4467 Commits

Author	SHA1	Message	Date
iabdalkader	b79ceeca8f	stm32/boards: Reserve SPI bus when it's used for external flash storage. ... Reserve SPI flash bus used for storage or XIP. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2025-01-16 15:26:14 +11:00
iabdalkader	5fa960c719	stm32/spi: Retain the state of special SPI buses on soft reboot. ... Reserved and static SPI buses must remain initialized during a soft reboot as they may be used for SPI flash storage or XIP. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2025-01-16 15:26:02 +11:00
iabdalkader	a82fc718a7	stm32/mpconfigboard_common: Add MICROPY_HW_SPI_IS_STATIC macro. ... A board should make this return true if the specified SPI instances should not be deinitialized on soft-reboot. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2025-01-16 15:25:43 +11:00
Alessandro Gatti	a46e842807	qemu/boards/SABRELITE.mk: Remove exception for omitted tests. ... This commit re-introduces `tests/extmod/vfs_rom.py` and `tests/float/math_domain.py` to the test suite, as the issues that made them fail have now been addressed. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-16 12:52:56 +11:00
Alessandro Gatti	e84c9abfc2	qemu/Makefile: Increase GC heap size to 140KiB. ... This commit increases the GC heap size from 120KiB to 140KiB, as it is needed to make the full test suite pass on SABRELITE when ran through the armv6 native emitter. This is needed as the code output by the armv6 native emitter is limited to 4-bytes opcodes and thus takes more space than other ARM emitters. To keep things aligned, the RV32 port also got its heap size increased even though it is not needed on that platform right now. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-16 12:51:11 +11:00
Alessandro Gatti	3225c1bc66	qemu: Disable native emitter for the MICROBIT board. ... The Micro:Bit machine definition in Qemu has soft MMU support enabled, which is currently not compatible with the way MicroPython generates code that needs to call back into non-emitted code. As a stop-gap solution, the native code emitter for the MICROBIT board is turned off. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-16 12:11:09 +11:00
Alessandro Gatti	1232a83555	qemu/mcu/arm: Dump exception cause and registers on machine error. ... When a CPU exception is raised when emulating a Thumb-capable processor, the default exception handler would simply enter in an endless loop without providing any further information. This commit adds a more complete exception handler that dumps to STDOUT the exception cause and the status of the registers at the moment of the exception. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-16 12:10:56 +11:00
Damien George	ca71df0081	esp32/boards: Remove remaining "id" entries from board.json. ... This entry was originally used to override the firmware filenames generated by the build server, but these days all filenames should match the board directory name. So, remove the "id" entry and let the default be used. This is a follow-up to 1a99f74063 (these three boards were added after that change). Signed-off-by: Damien George <damien@micropython.org>	2025-01-15 16:48:10 +11:00
Dryw Wade	0a9cc9014a	rp2/boards/SPARKFUN_THINGPLUS_RP2350: Add SparkFun Thing Plus RP2350. ... Signed-off-by: Dryw Wade <dryw.wade@sparkfun.com>	2025-01-15 11:06:40 +11:00
Dryw Wade	99ac8193ea	rp2/boards/SPARKFUN_PROMICRO_RP2350: Add SparkFun Pro Micro RP2350. ... Signed-off-by: Dryw Wade <dryw.wade@sparkfun.com>	2025-01-11 14:35:41 +11:00
Dryw Wade	7964a435ea	rp2/machine_bitstream: Tweak MP_HAL_BITSTREAM_NS_OVERHEAD for RP2350. ... See https://github.com/micropython/micropython/issues/16190#issuecomment-2466155919 Signed-off-by: Dryw Wade <dryw.wade@sparkfun.com>	2025-01-11 14:23:51 +11:00
Dryw Wade	065d45f9ec	rp2/mphalport: Fix mp_hal_pin_low/high() for pin>=32. ... Fixes issue #16190. Signed-off-by: Dryw Wade <dryw.wade@sparkfun.com>	2025-01-11 14:23:40 +11:00
Damien George	b2a4501461	qemu/Makefile: Add test_full target to run a comprehensive test suite. ... The tests now include `--via-mpy` and `--via-mpy --emit native`, which will test more cases of the native emitter under both ARM and RISC-V. Signed-off-by: Damien George <damien@micropython.org>	2025-01-06 17:57:48 +11:00
Damien George	bb1e7de5c6	qemu/boards: Exclude Thumb2 tests and tests failing with native emitter. ... The `asmbcc`, `asmbitops`, `asmconst` and `asmit` tests fail to compile with mpy-cross on armv6 architecture (used by SABRELITE), so explicitly exclude them. The `math_domain` and `vfs_rom` tests fail when compiled to native machine code, so also exclude those unconditionally. Signed-off-by: Damien George <damien@micropython.org>	2025-01-06 17:57:29 +11:00
Victor Rajewski	61e2931f86	stm32/mboot: Add mboot version string. ... Adds a configurable version string to a known location at the end of mboot flash section. Also stores the options mboot was built with, eg usb and which filesystems are supported. A board can override the defaults, or disable the version string entirely by setting MBOOT_VERSION_ALLOCATED_BYTES=0. Signed-off-by: Victor Rajewski <victor@allumeenergy.com.au>	2025-01-02 12:59:14 +11:00
Alessandro Gatti	931a768f55	tests/run-tests.py: Detect inlineasm support and add tests if needed. ... This commit implements a method to detect at runtime if inline assembler support is enabled, and if so which platform it targets. This allows clean test runs even on modified version of ARM-based ports where inline assembler support is disabled, running inline assembler tests on ports that have such feature not enabled by default and manually enabled, and allows to always run the correct inlineasm tests for ports that support more than one architecture (esp32, qemu, rp2). Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-02 11:52:28 +11:00
Alessandro Gatti	24482a93ef	rp2/mpconfigport: Enable RV32 inline assembly support. ... This commit enables by default inline assembly support for the RP2 target when it is operating in RISC-V mode. This brings the feature set when in RISC-V mode to parity with what's available in ARM mode. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-02 11:52:28 +11:00
Alessandro Gatti	36aa7545b0	qemu/main: Make GC heap size configurable on a per-arch basis. ... In certain circumstances depending on the code size, the `deflate_decompress` test fails on both ARM and RV32 with a memory allocation failure error. The issue is mitigated by having a larger GC heap, in this case around 20 KBytes more than the original 100 KBytes default. This commit makes the GC heap size configurable on a per-arch basis, with both ARM and RV32 using the enlarged 120 KBytes heap. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-02 11:51:50 +11:00
Alessandro Gatti	268acb714d	py/emitinlinerv32: Add inline assembler support for RV32. ... This commit adds support for writing inline assembler functions when targeting a RV32IMC processor. Given that this takes up a bit of rodata space due to its large instruction decoding table and its extensive error messages, it is enabled by default only on offline targets such as mpy-cross and the qemu port. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-02 11:49:10 +11:00
Alessandro Gatti	a5270c84cf	tests/inlineasm: Make room for RV32IMC inline asm tests. ... Thumb/Thumb2 tests are now into their own subdirectory, as RV32IMC-specific tests will be added as part of the RV32 inline assembler support. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2025-01-01 10:44:50 +01:00
Damien George	def9a37994	qemu/mpconfigport: Enable VfsRom. ... Signed-off-by: Damien George <damien@micropython.org>	2024-12-23 13:04:55 +11:00
Damien George	d9378c9287	unix: Enable VfsRom on standard and coverage variants. ... Signed-off-by: Damien George <damien@micropython.org>	2024-12-23 13:04:55 +11:00
Alessandro Gatti	7ca6e5eb68	qemu: Add test_natmod target for RV32 and use as part of CI pipeline. ... This commit brings the natmod tests in the CI build process for the RV32 platform. Not all example natmods are tested at the moment, as `features` requires soft-float support, and `btree` needs thread-local storage support in `mpy_ld.py` when built with the CI's toolchain. Co-authored-by: Damien George <damien@micropython.org> Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-12-23 10:04:19 +11:00
robert-hh	136058496f	esp32/machine_timer: Restrict timer numbers for ESP32C6 to 0 and 1. ... The ESP32C6 has only one timer in each of the two groups. Also add a check for valid timer numbers. Addresses issue #16438. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-12-21 00:37:49 +11:00
Dryw Wade	39538e4c9a	rp2/boards/SPARKFUN_PROMICRO: Fix SparkFun Pro Micro RP2040 image. ... Signed-off-by: Dryw Wade <dryw.wade@sparkfun.com>	2024-12-19 17:13:40 +11:00
Peter Harper	a70a90ccfc	rp2/boards/RPI_PICO2_W: Add RISCV variant for Pico 2 W. ... Build with: make BOARD=RPI_PICO2_W BOARD_VARIANT=RISCV Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:39 +11:00
Peter Harper	1b611dab03	rp2/boards/RPI_PICO2_W: Add new Pico 2 W board definition. ... Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:39 +11:00
Peter Harper	4a6c246008	rp2/mphalport: Add mp_hal_is_pin_reserved() function. ... As cyw43 pins might be dynamic, add a function that returns if a pin is reserved. This is used by `MICROPY_HW_PIN_RESERVED` to prevent the pin IRQ from being reset across a soft-reset. Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:39 +11:00
Peter Harper	30163e0ae4	rp2/cyw43_configport: Define cyw43 pins. ... The cyw43 pins used to be hardcoded and `CYW43_PIN_WL_HOST_WAKE` and `CYW43_PIN_WL_REG_ON` were in the `pico_w.h` board header. This has been changed so the board header just defines the "default version of the pins, e.g. `CYW43_DEFAULT_PIN_WL_HOST_WAKE`, `CYW43_DEFAULT_PIN_WL_REG_ON` etc. Set the pin values in `cyw43_configport.`h so `cyw43-driver` sees them and allow them to be changed at runtime (dynamic) if required. Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:39 +11:00
Phil Howard	929d7a7526	rp2/CMakeLists.txt: Add components required by bootrom.h. ... Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:36 +11:00
Peter Harper	a93762a762	rp2/modmachine: Fix USB sleep on RP2350 MCUs. ... Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>	2024-12-19 16:54:30 +11:00
robert-hh	f4e4599523	ports: Fix machine.RTC.init() method so argument order matches the docs. ... This commit makes the argument ordering of `machine.RTC.init()` the same for all the ports that implement arguments to this method: cc3200, esp32, mimxrt and samd. The cc3200 argument ordering is used, which matches the documentation. Also document the availability and the differing semantics for the stm32 and renesas-ra port. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-12-19 16:04:47 +11:00
robert-hh	0302cd65e8	mimxrt/machine_rtc: Drop machine.RTC.now() method. ... This is not part of the common machine API. It's dropped on the mimxrt port and kept only on the cc3200 port for legacy. Also show the port availability of `RTC.now()` in the documentation. Signed-off-by: robert-hh <robert@hammelrath.com>	2024-12-19 16:00:41 +11:00
Damien George	3c1722e705	stm32: Fix extraction of hse/hsi/pllm values from preprocessed source. ... The expressions for the `micropy_hw_hse_value` etc variables may contain parenthesis, eg `micropy_hw_hse_value = ((25) * 1000000)`. To handle such a case, simplify the regex and always use `eval(found)` to evaluate the expression. Signed-off-by: Damien George <damien@micropython.org>	2024-12-19 00:55:31 +11:00
Andrew Leech	7924b31050	stm32: Generate PLL tables from pre-processed headers. ... Allows boards to configure their HSE and PLL values in variants. Signed-off-by: Andrew Leech <andrew@alelec.net>	2024-12-18 16:55:53 +11:00
Andrew Leech	22804fccf3	stm32/boards/WEACT_F411_BLACKPILL: Add WeAct F411 'blackpill' boards. ... Adds board profile for the WeAct F411 'blackpill' which is a quite popular low cost ST dev board. This board also has optional spiflash so can be purchased in a few different configurations. Builds for v3.1 with no SPI Flash by default. Includes variants for different board versions and spi flash sizes. Signed-off-by: Andrew Leech <andrew@alelec.net>	2024-12-18 16:55:53 +11:00
Damien George	23bfa95d34	stm32/extint: Fix EXTI IRQ handlers for H5 MCUs. ... The existing EXTI IRQ handlers are moved from `stm32_it.c` to `extint.c` to keep them with related code. A macro is defined to make it easier to define the handler function that handles one line, and correct handlers added for STM32H5xx MCUs. Also, to prevent errors in the future, `MP_STATIC_ASSERT(<irqn> > 0)` is added to each handler function to check that the correct `IRQn` constant is used, which corresponds to the handler function name. Signed-off-by: Damien George <damien@micropython.org>	2024-12-18 00:22:21 +11:00
Damien George	a2efafcce3	stm32/pin: Exclude Pin.cpu/Pin.board if they contain no entries. ... Signed-off-by: Damien George <damien@micropython.org>	2024-12-17 23:53:26 +11:00
Damien George	1c2cdf9f6d	stm32/pin: Add config option to exclude Pin alternate function. ... Signed-off-by: Damien George <damien@micropython.org>	2024-12-17 23:53:03 +11:00
Damien George	bd6edf00bb	stm32/pin: Add option to exclude legacy Pin methods and constants. ... This is enabled by default, but disabled when MICROPY_PREVIEW_VERSION_2 is enabled. The intention is that these methods and constants are deprecated in MicroPython 2.x. Signed-off-by: Damien George <damien@micropython.org>	2024-12-17 23:53:03 +11:00
Damien George	46a37a09fd	qemu/mpconfigport: Enable VFS reader, loading .mpy files and io.IOBase. ... This allows importing from the VFS, and enables the following 7 additional tests: builtin_execfile, io_iobase, json_dump_iobase, import_mpy_invalid, import_mpy_native, import_mpy_native_gc, vfs_userfs. Signed-off-by: Damien George <damien@micropython.org>	2024-12-17 23:40:52 +11:00
Damien George	8e4c809694	unix,windows: Force _FILE_OFFSET_BITS=64 to fix 32-bit file ABI. ... On 64-bit systems this should have no effect. On 32-bit systems it will force 64-bit file sizes and fixes directory listing on certain 32-bit ports. This option should work on pretty much all 32-bit systems these days. Signed-off-by: Damien George <damien@micropython.org>	2024-12-16 11:56:03 +11:00
Sebastian Romero	5f2d05d417	esp32: Enable machine.USBDevice to configure USB at runtime. ... This adds support for `machine.USBDevice` to S2 and S3 boards. Signed-off-by: Sebastian Romero <s.romero@arduino.cc>	2024-12-16 11:41:40 +11:00
iabdalkader	94343e20e5	stm32/boards/STM32F429DISC: Fix SDRAM configuration. ... Define SDRAM frequency and refresh cycles. This was missed in commit 17808e7b74. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2024-12-11 12:17:40 +11:00
Angus Gratton	d4d1d4798c	esp32: Simplify thread cleanup. ... Now we only support the case of !CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP, can simplify the cleanup code. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-12-10 23:21:46 +11:00
Angus Gratton	d90aff5e13	esp32: Remove IDF-version-specific sdkconfig. ... This reverts commit 27279e69b4 (plus removes some additional references to the SDKCONFIG_IDF_VERSION_SPECIFIC CMake variable.) Relevant sdkconfig options are added into sdkconfig.base now that IDF >=5.2.0 is required. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-12-10 23:21:46 +11:00
Angus Gratton	6e5d8d0093	esp32: Drop support for ESP-IDF below V5.2.0. ... Specifically, remove all conditional compilation for these earlier versions and change the idf_component.yml specifiers to require >=5.2.0. Signed-off-by: Angus Gratton <angus@redyak.com.au>	2024-12-10 23:21:46 +11:00
Alessandro Gatti	82e382a399	esp32/mpconfigport: Use the appropriate wait-for-interrupt opcode. ... When threading is disabled, the pending events handling code would wait for an incoming interrupt once there's no more work to do. This bit of code was Xtensa-specific and wouldn't compile on a RISC-V based MCU. This commit provides the RISC-V equivalent to that part of the code, allowing to make threadless MicroPython builds on RISC-V based MCUs. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-12-10 21:57:40 +11:00
Andrew Leech	9441ce6e3c	esp32: Use capability defines to configure features. ... This updates esp32 code where appropriate to replace ifdef's based on a list of specific chips with a feature SOC_* definition. This should simplify adding new esp32-* chips in future, deferring chip feature support to the IDF. Signed-off-by: Andrew Leech <andrew@alelec.net>	2024-12-10 21:47:05 +11:00
Alessandro Gatti	e8c3f31ba2	mimxrt/machine_rtc: Deprecate RTC.cancel in MicroPython v2. ... The current documentation for the `machine.RTC` class contains information about the `RTC.cancel` method for cancelling pending alarms. However only two ports (cc3200 and mimxrt) implement this functionality but under a different name: `RTC.alarm_cancel`. The mimxrt port also implements `RTC.cancel` but it is aliased to `RTC.alarm_cancel` anyway. To maintain naming consistency, this commit updates the documentation to officially define `RTC.alarm_cancel` as the method to call to cancel pending alarms and deprecates mimxrt's `RTC.cancel` implementation. `RTC.cancel` in the mimxrt port is thus scheduled for removal in MicroPython v2. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>	2024-12-10 12:16:03 +11:00