16411 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Damien George	919756cea4	extmod/modlwip: Fix IGMP address type when IPv6 is enabled. ... This was missed in 628abf8f25. The the bug was that, when IPv6 is enabled, the `sizeof(ip_addr_t)` is much larger than IPv4 size, which is what's needed for IGMP addressing. Fixes issue #16100. Signed-off-by: Damien George <damien@micropython.org>	2024-11-04 13:12:18 +11:00
Damien George	85053adb24	tests/run-tests.py: Add mimxrt and samd platforms. ... Signed-off-by: Damien George <damien@micropython.org>	2024-11-04 12:48:10 +11:00
Damien George	8978102f35	tests/run-tests.py: Change --target/--device options to --test-instance. ... Previously to this commit, running the test suite on a bare-metal board required specifying the target (really platform) and device, eg: $ ./run-tests.py --target pyboard --device /dev/ttyACM1 That's quite a lot to type, and you also need to know what the target platform is, when a lot of the time you either don't care or it doesn't matter. This commit makes it easier to run the tests by replacing both of these options with a single `--test-instance` (`-t` for short) option. That option specifies the executable/port/device to test. Then the target platform is automatically detected. The `--test-instance` can be passed: - "unix" (the default) to use the unix version of MicroPython - "webassembly" to test the webassembly port - anything else is considered a port/device to pass to Pyboard There are also some shortcuts to specify a port/device, following `mpremote`: - a<n> is short for /dev/ttyACM<n> - u<n> is short for /dev/ttyUSB<n> - c<n> is short for COM<n> For example: $ ./run-tests.py -t a1 Note that the default test instance is "unix" and so this commit does not change the standard way to run tests on the unix port, by just doing `./run-tests.py`. As part of this change, the platform (and it's native architecture if it supports importing native .mpy files) is show at the start of the test run. Signed-off-by: Damien George <damien@micropython.org>	2024-11-04 12:47:47 +11:00
Damien George	f2ac471989	tests/run-tests.py: Simplify the way target-specific tests are given. ... Signed-off-by: Damien George <damien@micropython.org>	2024-11-04 12:02:55 +11:00
Damien George	c88a9d60a1	tests/basics/deque2.py: Add tests for deque subscript-from-end. ... Signed-off-by: Damien George <damien@micropython.org>	2024-11-04 11:22:43 +11:00
Jan Sturm	7e1098befe	py/objdeque: Fix buffer overflow in deque_subscr. ... In `deque_subscr()`, if `index_val` equals `self->alloc`, the index correction `index_val -= self->alloc` does not execute, leading to an out-of-bounds access in `self->items[index_val]`. The fix in this commit ensures that the index correction is applied whenever `index_val >= self->alloc`, preventing access beyond the allocated buffer size. Signed-off-by: Jan Sturm <jansturm92@googlemail.com>	2024-11-04 11:21:56 +11:00
Jan Klusáček	0e490b7c8f	docs/reference/packages: Fix description of --target option in mip. ... Descripton of mip usage with micropython port suggest using it like this: ./micropython -m mip install --target=third-party pkgname But it should be called without equal sign: ./micropython -m mip install --target third-party pkgname Signed-off-by: honza.klu@gmail.com	2024-10-31 23:23:58 +11:00
Angus Gratton	787c424cfc	tools/ci.sh: Fix reference commit for code size comparison. ... Previously the code size comparison was between the merge base (i.e. where the PR branched), and the generated merge commit into master. If the PR branch was older than current master, this meant the size comparison could incorrectly include changes already merged on master but missing from the PR branch. This commit changes it to compare the generated merge commit against current master, i.e. the size impact if this PR was to be merged. This commit also disables running the code size check on "push", it now only runs on pull_request events. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-10-31 23:19:55 +11:00
Angus Gratton	9591b0a53c	tools/ci.sh: Fix commit msg checking when PR branch HEAD behind master. ... Fixes the problem noted at https://github.com/micropython/micropython/pull/15547#issuecomment-2434479702 which is that, because default CI HEAD for a PR is a (generated) merge commit into the master branch's current HEAD, then if the PR branch isn't fully rebased then the commit check runs against commits from master as well! Also drops running this check on push, the pull_request event is triggered by default on open and update ("synchronized" event), which probably covers the cases where this check should run. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-10-31 23:16:25 +11:00
Alessandro Gatti	d34b15ac6f	pic16bit: Make it build with recent XC16 versions. ... The PIC16 port didn't catch up with the other ports, so it required a bit of work to make it build with the latest version of XC16. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-10-30 17:21:30 +11:00
Andrew Leech	548babf8a0	esp32/machine_pwm: Use IDF functions to calculate resolution correctly. ... This commit fixes PWM configuration across C3, C6, S2 and S3 chips, which was broken by 6d799378ba. Without this fix the PWM frequency is limited to a maximum of 2446Hz (on S2 at least). Signed-off-by: Andrew Leech <andrew@alelec.net>	2024-10-30 16:28:17 +11:00
Alessandro Gatti	86c71a0307	esp32/machine_hw_spi: Reject invalid number of bits in constructor. ... This commit adds an extra bit of parameters validation to the SPI bus constructor on ESP32. Passing 0 as the number of bits would trigger a division by zero error when performing read/write operations on an SPI bus created in such a fashion. Fixes issue #5910. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-10-30 15:14:30 +11:00
Glenn Moloney	9ea8d2a031	tools/mpremote: Fix UnboundLocalError in Transport.fs_writefile(). ... The variable `written` was being used before it was defined in the `fs_writefile()` method of the Transport class. This was causing an `UnboundLocalError` to be raised when the `progress_callback` was not provided. Fixes issue #16084. Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>	2024-10-28 12:23:10 +11:00
Angus Gratton	043ba45bc3	esp32: Add some notes about the different CMake files. ... Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-10-28 11:24:15 +11:00
Angus Gratton	ff70a91581	esp32: Move the linker wrap options out of the project CMakeLists. ... For in-tree builds, these are effectively equivalent. However for out-of-tree builds it's preferable to have as little as possible in the top-level CMakeLists.txt file (as the out-of-tree build needs its own copy). This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-10-28 11:24:15 +11:00
Steve Holden	4601dcb8a1	rp2/README: Remove redundant global statement from example code. ... Since `led` is not being rebound inside the `tick` function the standard Python name resolution method will find it. Signed-off-by: Steve Holden <steve@holdenweb.com>	2024-10-28 11:16:04 +11:00
Damien George	44dc6eb30d	all: Bump version to 1.25.0-preview. ... Signed-off-by: Damien George <damien@micropython.org> v1.25.0-preview	2024-10-28 11:08:24 +11:00
Damien George	f212bbe837	all: Bump version to 1.24.0. ... Signed-off-by: Damien George <damien@micropython.org> v1.24.0	2024-10-26 01:43:23 +11:00
Damien George	18c9abc329	lib/micropython-lib: Update submodule to latest. ... This brings in: - requests improvements with overriding headers - use non-u versions of built-in modules, including asyncio - fix to logging so StreamHandler calls parent constructor - various fixes to usb-device packages - fixes to lora sx126x and sx127x drivers - improvements to unix-ffi/sqlite3 - support additional gap_connect arguments in aioble Signed-off-by: Damien George <damien@micropython.org>	2024-10-25 01:26:58 +11:00
iabdalkader	4c54335195	stm32/boards/ARDUINO_OPTA: Add Opta expansion module. ... Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-10-25 01:19:54 +11:00
iabdalkader	57bc98f499	stm32/boards/ARDUINO_NICLA_VISION: Add SE05x driver. ... Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-10-25 01:19:48 +11:00
iabdalkader	28009a78cf	stm32/boards/ARDUINO_PORTENTA_H7: Add SE05x driver. ... Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-10-25 01:19:06 +11:00
iabdalkader	bab6a016b3	lib/arduino-lib: Update submodule. ... Changes: - Add ISO7816, APDU and SE05x package. - Add support for Opta Expansion protocol. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-10-25 01:18:33 +11:00
iabdalkader	68f1c20145	extmod/modtls_mbedtls: Support alternate sign callbacks in Python. ... This commit enables the implementation of alternative mbedTLS cryptography functions, such as ECDSA sign and verify, in pure Python. Alternative functions are implemented in Python callbacks, that get invoked from wrapper functions when needed. The callback can return None to fall back to the default mbedTLS function. A common use case for this feature is with secure elements that have drivers implemented in Python. Currently, only the ECDSA alternate sign function wrapper is implemented. Tested signing with a private EC key stored on an NXP SE05x secure element. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-10-25 01:16:06 +11:00
iabdalkader	2644f577f1	extmod/modtls_mbedtls: Add a thread-global ptr for current SSL context. ... This is necessary for mbedTLS callbacks that do not carry any user state, so those callbacks can be customised per SSL context. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-10-25 01:12:36 +11:00
Damien George	09ea901317	tests/extmod: Add test to compare time_ns with time. ... They should be close together. Signed-off-by: Damien George <damien@micropython.org>	2024-10-24 23:24:09 +11:00
Damien George	1ec0c9b886	tests/extmod: Use time_ns instead of time in lfs mtime test. ... Because VfsLfs2 uses time_ns to create timestamps for files, and for the test to give consistent results it also needs to use this same function. Signed-off-by: Damien George <damien@micropython.org>	2024-10-24 23:24:09 +11:00
Damien George	120ac0f8d2	rp2/modmachine: Re-sync time_ns offset when coming out of lightsleep. ... Prior to this fix, `tests/extmod/vfs_lfs_mtime.py` would fail when run after the `tests/ports/rp2/rp2_lightsleep.py` test, because `time.time_ns()` would have a large and constant offset from `time.time()`. Fix this by re-syncing the time-ns offset when coming out of lightsleep. Signed-off-by: Damien George <damien@micropython.org>	2024-10-24 23:24:09 +11:00
Damien George	ca6aed7649	tests/extmod: Fix access of RTC class in machine.RTC test. ... This previously passed on some targets that automatically import the `machine` module in `boot.py`. Signed-off-by: Damien George <damien@micropython.org>	2024-10-24 16:29:43 +11:00
Damien George	6d98280fda	tests/extmod: Add a simple test for machine.RTC. ... Tests at least that the datetime can be set and get correctly. Signed-off-by: Damien George <damien@micropython.org>	2024-10-24 11:43:03 +11:00
Damien George	47741e2757	rp2/datetime_patch: Fix year and month offset for mktime wrapper. ... Signed-off-by: Damien George <damien@micropython.org>	2024-10-24 11:22:59 +11:00
Damien George	43bd57f94b	shared/timeutils: Document the range of year/month/day etc input values. ... These differ to, eg, the standard `mktime()` function. Signed-off-by: Damien George <damien@micropython.org>	2024-10-24 11:22:22 +11:00
Jared Hancock	078ead24f3	extmod/network_wiznet5k: Reset mDNS when interface is brought up. ... The LwIP interface is removed in wiznet5k_deinit() which is called as part of the init sequence. Therefore, if using mDNS, then the interface will need to be re-added when bringing the interface up. Additionally, this allows to set the hostname from MicroPython code prior to bringing the interface up and mDNS responding to the (new) hostname. This allows the hostname to be configured and saved on the flash or be based on dynamic information such as the MAC or unique_id(). Signed-off-by: Jared Hancock <jared.hancock@centeredsolutions.com>	2024-10-23 16:29:28 +11:00
Damien George	3f54e5dff2	tests/extmod: Support esp32,mimxrt,stm32,samd ports in UART TX test. ... Getting this test running on stm32- and mimxrt-based boards requires adding a small delay after constructing the UART so that the initial idle frame has time to be transmitted before the test starts. Also, the timing margin needs to account for an additional 1-bit worth of time on some MCUs. Thanks to @robert-hh for the esp32, mimxrt and samd settings. Signed-off-by: Damien George <damien@micropython.org>	2024-10-22 22:21:17 +11:00
Alessandro Gatti	6328958a39	rp2/mpconfigport: Leave callable pointers alone on RV32. ... The port configuration file tagged callable pointers' LSB on both Arm and RISC-V variants. This is needed on Arm due to Thumb/Thumb2 code addresses having their LSB set, but on RISC-V this is not required. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-10-22 15:01:53 +11:00
Plaque FCC	324871f380	qemu/mcu/rv32: Fix test of mcause value in lookup_cause. ... Signed-off-by: Plaque FCC <plaque-fcc@github>	2024-10-22 14:52:01 +11:00
Volodymyr Shymanskyy	8fef67bda5	esp32/modmachine: Allow building with USB CDC disabled. ... Signed-off-by: Volodymyr Shymanskyy <vshymanskyi@gmail.com>	2024-10-22 14:45:51 +11:00
Damien George	0646177997	tests/extmod: Make invalid-blockdev test work consistently on all ports. ... Some ports (eg stm32) configure the FAT driver differently (eg with multi-partition support) and that leads to a slightly different sequence of block reads, compared to other configurations (eg rp2). Comment out the printing in `readblocks()` so the tests are deterministic (the printing is still useful for debugging). Signed-off-by: Damien George <damien@micropython.org>	2024-10-22 14:32:51 +11:00
Damien George	f7abb52847	tests/run-tests.py: Skip large viper test on esp8266. ... Signed-off-by: Damien George <damien@micropython.org>	2024-10-22 14:31:13 +11:00
Damien George	52f2ba5677	tests/micropython: Tweak ringio test for targets with terse errors. ... Signed-off-by: Damien George <damien@micropython.org>	2024-10-22 14:31:13 +11:00
Damien George	1e3b24238e	tests/extmod: Adjust ssl/tls tests to run on targets with axTLS. ... Signed-off-by: Damien George <damien@micropython.org>	2024-10-22 14:31:13 +11:00
Damien George	7d442373af	tests/extmod: Config SPI test for esp8266 and skip SoftTimer test. ... Signed-off-by: Damien George <damien@micropython.org>	2024-10-22 14:31:13 +11:00
Corran Webster	d1574de3b6	extmod/modframebuf: Fix FrameBuffer size check for stride corner-cases. ... This is a fix for issue #15944, and handles corner cases in the FrameBuffer code when using stride values where the last line's stride may extend past the end of the underlying buffer. This commit includes extra tests for these corner cases. For example a GS8 format FrameBuffer with a width of 8, height of 2 and stride of 10 should be able to fit into a buffer of size 18 (10 bytes for the first horizontal line, and 8 bytes for the second -- the full 10 bytes are not needed). Similarly a 1 by 9 FrameBuffer in MONO_VLSB format with a stride of 10 should be able to fit into a buffer of length 11 (10 bytes for the first 8 lines, and then one byte for the 9th line. Being able to do this is particularly important when cropping the corner of an existing FrameBuffer, either to copy a sprite or to clip drawing. Signed-off-by: Corran Webster <cwebster@unital.dev>	2024-10-22 13:05:31 +11:00
Damien George	7ed480fc6f	Revert "stm32/machine_uart: Allow changing only the baudrate." ... This reverts commit c94a3205b0. The idea behind this reverted commit was that it allowed to reconfigure the UART to change only the baudrate, which is important in the context of a PPP connection where the baudrate may be changed as part of the protocol. Also, other ports like the rp2 port have this behaviour, where individual parameters of the UART can be changed with the `.init()` method. But this commit was no good for a few reasons: 1. It's a subtle breaking change to the UART API, because existing code that constructs or initialises a UART with just the baudrate would expect all other parameters to be reset to their defaults. But with this commit those parameters would remain unchanged. 2. Constructing a UART like `UART(1, 9600)` also hits this code path of only changing the baudrate and does not reset other parameters, which is unexpected. 3. It doesn't support setting the baudrate via keyword, eg `UART.init(baudrate=9600)`. 4. The `timeout_char` field is not updated when changing only the baudrate, which can lead to unexpected timeouts when reading/writing. Due to point (4), this commit broke the `tests/ports/stm32/uart.py` test, the `uart.writechar(1)` has a timeout because the `uart.init(2400)` does not set the `timeout_char` for the new baudrate. Points (2)-(4) could be fixed, but point (1) (being a breaking change) would remain as an issue. So the commit is reverted. Signed-off-by: Damien George <damien@micropython.org>	2024-10-22 11:50:05 +11:00
Damien George	97af1001ae	rp2/machine_uart: Make it so TX is done only when no longer busy. ... Prior to this commit, when flushing a UART on the rp2 port, it returns just before the last character is sent out the wire. Fix this by waiting until the BUSY flag is cleared. This also fixes the behaviour of `UART.txdone()` to return `True` only when the last byte has gone out. Updated docs and tests to match. The test now checks that UART TX time is very close to the expected time (prior, it was just testing that the TX time was less than the expected time). Signed-off-by: Damien George <damien@micropython.org>	2024-10-22 10:17:05 +11:00
Damien George	1b89c503db	py/objtype: Don't delegate lookup of descriptor methods to __getattr__. ... When descriptors are enabled, lookup of the `__get__`, `__set__` and `__delete__` descriptor methods should not be delegated to `__getattr__`. That follows CPython behaviour. Signed-off-by: Damien George <damien@micropython.org>	2024-10-16 15:03:30 +11:00
Andrew Leech	3fecab58a0	esp32/mphalport: Always poll stdin ring-buffer to include UART use. ... This fixes a regression introduced in commit 4247921c4e, where this ring-buffer polling was accidentally put inside the `#if MICROPY_HW_ESP_USB_SERIAL_JTAG`. Signed-off-by: Andrew Leech <andrew@alelec.net>	2024-10-16 14:50:11 +11:00
Damien George	838f21298a	unix/main: Add --version command-line option. ... CPython also has this option. Signed-off-by: Damien George <damien@micropython.org>	2024-10-15 14:44:10 +11:00
Damien George	51663b9aa7	rp2/machine_uart: Clear timeout_char when UART is first constructed. ... Otherwise a previous value of `timeout_char` may be left over after a soft reset. Signed-off-by: Damien George <damien@micropython.org>	2024-10-15 12:23:06 +11:00
Damien George	b33f64792f	tests/run-tests.py: Only run inlineasm tests on rp2 ARM targets. ... Signed-off-by: Damien George <damien@micropython.org>	2024-10-15 12:23:06 +11:00