e5f1a1	tests/misc/sys_settrace_features.py: Add note about CPython 3.12 issue. ... CPython 3.12 has a documented issue with settrace for opcodes, apparently due to PEP 669. "This behavior will be changed back in 3.13 to be consistent with previous versions." No easy way to make the test pass on CPython 3.12, but at least this helps signal what the problem is to anyone who runs into a failure. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 23:11:36 +11:00
Angus Gratton	3b3b48892f	py/objfloat: Workaround non-constant NAN definition on Windows MSVC. ... Recent MSVC versions have changed the definition of NAN to a non-constant expression! This is a bug, C standard says it should be a constant. Good explanation and workaround at: https://stackoverflow.com/a/79199887 This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 23:11:24 +11:00
robert-hh	da692d01ac	nrf/drivers/ticker: Reset slow ticker callback count on soft reboot. ... The micro:bit board (and probably other boards using the music or display module) locked up on soft reboot. Reason was a buffer overflow caused by an index counter, which was not reset on soft_reboot. That's fixed in this commit. Tested with a micro:bit board, performing a series of soft reboots. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-11-28 23:02:46 +11:00
Corran Webster	e70048cf59	extmod/modframebuf: Fix 0 radius bug in FrameBuffer.ellipse. ... This fixes a bug in FrameBuffer.ellipse where it goes into an infinite loop if both radii are 0. This fixes the bug with a simple pre-check to see if both radii are 0, and in that case sets a single pixel at the center. This is consistent with the behaviour of the method when called with just one of the radii set to 0, where it will draw a horizontal or vertical line of 1 pixel width. The pixel is set with setpixel_checked so it should handle out-of-bounds drawing correctly. This fix also includes three new tests: one for the default behaviour, one for drawing out-of-bounds, and one for when the sector mask is 0. Fixes issue #16053. Signed-off-by: Corran Webster <cwebster@unital.dev>	2024-11-28 22:56:44 +11:00
Angus Gratton	154d141965	docs,esp32: Update machine.TouchPad docs for ESP32-S2 and ESP32-S3. ... Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 15:45:39 +11:00
Angus Gratton	66e699e8a5	esp32: Fix machine.TouchPad startup on ESP32-S2 and S3. ... Closes #13178. TouchPad confirmed working on both chips, and fixes the the ESP32-S3 reading constant max value. Was unable to reproduce the bug on ESP32-S2 but this may be due to my test setup, and it still works with the fix. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 15:45:39 +11:00
Angus Gratton	ed3c75a3af	esp32: Use hardware version for touchpad macro defines. ... ESP32 has hardware V1 and S2/S3 has V2, and future chips may have different versions. This should still compile to the same binary before and after. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 15:45:39 +11:00
Angus Gratton	0e383a31b9	tests: Add basic wlan test. ... Includes adding some ESP8266 port output to the ignored output list for the multitest runner. This test passes on ESP8266 and various ESP32s (including talking to each other). Without the fix in the parent commit, ESP32 AP will fail if the station can report its channel (i.e. channel is wrong). Testing with a CYW43 (RPI_PICO_W) currently fails but I have some fixes to submit so it can pass as well. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 15:39:06 +11:00
Angus Gratton	951a10e707	esp32: Fix setting WLAN channel in AP mode. ... - Previously the call to esp_wifi_set_channel() would be immediately overridden by calling esp_wifi_config(...) with the previous channel set. - AP interface doesn't seem to need more than esp_wifi_config(...) to work. It will automatically configure 40MHz bandwidth and place the secondary channel using similar logic to what was being explicitly calculated here. - However, calling esp_wifi_set_channel() on the STA interface is necessary if using this interface with ESP-NOW (without connecting to an AP). So the esp_wifi_set_channel() call is kept in for this purpose. Without this, tests/multi_espnow/70_channel.py fails. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 15:39:06 +11:00
Angus Gratton	7647c828de	tests/multi_espnow: Add channel setting test, add some docs. ... Test currently passes. It was added so it can be used to check for regressions when fixing channel selection for AP mode in a follow-up commit. Also add some docs about how channel setting is observed to work for ESP-NOW. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-28 15:39:06 +11:00
Andrew Leech	78d017fc4e	py/usermod.cmake: If USER_C_MODULES is a folder add micropython.cmake. ... This mirrors how it works when using a Makefile. Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>	2024-11-20 17:38:39 +11:00
Andrew Leech	dccd206f4c	py/usermod.cmake: Add check that any specified USER_C_MODULES exists. ... Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>	2024-11-20 17:34:41 +11:00
Andrew Leech	b65e89107c	py/py.mk: Add check that any specified USER_C_MODULES folder exists. ... Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>	2024-11-20 17:34:41 +11:00
Angus Gratton	181800eebd	extmod/network_cyw43: Allow configuring active AP interface. ... Configuring the AP for cyw43 writes to some buffers that are only sent to the modem when the interface is brought up. This means you can't configure the AP after calling active(True), the new settings seem to be accepted but the radio doesn't change. This is different to the WLAN behaviour on other ports. The esp8266 port requires calling active(True) on the AP before configuring, even. Fix this by bouncing the AP interface after a config change, if it's active. Configuring with active(False) still works the same as before. Adds a static variable to track interface active state, rather than relying on the LWIP interface state. This is because the interface state is updated by a driver callback and there's a race: if code calls active(True) and then config(a=b) then the driver doesn't know it's active yet and the changes aren't correctly applied. It is possible this pattern will cause the AP to come up briefly with the default "PICOabcd" SSID before being reconfigured, however (due to the aforementioned race condition) it seems like this may not happen at all before the new config is applied. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-20 14:42:26 +11:00
Damien George	af743eaf59	extmod/network_cyw43: Fix uninitialised variable in status('stations'). ... The `num_stas` was uninitialised and if it happened to take the value 0 then no results were returned. It now has the correct maximum value. Signed-off-by: Damien George <damien@micropython.org>	2024-11-20 14:23:20 +11:00
Angus Gratton	f562aa1291	extmod/network_cyw43: Fix isconnected() result on AP interface. ... This function is documented to return True if any stations are connected to the AP. Without this fix it returns True whenever the driver has brought the AP interface up. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-20 14:21:57 +11:00
Damien George	c1b8e65c8e	docs: Change copyright line to mention "authors and contributors". ... The docs have been authored by many people now. Instead of singling out individuals in the copyright line, prefer to mention all "MicroPython authors and contributors". Individual contributions can still be discovered via the git history. Signed-off-by: Damien George <damien@micropython.org>	2024-11-19 11:39:39 +11:00
Angus Gratton	c5d74fe468	docs/library: Note link between machine.soft_reset() and sys.exit(). ... This is currently an implementation detail of MicroPython rather than by design. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-19 10:58:00 +11:00
Angus Gratton	a23277e3b0	docs/esp32: Add a factory reset page. ... This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-19 10:57:53 +11:00
Angus Gratton	9361a9f50a	docs/rp2: Add a small factory reset page. ... This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-19 10:57:47 +11:00
Angus Gratton	0e7c3901b8	docs: Add a "Reset and Boot Sequence" reference page. ... Previously individual ports documented these aspects to varying degrees, but most of the information is common to all ports. In particular, this adds a canonical explanation of `boot.py` and `main.py`. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-11-19 10:57:26 +11:00
robert-hh	cbffe61f96	samd/mboot/README.md: Add information about the bootloader source. ... Includes the LICENSE file of the source and the specific board files for the Xplained Pro board. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-11-18 18:31:16 +01:00
robert-hh	ceae0e1494	samd/samd_flash: Make flash read/write methods access self parameters. ... Use `self` (the first argument) instead of the global `samd_flash_obj` when accessing the `flash_base` parameter. This allows there to be multiple flash objects for various types of filesystem. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-11-18 23:54:42 +11:00
robert-hh	4a159d16fe	samd/boards/SAMD21_XPLAINED_PRO: Use the SPI flash for the file system. ... The initial settings did not support it. The change required to add a dedicated handling of the Adesto 1MByte flash of the XPLAINED PRO board, which does not support the sfdp feature. Fixes the ID check of the Adesto/Renesas 1MByte flash. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-11-18 23:51:02 +11:00
robert-hh	85de67f55d	samd/mboot: Provide a UF2 bootloader for SAMD21 Xplained Pro. ... A bootloader labelled for the SAMD21 XPLAINED PRO board. The only difference to a generic bootloader are the names and ID of the USB port and the label of the drive that is opened. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-11-18 23:50:20 +11:00
robert-hh	4d36ecf8a8	samd/boards/SAMD21_XPLAINED_PRO: Add specific deploy instructions. ... Add instructions to install a bootloader to the board. The SAMD21 XPLAINED PRO board is shipped without a bootloader, which therefore has to be installed once before it can be used with MicroPython. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-11-18 23:49:39 +11:00
robert-hh	5a70850b30	samd/machine_uart: Add full support for 9-bit data. ... Prior to this commit, 9-bit UART data could be specified in the constructor and was transmitted, but the 9th bit was set to 0 when sending, and ignored when receiving. This commit completes 9-bit support in that the 9th bit is taken from the data. 9-bit data has to be provided with `uart.write()` and and read with `uart.read()` as two bytes for each transmitted item, low order byte first. The data length supplied with `uart.write()` and requested by `uart.read()` has to be even, which is checked. The size of the UART buffers will be transparently doubled to cater for 9-bit data. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-11-18 23:05:46 +11:00
robert-hh	e2532e0f72	mimxrt/machine_pwm: Fix a few inconsistencies with PWM output. ... Changes in this commit: - When setting PWM parameters of a FLEXPWM AB channel twice within a PWM cycle, the second setting was ignored. Now the second setting persists. - With `duty_u16(0)` a FLEXPWM X channel was set to high impedance. Now it is set to low impedance with value 0 for `invert=False`, and 1 for `invert=True`. - The align parameter requires a duty rate and frequency to be set. Align will now be ignored if freq or duty are missing. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-11-18 16:11:13 +11:00
robert-hh	898407defb	ports: Make PWM duty_u16 have an upper value of 65535 across all ports. ... The following ports used 65536 as the upper value (100% duty cycle) and are changed in this commit to use 65535: esp8266, mimxrt, nrf, samd. Tested that output is high at `duty_u16(65535)` and low at `duty_u16(0)`. Also verified that at `duty_u16(32768)` the high and low pulse have the same length. Partially reverts #10850, commits 9c7ad68165 and 2ac643c15b. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-11-18 16:05:56 +11:00
Damien George	5dc9eda195	extmod/vfs_blockdev: Support bool return from Python read/write blocks. ... Commit f4ab9d9247 inadvertently broke some Python block devices, for example esp32 and stm32 SDCard classes. Those classes return a bool from their `readblocks` and `writeblocks` methods instead of an integer errno code. With that change, both `False` and `True` return values are now be interpreted as non-zero and hence the block device call fails. The fix in this commit is to allow a bool and explicitly convert `True` to 0 and `False` to `-MP_EIO`. Signed-off-by: Damien George <damien@micropython.org>	2024-11-13 14:21:29 +11:00
Damien George	611d8f9ce8	esp32/modsocket: Fix getaddrinfo hints to set AI_CANONNAME. ... Because the `ai_canonname` field is subsequently used. ESP32_GENERIC_S3 (at least) crashes with IDF 5.2.3 without this set. Signed-off-by: Damien George <damien@micropython.org>	2024-11-13 13:35:37 +11:00
Daniël van de Giessen	77406b4240	extmod/network_ppp: Allow stream=None to suspend PPP. ... This allows the stream to be set to `None`, which essentially stops all PPP communication without disconnecting the session. This allows replacing the stream on-the-fly to suspend it, for example to send AT commands to a modem without completely disconnecting and re-establishing the PPP connection: uart = ppp.config('stream') ppp.config(stream=None) uart.write(b'+++') # do some AT commands uart.write(b'ATO\r\n') ppp.config(stream=uart) Any attempted communication by PPP while the stream is not connected will register as simple packet loss to the LwIP stack because we return 0 for any write calls, and protocols like TCP will then automatically handle retrying. Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>	2024-11-13 13:11:32 +11:00
Daniël van de Giessen	161e2bd37d	extmod/network_ppp: Add stream config parameter. ... This makes the stream that the PPP object wraps, which is normally only set once via the constructor, accessible and configurable via the `ppp.config()` method. Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>	2024-11-13 13:10:58 +11:00
Damien George	4fd5b72a8b	tools/mpremote: Support trailing slash on dest for non-recursive copy. ... This fixes a regression in db59e55fe7: prior to that commit `mpremote` supported trailing slashes on the destination of a normal (non-recursive) copy. Add back support for that, with the semantics that a trailing slash requires the destination to be an existing directory. Also add a test for this. Signed-off-by: Damien George <damien@micropython.org>	2024-11-13 11:51:35 +11:00
Damien George	3b6024a699	tools/mpremote: Add test for forced copy. ... Signed-off-by: Damien George <damien@micropython.org>	2024-11-13 11:51:35 +11:00
Damien George	76e6c6345c	tools/mpremote: Make sure stdout and stderr output appear in order. ... mpremote error messages now go to stderr, so make sure stdout is flushed before printing them. Also update the test runner to capture error messages. Signed-off-by: Damien George <damien@micropython.org>	2024-11-13 11:51:35 +11:00
Damien George	69023622ee	tests/net_hosted: Improve and simplify non-block-xfer test. ... CPython changed its non-blocking socket behaviour recently and this test would not run under CPython anymore. So the following steps were taken to get the test working again and then simplify it: - Run the test against CPython 3.10.10 and capture the output into the .exp file for the test. - Run this test on unix port of MicroPython and verify that the output matches the CPython 3.10.10 output in the new .exp file (it did). From now on take unix MicroPython as the source of truth for this test when modifying it. - Remove all code that was there for CPython compatibility. - Make it print out more useful information during the test run, including names of the OSError errno values. - Add polling of the socket before the send/write/recv/read to verify that the poll gives the correct result in non-blocking mode. Tested on unix MicroPython, ESP32_GENERIC, PYBD_SF2 and RPI_PICO_W boards. Signed-off-by: Damien George <damien@micropython.org>	2024-11-13 11:44:09 +11:00