docs: Bump version to 1.3.7.

Erratum in froh.

.travis.yml

@@ -17,6 +17,7 @@ script:
   - make -C bare-arm
   - make -C qemu-arm
   - make -C stmhal
+  - make -C stmhal -B MICROPY_PY_WIZNET5K=1 MICROPY_PY_CC3K=1
   - make -C stmhal BOARD=STM32F4DISC
   - make -C teensy
   - make -C windows CROSS_COMPILE=i586-mingw32msvc-

README.md

@@ -5,7 +5,7 @@
 The Micro Python project
 ========================
 <p align="center">
-  <img src="https://raw2.github.com/micropython/micropython/master/logo/upython-with-micro.jpg" alt="MicroPython Logo"/>
+  <img src="https://raw.githubusercontent.com/micropython/micropython/master/logo/upython-with-micro.jpg" alt="MicroPython Logo"/>
 </p>
 
 This is the Micro Python project, which aims to put an implementation
@@ -98,3 +98,18 @@ AUR.  If the above does not work it may be because you don't have the
 correct permissions.  Try then:
 
     $ sudo dfu-util -a 0 -d 0483:df11 -D build-PYBV10/firmware.dfu
+
+Building the documentation locally
+----------------------------------
+
+Install Sphinx, and optionally (for the RTD-styling), sphinx_rtd_theme,
+preferably in a virtualenv:
+
+     pip install sphinx
+     pip install sphinx_rtd_theme
+
+In `micropython/docs`, build the docs:
+
+    make html
+
+You'll find the index page at `micropython/docs/build/html/index.html`.

bare-arm/main.c

@@ -78,6 +78,17 @@ MP_DEFINE_CONST_FUN_OBJ_KW(mp_builtin_open_obj, 1, mp_builtin_open);
 void nlr_jump_fail(void *val) {
 }
 
+void NORETURN __fatal_error(const char *msg) {
+    while (1);
+}
+
+#ifndef NDEBUG
+void MP_WEAK __assert_func(const char *file, int line, const char *func, const char *expr) {
+    printf("Assertion '%s' failed, at file %s:%d\n", expr, file, line);
+    __fatal_error("Assertion failed");
+}
+#endif
+
 /*
 int _lseek() {return 0;}
 int _read() {return 0;}

bare-arm/mpconfigport.h

@@ -12,7 +12,10 @@
 #define MICROPY_HELPER_REPL         (0)
 #define MICROPY_HELPER_LEXER_UNIX   (0)
 #define MICROPY_ENABLE_SOURCE_LINE  (0)
+#define MICROPY_ENABLE_DOC_STRING   (0)
+#define MICROPY_ERROR_REPORTING     (MICROPY_ERROR_REPORTING_TERSE)
 #define MICROPY_PY_BUILTINS_BYTEARRAY (0)
+#define MICROPY_PY_BUILTINS_MEMORYVIEW (0)
 #define MICROPY_PY_BUILTINS_FROZENSET (0)
 #define MICROPY_PY_BUILTINS_SET     (0)
 #define MICROPY_PY_BUILTINS_SLICE   (0)
@@ -30,8 +33,6 @@
 #define MICROPY_LONGINT_IMPL        (MICROPY_LONGINT_IMPL_NONE)
 #define MICROPY_FLOAT_IMPL          (MICROPY_FLOAT_IMPL_NONE)
 
-//#define MICROPY_ERROR_REPORTING     (MICROPY_ERROR_REPORTING_TERSE)
-
 // type definitions for the specific machine
 
 #define BYTES_PER_WORD (4)
@@ -45,6 +46,7 @@ typedef int32_t mp_int_t; // must be pointer size
 typedef uint32_t mp_uint_t; // must be pointer size
 typedef void *machine_ptr_t; // must be of pointer size
 typedef const void *machine_const_ptr_t; // must be of pointer size
+typedef long mp_off_t;
 
 // extra built in names to add to the global namespace
 extern const struct _mp_obj_fun_builtin_t mp_builtin_open_obj;

docs/conf.py

@@ -60,7 +60,7 @@ copyright = '2014, Damien P. George'
 # The short X.Y version.
 version = '1.3'
 # The full version, including alpha/beta/rc tags.
-release = '1.3.1'
+release = '1.3.7'
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
@@ -103,9 +103,19 @@ pygments_style = 'sphinx'
 
 # -- Options for HTML output ----------------------------------------------
 
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-html_theme = 'default'
+# on_rtd is whether we are on readthedocs.org
+on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
+
+if not on_rtd:  # only import and set the theme if we're building docs locally
+    try:
+        import sphinx_rtd_theme
+        html_theme = 'sphinx_rtd_theme'
+        html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), '.']
+    except:
+        html_theme = 'default'
+        html_theme_path = ['.']
+else:
+    html_theme_path = ['.']
 
 # Theme options are theme-specific and customize the look and feel of a theme
 # further.  For a list of options available for each theme, see the
@@ -113,7 +123,7 @@ html_theme = 'default'
 #html_theme_options = {}
 
 # Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
+# html_theme_path = ['.']
 
 # The name for this set of Sphinx documents.  If None, it defaults to
 # "<project> v<release> documentation".
@@ -124,7 +134,7 @@ html_theme = 'default'
 
 # The name of an image file (relative to this directory) to place at the top
 # of the sidebar.
-#html_logo = None
+#html_logo = '../logo/trans-logo.png'
 
 # The name of an image file (within the static path) to use as favicon of the
 # docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
@@ -143,7 +153,7 @@ html_theme = 'default'
 
 # If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
 # using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
+html_last_updated_fmt = '%d %b %Y'
 
 # If true, SmartyPants will be used to convert quotes and dashes to
 # typographically correct entities.
@@ -154,7 +164,7 @@ html_theme = 'default'
 
 # Additional templates that should be rendered to pages, maps page names to
 # template names.
-#html_additional_pages = {}
+html_additional_pages = {"index": "topindex.html"}
 
 # If false, no module index is generated.
 #html_domain_indices = True
@@ -234,7 +244,7 @@ latex_documents = [
 # (source start file, name, description, authors, manual section).
 man_pages = [
     ('index', 'micropython', 'Micro Python Documentation',
-     ['Damien P. George'], 1)
+     ['Damien P. George'], 1),
 ]
 
 # If true, show URL addresses after external links.

docs/contents.rst

@@ -0,0 +1,11 @@
+Micro Python documentation contents
+===================================
+
+.. toctree::
+
+   quickref.rst
+   general.rst
+   tutorial/index.rst
+   library/index.rst
+   hardware/index.rst
+   license.rst

docs/hardware/index.rst

@@ -0,0 +1,20 @@
+The pyboard hardware
+====================
+
+* `PYBv1.0 schematics and layout <http://micropython.org/resources/PYBv10b.pdf>`_ (2.4MiB PDF)
+* `PYBv1.0 metric dimensions <http://micropython.org/resources/PYBv10b-metric-dimensions.pdf>`_ (360KiB PDF)
+* `PYBv1.0 imperial dimensions <http://micropython.org/resources/PYBv10b-imperial-dimensions.pdf>`_ (360KiB PDF)
+
+Datasheets for the components on the pyboard
+============================================
+
+* The microcontroller: `STM32F405RGT6 <http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1577/LN1035/PF252144>`_ (link to manufacturer's site)
+* The accelerometer: `Freescale MMA7660 <http://micropython.org/resources/datasheets/MMA7660FC.pdf>`_ (800kiB PDF)
+* The LDO voltage regulator: `Microchip MCP1802 <http://micropython.org/resources/datasheets/MCP1802-22053C.pdf>`_ (400kiB PDF)
+
+Datasheets for other components
+===============================
+
+* The LCD display on the LCD touch-sensor skin: `Newhaven Display NHD-C12832A1Z-FSW-FBW-3V3 <http://micropython.org/resources/datasheets/NHD-C12832A1Z-FSW-FBW-3V3.pdf>`_ (460KiB PDF)
+* The touch sensor chip on the LCD touch-sensor skin: `Freescale MPR121 <http://micropython.org/resources/datasheets/MPR121.pdf>`_ (280KiB PDF)
+* The digital potentiometer on the audio skin: `Microchip MCP4541 <http://micropython.org/resources/datasheets/MCP4541-22107B.pdf>`_ (2.7MiB PDF)

docs/index.rst

@@ -1,38 +1,15 @@
-.. Micro Python documentation master file
-
 Micro Python documentation and references
 =========================================
 
-Here you can find documentation for Micro Python and the pyboard.
-
-Software
---------
-
 .. toctree::
-   :maxdepth: 2
 
+   quickref.rst
    general.rst
    tutorial/index.rst
-
-.. 
-..  - Reference for the [pyb module](module/pyb/ "pyb module").
-..  - Reference for [all modules](module/ "all modules").
-..  - [Guide for setting up the pyboard on Windows](/static/doc/Micro-Python-Windows-setup.pdf), including DFU programming (PDF).
-
-The pyboard hardware
---------------------
-
-..  - PYBv1.0 [schematics and layout](/static/doc/PYBv10b.pdf "PYBv1.0") (2.4MiB PDF).
-..  - PYBv1.0 [metric dimensions](/static/doc/PYBv10b-metric-dimensions.pdf "metric dimensions") (360KiB PDF).
-..  - PYBv1.0 [imperial dimensions](/static/doc/PYBv10b-imperial-dimensions.pdf "imperial dimensions") (360KiB PDF).
-
-Datasheets for the components on the pyboard
---------------------------------------------
-
-..  - The microcontroller: [STM32F405RGT6](http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1577/LN1035/PF252144) (external link).
-..  - The accelerometer: [Freescale MMA7660](/static/doc/MMA7660FC.pdf) (800kiB PDF).
-..  - The LDO voltage regulator: [Microchip MCP1802](/static/doc/MCP1802-22053C.pdf) (400kiB PDF).
-
+   library/index.rst
+   hardware/index.rst
+   license.rst
+   contents.rst
 
 Indices and tables
 ==================
@@ -40,4 +17,3 @@ Indices and tables
 * :ref:`genindex`
 * :ref:`modindex`
 * :ref:`search`
-

docs/library/cmath.rst

@@ -0,0 +1,58 @@
+:mod:`cmath` -- mathematical functions for complex numbers
+==========================================================
+
+.. module:: cmath
+   :synopsis: mathematical functions for complex numbers
+
+The ``cmath`` module provides some basic mathematical funtions for
+working with complex numbers.
+
+Functions
+---------
+
+.. function:: cos(z)
+
+   Return the cosine of ``z``.
+
+.. function:: exp(z)
+
+   Return the exponential of ``z``.
+
+.. function:: log(z)
+
+   Return the natural logarithm of ``z``.  The branch cut is along the negative real axis.
+
+.. function:: log10(z)
+
+   Return the base-10 logarithm of ``z``.  The branch cut is along the negative real axis.
+
+.. function:: phase(z)
+
+   Returns the phase of the number ``z``, in the range (-pi, +pi].
+
+.. function:: polar(z)
+
+   Returns, as a tuple, the polar form of ``z``.
+
+.. function:: rect(r, phi)
+
+   Returns the complex number with modulus ``r`` and phase ``phi``.
+
+.. function:: sin(z)
+
+   Return the sine of ``z``.
+
+.. function:: sqrt(z)
+
+   Return the square-root of ``z``.
+
+Constants
+---------
+
+.. data:: e
+
+   base of the natural logarithm
+
+.. data:: pi
+
+   the ratio of a circle's circumference to its diameter

docs/library/gc.rst

@@ -0,0 +1,29 @@
+:mod:`gc` -- control the garbage collector
+==========================================
+
+.. module:: gc
+   :synopsis: control the garbage collector
+
+Functions
+---------
+
+.. function:: enable()
+
+   Enable automatic garbage collection.
+
+.. function:: disable()
+
+   Disable automatic garbage collection.  Heap memory can still be allocated,
+   and garbage collection can still be initiated manually using :meth:`gc.collect`.
+
+.. function:: collect()
+
+   Run a garbage collection.
+
+.. function:: mem_alloc()
+
+   Return the number of bytes of heap RAM that are allocated.
+
+.. function:: mem_free()
+
+   Return the number of bytes of available heap RAM.

docs/library/index.rst

@@ -0,0 +1,54 @@
+Micro Python libraries
+======================
+
+Python standard libraries
+-------------------------
+
+The following standard Python libraries are built in to Micro Python.
+
+For additional libraries, please download them from the `micropython-lib repository
+<https://github.com/micropython/micropython-lib>`_.
+
+.. toctree::
+   :maxdepth: 1
+
+   cmath.rst
+   gc.rst
+   math.rst
+   os.rst
+   select.rst
+   struct.rst
+   sys.rst
+   time.rst
+
+Python micro-libraries
+----------------------
+
+The following standard Python libraries have been "micro-ified" to fit in with
+the philosophy of Micro Python.  They provide the core functionality of that
+module and are intended to be a drop-in replacement for the standard Python
+library.
+
+The modules are available by their u-name, and also by their non-u-name.  The
+non-u-name can be overridden by a file of that name in your package path.
+For example, ``import json`` will first search for a file ``json.py`` or
+directory ``json`` and load that package if it is found.  If nothing is found,
+it will fallback to loading the built-in ``ujson`` module.
+
+.. toctree::
+   :maxdepth: 1
+
+   usocket.rst
+   uheapq.rst
+   ujson.rst
+
+Libraries specific to the pyboard
+---------------------------------
+
+The following libraries are specific to the pyboard.
+
+.. toctree::
+   :maxdepth: 2
+
+   pyb.rst
+   network.rst

docs/library/math.rst

@@ -0,0 +1,177 @@
+:mod:`math` -- mathematical functions
+=====================================
+
+.. module:: math
+   :synopsis: mathematical functions
+
+The ``math`` module provides some basic mathematical funtions for
+working with floating-point numbers.
+
+*Note:* On the pyboard, floating-point numbers have 32-bit precision.
+
+Functions
+---------
+
+.. function:: acos(x)
+
+   Return the inverse cosine of ``x``.
+
+.. function:: acosh(x)
+
+   Return the inverse hyperbolic cosine of ``x``.
+
+.. function:: asin(x)
+
+   Return the inverse sine of ``x``.
+
+.. function:: asinh(x)
+
+   Return the inverse hyperbolic sine of ``x``.
+
+.. function:: atan(x)
+
+   Return the inverse tangent of ``x``.
+
+.. function:: atan2(y, x)
+
+   Return the principal value of the inverse tangent of ``y/x``.
+
+.. function:: atanh(x)
+
+   Return the inverse hyperbolic tangent of ``x``.
+
+.. function:: ceil(x)
+
+   Return an integer, being ``x`` rounded towards positive infinity.
+
+.. function:: copysign(x, y)
+
+   Return ``x`` with the sign of ``y``.
+
+.. function:: cos(x)
+
+   Return the cosine of ``x``.
+
+.. function:: cosh(x)
+
+   Return the hyperbolic cosine of ``x``.
+
+.. function:: degrees(x)
+
+   Return radians ``x`` converted to degrees.
+
+.. function:: erf(x)
+
+   Return the error function of ``x``.
+
+.. function:: erfc(x)
+
+   Return the complementary error function of ``x``.
+
+.. function:: exp(x)
+
+   Return the exponential of ``x``.
+
+.. function:: expm1(x)
+
+   Return ``exp(x) - 1``.
+
+.. function:: fabs(x)
+
+   Return the absolute value of ``x``.
+
+.. function:: floor(x)
+
+   Return an integer, being ``x`` rounded towards negative infinity.
+
+.. function:: fmod(x, y)
+
+   Return the remainder of ``x/y``.
+
+.. function:: frexp(x)
+
+   Converts a floating-point number to fractional and integral components.
+
+.. function:: gamma(x)
+
+   Return the gamma function of ``x``.
+
+.. function:: isfinite(x)
+
+   Return ``True`` if ``x`` is finite.
+
+.. function:: isinf(x)
+
+   Return ``True`` if ``x`` is infinite.
+
+.. function:: isnan(x)
+
+   Return ``True`` if ``x`` is not-a-number
+
+.. function:: ldexp(x, exp)
+
+   Return ``x * (2**exp)``.
+
+.. function:: lgamma(x)
+
+   Return the natural logarithm of the gamma function of ``x``.
+
+.. function:: log(x)
+
+   Return the natural logarithm of ``x``.
+
+.. function:: log10(x)
+
+   Return the base-10 logarithm of ``x``.
+
+.. function:: log2(x)
+
+   Return the base-2 logarithm of ``x``.
+
+.. function:: modf(x)
+
+   Return a tuple of two floats, being the fractional and integral parts of
+   ``x``.  Both return values have the same sign as ``x``.
+
+.. function:: pow(x, y)
+
+   Returns ``x`` to the power of ``y``.
+
+.. function:: radians(x)
+
+   Return degrees ``x`` converted to radians.
+
+.. function:: sin(x)
+
+   Return the sine of ``x``.
+
+.. function:: sinh(x)
+
+   Return the hyperbolic sine of ``x``.
+
+.. function:: sqrt(x)
+
+   Return the square root of ``x``.
+
+.. function:: tan(x)
+
+   Return the tangent of ``x``.
+
+.. function:: tanh(x)
+
+   Return the hyperbolic tangent of ``x``.
+
+.. function:: trunc(x)
+
+   Return an integer, being ``x`` rounded towards 0.
+
+Constants
+---------
+
+.. data:: e
+
+   base of the natural logarithm
+
+.. data:: pi
+
+   the ratio of a circle's circumference to its diameter

docs/library/network.rst

@@ -0,0 +1,63 @@
+****************************************
+:mod:`network` --- network configuration
+****************************************
+
+.. module:: network
+   :synopsis: network configuration
+
+This module provides network drivers and routing configuration.
+
+
+class CC3k
+==========
+
+Constructors
+------------
+
+.. class:: CC3k(spi, pin_cs, pin_en, pin_irq)
+
+   Initialise the CC3000 using the given SPI bus and pins and return a CC3k object.
+
+
+Methods
+-------
+
+.. method:: cc3k.connect(ssid, key=None, \*, security=WPA2, bssid=None)
+
+
+class WIZnet5k
+==============
+
+This class allows you to control WIZnet5x00 Ethernet adaptors based on
+the W5200 and W5500 chipsets (only W5200 tested).
+
+Example usage::
+
+    import wiznet5k
+    w = wiznet5k.WIZnet5k()
+    print(w.ipaddr())
+    w.gethostbyname('micropython.org')
+    s = w.socket()
+    s.connect(('192.168.0.2', 8080))
+    s.send('hello')
+    print(s.recv(10))
+
+
+Constructors
+------------
+
+.. class:: WIZnet5k(spi, pin_cs, pin_rst)
+
+   Create and return a WIZnet5k object.
+
+
+Methods
+-------
+
+.. method:: wiznet5k.ipaddr([(ip, subnet, gateway, dns)])
+
+   Get/set IP address, subnet mask, gateway and DNS.
+
+.. method:: wiznet5k.regs()
+
+   Dump WIZnet5k registers.

docs/library/os.rst

@@ -0,0 +1,67 @@
+:mod:`os` -- basic "operating system" services
+==============================================
+
+.. module:: os
+   :synopsis: basic "operating system" services
+
+The ``os`` module contains functions for filesystem access and ``urandom``.
+
+Pyboard specifics
+-----------------
+
+The filesystem on the pyboard has ``/`` as the root directory and the
+available physical drives are accessible from here.  They are currently:
+
+    ``/flash``      -- the internal flash filesystem
+
+    ``/sd``         -- the SD card (if it exists)
+
+On boot up, the current directory is ``/flash`` if no SD card is inserted,
+otherwise it is ``/sd``.
+
+Functions
+---------
+
+.. function:: chdir(path)
+
+   Change current directory.
+
+.. function:: getcwd()
+
+   Get the current directory.
+
+.. function:: listdir([dir])
+
+   With no argument, list the current directory.  Otherwise list the given directory.
+
+.. function:: mkdir(path)
+
+   Create a new directory.
+
+.. function:: remove(path)
+
+   Remove a file.
+
+.. function:: rmdir(path)
+
+   Remove a directory.
+
+.. function:: stat(path)
+
+   Get the status of a file or directory.
+
+.. function:: sync()
+
+   Sync all filesystems.
+
+.. function:: urandom(n)
+
+   Return a bytes object with n random bytes, generated by the hardware
+   random number generator.
+
+Constants
+---------
+
+.. data:: sep
+
+   separation character used in paths

docs/library/pyb.ADC.rst

@@ -0,0 +1,52 @@
+.. _pyb.ADC:
+
+class ADC -- analog to digital conversion: read analog values on a pin
+======================================================================
+
+Usage::
+
+    import pyb
+
+    adc = pyb.ADC(pin)              # create an analog object from a pin
+    val = adc.read()                # read an analog value
+
+    adc = pyb.ADCAll(resolution)    # creale an ADCAll object
+    val = adc.read_channel(channel) # read the given channel
+    val = adc.read_core_temp()      # read MCU temperature
+    val = adc.read_core_vbat()      # read MCU VBAT
+    val = adc.read_core_vref()      # read MCU VREF
+
+
+Constructors
+------------
+
+.. class:: pyb.ADC(pin)
+
+   Create an ADC object associated with the given pin.
+   This allows you to then read analog values on that pin.
+
+
+Methods
+-------
+
+.. method:: adc.read()
+
+   Read the value on the analog pin and return it.  The returned value
+   will be between 0 and 4095.
+
+.. method:: adc.read_timed(buf, freq)
+
+   Read analog values into the given buffer at the given frequency. Buffer
+   can be bytearray or array.array for example. If a buffer with 8-bit elements
+   is used, sample resolution will be reduced to 8 bits.
+   
+   Example::
+   
+       adc = pyb.ADC(pyb.Pin.board.X19)    # create an ADC on pin X19
+       buf = bytearray(100)                # create a buffer of 100 bytes
+       adc.read_timed(buf, 10)             # read analog values into buf at 10Hz
+                                           #   this will take 10 seconds to finish
+       for val in buf:                     # loop over all values
+           print(val)                      # print the value out
+   
+   This function does not allocate any memory.

docs/library/pyb.Accel.rst

@@ -0,0 +1,51 @@
+class Accel -- accelerometer control
+====================================
+
+Accel is an object that controls the accelerometer.  Example usage::
+
+    accel = pyb.Accel()
+    for i in range(10):
+        print(accel.x(), accel.y(), accel.z())
+
+Raw values are between -32 and 31.
+
+
+Constructors
+------------
+
+.. class:: pyb.Accel()
+
+   Create and return an accelerometer object.
+   
+   Note: if you read accelerometer values immediately after creating this object
+   you will get 0.  It takes around 20ms for the first sample to be ready, so,
+   unless you have some other code between creating this object and reading its
+   values, you should put a ``pyb.delay(20)`` after creating it.  For example::
+   
+       accel = pyb.Accel()
+       pyb.delay(20)
+       print(accel.x())
+
+
+Methods
+-------
+
+.. method:: accel.filtered_xyz()
+
+   Get a 3-tuple of filtered x, y and z values.
+
+.. method:: accel.tilt()
+
+   Get the tilt register.
+
+.. method:: accel.x()
+
+   Get the x-axis value.
+
+.. method:: accel.y()
+
+   Get the y-axis value.
+
+.. method:: accel.z()
+
+   Get the z-axis value.

docs/library/pyb.CAN.rst

@@ -0,0 +1,110 @@
+class CAN -- controller area network communication bus
+======================================================
+
+CAN implements the standard CAN communications protocol.  At
+the physical level it consists of 2 lines: RX and TX.  Note that
+to connect the pyboard to a CAN bus you must use a CAN transceiver
+to convert the CAN logic signals from the pyboard to the correct
+voltage levels on the bus.
+
+Note that this driver does not yet support filter configuration
+(it defaults to a single filter that lets through all messages),
+or bus timing configuration (except for setting the prescaler).
+
+Example usage (works without anything connected)::
+
+    from pyb import CAN
+    can = pyb.CAN(1, pyb.CAN.LOOPBACK)
+    can.send('message!', 123)   # send message to id 123
+    can.recv(0)                 # receive message on FIFO 0
+
+
+Constructors
+------------
+
+.. class:: pyb.CAN(bus, ...)
+
+   Construct a CAN object on the given bus.  ``bus`` can be 1-2, or 'YA' or 'YB'.
+   With no additional parameters, the CAN object is created but not
+   initialised (it has the settings from the last initialisation of
+   the bus, if any).  If extra arguments are given, the bus is initialised.
+   See ``init`` for parameters of initialisation.
+   
+   The physical pins of the CAN busses are:
+   
+     - ``CAN(1)`` is on ``YA``: ``(RX, TX) = (Y3, Y4) = (PB8, PB9)``
+     - ``CAN(2)`` is on ``YB``: ``(RX, TX) = (Y5, Y6) = (PB12, PB13)``
+
+
+Methods
+-------
+
+.. method:: can.init(mode, extframe=False, prescaler=100, \*, sjw=1, bs1=6, bs2=8)
+
+   Initialise the CAN bus with the given parameters:
+   
+     - ``mode`` is one of:  NORMAL, LOOPBACK, SILENT, SILENT_LOOPBACK
+     - if ``extframe`` is True then the bus uses extended identifiers in the frames
+       (29 bits); otherwise it uses standard 11 bit identifiers
+     - ``prescaler`` is used to set the duration of 1 time quanta; the time quanta
+       will be the input clock (PCLK1, see :meth:`pyb.freq()`) divided by the prescaler
+     - ``sjw`` is the resynchronisation jump width in units of the time quanta;
+       it can be 1, 2, 3, 4
+     - ``bs1`` defines the location of the sample point in units of the time quanta;
+       it can be between 1 and 1024 inclusive
+     - ``bs2`` defines the location of the transmit point in units of the time quanta;
+       it can be between 1 and 16 inclusive
+
+   The time quanta tq is the basic unit of time for the CAN bus.  tq is the CAN
+   prescaler value divided by PCLK1 (the frequency of internal peripheral bus 1);
+   see :meth:`pyb.freq()` to determine PCLK1.
+
+   A single bit is made up of the synchronisation segment, which is always 1 tq.
+   Then follows bit segment 1, then bit segment 2.  The sample point is after bit
+   segment 1 finishes.  The transmit point is after bit segment 2 finishes.
+   The baud rate will be 1/bittime, where the bittime is 1 + BS1 + BS2 multiplied
+   by the time quanta tq.
+
+   For example, with PCLK1=42MHz, prescaler=100, sjw=1, bs1=6, bs2=8, the value of
+   tq is 2.38 microseconds.  The bittime is 35.7 microseconds, and the baudrate
+   is 28kHz.
+
+   See page 680 of the STM32F405 datasheet for more details.
+
+.. method:: can.deinit()
+
+   Turn off the CAN bus.
+
+.. method:: can.any(fifo)
+
+   Return ``True`` if any message waiting on the FIFO, else ``False``.
+
+.. method:: can.recv(fifo, \*, timeout=5000)
+
+   Receive data on the bus:
+   
+     - ``fifo`` is an integer, which is the FIFO to receive on
+     - ``timeout`` is the timeout in milliseconds to wait for the receive.
+   
+   Return value: buffer of data bytes.
+
+.. method:: can.send(send, addr, \*, timeout=5000)
+
+   Send a message on the bus:
+   
+     - ``send`` is the data to send (an integer to send, or a buffer object).
+     - ``addr`` is the address to send to
+     - ``timeout`` is the timeout in milliseconds to wait for the send.
+   
+   Return value: ``None``.
+
+
+Constants
+---------
+
+.. data:: CAN.NORMAL
+.. data:: CAN.LOOPBACK
+.. data:: CAN.SILENT
+.. data:: CAN.SILENT_LOOPBACK
+
+   the mode of the CAN bus

docs/library/pyb.DAC.rst

@@ -0,0 +1,69 @@
+.. _pyb.DAC:
+
+class DAC -- digital to analog conversion
+=========================================
+
+The DAC is used to output analog values (a specific voltage) on pin X5 or pin X6.
+The voltage will be between 0 and 3.3V.
+
+*This module will undergo changes to the API.*
+
+Example usage::
+
+    from pyb import DAC
+
+    dac = DAC(1)            # create DAC 1 on pin X5
+    dac.write(128)          # write a value to the DAC (makes X5 1.65V)
+
+To output a continuous sine-wave::
+
+    import math
+    from pyb import DAC
+
+    # create a buffer containing a sine-wave
+    buf = bytearray(100)
+    for i in range(len(buf)):
+        buf[i] = 128 + int(127 \* math.sin(2 \* math.pi \* i / len(buf)))
+
+    # output the sine-wave at 400Hz
+    dac = DAC(1)
+    dac.write_timed(buf, 400 \* len(buf), mode=DAC.CIRCULAR)
+
+
+Constructors
+------------
+
+.. class:: pyb.DAC(port)
+
+   Construct a new DAC object.
+   
+   ``port`` can be a pin object, or an integer (1 or 2).
+   DAC(1) is on pin X5 and DAC(2) is on pin X6.
+
+
+Methods
+-------
+
+.. method:: dac.noise(freq)
+
+   Generate a pseudo-random noise signal.  A new random sample is written
+   to the DAC output at the given frequency.
+
+.. method:: dac.triangle(freq)
+
+   Generate a triangle wave.  The value on the DAC output changes at
+   the given frequency, and the frequence of the repeating triangle wave
+   itself is 256 (or 1024, need to check) times smaller.
+
+.. method:: dac.write(value)
+
+   Direct access to the DAC output (8 bit only at the moment).
+
+.. method:: dac.write_timed(data, freq, \*, mode=DAC.NORMAL)
+
+   Initiates a burst of RAM to DAC using a DMA transfer.
+   The input data is treated as an array of bytes (8 bit data).
+   
+   ``mode`` can be ``DAC.NORMAL`` or ``DAC.CIRCULAR``.
+   
+   TIM6 is used to control the frequency of the transfer.

docs/library/pyb.ExtInt.rst

@@ -0,0 +1,113 @@
+.. _pyb.ExtInt:
+
+class ExtInt -- configure I/O pins to interrupt on external events
+==================================================================
+
+There are a total of 22 interrupt lines. 16 of these can come from GPIO pins
+and the remaining 6 are from internal sources.
+
+For lines 0 thru 15, a given line can map to the corresponding line from an
+arbitrary port. So line 0 can map to Px0 where x is A, B, C, ... and
+line 1 can map to Px1 where x is A, B, C, ... ::
+
+    def callback(line):
+        print("line =", line)
+
+Note: ExtInt will automatically configure the gpio line as an input. ::
+
+    extint = pyb.ExtInt(pin, pyb.ExtInt.IRQ_FALLING, pyb.Pin.PULL_UP, callback)
+
+Now every time a falling edge is seen on the X1 pin, the callback will be
+called. Caution: mechanical pushbuttons have "bounce" and pushing or
+releasing a switch will often generate multiple edges.
+See: http://www.eng.utah.edu/~cs5780/debouncing.pdf for a detailed
+explanation, along with various techniques for debouncing.
+
+Trying to register 2 callbacks onto the same pin will throw an exception.
+
+If pin is passed as an integer, then it is assumed to map to one of the
+internal interrupt sources, and must be in the range 16 thru 22.
+
+All other pin objects go through the pin mapper to come up with one of the
+gpio pins. ::
+
+    extint = pyb.ExtInt(pin, mode, pull, callback)
+
+Valid modes are pyb.ExtInt.IRQ_RISING, pyb.ExtInt.IRQ_FALLING,
+pyb.ExtInt.IRQ_RISING_FALLING, pyb.ExtInt.EVT_RISING,
+pyb.ExtInt.EVT_FALLING, and pyb.ExtInt.EVT_RISING_FALLING.
+
+Only the IRQ_xxx modes have been tested. The EVT_xxx modes have
+something to do with sleep mode and the WFE instruction.
+
+Valid pull values are pyb.Pin.PULL_UP, pyb.Pin.PULL_DOWN, pyb.Pin.PULL_NONE.
+
+There is also a C API, so that drivers which require EXTI interrupt lines
+can also use this code. See extint.h for the available functions and
+usrsw.h for an example of using this.
+
+
+Constructors
+------------
+
+.. class:: pyb.ExtInt(pin, mode, pull, callback)
+
+   Create an ExtInt object:
+   
+     - ``pin`` is the pin on which to enable the interrupt (can be a pin object or any valid pin name).
+     - ``mode`` can be one of:
+       - ``ExtInt.IRQ_RISING`` - trigger on a rising edge;
+       - ``ExtInt.IRQ_FALLING`` - trigger on a falling edge;
+       - ``ExtInt.IRQ_RISING_FALLING`` - trigger on a rising or falling edge.
+     - ``pull`` can be one of:
+       - ``pyb.Pin.PULL_NONE`` - no pull up or down resistors;
+       - ``pyb.Pin.PULL_UP`` - enable the pull-up resistor;
+       - ``pyb.Pin.PULL_DOWN`` - enable the pull-down resistor.
+     - ``callback`` is the function to call when the interrupt triggers.  The
+       callback function must accept exactly 1 argument, which is the line that
+       triggered the interrupt.
+
+
+Class methods
+-------------
+
+.. method:: ExtInt.regs()
+
+   Dump the values of the EXTI registers.
+
+
+Methods
+-------
+
+.. method:: extint.disable()
+
+   Disable the interrupt associated with the ExtInt object.
+   This could be useful for debouncing.
+
+.. method:: extint.enable()
+
+   Enable a disabled interrupt.
+
+.. method:: extint.line()
+
+   Return the line number that the pin is mapped to.
+
+.. method:: extint.swint()
+
+   Trigger the callback from software.
+
+
+Constants
+---------
+
+.. data:: ExtInt.IRQ_FALLING
+
+   interrupt on a falling edge
+
+.. data:: ExtInt.IRQ_RISING
+
+   interrupt on a rising edge
+
+.. data:: ExtInt.IRQ_RISING_FALLING
+
+   interrupt on a rising or falling edge

docs/library/pyb.I2C.rst

@@ -0,0 +1,153 @@
+.. _pyb.I2C:
+
+class I2C -- a two-wire serial protocol
+=======================================
+
+I2C is a two-wire protocol for communicating between devices.  At the physical
+level it consists of 2 wires: SCL and SDA, the clock and data lines respectively.
+
+I2C objects are created attached to a specific bus.  They can be initialised
+when created, or initialised later on::
+
+    from pyb import I2C
+
+    i2c = I2C(1)                         # create on bus 1
+    i2c = I2C(1, I2C.MASTER)             # create and init as a master
+    i2c.init(I2C.MASTER, baudrate=20000) # init as a master
+    i2c.init(I2C.SLAVE, addr=0x42)       # init as a slave with given address
+    i2c.deinit()                         # turn off the peripheral
+
+Printing the i2c object gives you information about its configuration.
+
+Basic methods for slave are send and recv::
+
+    i2c.send('abc')      # send 3 bytes
+    i2c.send(0x42)       # send a single byte, given by the number
+    data = i2c.recv(3)   # receive 3 bytes
+
+To receive inplace, first create a bytearray::
+
+    data = bytearray(3)  # create a buffer
+    i2c.recv(data)       # receive 3 bytes, writing them into data
+
+You can specify a timeout (in ms)::
+
+    i2c.send(b'123', timeout=2000)   # timout after 2 seconds
+
+A master must specify the recipient's address::
+
+    i2c.init(I2C.MASTER)
+    i2c.send('123', 0x42)        # send 3 bytes to slave with address 0x42
+    i2c.send(b'456', addr=0x42)  # keyword for address
+
+Master also has other methods::
+
+    i2c.is_ready(0x42)           # check if slave 0x42 is ready
+    i2c.scan()                   # scan for slaves on the bus, returning
+                                 #   a list of valid addresses
+    i2c.mem_read(3, 0x42, 2)     # read 3 bytes from memory of slave 0x42,
+                                 #   starting at address 2 in the slave
+    i2c.mem_write('abc', 0x42, 2, timeout=1000)
+
+
+Constructors
+------------
+
+.. class:: pyb.I2C(bus, ...)
+
+   Construct an I2C object on the given bus.  ``bus`` can be 1 or 2.
+   With no additional parameters, the I2C object is created but not
+   initialised (it has the settings from the last initialisation of
+   the bus, if any).  If extra arguments are given, the bus is initialised.
+   See ``init`` for parameters of initialisation.
+   
+   The physical pins of the I2C busses are:
+   
+     - ``I2C(1)`` is on the X position: ``(SCL, SDA) = (X9, X10) = (PB6, PB7)``
+     - ``I2C(2)`` is on the Y position: ``(SCL, SDA) = (Y9, Y10) = (PB10, PB11)``
+
+
+Methods
+-------
+
+.. method:: i2c.deinit()
+
+   Turn off the I2C bus.
+
+.. method:: i2c.init(mode, \*, addr=0x12, baudrate=400000, gencall=False)
+
+   Initialise the I2C bus with the given parameters:
+   
+     - ``mode`` must be either ``I2C.MASTER`` or ``I2C.SLAVE``
+     - ``addr`` is the 7-bit address (only sensible for a slave)
+     - ``baudrate`` is the SCL clock rate (only sensible for a master)
+     - ``gencall`` is whether to support general call mode
+
+.. method:: i2c.is_ready(addr)
+
+   Check if an I2C device responds to the given address.  Only valid when in master mode.
+
+.. method:: i2c.mem_read(data, addr, memaddr, timeout=5000, addr_size=8)
+
+   Read from the memory of an I2C device:
+   
+     - ``data`` can be an integer (number of bytes to read) or a buffer to read into
+     - ``addr`` is the I2C device address
+     - ``memaddr`` is the memory location within the I2C device
+     - ``timeout`` is the timeout in milliseconds to wait for the read
+     - ``addr_size`` selects width of memaddr: 8 or 16 bits
+   
+   Returns the read data.
+   This is only valid in master mode.
+
+.. method:: i2c.mem_write(data, addr, memaddr, timeout=5000, addr_size=8)
+
+   Write to the memory of an I2C device:
+   
+     - ``data`` can be an integer or a buffer to write from
+     - ``addr`` is the I2C device address
+     - ``memaddr`` is the memory location within the I2C device
+     - ``timeout`` is the timeout in milliseconds to wait for the write
+     - ``addr_size`` selects width of memaddr: 8 or 16 bits
+   
+   Returns ``None``.
+   This is only valid in master mode.
+
+.. method:: i2c.recv(recv, addr=0x00, timeout=5000)
+
+   Receive data on the bus:
+   
+     - ``recv`` can be an integer, which is the number of bytes to receive,
+       or a mutable buffer, which will be filled with received bytes
+     - ``addr`` is the address to receive from (only required in master mode)
+     - ``timeout`` is the timeout in milliseconds to wait for the receive
+   
+   Return value: if ``recv`` is an integer then a new buffer of the bytes received,
+   otherwise the same buffer that was passed in to ``recv``.
+
+.. method:: i2c.scan()
+
+   Scan all I2C addresses from 0x01 to 0x7f and return a list of those that respond.
+   Only valid when in master mode.
+
+.. method:: i2c.send(send, addr=0x00, timeout=5000)
+
+   Send data on the bus:
+   
+     - ``send`` is the data to send (an integer to send, or a buffer object)
+     - ``addr`` is the address to send to (only required in master mode)
+     - ``timeout`` is the timeout in milliseconds to wait for the send
+   
+   Return value: ``None``.
+
+
+Constants
+---------
+
+.. data:: I2C.MASTER
+
+   for initialising the bus to master mode
+
+.. data:: I2C.SLAVE
+
+   for initialising the bus to slave mode

docs/library/pyb.LCD.rst

@@ -0,0 +1,94 @@
+class LCD -- LCD control for the LCD touch-sensor pyskin
+========================================================
+
+The LCD class is used to control the LCD on the LCD touch-sensor pyskin,
+LCD32MKv1.0.  The LCD is a 128x32 pixel monochrome screen, part NHD-C12832A1Z.
+
+The pyskin must be connected in either the X or Y positions, and then
+an LCD object is made using::
+
+    lcd = pyb.LCD('X')      # if pyskin is in the X position
+    lcd = pyb.LCD('Y')      # if pyskin is in the Y position
+
+Then you can use::
+
+    lcd.light(True)                 # turn the backlight on
+    lcd.write('Hello world!\n')     # print text to the screen
+
+This driver implements a double buffer for setting/getting pixels.
+For example, to make a bouncing dot, try::
+
+    x = y = 0
+    dx = dy = 1
+    while True:
+        # update the dot's position
+        x += dx
+        y += dy
+
+        # make the dot bounce of the edges of the screen
+        if x <= 0 or x >= 127: dx = -dx
+        if y <= 0 or y >= 31: dy = -dy
+
+        lcd.fill(0)                 # clear the buffer
+        lcd.pixel(x, y, 1)          # draw the dot
+        lcd.show()                  # show the buffer
+        pyb.delay(50)               # pause for 50ms
+
+
+Constructors
+------------
+
+.. class:: pyb.LCD(skin_position)
+
+   Construct an LCD object in the given skin position.  ``skin_position`` can be 'X' or 'Y', and
+   should match the position where the LCD pyskin is plugged in.
+
+
+Methods
+-------
+
+.. method:: lcd.command(instr_data, buf)
+
+   Send an arbitrary command to the LCD.  Pass 0 for ``instr_data`` to send an
+   instruction, otherwise pass 1 to send data.  ``buf`` is a buffer with the
+   instructions/data to send.
+
+.. method:: lcd.contrast(value)
+
+   Set the contrast of the LCD.  Valid values are between 0 and 47.
+
+.. method:: lcd.fill(colour)
+
+   Fill the screen with the given colour (0 or 1 for white or black).
+   
+   This method writes to the hidden buffer.  Use ``show()`` to show the buffer.
+
+.. method:: lcd.get(x, y)
+
+   Get the pixel at the position ``(x, y)``.  Returns 0 or 1.
+   
+   This method reads from the visible buffer.
+
+.. method:: lcd.light(value)
+
+   Turn the backlight on/off.  True or 1 turns it on, False or 0 turns it off.
+
+.. method:: lcd.pixel(x, y, colour)
+
+   Set the pixel at ``(x, y)`` to the given colour (0 or 1).
+   
+   This method writes to the hidden buffer.  Use ``show()`` to show the buffer.
+
+.. method:: lcd.show()
+
+   Show the hidden buffer on the screen.
+
+.. method:: lcd.text(str, x, y, colour)
+
+   Draw the given text to the position ``(x, y)`` using the given colour (0 or 1).
+   
+   This method writes to the hidden buffer.  Use ``show()`` to show the buffer.
+
+.. method:: lcd.write(str)
+
+   Write the string ``str`` to the screen.  It will appear immediately.

docs/library/pyb.LED.rst

@@ -0,0 +1,38 @@
+.. _pyb.LED:
+
+class LED -- LED object
+=======================
+
+The LED object controls an individual LED (Light Emitting Diode).
+
+
+Constructors
+------------
+
+.. class:: pyb.LED(id)
+
+   Create an LED object associated with the given LED:
+   
+     - ``id`` is the LED number, 1-4.
+
+
+Methods
+-------
+
+.. method:: led.intensity([value])
+
+   Get or set the LED intensity.  Intensity ranges between 0 (off) and 255 (full on).
+   If no argument is given, return the LED intensity.
+   If an argument is given, set the LED intensity and return ``None``.
+
+.. method:: led.off()
+
+   Turn the LED off.
+
+.. method:: led.on()
+
+   Turn the LED on.
+
+.. method:: led.toggle()
+
+   Toggle the LED between on and off.

docs/library/pyb.Pin.rst

@@ -0,0 +1,266 @@
+.. _pyb.Pin:
+
+class Pin -- control I/O pins
+=============================
+
+A pin is the basic object to control I/O pins.  It has methods to set
+the mode of the pin (input, output, etc) and methods to get and set the
+digital logic level.  For analog control of a pin, see the ADC class.
+
+Usage Model:
+
+All Board Pins are predefined as pyb.Pin.board.Name ::
+
+    x1_pin = pyb.Pin.board.X1
+
+    g = pyb.Pin(pyb.Pin.board.X1, pyb.Pin.IN)
+
+CPU pins which correspond to the board pins are available
+as ``pyb.cpu.Name``. For the CPU pins, the names are the port letter
+followed by the pin number. On the PYBv1.0, ``pyb.Pin.board.X1`` and
+``pyb.Pin.cpu.B6`` are the same pin.
+
+You can also use strings::
+
+    g = pyb.Pin('X1', pyb.Pin.OUT_PP)
+
+Users can add their own names::
+
+    MyMapperDict = { 'LeftMotorDir' : pyb.Pin.cpu.C12 }
+    pyb.Pin.dict(MyMapperDict)
+    g = pyb.Pin("LeftMotorDir", pyb.Pin.OUT_OD)
+
+and can query mappings ::
+
+    pin = pyb.Pin("LeftMotorDir")
+
+Users can also add their own mapping function::
+
+    def MyMapper(pin_name):
+       if pin_name == "LeftMotorDir":
+           return pyb.Pin.cpu.A0
+
+    pyb.Pin.mapper(MyMapper)
+
+So, if you were to call: ``pyb.Pin("LeftMotorDir", pyb.Pin.OUT_PP)``
+then ``"LeftMotorDir"`` is passed directly to the mapper function.
+
+To summarise, the following order determines how things get mapped into
+an ordinal pin number:
+
+1. Directly specify a pin object
+2. User supplied mapping function
+3. User supplied mapping (object must be usable as a dictionary key)
+4. Supply a string which matches a board pin
+5. Supply a string which matches a CPU port/pin
+
+You can set ``pyb.Pin.debug(True)`` to get some debug information about
+how a particular object gets mapped to a pin.
+
+When a pin has the ``Pin.PULL_UP`` or ``Pin.PULL_DOWN`` pull-mode enabled,
+that pin has an effective 40k Ohm resistor pulling it to 3V3 or GND
+respectively (except pin Y5 which has 11k Ohm resistors).
+
+Constructors
+------------
+
+.. class:: pyb.Pin(id, ...)
+
+   Create a new Pin object associated with the id.  If additional arguments are given,
+   they are used to initialise the pin.  See :meth:`pin.init`.
+
+
+Class methods
+-------------
+
+.. method:: Pin.af_list()
+
+   Returns an array of alternate functions available for this pin.
+
+.. method:: Pin.debug([state])
+
+   Get or set the debugging state (``True`` or ``False`` for on or off).
+
+.. method:: Pin.dict([dict])
+
+   Get or set the pin mapper dictionary.
+
+.. method:: Pin.mapper([fun])
+
+   Get or set the pin mapper function.
+
+
+Methods
+-------
+
+.. method:: pin.init(mode, pull=Pin.PULL_NONE, af=-1)
+
+   Initialise the pin:
+   
+     - ``mode`` can be one of:
+       - ``Pin.IN`` - configure the pin for input;
+       - ``Pin.OUT_PP`` - configure the pin for output, with push-pull control;
+       - ``Pin.OUT_OD`` - configure the pin for output, with open-drain control;
+       - ``Pin.AF_PP`` - configure the pin for alternate function, pull-pull;
+       - ``Pin.AF_OD`` - configure the pin for alternate function, open-drain;
+       - ``Pin.ANALOG`` - configure the pin for analog.
+     - ``pull`` can be one of:
+       - ``Pin.PULL_NONE`` - no pull up or down resistors;
+       - ``Pin.PULL_UP`` - enable the pull-up resistor;
+       - ``Pin.PULL_DOWN`` - enable the pull-down resistor.
+     - when mode is Pin.AF_PP or Pin.AF_OD, then af can be the index or name
+       of one of the alternate functions associated with a pin.
+   
+   Returns: ``None``.
+
+.. method:: pin.high()
+
+   Set the pin to a high logic level.
+
+.. method:: pin.low()
+
+   Set the pin to a low logic level.
+
+.. method:: pin.value([value])
+
+   Get or set the digital logic level of the pin:
+
+     - With no argument, return 0 or 1 depending on the logic level of the pin.
+     - With ``value`` given, set the logic level of the pin.  ``value`` can be
+       anything that converts to a boolean.  If it converts to ``True``, the pin
+       is set high, otherwise it is set low.
+
+.. method:: pin.__str__()
+
+   Return a string describing the pin object.
+
+.. method:: pin.af()
+
+   Returns the currently configured alternate-function of the pin. The
+   integer returned will match one of the allowed constants for the af
+   argument to the init function.
+
+.. method:: pin.gpio()
+
+   Returns the base address of the GPIO block associated with this pin.
+
+.. method:: pin.mode()
+
+   Returns the currently configured mode of the pin. The integer returned
+   will match one of the allowed constants for the mode argument to the init
+   function.
+
+.. method:: pin.name()
+
+   Get the pin name.
+
+.. method:: pin.names()
+
+   Returns the cpu and board names for this pin.
+
+.. method:: pin.pin()
+
+   Get the pin number.
+
+.. method:: pin.port()
+
+   Get the pin port.
+
+.. method:: pin.pull()
+
+   Returns the currently configured pull of the pin. The integer returned
+   will match one of the allowed constants for the pull argument to the init
+   function.
+
+
+Constants
+---------
+
+.. data:: Pin.AF_OD
+
+   initialise the pin to alternate-function mode with an open-drain drive
+
+.. data:: Pin.AF_PP
+
+   initialise the pin to alternate-function mode with a push-pull drive
+
+.. data:: Pin.ANALOG
+
+   initialise the pin to analog mode
+
+.. data:: Pin.IN
+
+   initialise the pin to input mode
+
+.. data:: Pin.OUT_OD
+
+   initialise the pin to output mode with an open-drain drive
+
+.. data:: Pin.OUT_PP
+
+   initialise the pin to output mode with a push-pull drive
+
+.. data:: Pin.PULL_DOWN
+
+   enable the pull-down resistor on the pin
+
+.. data:: Pin.PULL_NONE
+
+   don't enable any pull up or down resistors on the pin
+
+.. data:: Pin.PULL_UP
+
+   enable the pull-up resistor on the pin
+
+
+class PinAF -- Pin Alternate Functions
+======================================
+
+A Pin represents a physical pin on the microcprocessor. Each pin
+can have a variety of functions (GPIO, I2C SDA, etc). Each PinAF
+object represents a particular function for a pin.
+
+Usage Model::
+
+    x3 = pyb.Pin.board.X3
+    x3_af = x3.af_list()
+
+x3_af will now contain an array of PinAF objects which are availble on
+pin X3.
+
+For the pyboard, x3_af would contain:
+    [Pin.AF1_TIM2, Pin.AF2_TIM5, Pin.AF3_TIM9, Pin.AF7_USART2]
+
+Normally, each peripheral would configure the af automatically, but sometimes
+the same function is available on multiple pins, and having more control
+is desired.
+
+To configure X3 to expose TIM2_CH3, you could use::
+
+   pin = pyb.Pin(pyb.Pin.board.X3, mode=pyb.Pin.AF_PP, af=pyb.Pin.AF1_TIM2)
+
+or::
+
+   pin = pyb.Pin(pyb.Pin.board.X3, mode=pyb.Pin.AF_PP, af=1)
+
+
+Methods
+-------
+
+.. method:: pinaf.__str__()
+
+   Return a string describing the alternate function.
+
+.. method:: pinaf.index()
+
+   Return the alternate function index.
+
+.. method:: pinaf.name()
+
+   Return the name of the alternate function.
+
+.. method:: pinaf.reg()
+
+   Return the base register associated with the peripheral assigned to this
+   alternate function. For example, if the alternate function were TIM2_CH3
+   this would return stm.TIM2

docs/library/pyb.RTC.rst

@@ -0,0 +1,48 @@
+class RTC -- real time clock
+============================
+
+The RTC is and independent clock that keeps track of the date
+and time.
+
+Example usage::
+
+    rtc = pyb.RTC()
+    rtc.datetime((2014, 5, 1, 4, 13, 0, 0, 0))
+    print(rtc.datetime())
+
+
+Constructors
+------------
+
+.. class:: pyb.RTC()
+
+   Create an RTC object.
+
+
+Methods
+-------
+
+.. method:: rtc.datetime([datetimetuple])
+
+   Get or set the date and time of the RTC.
+   
+   With no arguments, this method returns an 8-tuple with the current
+   date and time.  With 1 argument (being an 8-tuple) it sets the date
+   and time.
+   
+   The 8-tuple has the following format:
+   
+       (year, month, day, weekday, hours, minutes, seconds, subseconds)
+   
+   ``weekday`` is 1-7 for Monday through Sunday.
+   
+   ``subseconds`` counts down from 255 to 0
+
+.. method:: rtc.info()
+
+   Get information about the startup time and reset source.
+   
+    - The lower 0xffff are the number of milliseconds the RTC took to
+      start up.
+    - Bit 0x10000 is set if a power-on reset occurred.
+    - Bit 0x20000 is set if an external reset occurred

docs/library/pyb.SPI.rst

@@ -0,0 +1,106 @@
+.. _pyb.SPI:
+
+class SPI -- a master-driven serial protocol
+============================================
+
+SPI is a serial protocol that is driven by a master.  At the physical level
+there are 3 lines: SCK, MOSI, MISO.
+
+See usage model of I2C; SPI is very similar.  Main difference is
+parameters to init the SPI bus::
+
+    from pyb import SPI
+    spi = SPI(1, SPI.MASTER, baudrate=600000, polarity=1, phase=0, crc=0x7)
+
+Only required parameter is mode, SPI.MASTER or SPI.SLAVE.  Polarity can be
+0 or 1, and is the level the idle clock line sits at.  Phase can be 0 or 1
+to sample data on the first or second clock edge respectively.  Crc can be
+None for no CRC, or a polynomial specifier.
+
+Additional method for SPI::
+
+    data = spi.send_recv(b'1234')        # send 4 bytes and receive 4 bytes
+    buf = bytearray(4)
+    spi.send_recv(b'1234', buf)          # send 4 bytes and receive 4 into buf
+    spi.send_recv(buf, buf)              # send/recv 4 bytes from/to buf
+
+
+Constructors
+------------
+
+.. class:: pyb.SPI(bus, ...)
+
+   Construct an SPI object on the given bus.  ``bus`` can be 1 or 2.
+   With no additional parameters, the SPI object is created but not
+   initialised (it has the settings from the last initialisation of
+   the bus, if any).  If extra arguments are given, the bus is initialised.
+   See ``init`` for parameters of initialisation.
+   
+   The physical pins of the SPI busses are:
+   
+     - ``SPI(1)`` is on the X position: ``(NSS, SCK, MISO, MOSI) = (X5, X6, X7, X8) = (PA4, PA5, PA6, PA7)``
+     - ``SPI(2)`` is on the Y position: ``(NSS, SCK, MISO, MOSI) = (Y5, Y6, Y7, Y8) = (PB12, PB13, PB14, PB15)``
+   
+   At the moment, the NSS pin is not used by the SPI driver and is free
+   for other use.
+
+
+Methods
+-------
+
+.. method:: spi.deinit()
+
+   Turn off the SPI bus.
+
+.. method:: spi.init(mode, baudrate=328125, \*, polarity=1, phase=0, bits=8, firstbit=SPI.MSB, ti=False, crc=None)
+
+   Initialise the SPI bus with the given parameters:
+   
+     - ``mode`` must be either ``SPI.MASTER`` or ``SPI.SLAVE``.
+     - ``baudrate`` is the SCK clock rate (only sensible for a master).
+
+.. method:: spi.recv(recv, \*, timeout=5000)
+
+   Receive data on the bus:
+   
+     - ``recv`` can be an integer, which is the number of bytes to receive,
+       or a mutable buffer, which will be filled with received bytes.
+     - ``timeout`` is the timeout in milliseconds to wait for the receive.
+   
+   Return value: if ``recv`` is an integer then a new buffer of the bytes received,
+   otherwise the same buffer that was passed in to ``recv``.
+
+.. method:: spi.send(send, \*, timeout=5000)
+
+   Send data on the bus:
+   
+     - ``send`` is the data to send (an integer to send, or a buffer object).
+     - ``timeout`` is the timeout in milliseconds to wait for the send.
+   
+   Return value: ``None``.
+
+.. method:: spi.send_recv(send, recv=None, \*, timeout=5000)
+
+   Send and receive data on the bus at the same time:
+   
+     - ``send`` is the data to send (an integer to send, or a buffer object).
+     - ``recv`` is a mutable buffer which will be filled with received bytes.
+       It can be the same as ``send``, or omitted.  If omitted, a new buffer will
+       be created.
+     - ``timeout`` is the timeout in milliseconds to wait for the receive.
+   
+   Return value: the buffer with the received bytes.
+
+
+Constants
+---------
+
+.. data:: SPI.MASTER
+.. data:: SPI.SLAVE
+
+   for initialising the SPI bus to master or slave mode
+
+.. data:: SPI.LSB
+.. data:: SPI.MSB
+
+   set the first bit to be the least or most significant bit

docs/library/pyb.Servo.rst

@@ -0,0 +1,38 @@
+class Servo -- 3-wire hobby servo driver
+========================================
+
+Servo controls standard hobby servos with 3-wires (ground, power, signal).
+
+
+Constructors
+------------
+
+.. class:: pyb.Servo(id)
+
+   Create a servo object.  ``id`` is 1-4.
+
+
+Methods
+-------
+
+.. method:: servo.angle([angle, time=0])
+
+   Get or set the angle of the servo.
+   
+     - ``angle`` is the angle to move to in degrees.
+     - ``time`` is the number of milliseconds to take to get to the specified angle.
+
+.. method:: servo.calibration([pulse_min, pulse_max, pulse_centre, [pulse_angle_90, pulse_speed_100]])
+
+   Get or set the calibration of the servo timing.
+
+.. method:: servo.pulse_width([value])
+
+   Get or set the pulse width in milliseconds.
+
+.. method:: servo.speed([speed, time=0])
+
+   Get or set the speed of a continuous rotation servo.
+   
+     - ``speed`` is the speed to move to change to, between -100 and 100.
+     - ``time`` is the number of milliseconds to take to get to the specified speed.

docs/library/pyb.Switch.rst

@@ -0,0 +1,37 @@
+class Switch -- switch object
+=============================
+
+A Switch object is used to control a push-button switch.
+
+Usage::
+
+     sw = pyb.Switch()       # create a switch object
+     sw()                    # get state (True if pressed, False otherwise)
+     sw.callback(f)          # register a callback to be called when the
+                             #   switch is pressed down
+     sw.callback(None)       # remove the callback
+
+Example::
+
+     pyb.Switch().callback(lambda: pyb.LED(1).toggle())
+
+
+Constructors
+------------
+
+.. class:: pyb.Switch()
+
+   Create and return a switch object.
+
+
+Methods
+-------
+
+.. method:: switch()
+
+   Return the switch state: ``True`` if pressed down, ``False`` otherwise.
+
+.. method:: switch.callback(fun)
+
+   Register the given function to be called when the switch is pressed down.
+   If ``fun`` is ``None``, then it disables the callback.

docs/library/pyb.Timer.rst

@@ -0,0 +1,234 @@
+.. _pyb.Timer:
+
+class Timer -- control internal timers
+======================================
+
+Timers can be used for a great variety of tasks.  At the moment, only
+the simplest case is implemented: that of calling a function periodically.
+
+Each timer consists of a counter that counts up at a certain rate.  The rate
+at which it counts is the peripheral clock frequency (in Hz) divided by the
+timer prescaler.  When the counter reaches the timer period it triggers an
+event, and the counter resets back to zero.  By using the callback method,
+the timer event can call a Python function.
+
+Example usage to toggle an LED at a fixed frequency::
+
+    tim = pyb.Timer(4)              # create a timer object using timer 4
+    tim.init(freq=2)                # trigger at 2Hz
+    tim.callback(lambda t:pyb.LED(1).toggle())
+
+Further examples::
+
+    tim = pyb.Timer(4, freq=100)    # freq in Hz
+    tim = pyb.Timer(4, prescaler=0, period=99)
+    tim.counter()                   # get counter (can also set)
+    tim.prescaler(2)                # set prescaler (can also get)
+    tim.period(199)                 # set period (can also get)
+    tim.callback(lambda t: ...)     # set callback for update interrupt (t=tim instance)
+    tim.callback(None)              # clear callback
+
+*Note:* Timer 3 is reserved for internal use.  Timer 5 controls
+the servo driver, and Timer 6 is used for timed ADC/DAC reading/writing.
+It is recommended to use the other timers in your programs.
+
+
+Constructors
+------------
+
+.. class:: pyb.Timer(id, ...)
+
+   Construct a new timer object of the given id.  If additional
+   arguments are given, then the timer is initialised by ``init(...)``.
+   ``id`` can be 1 to 14, excluding 3.
+
+
+Methods
+-------
+
+.. method:: timer.callback(fun)
+
+   Set the function to be called when the timer triggers.
+   ``fun`` is passed 1 argument, the timer object.
+   If ``fun`` is ``None`` then the callback will be disabled.
+
+.. method:: timer.channel(channel, mode, ...)
+
+   If only a channel number is passed, then a previously initialized channel
+   object is returned (or ``None`` if there is no previous channel).
+   
+   Othwerwise, a TimerChannel object is initialized and returned.
+   
+   Each channel can be configured to perform pwm, output compare, or
+   input capture. All channels share the same underlying timer, which means
+   that they share the same timer clock.
+   
+   Keyword arguments:
+   
+     - ``mode`` can be one of:
+
+       - ``Timer.PWM`` --- configure the timer in PWM mode (active high).
+       - ``Timer.PWM_INVERTED`` --- configure the timer in PWM mode (active low).
+       - ``Timer.OC_TIMING`` --- indicates that no pin is driven.
+       - ``Timer.OC_ACTIVE`` --- the pin will be made active when a compare match occurs (active is determined by polarity)
+       - ``Timer.OC_INACTIVE`` --- the pin will be made inactive when a compare match occurs.
+       - ``Timer.OC_TOGGLE`` --- the pin will be toggled when an compare match occurs.
+       - ``Timer.OC_FORCED_ACTIVE`` --- the pin is forced active (compare match is ignored).
+       - ``Timer.OC_FORCED_INACTIVE`` --- the pin is forced inactive (compare match is ignored).
+       - ``Timer.IC`` --- configure the timer in Input Capture mode.
+   
+     - ``callback`` - as per TimerChannel.callback()
+   
+     - ``pin`` None (the default) or a Pin object. If specified (and not None)
+       this will cause the alternate function of the the indicated pin
+       to be configured for this timer channel. An error will be raised if
+       the pin doesn't support any alternate functions for this timer channel.
+   
+   Keyword arguments for Timer.PWM modes:
+   
+     - ``pulse_width`` - determines the initial pulse width value to use.
+     - ``pulse_width_percent`` - determines the initial pulse width percentage to use.
+   
+   Keyword arguments for Timer.OC modes:
+   
+     - ``compare`` - determines the initial value of the compare register.
+   
+     - ``polarity`` can be one of:
+       - ``Timer.HIGH`` - output is active high
+       - ``Timer.LOW`` - output is acive low
+   
+   Optional keyword arguments for Timer.IC modes:
+   
+     - ``polarity`` can be one of:
+       - ``Timer.RISING`` - captures on rising edge.
+       - ``Timer.FALLING`` - captures on falling edge.
+       - ``Timer.BOTH`` - captures on both edges.
+   
+     Note that capture only works on the primary channel, and not on the
+     complimentary channels.
+   
+   PWM Example::
+   
+       timer = pyb.Timer(2, freq=1000)
+       ch2 = timer.channel(2, pyb.Timer.PWM, pin=pyb.Pin.board.X2, pulse_width=210000)
+       ch3 = timer.channel(3, pyb.Timer.PWM, pin=pyb.Pin.board.X3, pulse_width=420000)
+
+.. method:: timer.counter([value])
+
+   Get or set the timer counter.
+
+.. method:: timer.deinit()
+
+   Deinitialises the timer.
+   
+   Disables the callback (and the associated irq).
+   Disables any channel callbacks (and the associated irq).
+   Stops the timer, and disables the timer peripheral.
+
+.. method:: timer.freq([value])
+
+   Get or set the frequency for the timer (changes prescaler and period if set).
+
+.. method:: timer.init(\*, freq, prescaler, period)
+
+   Initialise the timer.  Initialisation must be either by frequency (in Hz)
+   or by prescaler and period::
+   
+       tim.init(freq=100)                  # set the timer to trigger at 100Hz
+       tim.init(prescaler=83, period=999)  # set the prescaler and period directly
+   
+   Keyword arguments:
+   
+     - ``freq`` --- specifies the periodic frequency of the timer. You migh also
+       view this as the frequency with which the timer goes through one complete cycle.
+   
+     - ``prescaler`` [0-0xffff] - specifies the value to be loaded into the
+       timer's Prescaler Register (PSC). The timer clock source is divided by
+       (``prescaler + 1``) to arrive at the timer clock. Timers 2-7 and 12-14
+       have a clock source of 84 MHz (pyb.freq()[2] \* 2), and Timers 1, and 8-11
+       have a clock source of 168 MHz (pyb.freq()[3] \* 2).
+   
+     - ``period`` [0-0xffff] for timers 1, 3, 4, and 6-15. [0-0x3fffffff] for timers 2 & 5.
+       Specifies the value to be loaded into the timer's AutoReload
+       Register (ARR). This determines the period of the timer (i.e. when the
+       counter cycles). The timer counter will roll-over after ``period + 1``
+       timer clock cycles.
+   
+     - ``mode`` can be one of:
+
+       - ``Timer.UP`` - configures the timer to count from 0 to ARR (default)
+       - ``Timer.DOWN`` - configures the timer to count from ARR down to 0.
+       - ``Timer.CENTER`` - confgures the timer to count from 0 to ARR and
+         then back down to 0.
+   
+     - ``div`` can be one of 1, 2, or 4. Divides the timer clock to determine
+       the sampling clock used by the digital filters.
+   
+     - ``callback`` - as per Timer.callback()
+   
+     - ``deadtime`` - specifies the amount of "dead" or inactive time between
+       transitions on complimentary channels (both channels will be inactive)
+       for this time). ``deadtime`` may be an integer between 0 and 1008, with
+       the following restrictions: 0-128 in steps of 1. 128-256 in steps of
+       2, 256-512 in steps of 8, and 512-1008 in steps of 16. ``deadime``
+       measures ticks of ``source_freq`` divided by ``div`` clock ticks.
+       ``deadtime`` is only available on timers 1 and 8.
+   
+    You must either specify freq or both of period and prescaler.
+
+.. method:: timer.period([value])
+
+   Get or set the period of the timer.
+
+.. method:: timer.prescaler([value])
+
+   Get or set the prescaler for the timer.
+
+.. method:: timer.source_freq()
+
+   Get the frequency of the source of the timer.
+
+class TimerChannel --- setup a channel for a timer
+==================================================
+
+Timer channels are used to generate/capture a signal using a timer.
+
+TimerChannel objects are created using the Timer.channel() method.
+
+Methods
+-------
+
+.. method:: timerchannel.callback(fun)
+
+   Set the function to be called when the timer channel triggers.
+   ``fun`` is passed 1 argument, the timer object.
+   If ``fun`` is ``None`` then the callback will be disabled.
+
+.. method:: timerchannel.capture([value])
+
+   Get or set the capture value associated with a channel.
+   capture, compare, and pulse_width are all aliases for the same function.
+   capture is the logical name to use when the channel is in input capture mode.
+
+.. method:: timerchannel.compare([value])
+
+   Get or set the compare value associated with a channel.
+   capture, compare, and pulse_width are all aliases for the same function.
+   compare is the logical name to use when the channel is in output compare mode.
+
+.. method:: timerchannel.pulse_width([value])
+
+   Get or set the pulse width value associated with a channel.
+   capture, compare, and pulse_width are all aliases for the same function.
+   pulse_width is the logical name to use when the channel is in PWM mode.
+   
+   In edge aligned mode, a pulse_width of ``period + 1`` corresponds to a duty cycle of 100%
+   In center aligned mode, a pulse width of ``period`` corresponds to a duty cycle of 100%
+
+.. method:: timerchannel.pulse_width_percent([value])
+
+   Get or set the pulse width percentage associated with a channel.  The value
+   is a number between 0 and 100 and sets the percentage of the timer period
+   for which the pulse is active.  The value can be an integer or
+   floating-point number for more accuracy.  For example, a value of 25 gives
+   a duty cycle of 25%.

docs/library/pyb.UART.rst

@@ -0,0 +1,136 @@
+.. _pyb.UART:
+
+class UART -- duplex serial communication bus
+=============================================
+
+UART implements the standard UART/USART duplex serial communications protocol.  At
+the physical level it consists of 2 lines: RX and TX.  The unit of communication
+is a character (not to be confused with a string character) which can be 8 or 9
+bits wide.
+
+UART objects can be created and initialised using::
+
+    from pyb import UART
+
+    uart = UART(1, 9600)                         # init with given baudrate
+    uart.init(9600, bits=8, parity=None, stop=1) # init with given parameters
+
+Bits can be 7, 8 or 9.  Parity can be None, 0 (even) or 1 (odd).  Stop can be 1 or 2.
+
+*Note:* with parity=None, only 8 and 9 bits are supported.  With parity enabled,
+only 7 and 8 bits are supported.
+
+A UART object acts like a stream object and reading and writing is done
+using the standard stream methods::
+
+    uart.read(10)       # read 10 characters, returns a bytes object
+    uart.readall()      # read all available characters
+    uart.readline()     # read a line
+    uart.readinto(buf)  # read and store into the given buffer
+    uart.write('abc')   # write the 3 characters
+
+Individual characters can be read/written using::
+
+    uart.readchar()     # read 1 character and returns it as an integer
+    uart.writechar(42)  # write 1 character
+
+To check if there is anything to be read, use::
+
+    uart.any()               # returns True if any characters waiting
+
+*Note:* The stream functions ``read``, ``write`` etc Are new in Micro Python since v1.3.4.
+Earlier versions use ``uart.send`` and ``uart.recv``.
+
+Constructors
+------------
+
+.. class:: pyb.UART(bus, ...)
+
+   Construct a UART object on the given bus.  ``bus`` can be 1-6, or 'XA', 'XB', 'YA', or 'YB'.
+   With no additional parameters, the UART object is created but not
+   initialised (it has the settings from the last initialisation of
+   the bus, if any).  If extra arguments are given, the bus is initialised.
+   See ``init`` for parameters of initialisation.
+
+   The physical pins of the UART busses are:
+
+     - ``UART(4)`` is on ``XA``: ``(TX, RX) = (X1, X2) = (PA0, PA1)``
+     - ``UART(1)`` is on ``XB``: ``(TX, RX) = (X9, X10) = (PB6, PB7)``
+     - ``UART(6)`` is on ``YA``: ``(TX, RX) = (Y1, Y2) = (PC6, PC7)``
+     - ``UART(3)`` is on ``YB``: ``(TX, RX) = (Y9, Y10) = (PB10, PB11)``
+     - ``UART(2)`` is on: ``(TX, RX) = (X3, X4) = (PA2, PA3)``
+
+Methods
+-------
+
+.. method:: uart.init(baudrate, bits=8, parity=None, stop=1, \*, timeout=1000, timeout_char=0, read_buf_len=64)
+
+   Initialise the UART bus with the given parameters:
+
+     - ``baudrate`` is the clock rate.
+     - ``bits`` is the number of bits per character, 7, 8 or 9.
+     - ``parity`` is the parity, ``None``, 0 (even) or 1 (odd).
+     - ``stop`` is the number of stop bits, 1 or 2.
+     - ``timeout`` is the timeout in milliseconds to wait for the first character.
+     - ``timeout_char`` is the timeout in milliseconds to wait between characters.
+     - ``read_buf_len`` is the character length of the read buffer (0 to disable).
+
+   *Note:* with parity=None, only 8 and 9 bits are supported.  With parity enabled,
+   only 7 and 8 bits are supported.
+
+.. method:: uart.deinit()
+
+   Turn off the UART bus.
+
+.. method:: uart.any()
+
+   Return ``True`` if any characters waiting, else ``False``.
+
+.. method:: uart.read([nbytes])
+
+   Read characters.  If ``nbytes`` is specified then read at most that many bytes.
+
+   *Note:* for 9 bit characters each character takes two bytes, ``nbytes`` must
+   be even, and the number of characters is ``nbytes/2``.
+
+   Return value: a bytes object containing the bytes read in.  Returns ``b''``
+   on timeout.
+
+.. method:: uart.readall()
+
+   Read as much data as possible.
+
+   Return value: a bytes object.
+
+.. method:: uart.readchar()
+
+   Receive a single character on the bus.
+
+   Return value: The character read, as an integer.  Returns -1 on timeout.
+
+.. method:: uart.readinto(buf[, nbytes])
+
+   Read bytes into the ``buf``.  If ``nbytes`` is specified then read at most
+   that many bytes.  Otherwise, read at most ``len(buf)`` bytes.
+
+   Return value: number of bytes read and stored into ``buf``.
+
+.. method:: uart.readline()
+
+   Read a line, ending in a newline character.
+
+   Return value: the line read.
+
+.. method:: uart.write(buf)
+
+   Write the buffer of bytes to the bus.  If characters are 7 or 8 bits wide
+   then each byte is one character.  If characters are 9 bits wide then two
+   bytes are used for each character (little endian), and ``buf`` must contain
+   an even number of bytes.
+
+   Return value: number of bytes written.
+
+.. method:: uart.writechar(char)
+
+   Write a single character on the bus.  ``char`` is an integer to write.
+   Return value: ``None``.

docs/library/pyb.USB_VCP.rst

@@ -0,0 +1,57 @@
+class USB_VCP -- USB virtual comm port
+======================================
+
+The USB_VCP class allows creation of an object representing the USB
+virtual comm port.  It can be used to read and write data over USB to
+the connected host.
+
+
+Constructors
+------------
+
+.. class:: pyb.USB_VCP()
+
+   Create a new USB_VCP object.
+
+
+Methods
+-------
+
+.. method:: usb_vcp.any()
+
+   Return ``True`` if any characters waiting, else ``False``.
+
+.. method:: usb_vcp.close()
+
+
+.. method:: usb_vcp.read([nbytes])
+
+
+.. method:: usb_vcp.readall()
+
+
+.. method:: usb_vcp.readline()
+
+
+.. method:: usb_vcp.recv(data, \*, timeout=5000)
+
+   Receive data on the bus:
+   
+     - ``data`` can be an integer, which is the number of bytes to receive,
+       or a mutable buffer, which will be filled with received bytes.
+     - ``timeout`` is the timeout in milliseconds to wait for the receive.
+   
+   Return value: if ``data`` is an integer then a new buffer of the bytes received,
+   otherwise the number of bytes read into ``data`` is returned.
+
+.. method:: usb_vcp.send(data, \*, timeout=5000)
+
+   Send data over the USB VCP:
+   
+     - ``data`` is the data to send (an integer to send, or a buffer object).
+     - ``timeout`` is the timeout in milliseconds to wait for the send.
+   
+   Return value: number of bytes sent.
+
+.. method:: usb_vcp.write(buf)
+

docs/library/pyb.rst

@@ -0,0 +1,182 @@
+:mod:`pyb` --- functions related to the pyboard
+===============================================
+
+.. module:: pyb
+   :synopsis: functions related to the pyboard
+
+The ``pyb`` module contains specific functions related to the pyboard.
+
+Time related functions
+----------------------
+
+.. function:: delay(ms)
+
+   Delay for the given number of milliseconds.
+
+.. function:: udelay(us)
+
+   Delay for the given number of microseconds.
+
+.. function:: millis()
+
+   Returns the number of milliseconds since the board was last reset.
+   
+   The result is always a micropython smallint (31-bit signed number), so
+   after 2^30 milliseconds (about 12.4 days) this will start to return
+   negative numbers.
+
+.. function:: micros()
+
+   Returns the number of microseconds since the board was last reset.
+   
+   The result is always a micropython smallint (31-bit signed number), so
+   after 2^30 microseconds (about 17.8 minutes) this will start to return
+   negative numbers.
+
+.. function:: elapsed_millis(start)
+
+   Returns the number of milliseconds which have elapsed since ``start``.
+   
+   This function takes care of counter wrap, and always returns a positive
+   number. This means it can be used to measure periods upto about 12.4 days.
+   
+   Example::
+
+       start = pyb.millis()
+       while pyb.elapsed_millis(start) < 1000:
+           # Perform some operation
+
+.. function:: elapsed_micros(start)
+
+   Returns the number of microseconds which have elapsed since ``start``.
+   
+   This function takes care of counter wrap, and always returns a positive
+   number. This means it can be used to measure periods upto about 17.8 minutes.
+   
+   Example::
+
+       start = pyb.micros()
+       while pyb.elapsed_micros(start) < 1000:
+           # Perform some operation
+           pass
+
+Reset related functions
+-----------------------
+
+.. function:: hard_reset()
+
+   Resets the pyboard in a manner similar to pushing the external RESET
+   button.
+
+.. function:: bootloader()
+
+   Activate the bootloader without BOOT\* pins.
+
+Interrupt related functions
+---------------------------
+
+.. function:: disable_irq()
+
+   Disable interrupt requests.
+   Returns the previous IRQ state: ``False``/``True`` for disabled/enabled IRQs
+   respectively.  This return value can be passed to enable_irq to restore
+   the IRQ to its original state.
+
+.. function:: enable_irq(state=True)
+
+   Enable interrupt requests.
+   If ``state`` is ``True`` (the default value) then IRQs are enabled.
+   If ``state`` is ``False`` then IRQs are disabled.  The most common use of
+   this function is to pass it the value returned by ``disable_irq`` to
+   exit a critical section.
+
+Power related functions
+-----------------------
+
+.. function:: freq([sys_freq])
+
+   If given no arguments, returns a tuple of clock frequencies:
+   (SYSCLK, HCLK, PCLK1, PCLK2).
+   
+   If given an argument, sets the system frequency to that value in Hz.
+   Eg freq(120000000) gives 120MHz.  Note that not all values are
+   supported and the largest supported frequency not greater than
+   the given sys_freq will be selected.
+
+   Supported frequencies are (in MHz): 8, 16, 24, 30, 32, 36, 40, 42, 48,
+   54, 56, 60, 64, 72, 84, 96, 108, 120, 144, 168.
+
+   8MHz uses the HSE (external crystal) directly and 16MHz uses the HSI
+   (internal oscillator) directly.  The higher frequencies use the HSE to
+   drive the PLL (phase locked loop), and then use the output of the PLL.
+
+   Note that if you change the frequency while the USB is enabled then
+   the USB may become unreliable.  It is best to change the frequency
+   in boot.py, before the USB peripheral is started.  Also note that
+   frequencies below 36MHz do not allow the USB to function correctly.
+
+.. function:: wfi()
+
+   Wait for an interrupt.
+   This executies a ``wfi`` instruction which reduces power consumption
+   of the MCU until an interrupt occurs, at which point execution continues.
+
+.. function:: standby()
+
+
+.. function:: stop()
+
+Miscellaneous functions
+-----------------------
+
+.. function:: have_cdc()
+
+   Return True if USB is connected as a serial device, False otherwise.
+
+.. function:: hid((buttons, x, y, z))
+
+   Takes a 4-tuple (or list) and sends it to the USB host (the PC) to
+   signal a HID mouse-motion event.
+
+.. function:: info([dump_alloc_table])
+
+   Print out lots of information about the board.
+
+.. function:: repl_uart(uart)
+
+   Get or set the UART object that the REPL is repeated on.
+
+.. function:: rng()
+
+   Return a 30-bit hardware generated random number.
+
+.. function:: sync()
+
+   Sync all file systems.
+
+.. function:: unique_id()
+
+   Returns a string of 12 bytes (96 bits), which is the unique ID for the MCU.
+
+Classes
+-------
+
+.. toctree::
+   :maxdepth: 1
+
+   pyb.Accel.rst
+   pyb.ADC.rst
+   pyb.CAN.rst
+   pyb.DAC.rst
+   pyb.ExtInt.rst
+   pyb.I2C.rst
+   pyb.LCD.rst
+   pyb.LED.rst
+   pyb.Pin.rst
+   pyb.RTC.rst
+   pyb.Servo.rst
+   pyb.SPI.rst
+   pyb.Switch.rst
+   pyb.Timer.rst
+   pyb.UART.rst
+   pyb.USB_VCP.rst

docs/library/select.rst

@@ -0,0 +1,57 @@
+:mod:`select` -- wait for events on a set of streams
+========================================================================
+
+.. module:: select
+   :synopsis: wait for events on a set of streams
+
+This module provides functions to wait for events on streams (select streams
+which are ready for operations).
+
+Pyboard specifics
+-----------------
+
+Polling is an efficient way of waiting for read/write activity on multiple
+objects.  Current objects that support polling are: :class:`pyb.UART`,
+:class:`pyb.USB_VCP`.
+
+Functions
+---------
+
+.. function:: poll()
+
+   Create an instance of the Poll class.
+
+.. function:: select(rlist, wlist, xlist[, timeout])
+
+   Wait for activity on a set of objects.
+
+   This function is provided for compatibility and is not efficient. Usage
+   of :class:`Poll` is recommended instead.
+
+.. _class: Poll
+
+class ``Poll``
+--------------
+
+Methods
+~~~~~~~
+
+.. method:: poll.register(obj[, eventmask])
+
+   Register ``obj`` for polling.  ``eventmask`` is 1 for read, 2 for
+   write, 3 for read-write.
+
+.. method:: poll.unregister(obj)
+
+   Unregister ``obj`` from polling.
+
+.. method:: poll.modify(obj, eventmask)
+
+   Modify the ``eventmask`` for ``obj``.
+
+.. method:: poll.poll([timeout])
+
+   Wait for at least one of the registered objects to become ready. Returns
+   list of ready objects, or empty list on timeout.
+
+   Timeout is in milliseconds.

docs/library/struct.rst

@@ -0,0 +1,25 @@
+:mod:`struct` -- pack and unpack primitive data types
+=====================================================
+
+.. module:: struct
+   :synopsis: pack and unpack primitive data types
+
+See `Python struct <https://docs.python.org/3/library/struct.html>`_ for more
+information.
+
+Functions
+---------
+
+.. function:: calcsize(fmt)
+
+   Return the number of bytes needed to store the given ``fmt``.
+
+.. function:: pack(fmt, v1, v2, ...)
+
+   Pack the values ``v1``, ``v2``, ... according to the format string ``fmt``.
+   The return value is a bytes object encoding the values.
+
+.. function:: unpack(fmt, data)
+
+   Unpack from the ``data`` according to the format string ``fmt``.
+   The return value is a tuple of the unpacked values.

docs/library/sys.rst

@@ -0,0 +1,52 @@
+:mod:`sys` -- system specific functions
+=======================================
+
+.. module:: sys
+   :synopsis: system specific functions
+
+Functions
+---------
+
+.. function:: exit([retval])
+
+   Raise a ``SystemExit`` exception.  If an argument is given, it is the
+   value given to ``SystemExit``.
+
+Constants
+---------
+
+.. data:: argv
+
+   a mutable list of arguments this program started with
+
+.. data:: byteorder
+
+   the byte order of the system ("little" or "big")
+
+.. data:: path
+
+   a mutable list of directories to search for imported modules
+
+.. data:: platform
+
+   the platform that Micro Python is running on
+
+.. data:: stderr
+
+   standard error (connected to USB VCP, and optional UART object)
+
+.. data:: stdin
+
+   standard input (connected to USB VCP, and optional UART object)
+
+.. data:: stdout
+
+   standard output (connected to USB VCP, and optional UART object)
+
+.. data:: version
+
+   Python language version that this implementation conforms to, as a string
+
+.. data:: version_info
+
+   Python language version that this implementation conforms to, as a tuple of ints

docs/library/time.rst

@@ -0,0 +1,41 @@
+:mod:`time` -- time related functions
+=====================================
+
+.. module:: time
+   :synopsis: time related functions
+
+The ``time`` module provides functions for getting the current time and date,
+and for sleeping.
+
+Functions
+---------
+
+.. function:: localtime([secs])
+
+   Convert a time expressed in seconds since Jan 1, 2000 into an 8-tuple which
+   contains: (year, month, mday, hour, minute, second, weekday, yearday)
+   If secs is not provided or None, then the current time from the RTC is used.
+   year includes the century (for example 2014).
+
+   * month   is 1-12
+   * mday    is 1-31
+   * hour    is 0-23
+   * minute  is 0-59
+   * second  is 0-59
+   * weekday is 0-6 for Mon-Sun
+   * yearday is 1-366
+
+.. function:: mktime()
+
+   This is inverse function of localtime. It's argument is a full 8-tuple
+   which expresses a time as per localtime. It returns an integer which is
+   the number of seconds since Jan 1, 2000.
+
+.. function:: sleep(seconds)
+
+   Sleep for the given number of seconds.  Seconds can be a floating-point number to
+   sleep for a fractional number of seconds.
+
+.. function:: time()
+
+   Returns the number of seconds, as an integer, since 1/1/2000.

docs/library/uheapq.rst

@@ -0,0 +1,25 @@
+:mod:`uheapq` -- heap queue algorithm
+=====================================
+
+.. module:: uheapq
+   :synopsis: heap queue algorithm
+
+This module implements the heap queue algorithm.
+
+A heap queue is simply a list that has its elements stored in a certain way.
+
+Functions
+---------
+
+.. function:: heappush(heap, item)
+
+   Push the ``item`` onto the ``heap``.
+
+.. function:: heappop(heap)
+
+   Pop the first item from the ``heap``, and return it.  Raises IndexError if
+   heap is empty.
+
+.. function:: heapify(x)
+
+   Convert the list ``x`` into a heap.  This is an in-place operation.

docs/library/ujson.rst

@@ -0,0 +1,20 @@
+:mod:`ujson` -- JSON encoding and decoding
+==========================================
+
+.. module:: ujson
+   :synopsis: JSON encoding and decoding
+
+This modules allows to convert between Python objects and the JSON
+data format.
+
+Functions
+---------
+
+.. function:: dumps(obj)
+
+   Return ``obj`` represented as a JSON string.
+
+.. function:: loads(str)
+
+   Parse the JSON ``str`` and return an object.  Raises ValueError if the
+   string is not correctly formed.

docs/library/usocket.rst

@@ -0,0 +1,17 @@
+:mod:`usocket` -- socket module
+===============================
+
+.. module:: usocket
+   :synopsis: socket module
+
+Socket functionality.
+
+Functions
+---------
+
+.. function:: getaddrinfo(host, port)
+
+
+.. function:: socket(family=AF_INET, type=SOCK_STREAM, fileno=-1)
+
+   Create a socket.

docs/license.rst

@@ -0,0 +1,24 @@
+Micro Python license information
+================================
+
+The MIT License (MIT)
+
+Copyright (c) 2013, 2014 Damien P. George, and others
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

docs/quickref.rst

@@ -0,0 +1,140 @@
+.. _quickref:
+
+Quick reference for the pyboard
+===============================
+
+.. image:: http://micropython.org/resources/pybv10-pinout.jpg
+    :alt: PYBv1.0 pinout
+    :width: 700px
+
+General board control
+---------------------
+
+See :mod:`pyb`. ::
+
+    import pyb
+
+    pyb.delay(50) # wait 50 milliseconds
+    pyb.millis() # number of milliseconds since bootup
+    pyb.repl_uart(pyb.UART(1, 9600)) # duplicate REPL on UART(1)
+    pyb.wfi() # pause CPU, waiting for interrupt
+    pyb.freq() # get CPU and bus frequencies
+    pyb.freq(60000000) # set CPU freq to 60MHz
+    pyb.stop() # stop CPU, waiting for external interrupt
+
+LEDs
+----
+
+See :ref:`pyb.LED <pyb.LED>`. ::
+
+    from pyb import LED
+
+    led = LED(1) # red led
+    led.toggle()
+    led.on()
+    led.off()
+
+Pins and GPIO
+-------------
+
+See :ref:`pyb.Pin <pyb.Pin>`. ::
+
+    from pyb import Pin
+
+    p_out = Pin('X1', Pin.OUT_PP)
+    p_out.high()
+    p_out.low()
+
+    p_in = Pin('X2', Pin.IN, Pin.PULL_UP)
+    p_in.value() # get value, 0 or 1
+
+External interrupts
+-------------------
+
+See :ref:`pyb.ExtInt <pyb.ExtInt>`. ::
+
+    from pyb import Pin, ExtInt
+
+    callback = lambda e: print("intr")
+    ext = ExtInt(Pin('Y1'), ExtInt.IRQ_RISING, Pin.PULL_NONE, callback)
+
+Timers
+------
+
+See :ref:`pyb.Timer <pyb.Timer>`. ::
+
+    from pyb import Timer
+
+    tim = Timer(1, freq=1000)
+    tim.counter() # get counter value
+    tim.freq(0.5) # 0.5 Hz
+    tim.callback(lambda t: pyb.LED(1).toggle())
+
+PWM (pulse width modulation)
+----------------------------
+
+See :ref:`pyb.Pin <pyb.Pin>` and :ref:`pyb.Timer <pyb.Timer>`. ::
+
+    from pyb import Pin, Timer
+
+    p = Pin('X1') # X1 has TIM2, CH1
+    tim = Timer(2, freq=1000)
+    ch = tim.channel(1, Timer.PWM, pin=p)
+    ch.pulse_width_percent(50)
+
+ADC (analog to digital conversion)
+----------------------------------
+
+See :ref:`pyb.Pin <pyb.Pin>` and :ref:`pyb.ADC <pyb.ADC>`. ::
+
+    from pyb import Pin, ADC
+
+    adc = ADC(Pin('X19'))
+    adc.read() # read value, 0-4095
+
+DAC (digital to analog conversion)
+----------------------------------
+
+See :ref:`pyb.Pin <pyb.Pin>` and :ref:`pyb.DAC <pyb.DAC>`. ::
+
+    from pyb import Pin, DAC
+
+    dac = DAC(Pin('X5'))
+    dac.write(120) # output between 0 and 255
+
+UART (serial bus)
+-----------------
+
+See :ref:`pyb.UART <pyb.UART>`. ::
+
+    from pyb import UART
+
+    uart = UART(1, 9600)
+    uart.write('hello')
+    uart.read(5) # read up to 5 bytes
+
+SPI bus
+-------
+
+See :ref:`pyb.SPI <pyb.SPI>`. ::
+
+    from pyb import SPI
+
+    spi = SPI(1, SPI.MASTER, baudrate=200000, polarity=1, phase=0)
+    spi.send('hello')
+    spi.recv(5) # receive 5 bytes on the bus
+    spi.send_recv('hello') # send a receive 5 bytes
+
+I2C bus
+-------
+
+See :ref:`pyb.I2C <pyb.I2C>`. ::
+
+    from pyb import I2C
+
+    i2c = I2C(1, I2C.MASTER, baudrate=100000)
+    i2c.scan() # returns list of slave addresses
+    i2c.send('hello', 0x42) # send 5 bytes to slave with address 0x42
+    i2c.recv(5, 0x42) # receive 5 bytes from slave
+    i2c.mem_read(2, 0x42, 0x10) # read 2 bytes from slave 0x42, slave memory 0x10
+    i2c.mem_write('xy', 0x42, 0x10) # write 2 bytes to slave 0x42, slave memory 0x10

docs/topindex.html

@@ -0,0 +1,93 @@
+{% extends "defindex.html" %}
+{% block body %}
+
+  <h1>Micro Python documentation</h1>
+
+  <p>
+    {{ _('Welcome! This is the documentation for Micro Python') }}
+    v{{ release|e }}{% if last_updated %}, {{ _('last updated') }} {{ last_updated|e }}{% endif %}.
+  </p>
+
+  <p><strong>Documentation for Micro Python and the pyboard:</strong></p>
+
+  <table class="contentstable"><tr>
+    <td width="40%" style="padding-left:2em;">
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("quickref") }}">Quick reference for the pyboard</a><br/>
+        <span class="linkdescr">pinout for the pyboard and snippets of useful code</span>
+      </p>
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("general") }}">General information about the pyboard</a><br/>
+        <span class="linkdescr">read this first for a quick overview</span>
+      </p>
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("tutorial/index") }}">Tutorials and code examples</a><br/>
+        <span class="linkdescr">start here</span>
+      </p>
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("library/index") }}">Library Reference</a><br/>
+        <span class="linkdescr">Micro Python libraries, including the <a href="{{ pathto("library/pyb") }}">pyb module</a></span>
+      </p>
+    </td>
+    <td width="40%" style="padding-left:2em;">
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("hardware/index") }}">The pyboard hardware</a><br/>
+        <span class="linkdescr">schematics, dimensions and component datasheets</span>
+      </p>
+      <p class="biglink">
+        <a class="biglink" href="http://micropython.org/resources/Micro-Python-Windows-setup.pdf">Guide for pyboard on Windows (PDF)</a><br/>
+        <span class="linkdescr">including DFU programming</span>
+      </p>
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("license") }}">License</a><br/>
+        <span class="linkdescr">Micro Python license information</span>
+      </p>
+    </td>
+  </tr></table>
+
+  <p><strong>Indices and tables:</strong></p>
+  <table class="contentstable"><tr>
+    <td width="40%" style="padding-left:2em;">
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("py-modindex") }}">Module index</a><br/>
+        <span class="linkdescr">quick access to all modules</span>
+      </p>
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("genindex") }}">Full index</a><br/>
+        <span class="linkdescr">all functions, classes, constants</span>
+      </p>
+    </td>
+    <td width="40%" style="padding-left:2em;">
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("contents") }}">Table of contents</a><br/>
+        <span class="linkdescr">a list of all sections and subsections</span>
+      </p>
+      <p class="biglink">
+        <a class="biglink" href="{{ pathto("search") }}">Search page</a><br/>
+        <span class="linkdescr">search this documentation</span>
+      </p>
+    </td></tr>
+  </table>
+
+  <p><strong>External links:</strong></p>
+
+  <table class="contentstable"><tr>
+    <td width="40%" style="padding-left:2em;">
+      <p class="biglink">
+      <a class="biglink" href="http://micropython.org">Micro Python homepage</a><br/>
+        <span class="linkdescr">the official Micro Python site</span>
+      </p>
+      <p class="biglink">
+        <a class="biglink" href="http://forum.micropython.org">Micro Python forum</a><br/>
+        <span class="linkdescr">community discussion for all things related to Micro Python</span>
+      </p>
+    </td>
+    <td width="40%" style="padding-left:2em;">
+      <p class="biglink">
+        <a class="biglink" href="https://github.com/micropython">Micro Python on GitHub</a><br/>
+        <span class="linkdescr">contribute to the source code on GitHub</span>
+      </p>
+    </td>
+  </tr></table>
+
+{% endblock %}

docs/tutorial/amp_skin.rst

@@ -3,11 +3,11 @@ The AMP audio skin
 
 Soldering and using the AMP audio skin.
 
-.. image:: http://micropython.org/static/doc/skin-amp-1.jpg
+.. image:: img/skin_amp_1.jpg
     :alt: AMP skin
     :width: 250px
 
-.. image:: http://micropython.org/static/doc/skin-amp-3.jpg
+.. image:: img/skin_amp_2.jpg
     :alt: AMP skin
     :width: 250px
 
@@ -26,6 +26,7 @@ potentiometer, which is an I2C device with address 46 on the ``IC2(1)`` bus.
 
 To set the volume, define the following function::
 
+    import pyb
     def volume(val):
         pyb.I2C(1, pyb.I2C.MASTER).mem_write(val, 46, 0)
 
@@ -50,11 +51,11 @@ For example::
     dac.write_timed(buf, 400 * len(buf), mode=DAC.CIRCULAR)
 
 You can also play WAV files using the Python ``wave`` module.  You can get
-the wave module [here](/static/doc/examples/wave.py) and you will also need
-the chunk module available [here](/static/doc/examples/chunk.py).  Put these
+the wave module `here <http://micropython.org/resources/examples/wave.py>`_ and you will also need
+the chunk module available `here <http://micropython.org/resources/examples/chunk.py>`_.  Put these
 on your pyboard (either on the flash or the SD card in the top-level
 directory).  You will need an 8-bit WAV file to play, such as
-[this one](/static/doc/examples/test.wav).  Then you can do::
+`this one <http://micropython.org/resources/examples/test.wav>`_.  Then you can do::
 
     >>> import wave
     >>> from pyb import DAC

docs/tutorial/debounce.rst

@@ -0,0 +1,37 @@
+Debouncing a pin input
+======================
+
+A pin used as input from a switch or other mechanical device can have a lot
+of noise on it, rapidly changing from low to high when the switch is first
+pressed or released.  This noise can be eliminated using a capacitor (a
+debouncing circuit).  It can also be eliminated using a simple function that
+makes sure the value on the pin is stable.
+
+The following function does just this.  It gets the current value of the given
+pin, and then waits for the value to change.  The new pin value must be stable
+for a continuous 20ms for it to register the change.  You can adjust this time
+(to say 50ms) if you still have noise. ::
+
+    import pyb
+
+    def wait_pin_change(pin):
+        # wait for pin to change value
+        # it needs to be stable for a continuous 20ms
+        cur_value = pin.value()
+        active = 0
+        while active < 20:
+            if pin.value() != cur_value:
+                active += 1
+            else:
+                active = 0
+            pyb.delay(1)
+
+
+Use it something like this::
+
+    import pyb
+
+    pin_x1 = pyb.Pin('X1', pyb.Pin.IN, pyb.Pin.PULL_DOWN)
+    while True:
+        wait_pin_change(pin_x1)
+        pyb.LED(4).toggle()

docs/tutorial/fading_led.rst

@@ -0,0 +1,89 @@
+Fading LEDs
+===========
+
+In addition to turning LEDs on and off, it is also possible to control the brightness of an LED using `Pulse-Width Modulation (PWM) <http://en.wikipedia.org/wiki/Pulse-width_modulation>`_, a common technique for obtaining variable output from a digital pin. This allows us to fade an LED:
+
+.. image:: http://upload.wikimedia.org/wikipedia/commons/a/a9/Fade.gif
+
+Components
+----------
+
+You will need:
+
+- Standard 5 or 3 mm LED
+- 100 Ohm resistor
+- Wires
+- `Breadboard <http://en.wikipedia.org/wiki/Breadboard>`_ (optional, but makes things easier)
+
+Connecting Things Up
+--------------------
+
+For this tutorial, we will use the ``X1`` pin. Connect one end of the resistor to ``X1``, and the other end to the **anode** of the LED, which is the longer leg. Connect the **cathode** of the LED to ground.
+
+.. image:: img/fading_leds_breadboard_fritzing.png
+
+Code
+----
+By examining the :ref:`quickref`, we see that ``X1`` is connected to channel 1 of timer 5 (``TIM5 CH1``). Therefore we will first create a ``Timer`` object for timer 5, then create a ``TimerChannel`` object for channel 1::
+    
+    from pyb import Timer
+    from time import sleep
+    
+    # timer 5 will be created with a frequency of 100 Hz
+    tim = pyb.Timer(5, freq=100)
+    tchannel = tim.channel(1, Timer.PWM, pin=pyb.Pin.board.X1, pulse_width=0)
+
+Brightness of the LED in PWM is controlled by controlling the pulse-width, that is the amount of time the LED is on every cycle. With a timer frequency of 100 Hz, each cycle takes 0.01 second, or 10 ms.
+
+To achieve the fading effect shown at the beginning of this tutorial, we want to set the pulse-width to a small value, then slowly increase the pulse-width to brighten the LED, and start over when we reach some maximum brightness::
+
+    # maximum and minimum pulse-width, which corresponds to maximum
+    # and minimum brightness
+    max_width = 200000
+    min_width = 20000
+
+    # how much to change the pulse-width by each step
+    wstep = 1500
+    cur_width = min_width
+    
+    while True:
+      tchannel.pulse_width(cur_width)
+      
+      # this determines how often we change the pulse-width. It is
+      # analogous to frames-per-second
+      sleep(0.01)
+    
+      cur_width += wstep
+    
+      if cur_width > max_width:
+        cur_width = min_width
+
+Breathing Effect
+----------------
+
+If we want to have a breathing effect, where the LED fades from dim to bright then bright to dim, then we simply need to reverse the sign of ``wstep`` when we reach maximum brightness, and reverse it again at minimum brightness. To do this we modify the ``while`` loop to be::
+
+    while True:
+      tchannel.pulse_width(cur_width)
+    
+      sleep(0.01)
+    
+      cur_width += wstep
+    
+      if cur_width > max_width:
+        cur_width = max_width
+        wstep *= -1
+      elif cur_width < min_width:
+        cur_width = min_width
+        wstep *= -1
+
+Advanced Exercise
+-----------------
+
+You may have noticed that the LED brightness seems to fade slowly, but increases quickly. This is because our eyes interprets brightness logarithmically (`Weber's Law <http://www.telescope-optics.net/eye_intensity_response.htm>`_
+), while the LED's brightness changes linearly, that is by the same amount each time. How do you solve this problem? (Hint: what is the opposite of the logarithmic function?)
+
+Addendum
+--------
+
+We could have also used the digital-to-analog converter (DAC) to achieve the same effect. The PWM method has the advantage that it drives the LED with the same current each time, but for different lengths of time. This allows better control over the brightness, because LEDs do not necessarily exhibit a linear relationship between the driving current and brightness.

docs/tutorial/index.rst

@@ -22,6 +22,7 @@ the tutorial through in the order below.
    usb_mouse.rst
    timer.rst
    assembler.rst
+   power_ctrl.rst
 
 Tutorials requiring extra components
 ------------------------------------
@@ -31,5 +32,16 @@ Tutorials requiring extra components
    :numbered:
 
    servo.rst
+   fading_led.rst
    lcd_skin.rst
    amp_skin.rst
+
+Tips, tricks and useful things to know
+--------------------------------------
+
+.. toctree::
+   :maxdepth: 1
+   :numbered:
+
+   debounce.rst
+   pass_through.rst

docs/tutorial/lcd_skin.rst

@@ -3,11 +3,11 @@ The LCD and touch-sensor skin
 
 Soldering and using the LCD and touch-sensor skin.
 
-.. image:: http://micropython.org/static/doc/skin-lcd-3.jpg
+.. image:: img/skin_lcd_1.jpg
     :alt: pyboard with LCD skin
     :width: 250px
 
-.. image:: http://micropython.org/static/doc/skin-lcd-1.jpg
+.. image:: img/skin_lcd_2.jpg
     :alt: pyboard with LCD skin
     :width: 250px
 
@@ -24,12 +24,14 @@ Using the LCD
 To get started using the LCD, try the following at the Micro Python prompt.
 Make sure the LCD skin is attached to the pyboard as pictured at the top of this page. ::
 
+    >>> import pyb
     >>> lcd = pyb.LCD('X')
     >>> lcd.light(True)
     >>> lcd.write('Hello uPy!\n')
 
 You can make a simple animation using the code::
 
+    import pyb
     lcd = pyb.LCD('X')
     lcd.light(True)
     for x in range(-80, 128):
@@ -46,6 +48,7 @@ MPR121 capacitive touch sensor has address 90.
 
 To get started, try::
 
+    >>> import pyb
     >>> i2c = pyb.I2C(1, pyb.I2C.MASTER)
     >>> i2c.mem_write(4, 90, 0x5e)
     >>> touch = i2c.mem_read(1, 90, 0)[0]
@@ -55,7 +58,7 @@ enables the 4 touch sensors.  The third line reads the touch
 status and the ``touch`` variable holds the state of the 4 touch
 buttons (A, B, X, Y).
 
-There is a simple driver [here](/static/doc/examples/mpr121.py)
+There is a simple driver `here <http://micropython.org/resources/examples/mpr121.py>`_
 which allows you to set the threshold and debounce parameters, and
 easily read the touch status and electrode voltage levels.  Copy
 this script to your pyboard (either flash or SD card, in the top
@@ -78,4 +81,4 @@ initialise the I2C bus using::
     >>> m = mpr121.MPR121(pyb.I2C(2, pyb.I2C.MASTER))
 
 There is also a demo which uses the LCD and the touch sensors together,
-and can be found [here](/static/doc/examples/lcddemo.py).
+and can be found `here <http://micropython.org/resources/examples/lcddemo.py>`_.

docs/tutorial/pass_through.rst

@@ -0,0 +1,17 @@
+Making a UART - USB pass through
+================================
+
+It's as simple as::
+
+    import pyb
+    import select
+
+    def pass_through(usb, uart):
+        while True:
+            select.select([usb, uart], [], [])
+            if usb.any():
+                uart.write(usb.read(256))
+            if uart.any():
+                usb.write(uart.read(256))
+
+    pass_through(pyb.USB_VCP(), pyb.UART(1, 9600))

docs/tutorial/power_ctrl.rst

@@ -0,0 +1,13 @@
+Power control
+=============
+
+:meth:`pyb.wfi` is used to reduce power consumption while waiting for an
+event such as an interrupt.  You would use it in the following situation::
+
+    while True:
+        do_some_processing()
+        pyb.wfi()
+
+Control the frequency using :meth:`pyb.freq`::
+
+    pyb.freq(30000000) # set CPU frequency to 30MHz

docs/tutorial/repl.rst

@@ -26,7 +26,7 @@ and see which COM port it is (eg COM4).
 
 You now need to run your terminal program.  You can use HyperTerminal if you
 have it installed, or download the free program PuTTY:
-[`putty.exe`](http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html).
+`putty.exe <http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html>`_.
 Using your serial program you must connect to the COM port that you found in the
 previous step.  With PuTTY, click on "Session" in the left-hand panel, then click
 the "Serial" radio button on the right, then enter you COM port (eg COM4) in the
@@ -39,7 +39,7 @@ Open a terminal and run::
 
     screen /dev/tty.usbmodem*
     
-When you are finishend and want to exit screen, type CTRL-A CTRL-\\.
+When you are finished and want to exit screen, type CTRL-A CTRL-\\.
 
 Linux
 -----

docs/tutorial/script.rst

@@ -10,7 +10,7 @@ Connecting your pyboard
 Connect your pyboard to your PC (Windows, Mac or Linux) with a micro USB cable.
 There is only one way that the cable will connect, so you can't get it wrong.
 
-<img src="/static/doc/pyboard-usb-micro.jpg" alt="pyboard with USB micro cable" style="width:200px; border:1px solid black; display:inline-block;"/>
+.. image:: img/pyboard_usb_micro.jpg
 
 When the pyboard is connected to your PC it will power on and enter the start up
 process (the boot process).  The green LED should light up for half a second or
@@ -46,16 +46,16 @@ a window (or command line) should be showing the files on the pyboard drive.
 The drive you are looking at is known as ``/flash`` by the pyboard, and should contain
 the following 4 files:
 
-  - [``boot.py``](/static/doc/fresh-pyboard/boot.py) -- this script is executed when the pyboard boots up.  It sets
+* `boot.py <http://micropython.org/resources/fresh-pyboard/boot.py>`_ -- this script is executed when the pyboard boots up.  It sets
     up various configuration options for the pyboard.
 
-  - [``main.py``](/static/doc/fresh-pyboard/main.py) -- this is the main script that will contain your Python program.
+* `main.py <http://micropython.org/resources/fresh-pyboard/main.py>`_ -- this is the main script that will contain your Python program.
     It is executed after ``boot.py``.
 
-  - [``README.txt``](/static/doc/fresh-pyboard/README.txt) -- this contains some very basic information about getting
+* `README.txt <http://micropython.org/resources/fresh-pyboard/README.txt>`_ -- this contains some very basic information about getting
     started with the pyboard.
 
-  - [``pybcdc.inf``](/static/doc/fresh-pyboard/pybcdc.inf) -- this is a Windows driver file to configure the serial USB
+* `pybcdc.inf <http://micropython.org/resources/fresh-pyboard/pybcdc.inf>`_ -- this is a Windows driver file to configure the serial USB
     device.  More about this in the next tutorial.
 
 Editing ``main.py``

docs/tutorial/servo.rst

@@ -8,7 +8,7 @@ These motors have 3 wires: ground, power and signal.  On the pyboard you
 can connect them in the bottom right corner, with the signal pin on the
 far right.  Pins X1, X2, X3 and X4 are the 4 dedicated servo signal pins.
 
-<img src="/static/doc/pyboard-servo.jpg" alt="pyboard with servo motors" style="width:250px; border:1px solid black; display:inline-block;"/>
+.. image:: img/pyboard_servo.jpg
 
 In this picture there are male-male double adaptors to connect the servos
 to the header pins on the pyboard.

drivers/cc3000/inc/ccspi.h

@@ -65,7 +65,6 @@ extern void SpiClose(void);
 extern void SpiPauseSpi(void);
 extern void SpiResumeSpi(void);
 extern long SpiWrite(unsigned char *pUserBuffer, unsigned short usLength);
-extern void SpiResumeSpi(void);
 extern void SpiConfigureHwMapping(void);
 extern void SpiCleanGPIOISR(void);
 extern void SSIConfigure(unsigned long ulSSIFreq, unsigned long bForceGpioConfiguration, unsigned long uiReconfigureSysClock);

drivers/cc3000/src/ccspi.c

@@ -98,14 +98,12 @@ typedef struct {
     unsigned char *pTxPacket;
     unsigned char *pRxPacket;
 } tSpiInformation;
-tSpiInformation sSpiInformation;
+STATIC tSpiInformation sSpiInformation;
 
-char spi_buffer[CC3000_RX_BUFFER_SIZE];
+STATIC char spi_buffer[CC3000_RX_BUFFER_SIZE];
 unsigned char wlan_tx_buffer[CC3000_TX_BUFFER_SIZE];
 
 STATIC const mp_obj_fun_builtin_t irq_callback_obj;
-void SpiWriteDataSynchronous(unsigned char *data, unsigned short size);
-void SpiReadDataSynchronous(unsigned char *data, unsigned short size);
 
 // set the pins to use to communicate with the CC3000
 // the arguments must be of type pin_obj_t* and SPI_HandleTypeDef*
@@ -185,17 +183,6 @@ void SpiOpen(gcSpiHandleRx pfRxHandler)
     DEBUG_printf("SpiOpen finished; IRQ.pin=%d IRQ_LINE=%d\n", PIN_IRQ->pin, PIN_IRQ->pin);
 }
 
-
-void SpiPauseSpi(void)
-{
-   extint_disable(PIN_IRQ->pin);
-}
-
-void SpiResumeSpi(void)
-{
-   extint_enable(PIN_IRQ->pin);
-}
-
 long ReadWlanInterruptPin(void)
 {
     return HAL_GPIO_ReadPin(PIN_IRQ->gpio, PIN_IRQ->pin_mask);
@@ -207,13 +194,34 @@ void WriteWlanPin(unsigned char val)
             (WLAN_ENABLE)? GPIO_PIN_SET:GPIO_PIN_RESET);
 }
 
-void __delay_cycles(volatile int x)
+STATIC void SpiWriteDataSynchronous(unsigned char *data, unsigned short size)
+{
+    DEBUG_printf("SpiWriteDataSynchronous(data=%p [%x %x %x %x], size=%u)\n", data, data[0], data[1], data[2], data[3], size);
+    __disable_irq();
+    if (HAL_SPI_TransmitReceive(SPI_HANDLE, data, data, size, SPI_TIMEOUT) != HAL_OK) {
+        //BREAK();
+    }
+    __enable_irq();
+    DEBUG_printf(" - rx data = [%x %x %x %x]\n", data[0], data[1], data[2], data[3]);
+}
+
+STATIC void SpiReadDataSynchronous(unsigned char *data, unsigned short size)
+{
+    memset(data, READ, size);
+    __disable_irq();
+    if (HAL_SPI_TransmitReceive(SPI_HANDLE, data, data, size, SPI_TIMEOUT) != HAL_OK) {
+       //BREAK();
+    }
+    __enable_irq();
+}
+
+STATIC void __delay_cycles(volatile int x)
 {
     x *= 6; // for 168 MHz CPU
     while (x--);
 }
 
-long SpiFirstWrite(unsigned char *ucBuf, unsigned short usLength)
+STATIC long SpiFirstWrite(unsigned char *ucBuf, unsigned short usLength)
 {
     DEBUG_printf("SpiFirstWrite %lu\n", sSpiInformation.ulSpiState);
 
@@ -308,28 +316,9 @@ long SpiWrite(unsigned char *pUserBuffer, unsigned short usLength)
     return(0);
 }
 
-void SpiWriteDataSynchronous(unsigned char *data, unsigned short size)
-{
-    DEBUG_printf("SpiWriteDataSynchronous(data=%p [%x %x %x %x], size=%u)\n", data, data[0], data[1], data[2], data[3], size);
-    __disable_irq();
-    if (HAL_SPI_TransmitReceive(SPI_HANDLE, data, data, size, SPI_TIMEOUT) != HAL_OK) {
-        //BREAK();
-    }
-    __enable_irq();
-    DEBUG_printf(" - rx data = [%x %x %x %x]\n", data[0], data[1], data[2], data[3]);
-}
-
-void SpiReadDataSynchronous(unsigned char *data, unsigned short size)
-{
-    memset(data, READ, size);
-    __disable_irq();
-    if (HAL_SPI_TransmitReceive(SPI_HANDLE, data, data, size, SPI_TIMEOUT) != HAL_OK) {
-       //BREAK();
-    }
-    __enable_irq();
-}
-
-void SpiReadPacket(void)
+#if 0
+unused
+STATIC void SpiReadPacket(void)
 {
     int length;
 
@@ -344,13 +333,14 @@ void SpiReadPacket(void)
 
     sSpiInformation.ulSpiState = eSPI_STATE_READ_EOT;
 }
+#endif
 
-void SpiReadHeader(void)
+STATIC void SpiReadHeader(void)
 {
     SpiReadDataSynchronous(sSpiInformation.pRxPacket, 10);
 }
 
-void SpiTriggerRxProcessing(void)
+STATIC void SpiTriggerRxProcessing(void)
 {
     SpiPauseSpi();
     CS_HIGH();
@@ -367,7 +357,7 @@ void SpiTriggerRxProcessing(void)
 }
 
 
-long SpiReadDataCont(void)
+STATIC long SpiReadDataCont(void)
 {
     long data_to_recv=0;
     unsigned char *evnt_buff, type;
@@ -413,7 +403,7 @@ long SpiReadDataCont(void)
     return 0;
 }
 
-void SSIContReadOperation(void)
+STATIC void SSIContReadOperation(void)
 {
     // The header was read - continue with  the payload read
     if (!SpiReadDataCont()) {
@@ -423,8 +413,7 @@ void SSIContReadOperation(void)
     }
 }
 
-STATIC mp_obj_t irq_callback(mp_obj_t line)
-{
+STATIC mp_obj_t irq_callback(mp_obj_t line) {
     DEBUG_printf("<< IRQ; state=%lu >>\n", sSpiInformation.ulSpiState);
     switch (sSpiInformation.ulSpiState) {
         case eSPI_STATE_POWERUP:
@@ -459,3 +448,13 @@ STATIC mp_obj_t irq_callback(mp_obj_t line)
 }
 
 STATIC MP_DEFINE_CONST_FUN_OBJ_1(irq_callback_obj, irq_callback);
+
+void SpiPauseSpi(void) {
+    DEBUG_printf("SpiPauseSpi\n");
+    extint_disable(PIN_IRQ->pin);
+}
+
+void SpiResumeSpi(void) {
+    DEBUG_printf("SpiResumeSpi\n");
+    extint_enable(PIN_IRQ->pin);
+}

esp8266/Makefile

@@ -0,0 +1,113 @@
+include ../py/mkenv.mk
+
+# qstr definitions (must come before including py.mk)
+QSTR_DEFS = qstrdefsport.h #$(BUILD)/pins_qstr.h
+
+# include py core make definitions
+include ../py/py.mk
+
+PORT = /dev/ttyACM0
+CROSS_COMPILE = xtensa-lx106-elf-
+ESP_SDK = $(shell $(CC) -print-sysroot)/..
+
+INC =  -I.
+INC += -I$(PY_SRC)
+INC += -I../stmhal
+INC += -I$(BUILD)
+INC += -I$(ESP_SDK)/include
+
+CFLAGS_XTENSA = -fsingle-precision-constant -Wdouble-promotion \
+	-D__ets__ -DICACHE_FLASH \
+	-fno-inline-functions \
+	-Wl,-EL -mlongcalls -mtext-section-literals \
+
+CFLAGS = $(INC) -Wall -Wpointer-arith -Werror -ansi -std=gnu99 -nostdlib $(CFLAGS_XTENSA) $(COPT)
+
+LDFLAGS = -nostdlib -T esp8266.ld -Map=$(@:.elf=.map) --cref
+LIBS = -L$(ESP_SDK)/lib -lmain -ljson -llwip -lpp -lnet80211 -lwpa -lphy -lnet80211
+
+LIBGCC_FILE_NAME = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+LIBS += -L$(dir $(LIBGCC_FILE_NAME)) -lgcc
+
+# Debugging/Optimization
+ifeq ($(DEBUG), 1)
+CFLAGS += -g
+COPT = -O0
+else
+CFLAGS += -fdata-sections -ffunction-sections
+COPT += -Os -DNDEBUG
+LDFLAGS += --gc-sections
+endif
+
+SRC_C = \
+	strtoll.c \
+	main.c \
+	esp_mphal.c \
+	gccollect.c \
+	pybstdio.c \
+	uart.c \
+	modpyb.c \
+
+STM_SRC_C = $(addprefix stmhal/,\
+	printf.c \
+	string0.c \
+	pyexec.c \
+	readline.c \
+	)
+
+SRC_S = \
+	gchelper.s \
+
+OBJ =
+OBJ += $(PY_O)
+OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
+OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
+OBJ += $(addprefix $(BUILD)/, $(STM_SRC_C:.c=.o))
+#OBJ += $(BUILD)/pins_$(BOARD).o
+
+all: $(BUILD)/firmware-combined.bin
+
+.PHONY: deploy
+
+deploy: $(BUILD)/firmware-combined.bin
+	$(ECHO) "Writing $< to the board"
+	#$(Q)esptool.py --port $(PORT) write_flash 0 $<
+	$(Q)esptool.py --port $(PORT) write_flash 0 $(BUILD)/firmware.elf-0x00000.bin 0x10000 $(BUILD)/firmware.elf-0x10000.bin
+
+$(BUILD)/firmware-combined.bin: $(BUILD)/firmware.elf
+	$(ECHO) "Create $@"
+	$(Q)esptool.py elf2image $^
+	$(Q)$(PYTHON) makeimg.py $(BUILD)/firmware.elf-0x00000.bin $(BUILD)/firmware.elf-0x10000.bin $@
+
+$(BUILD)/firmware.elf: $(OBJ)
+	$(ECHO) "LINK $@"
+	$(Q)$(LD) $(LDFLAGS) -o $@ $(OBJ) $(LIBS)
+	$(Q)$(SIZE) $@
+
+#MAKE_PINS = boards/make-pins.py
+#BOARD_PINS = boards/$(BOARD)/pins.csv
+#AF_FILE = boards/stm32f4xx_af.csv
+#PREFIX_FILE = boards/stm32f4xx_prefix.c
+#GEN_PINS_SRC = $(BUILD)/pins_$(BOARD).c
+#GEN_PINS_HDR = $(HEADER_BUILD)/pins.h
+#GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
+#GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
+#GEN_PINS_AF_PY = $(BUILD)/pins_af.py
+
+# Making OBJ use an order-only depenedency on the generated pins.h file
+# has the side effect of making the pins.h file before we actually compile
+# any of the objects. The normal dependency generation will deal with the
+# case when pins.h is modified. But when it doesn't exist, we don't know
+# which source files might need it.
+#$(OBJ): | $(HEADER_BUILD)/pins.h
+
+# Use a pattern rule here so that make will only call make-pins.py once to make
+# both pins_$(BOARD).c and pins.h
+#$(BUILD)/%_$(BOARD).c $(HEADER_BUILD)/%.h $(HEADER_BUILD)/%_af_const.h $(BUILD)/%_qstr.h: boards/$(BOARD)/%.csv $(MAKE_PINS) $(AF_FILE) $(PREFIX_FILE) | $(HEADER_BUILD)
+#	$(ECHO) "Create $@"
+#	$(Q)$(PYTHON) $(MAKE_PINS) --board $(BOARD_PINS) --af $(AF_FILE) --prefix $(PREFIX_FILE) --hdr $(GEN_PINS_HDR) --qstr $(GEN_PINS_QSTR) --af-const $(GEN_PINS_AF_CONST) --af-py $(GEN_PINS_AF_PY) > $(GEN_PINS_SRC)
+#
+#$(BUILD)/pins_$(BOARD).o: $(BUILD)/pins_$(BOARD).c
+#	$(call compile_c)
+
+include ../py/mkrules.mk

esp8266/eagle.rom.addr.v6.ld

@@ -0,0 +1,344 @@
+PROVIDE ( Cache_Read_Disable = 0x400047f0 );
+PROVIDE ( Cache_Read_Enable = 0x40004678 );
+PROVIDE ( FilePacketSendReqMsgProc = 0x400035a0 );
+PROVIDE ( FlashDwnLdParamCfgMsgProc = 0x4000368c );
+PROVIDE ( FlashDwnLdStartMsgProc = 0x40003538 );
+PROVIDE ( FlashDwnLdStopReqMsgProc = 0x40003658 );
+PROVIDE ( GetUartDevice = 0x40003f4c );
+PROVIDE ( MD5Final = 0x40009900 );
+PROVIDE ( MD5Init = 0x40009818 );
+PROVIDE ( MD5Update = 0x40009834 );
+PROVIDE ( MemDwnLdStartMsgProc = 0x400036c4 );
+PROVIDE ( MemDwnLdStopReqMsgProc = 0x4000377c );
+PROVIDE ( MemPacketSendReqMsgProc = 0x400036f0 );
+PROVIDE ( RcvMsg = 0x40003eac );
+PROVIDE ( SHA1Final = 0x4000b648 );
+PROVIDE ( SHA1Init = 0x4000b584 );
+PROVIDE ( SHA1Transform = 0x4000a364 );
+PROVIDE ( SHA1Update = 0x4000b5a8 );
+PROVIDE ( Wait_SPI_Idle = 0x4000448c );
+PROVIDE ( SPIEraseArea = 0x40004b44 );
+PROVIDE ( SPIEraseBlock = 0x400049b4 );
+PROVIDE ( SPIEraseChip = 0x40004984 );
+PROVIDE ( SPIEraseSector = 0x40004a00 );
+PROVIDE ( SPILock = 0x400048a8 );
+PROVIDE ( SPIParamCfg = 0x40004c2c );
+PROVIDE ( SPIRead = 0x40004b1c );
+PROVIDE ( SPIReadModeCnfig = 0x400048ec );
+PROVIDE ( SPIUnlock = 0x40004878 );
+PROVIDE ( SPIWrite = 0x40004a4c );
+PROVIDE ( SelectSpiFunction = 0x40003f58 );
+PROVIDE ( SendMsg = 0x40003cf4 );
+PROVIDE ( UartConnCheck = 0x40003230 );
+PROVIDE ( UartConnectProc = 0x400037a0 );
+PROVIDE ( UartDwnLdProc = 0x40003368 );
+PROVIDE ( UartGetCmdLn = 0x40003ef4 );
+PROVIDE ( UartRegReadProc = 0x4000381c );
+PROVIDE ( UartRegWriteProc = 0x400037ac );
+PROVIDE ( UartRxString = 0x40003c30 );
+PROVIDE ( Uart_Init = 0x40003a14 );
+PROVIDE ( _DebugExceptionVector = 0x40000010 );
+PROVIDE ( _DoubleExceptionVector = 0x40000070 );
+PROVIDE ( _KernelExceptionVector = 0x40000030 );
+PROVIDE ( _NMIExceptionVector = 0x40000020 );
+PROVIDE ( _ResetHandler = 0x400000a4 );
+PROVIDE ( _ResetVector = 0x40000080 );
+PROVIDE ( _UserExceptionVector = 0x40000050 );
+PROVIDE ( __adddf3 = 0x4000c538 );
+PROVIDE ( __addsf3 = 0x4000c180 );
+PROVIDE ( __divdf3 = 0x4000cb94 );
+PROVIDE ( __divdi3 = 0x4000ce60 );
+PROVIDE ( __divsi3 = 0x4000dc88 );
+PROVIDE ( __extendsfdf2 = 0x4000cdfc );
+PROVIDE ( __fixdfsi = 0x4000ccb8 );
+PROVIDE ( __fixunsdfsi = 0x4000cd00 );
+PROVIDE ( __fixunssfsi = 0x4000c4c4 );
+PROVIDE ( __floatsidf = 0x4000e2f0 );
+PROVIDE ( __floatsisf = 0x4000e2ac );
+PROVIDE ( __floatunsidf = 0x4000e2e8 );
+PROVIDE ( __floatunsisf = 0x4000e2a4 );
+PROVIDE ( __muldf3 = 0x4000c8f0 );
+PROVIDE ( __muldi3 = 0x40000650 );
+PROVIDE ( __mulsf3 = 0x4000c3dc );
+PROVIDE ( __subdf3 = 0x4000c688 );
+PROVIDE ( __subsf3 = 0x4000c268 );
+PROVIDE ( __truncdfsf2 = 0x4000cd5c );
+PROVIDE ( __udivdi3 = 0x4000d310 );
+PROVIDE ( __udivsi3 = 0x4000e21c );
+PROVIDE ( __umoddi3 = 0x4000d770 );
+PROVIDE ( __umodsi3 = 0x4000e268 );
+PROVIDE ( __umulsidi3 = 0x4000dcf0 );
+PROVIDE ( _rom_store = 0x4000e388 );
+PROVIDE ( _rom_store_table = 0x4000e328 );
+PROVIDE ( _start = 0x4000042c );
+PROVIDE ( _xtos_alloca_handler = 0x4000dbe0 );
+PROVIDE ( _xtos_c_wrapper_handler = 0x40000598 );
+PROVIDE ( _xtos_cause3_handler = 0x40000590 );
+PROVIDE ( _xtos_ints_off = 0x4000bda4 );
+PROVIDE ( _xtos_ints_on = 0x4000bd84 );
+PROVIDE ( _xtos_l1int_handler = 0x4000048c );
+PROVIDE ( _xtos_p_none = 0x4000dbf8 );
+PROVIDE ( _xtos_restore_intlevel = 0x4000056c );
+PROVIDE ( _xtos_return_from_exc = 0x4000dc54 );
+PROVIDE ( _xtos_set_exception_handler = 0x40000454 );
+PROVIDE ( _xtos_set_interrupt_handler = 0x4000bd70 );
+PROVIDE ( _xtos_set_interrupt_handler_arg = 0x4000bd28 );
+PROVIDE ( _xtos_set_intlevel = 0x4000dbfc );
+PROVIDE ( _xtos_set_min_intlevel = 0x4000dc18 );
+PROVIDE ( _xtos_set_vpri = 0x40000574 );
+PROVIDE ( _xtos_syscall_handler = 0x4000dbe4 );
+PROVIDE ( _xtos_unhandled_exception = 0x4000dc44 );
+PROVIDE ( _xtos_unhandled_interrupt = 0x4000dc3c );
+PROVIDE ( aes_decrypt = 0x400092d4 );
+PROVIDE ( aes_decrypt_deinit = 0x400092e4 );
+PROVIDE ( aes_decrypt_init = 0x40008ea4 );
+PROVIDE ( aes_unwrap = 0x40009410 );
+PROVIDE ( base64_decode = 0x40009648 );
+PROVIDE ( base64_encode = 0x400094fc );
+PROVIDE ( bzero = 0x4000de84 );
+PROVIDE ( cmd_parse = 0x40000814 );
+PROVIDE ( conv_str_decimal = 0x40000b24 );
+PROVIDE ( conv_str_hex = 0x40000cb8 );
+PROVIDE ( convert_para_str = 0x40000a60 );
+PROVIDE ( dtm_get_intr_mask = 0x400026d0 );
+PROVIDE ( dtm_params_init = 0x4000269c );
+PROVIDE ( dtm_set_intr_mask = 0x400026c8 );
+PROVIDE ( dtm_set_params = 0x400026dc );
+PROVIDE ( eprintf = 0x40001d14 );
+PROVIDE ( eprintf_init_buf = 0x40001cb8 );
+PROVIDE ( eprintf_to_host = 0x40001d48 );
+PROVIDE ( est_get_printf_buf_remain_len = 0x40002494 );
+PROVIDE ( est_reset_printf_buf_len = 0x4000249c );
+PROVIDE ( ets_bzero = 0x40002ae8 );
+PROVIDE ( ets_char2xdigit = 0x40002b74 );
+PROVIDE ( ets_delay_us = 0x40002ecc );
+PROVIDE ( ets_enter_sleep = 0x400027b8 );
+PROVIDE ( ets_external_printf = 0x40002578 );
+PROVIDE ( ets_get_cpu_frequency = 0x40002f0c );
+PROVIDE ( ets_getc = 0x40002bcc );
+PROVIDE ( ets_install_external_printf = 0x40002450 );
+PROVIDE ( ets_install_putc1 = 0x4000242c );
+PROVIDE ( ets_install_putc2 = 0x4000248c );
+PROVIDE ( ets_install_uart_printf = 0x40002438 );
+PROVIDE ( ets_intr_lock = 0x40000f74 );
+PROVIDE ( ets_intr_unlock = 0x40000f80 );
+PROVIDE ( ets_isr_attach = 0x40000f88 );
+PROVIDE ( ets_isr_mask = 0x40000f98 );
+PROVIDE ( ets_isr_unmask = 0x40000fa8 );
+PROVIDE ( ets_memcmp = 0x400018d4 );
+PROVIDE ( ets_memcpy = 0x400018b4 );
+PROVIDE ( ets_memmove = 0x400018c4 );
+PROVIDE ( ets_memset = 0x400018a4 );
+PROVIDE ( ets_post = 0x40000e24 );
+PROVIDE ( ets_printf = 0x400024cc );
+PROVIDE ( ets_putc = 0x40002be8 );
+PROVIDE ( ets_rtc_int_register = 0x40002a40 );
+PROVIDE ( ets_run = 0x40000e04 );
+PROVIDE ( ets_set_idle_cb = 0x40000dc0 );
+PROVIDE ( ets_set_user_start = 0x40000fbc );
+PROVIDE ( ets_str2macaddr = 0x40002af8 );
+PROVIDE ( ets_strcmp = 0x40002aa8 );
+PROVIDE ( ets_strcpy = 0x40002a88 );
+PROVIDE ( ets_strlen = 0x40002ac8 );
+PROVIDE ( ets_strncmp = 0x40002ab8 );
+PROVIDE ( ets_strncpy = 0x40002a98 );
+PROVIDE ( ets_strstr = 0x40002ad8 );
+PROVIDE ( ets_task = 0x40000dd0 );
+PROVIDE ( ets_timer_arm = 0x40002cc4 );
+PROVIDE ( ets_timer_disarm = 0x40002d40 );
+PROVIDE ( ets_timer_done = 0x40002d80 );
+PROVIDE ( ets_timer_handler_isr = 0x40002da8 );
+PROVIDE ( ets_timer_init = 0x40002e68 );
+PROVIDE ( ets_timer_setfn = 0x40002c48 );
+PROVIDE ( ets_uart_printf = 0x40002544 );
+PROVIDE ( ets_update_cpu_frequency = 0x40002f04 );
+PROVIDE ( ets_vprintf = 0x40001f00 );
+PROVIDE ( ets_wdt_disable = 0x400030f0 );
+PROVIDE ( ets_wdt_enable = 0x40002fa0 );
+PROVIDE ( ets_wdt_get_mode = 0x40002f34 );
+PROVIDE ( ets_wdt_init = 0x40003170 );
+PROVIDE ( ets_wdt_restore = 0x40003158 );
+PROVIDE ( ets_write_char = 0x40001da0 );
+PROVIDE ( get_first_seg = 0x4000091c );
+PROVIDE ( gpio_init = 0x40004c50 );
+PROVIDE ( gpio_input_get = 0x40004cf0 );
+PROVIDE ( gpio_intr_ack = 0x40004dcc );
+PROVIDE ( gpio_intr_handler_register = 0x40004e28 );
+PROVIDE ( gpio_intr_pending = 0x40004d88 );
+PROVIDE ( gpio_intr_test = 0x40004efc );
+PROVIDE ( gpio_output_set = 0x40004cd0 );
+PROVIDE ( gpio_pin_intr_state_set = 0x40004d90 );
+PROVIDE ( gpio_pin_wakeup_disable = 0x40004ed4 );
+PROVIDE ( gpio_pin_wakeup_enable = 0x40004e90 );
+PROVIDE ( gpio_register_get = 0x40004d5c );
+PROVIDE ( gpio_register_set = 0x40004d04 );
+PROVIDE ( hmac_md5 = 0x4000a2cc );
+PROVIDE ( hmac_md5_vector = 0x4000a160 );
+PROVIDE ( hmac_sha1 = 0x4000ba28 );
+PROVIDE ( hmac_sha1_vector = 0x4000b8b4 );
+PROVIDE ( lldesc_build_chain = 0x40004f40 );
+PROVIDE ( lldesc_num2link = 0x40005050 );
+PROVIDE ( lldesc_set_owner = 0x4000507c );
+PROVIDE ( main = 0x40000fec );
+PROVIDE ( md5_vector = 0x400097ac );
+PROVIDE ( mem_calloc = 0x40001c2c );
+PROVIDE ( mem_free = 0x400019e0 );
+PROVIDE ( mem_init = 0x40001998 );
+PROVIDE ( mem_malloc = 0x40001b40 );
+PROVIDE ( mem_realloc = 0x40001c6c );
+PROVIDE ( mem_trim = 0x40001a14 );
+PROVIDE ( mem_zalloc = 0x40001c58 );
+PROVIDE ( memcmp = 0x4000dea8 );
+PROVIDE ( memcpy = 0x4000df48 );
+PROVIDE ( memmove = 0x4000e04c );
+PROVIDE ( memset = 0x4000e190 );
+PROVIDE ( multofup = 0x400031c0 );
+PROVIDE ( pbkdf2_sha1 = 0x4000b840 );
+PROVIDE ( phy_get_romfuncs = 0x40006b08 );
+PROVIDE ( rand = 0x40000600 );
+PROVIDE ( rc4_skip = 0x4000dd68 );
+PROVIDE ( recv_packet = 0x40003d08 );
+PROVIDE ( remove_head_space = 0x40000a04 );
+PROVIDE ( rijndaelKeySetupDec = 0x40008dd0 );
+PROVIDE ( rijndaelKeySetupEnc = 0x40009300 );
+PROVIDE ( rom_abs_temp = 0x400060c0 );
+PROVIDE ( rom_ana_inf_gating_en = 0x40006b10 );
+PROVIDE ( rom_cal_tos_v50 = 0x40007a28 );
+PROVIDE ( rom_chip_50_set_channel = 0x40006f84 );
+PROVIDE ( rom_chip_v5_disable_cca = 0x400060d0 );
+PROVIDE ( rom_chip_v5_enable_cca = 0x400060ec );
+PROVIDE ( rom_chip_v5_rx_init = 0x4000711c );
+PROVIDE ( rom_chip_v5_sense_backoff = 0x4000610c );
+PROVIDE ( rom_chip_v5_tx_init = 0x4000718c );
+PROVIDE ( rom_dc_iq_est = 0x4000615c );
+PROVIDE ( rom_en_pwdet = 0x400061b8 );
+PROVIDE ( rom_get_bb_atten = 0x40006238 );
+PROVIDE ( rom_get_corr_power = 0x40006260 );
+PROVIDE ( rom_get_fm_sar_dout = 0x400062dc );
+PROVIDE ( rom_get_noisefloor = 0x40006394 );
+PROVIDE ( rom_get_power_db = 0x400063b0 );
+PROVIDE ( rom_i2c_readReg = 0x40007268 );
+PROVIDE ( rom_i2c_readReg_Mask = 0x4000729c );
+PROVIDE ( rom_i2c_writeReg = 0x400072d8 );
+PROVIDE ( rom_i2c_writeReg_Mask = 0x4000730c );
+PROVIDE ( rom_iq_est_disable = 0x40006400 );
+PROVIDE ( rom_iq_est_enable = 0x40006430 );
+PROVIDE ( rom_linear_to_db = 0x40006484 );
+PROVIDE ( rom_mhz2ieee = 0x400065a4 );
+PROVIDE ( rom_pbus_dco___SA2 = 0x40007bf0 );
+PROVIDE ( rom_pbus_debugmode = 0x4000737c );
+PROVIDE ( rom_pbus_enter_debugmode = 0x40007410 );
+PROVIDE ( rom_pbus_exit_debugmode = 0x40007448 );
+PROVIDE ( rom_pbus_force_test = 0x4000747c );
+PROVIDE ( rom_pbus_rd = 0x400074d8 );
+PROVIDE ( rom_pbus_set_rxgain = 0x4000754c );
+PROVIDE ( rom_pbus_set_txgain = 0x40007610 );
+PROVIDE ( rom_pbus_workmode = 0x40007648 );
+PROVIDE ( rom_pbus_xpd_rx_off = 0x40007688 );
+PROVIDE ( rom_pbus_xpd_rx_on = 0x400076cc );
+PROVIDE ( rom_pbus_xpd_tx_off = 0x400076fc );
+PROVIDE ( rom_pbus_xpd_tx_on = 0x40007740 );
+PROVIDE ( rom_pbus_xpd_tx_on__low_gain = 0x400077a0 );
+PROVIDE ( rom_phy_reset_req = 0x40007804 );
+PROVIDE ( rom_restart_cal = 0x4000781c );
+PROVIDE ( rom_rfcal_pwrctrl = 0x40007eb4 );
+PROVIDE ( rom_rfcal_rxiq = 0x4000804c );
+PROVIDE ( rom_rfcal_rxiq_set_reg = 0x40008264 );
+PROVIDE ( rom_rfcal_txcap = 0x40008388 );
+PROVIDE ( rom_rfcal_txiq = 0x40008610 );
+PROVIDE ( rom_rfcal_txiq_cover = 0x400088b8 );
+PROVIDE ( rom_rfcal_txiq_set_reg = 0x40008a70 );
+PROVIDE ( rom_rfpll_reset = 0x40007868 );
+PROVIDE ( rom_rfpll_set_freq = 0x40007968 );
+PROVIDE ( rom_rxiq_cover_mg_mp = 0x40008b6c );
+PROVIDE ( rom_rxiq_get_mis = 0x40006628 );
+PROVIDE ( rom_sar_init = 0x40006738 );
+PROVIDE ( rom_set_ana_inf_tx_scale = 0x4000678c );
+PROVIDE ( rom_set_channel_freq = 0x40006c50 );
+PROVIDE ( rom_set_loopback_gain = 0x400067c8 );
+PROVIDE ( rom_set_noise_floor = 0x40006830 );
+PROVIDE ( rom_set_rxclk_en = 0x40006550 );
+PROVIDE ( rom_set_txbb_atten = 0x40008c6c );
+PROVIDE ( rom_set_txclk_en = 0x4000650c );
+PROVIDE ( rom_set_txiq_cal = 0x40008d34 );
+PROVIDE ( rom_start_noisefloor = 0x40006874 );
+PROVIDE ( rom_start_tx_tone = 0x400068b4 );
+PROVIDE ( rom_stop_tx_tone = 0x4000698c );
+PROVIDE ( rom_tx_mac_disable = 0x40006a98 );
+PROVIDE ( rom_tx_mac_enable = 0x40006ad4 );
+PROVIDE ( rom_txtone_linear_pwr = 0x40006a1c );
+PROVIDE ( rom_write_rfpll_sdm = 0x400078dc );
+PROVIDE ( roundup2 = 0x400031b4 );
+PROVIDE ( rtc_enter_sleep = 0x40002870 );
+PROVIDE ( rtc_get_reset_reason = 0x400025e0 );
+PROVIDE ( rtc_intr_handler = 0x400029ec );
+PROVIDE ( rtc_set_sleep_mode = 0x40002668 );
+PROVIDE ( save_rxbcn_mactime = 0x400027a4 );
+PROVIDE ( save_tsf_us = 0x400027ac );
+PROVIDE ( send_packet = 0x40003c80 );
+PROVIDE ( sha1_prf = 0x4000ba48 );
+PROVIDE ( sha1_vector = 0x4000a2ec );
+PROVIDE ( sip_alloc_to_host_evt = 0x40005180 );
+PROVIDE ( sip_get_ptr = 0x400058a8 );
+PROVIDE ( sip_get_state = 0x40005668 );
+PROVIDE ( sip_init_attach = 0x4000567c );
+PROVIDE ( sip_install_rx_ctrl_cb = 0x4000544c );
+PROVIDE ( sip_install_rx_data_cb = 0x4000545c );
+PROVIDE ( sip_post = 0x400050fc );
+PROVIDE ( sip_post_init = 0x400056c4 );
+PROVIDE ( sip_reclaim_from_host_cmd = 0x4000534c );
+PROVIDE ( sip_reclaim_tx_data_pkt = 0x400052c0 );
+PROVIDE ( sip_send = 0x40005808 );
+PROVIDE ( sip_to_host_chain_append = 0x40005864 );
+PROVIDE ( sip_to_host_evt_send_done = 0x40005234 );
+PROVIDE ( slc_add_credits = 0x400060ac );
+PROVIDE ( slc_enable = 0x40005d90 );
+PROVIDE ( slc_from_host_chain_fetch = 0x40005f24 );
+PROVIDE ( slc_from_host_chain_recycle = 0x40005e94 );
+PROVIDE ( slc_init_attach = 0x40005c50 );
+PROVIDE ( slc_init_credit = 0x4000608c );
+PROVIDE ( slc_pause_from_host = 0x40006014 );
+PROVIDE ( slc_reattach = 0x40005c1c );
+PROVIDE ( slc_resume_from_host = 0x4000603c );
+PROVIDE ( slc_select_tohost_gpio = 0x40005dc0 );
+PROVIDE ( slc_select_tohost_gpio_mode = 0x40005db8 );
+PROVIDE ( slc_send_to_host_chain = 0x40005de4 );
+PROVIDE ( slc_set_host_io_max_window = 0x40006068 );
+PROVIDE ( slc_to_host_chain_recycle = 0x40005f10 );
+PROVIDE ( software_reset = 0x4000264c );
+PROVIDE ( spi_flash_attach = 0x40004644 );
+PROVIDE ( srand = 0x400005f0 );
+PROVIDE ( strcmp = 0x4000bdc8 );
+PROVIDE ( strcpy = 0x4000bec8 );
+PROVIDE ( strlen = 0x4000bf4c );
+PROVIDE ( strncmp = 0x4000bfa8 );
+PROVIDE ( strncpy = 0x4000c0a0 );
+PROVIDE ( strstr = 0x4000e1e0 );
+PROVIDE ( timer_insert = 0x40002c64 );
+PROVIDE ( uartAttach = 0x4000383c );
+PROVIDE ( uart_baudrate_detect = 0x40003924 );
+PROVIDE ( uart_buff_switch = 0x400038a4 );
+PROVIDE ( uart_div_modify = 0x400039d8 );
+PROVIDE ( uart_rx_intr_handler = 0x40003bbc );
+PROVIDE ( uart_rx_one_char = 0x40003b8c );
+PROVIDE ( uart_rx_one_char_block = 0x40003b64 );
+PROVIDE ( uart_rx_readbuff = 0x40003ec8 );
+PROVIDE ( uart_tx_one_char = 0x40003b30 );
+PROVIDE ( wepkey_128 = 0x4000bc40 );
+PROVIDE ( wepkey_64 = 0x4000bb3c );
+PROVIDE ( xthal_bcopy = 0x40000688 );
+PROVIDE ( xthal_copy123 = 0x4000074c );
+PROVIDE ( xthal_get_ccompare = 0x4000dd4c );
+PROVIDE ( xthal_get_ccount = 0x4000dd38 );
+PROVIDE ( xthal_get_interrupt = 0x4000dd58 );
+PROVIDE ( xthal_get_intread = 0x4000dd58 );
+PROVIDE ( xthal_memcpy = 0x400006c4 );
+PROVIDE ( xthal_set_ccompare = 0x4000dd40 );
+PROVIDE ( xthal_set_intclear = 0x4000dd60 );
+PROVIDE ( xthal_spill_registers_into_stack_nw = 0x4000e320 );
+PROVIDE ( xthal_window_spill = 0x4000e324 );
+PROVIDE ( xthal_window_spill_nw = 0x4000e320 );
+
+PROVIDE ( Te0 = 0x3fffccf0 );
+PROVIDE ( UartDev = 0x3fffde10 );
+PROVIDE ( flashchip = 0x3fffc714);

esp8266/esp8266.ld

@@ -0,0 +1,192 @@
+/* GNU linker script for ESP8266 */
+
+MEMORY
+{
+    dport0_0_seg : org = 0x3ff00000, len = 0x10
+    dram0_0_seg :  org = 0x3ffe8000, len = 0x14000
+    iram1_0_seg :  org = 0x40100000, len = 0x8000
+    irom0_0_seg :  org = 0x40210000, len = 0x40000
+}
+
+/* define the top of RAM */
+_heap_end = ORIGIN(dram0_0_seg) + LENGTH(dram0_0_seg);
+
+PHDRS
+{
+    dport0_0_phdr PT_LOAD;
+    dram0_0_phdr PT_LOAD;
+    dram0_0_bss_phdr PT_LOAD;
+    iram1_0_phdr PT_LOAD;
+    irom0_0_phdr PT_LOAD;
+}
+
+ENTRY(call_user_start)
+
+PROVIDE(_memmap_vecbase_reset = 0x40000000);
+
+/* Various memory-map dependent cache attribute settings: */
+_memmap_cacheattr_wb_base = 0x00000110;
+_memmap_cacheattr_wt_base = 0x00000110;
+_memmap_cacheattr_bp_base = 0x00000220;
+_memmap_cacheattr_unused_mask = 0xFFFFF00F;
+_memmap_cacheattr_wb_trapnull = 0x2222211F;
+_memmap_cacheattr_wba_trapnull = 0x2222211F;
+_memmap_cacheattr_wbna_trapnull = 0x2222211F;
+_memmap_cacheattr_wt_trapnull = 0x2222211F;
+_memmap_cacheattr_bp_trapnull = 0x2222222F;
+_memmap_cacheattr_wb_strict = 0xFFFFF11F;
+_memmap_cacheattr_wt_strict = 0xFFFFF11F;
+_memmap_cacheattr_bp_strict = 0xFFFFF22F;
+_memmap_cacheattr_wb_allvalid = 0x22222112;
+_memmap_cacheattr_wt_allvalid = 0x22222112;
+_memmap_cacheattr_bp_allvalid = 0x22222222;
+PROVIDE(_memmap_cacheattr_reset = _memmap_cacheattr_wb_trapnull);
+
+SECTIONS
+{
+
+    .dport0.rodata : ALIGN(4)
+    {
+        _dport0_rodata_start = ABSOLUTE(.);
+        *(.dport0.rodata)
+        *(.dport.rodata)
+        _dport0_rodata_end = ABSOLUTE(.);
+    } >dport0_0_seg :dport0_0_phdr
+
+    .dport0.literal : ALIGN(4)
+    {
+        _dport0_literal_start = ABSOLUTE(.);
+        *(.dport0.literal)
+        *(.dport.literal)
+        _dport0_literal_end = ABSOLUTE(.);
+    } >dport0_0_seg :dport0_0_phdr
+
+    .dport0.data : ALIGN(4)
+    {
+        _dport0_data_start = ABSOLUTE(.);
+        *(.dport0.data)
+        *(.dport.data)
+        _dport0_data_end = ABSOLUTE(.);
+    } >dport0_0_seg :dport0_0_phdr
+
+    .irom0.text : ALIGN(4)
+    {
+        _irom0_text_start = ABSOLUTE(.);
+        *(.irom0.literal .irom.literal .irom.text.literal .irom0.text .irom.text)
+        *py*.o*(.literal* .text*)
+        *gccollect.o*(.literal* .text*)
+        *gchelper.o*(.literal* .text*)
+        _irom0_text_end = ABSOLUTE(.);
+    } >irom0_0_seg :irom0_0_phdr
+
+    .text : ALIGN(4)
+    {
+        _stext = .;
+        _text_start = ABSOLUTE(.);
+        *(.entry.text)
+        *(.init.literal)
+        *(.init)
+        *(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
+        *(.fini.literal)
+        *(.fini)
+        *(.gnu.version)
+        *qstr.o(.rodata.const_pool)
+        *.o(.rodata.mp_type_*)
+        /*
+        can't put these here for some reason...
+        *builtin.o(.rodata.mp_builtin_*_obj)
+        *parse.o(.rodata.rule_*)
+        */
+        _text_end = ABSOLUTE(.);
+        _etext = .;
+    } >iram1_0_seg :iram1_0_phdr
+
+    .lit4 : ALIGN(4)
+    {
+        _lit4_start = ABSOLUTE(.);
+        *(*.lit4)
+        *(.lit4.*)
+        *(.gnu.linkonce.lit4.*)
+        _lit4_end = ABSOLUTE(.);
+    } >iram1_0_seg :iram1_0_phdr
+
+    .data : ALIGN(4)
+    {
+        _data_start = ABSOLUTE(.);
+        *(.data)
+        *(.data.*)
+        *(.gnu.linkonce.d.*)
+        *(.data1)
+        *(.sdata)
+        *(.sdata.*)
+        *(.gnu.linkonce.s.*)
+        *(.sdata2)
+        *(.sdata2.*)
+        *(.gnu.linkonce.s2.*)
+        *(.jcr)
+        _data_end = ABSOLUTE(.);
+    } >dram0_0_seg :dram0_0_phdr
+
+    .rodata : ALIGN(4)
+    {
+        _rodata_start = ABSOLUTE(.);
+        *(.rodata)
+        *(.rodata.*)
+        *(.gnu.linkonce.r.*)
+        *(.rodata1)
+        __XT_EXCEPTION_TABLE__ = ABSOLUTE(.);
+        *(.xt_except_table)
+        *(.gcc_except_table)
+        *(.gnu.linkonce.e.*)
+        *(.gnu.version_r)
+        *(.eh_frame)
+        /*  C++ constructor and destructor tables, properly ordered:  */
+        KEEP (*crtbegin.o(.ctors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+        KEEP (*(SORT(.ctors.*)))
+        KEEP (*(.ctors))
+        KEEP (*crtbegin.o(.dtors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+        KEEP (*(SORT(.dtors.*)))
+        KEEP (*(.dtors))
+        /*  C++ exception handlers table:  */
+        __XT_EXCEPTION_DESCS__ = ABSOLUTE(.);
+        *(.xt_except_desc)
+        *(.gnu.linkonce.h.*)
+        __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
+        *(.xt_except_desc_end)
+        *(.dynamic)
+        *(.gnu.version_d)
+        . = ALIGN(4);        /* this table MUST be 4-byte aligned */
+        _bss_table_start = ABSOLUTE(.);
+        LONG(_bss_start)
+        LONG(_bss_end)
+        _bss_table_end = ABSOLUTE(.);
+        _rodata_end = ABSOLUTE(.);
+    } >dram0_0_seg :dram0_0_phdr
+
+    .bss ALIGN(8) (NOLOAD) : ALIGN(4)
+    {
+        . = ALIGN (8);
+        _bss_start = ABSOLUTE(.);
+        *(.dynsbss)
+        *(.sbss)
+        *(.sbss.*)
+        *(.gnu.linkonce.sb.*)
+        *(.scommon)
+        *(.sbss2)
+        *(.sbss2.*)
+        *(.gnu.linkonce.sb2.*)
+        *(.dynbss)
+        *(.bss)
+        *(.bss.*)
+        *(.gnu.linkonce.b.*)
+        *(COMMON)
+        . = ALIGN (8);
+        _bss_end = ABSOLUTE(.);
+        _heap_start = ABSOLUTE(.);
+    } >dram0_0_seg :dram0_0_bss_phdr
+}
+
+/* get ROM code address */
+INCLUDE "eagle.rom.addr.v6.ld"

esp8266/esp_mphal.c

@@ -0,0 +1,92 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdio.h>
+#include "ets_sys.h"
+#include "etshal.h"
+#include "uart.h"
+#include "esp_mphal.h"
+
+extern void ets_wdt_disable(void);
+extern void wdt_feed(void);
+extern void ets_delay_us();
+
+void mp_hal_init(void) {
+    ets_wdt_disable(); // it's a pain while developing
+    uart_init(UART_BIT_RATE_115200, UART_BIT_RATE_115200);
+}
+
+void mp_hal_feed_watchdog(void) {
+    //ets_wdt_disable(); // it's a pain while developing
+    //WRITE_PERI_REG(0x60000914, 0x73);
+    //wdt_feed(); // might also work
+}
+
+void mp_hal_udelay(uint32_t us) {
+    ets_delay_us(us);
+}
+
+int mp_hal_uart0_rx_chr(void) {
+    return uart0_rx();
+}
+
+void mp_hal_uart0_write_str(const char *str) {
+    while (*str) {
+        uart_tx_one_char(UART0, *str++);
+    }
+}
+
+void mp_hal_uart0_write_strn(const char *str, uint32_t len) {
+    while (len--) {
+        uart_tx_one_char(UART0, *str++);
+    }
+}
+
+void mp_hal_uart0_write_strn_cooked(const char *str, uint32_t len) {
+    while (len--) {
+        if (*str == '\n') {
+            uart_tx_one_char(UART0, '\r');
+        }
+        uart_tx_one_char(UART0, *str++);
+    }
+}
+
+uint32_t HAL_GetTick(void) {
+    // TODO
+    return 0;
+}
+
+void HAL_Delay(uint32_t Delay) {
+    mp_hal_udelay(Delay * 1000);
+}
+
+void mp_hal_set_interrupt_char(int c) {
+    // TODO
+}
+
+uint32_t mp_hal_get_cpu_freq(void) {
+    return ets_get_cpu_frequency();
+}

esp8266/esp_mphal.h

@@ -0,0 +1,43 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _INCLUDED_MPHAL_H_
+#define _INCLUDED_MPHAL_H_
+
+void mp_hal_init(void);
+void mp_hal_feed_watchdog(void);
+void mp_hal_udelay(uint32_t);
+int mp_hal_uart0_rx_chr(void);
+void mp_hal_uart0_write_str(const char *str);
+void mp_hal_uart0_write_strn(const char *str, uint32_t len);
+void mp_hal_uart0_write_strn_cooked(const char *str, uint32_t len);
+
+uint32_t HAL_GetTick(void);
+void HAL_Delay(uint32_t Delay);
+void mp_hal_set_interrupt_char(int c);
+uint32_t mp_hal_get_cpu_freq(void);
+
+#endif // _INCLUDED_MPHAL_H_

esp8266/etshal.h

@@ -0,0 +1,10 @@
+#ifndef _INCLUDED_ETSHAL_H_
+#define _INCLUDED_ETSHAL_H_
+
+void ets_isr_unmask();
+void ets_install_putc1();
+void ets_isr_attach();
+void uart_div_modify();
+uint32_t ets_get_cpu_frequency();
+
+#endif // _INCLUDED_ETSHAL_H_

esp8266/gccollect.c

@@ -0,0 +1,65 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+
+#include "mpconfig.h"
+#include "misc.h"
+#include "qstr.h"
+#include "obj.h"
+#include "gc.h"
+#include "gccollect.h"
+
+STATIC uint32_t stack_end;
+
+mp_uint_t gc_helper_get_regs_and_sp(mp_uint_t *regs);
+
+void gc_collect_init(void) {
+    mp_uint_t regs[8];
+    mp_uint_t sp = gc_helper_get_regs_and_sp(regs);
+    stack_end = sp;
+    //printf("stack=%p ram_end=%p %d\n", stack_end, &_ram_end);
+}
+
+void gc_collect(void) {
+    // start the GC
+    gc_collect_start();
+
+    // We need to scan everything in RAM that can hold a pointer.
+    // The data segment is used, but should not contain pointers, so we just scan the bss.
+    gc_collect_root((void**)&_bss_start, ((uint32_t)&_bss_end - (uint32_t)&_bss_start) / sizeof(uint32_t));
+
+    // get the registers and the sp
+    mp_uint_t regs[8];
+    mp_uint_t sp = gc_helper_get_regs_and_sp(regs);
+
+    // trace the stack, including the registers (since they live on the stack in this function)
+    gc_collect_root((void**)sp, (stack_end - sp) / sizeof(uint32_t));
+
+    // end the GC
+    gc_collect_end();
+}

esp8266/gccollect.h

@@ -0,0 +1,41 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+extern uint32_t _text_start;
+extern uint32_t _text_end;
+extern uint32_t _irom0_text_start;
+extern uint32_t _irom0_text_end;
+extern uint32_t _data_start;
+extern uint32_t _data_end;
+extern uint32_t _rodata_start;
+extern uint32_t _rodata_end;
+extern uint32_t _bss_start;
+extern uint32_t _bss_end;
+extern uint32_t _heap_start;
+extern uint32_t _heap_end;
+
+void gc_collect_init(void);
+void gc_collect(void);

esp8266/gchelper.s

@@ -0,0 +1,22 @@
+    .file   "gchelper.s"
+    .text
+
+    .align  4
+    .global gc_helper_get_regs_and_sp
+    .type   gc_helper_get_regs_and_sp, @function
+gc_helper_get_regs_and_sp:
+    # store regs into given array
+    s32i.n  a8, a2, 0
+    s32i.n  a9, a2, 4
+    s32i.n  a10, a2, 8
+    s32i.n  a11, a2, 12
+    s32i.n  a12, a2, 16
+    s32i.n  a13, a2, 20
+    s32i.n  a14, a2, 24
+    s32i.n  a15, a2, 28
+
+    # return the sp
+    mov     a2, a1
+    ret.n
+
+    .size   gc_helper_get_regs_and_sp, .-gc_helper_get_regs_and_sp

esp8266/main.c

@@ -0,0 +1,97 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+#include "mpconfig.h"
+#include "nlr.h"
+#include "misc.h"
+#include "qstr.h"
+#include "lexer.h"
+#include "parse.h"
+#include "obj.h"
+#include "parsehelper.h"
+#include "compile.h"
+#include "runtime0.h"
+#include "runtime.h"
+#include "gc.h"
+#include "pyexec.h"
+#include "gccollect.h"
+#include MICROPY_HAL_H
+
+void user_init(void) {
+soft_reset:
+    //mp_stack_set_limit((char*)&_ram_end - (char*)&_heap_end - 1024);
+    mp_hal_init();
+    gc_init(&_heap_start, &_heap_end);
+    gc_collect_init();
+    mp_init();
+    mp_obj_list_init(mp_sys_path, 0);
+    mp_obj_list_init(mp_sys_argv, 0);
+
+    printf("\n");
+
+    for (;;) {
+        if (pyexec_mode_kind == PYEXEC_MODE_RAW_REPL) {
+            if (pyexec_raw_repl() != 0) {
+                break;
+            }
+        } else {
+            if (pyexec_friendly_repl() != 0) {
+                break;
+            }
+        }
+    }
+
+    goto soft_reset;
+}
+
+mp_lexer_t *mp_lexer_new_from_file(const char *filename) {
+    return NULL;
+}
+
+mp_import_stat_t mp_import_stat(const char *path) {
+    return MP_IMPORT_STAT_NO_EXIST;
+}
+
+mp_obj_t mp_builtin_open(uint n_args, const mp_obj_t *args, mp_map_t *kwargs) {
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_KW(mp_builtin_open_obj, 1, mp_builtin_open);
+
+void nlr_jump_fail(void *val) {
+    printf("NLR jump failed\n");
+    for (;;) {
+    }
+}
+
+//void __assert(const char *file, int line, const char *func, const char *expr) {
+void __assert(const char *file, int line, const char *expr) {
+    printf("Assertion '%s' failed, at file %s:%d\n", expr, file, line);
+    for (;;) {
+    }
+}

esp8266/makeimg.py

@@ -0,0 +1,21 @@
+import sys
+
+assert len(sys.argv) == 4
+
+with open(sys.argv[3], 'wb') as fout:
+
+    with open(sys.argv[1], 'rb') as f:
+        data_flash = f.read()
+        fout.write(data_flash)
+        print('flash    ', len(data_flash))
+
+    pad = b'\xff' * (0x10000 - len(data_flash))
+    fout.write(pad)
+    print('padding  ', len(pad))
+
+    with open(sys.argv[2], 'rb') as f:
+        data_rom = f.read()
+        fout.write(data_rom)
+        print('irom0text', len(data_rom))
+
+    print('total    ', 0x10000 + len(data_rom))

esp8266/modpyb.c

@@ -0,0 +1,173 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+
+#include "mpconfig.h"
+#include "misc.h"
+#include "nlr.h"
+#include "qstr.h"
+#include "obj.h"
+#include "gc.h"
+#include "gccollect.h"
+#include "pyexec.h"
+#include "pybstdio.h"
+#include MICROPY_HAL_H
+
+STATIC mp_obj_t pyb_info(mp_uint_t n_args, const mp_obj_t *args) {
+    // print info about memory
+    {
+        printf("_text_start=%p\n", &_text_start);
+        printf("_text_end=%p\n", &_text_end);
+        printf("_irom0_text_start=%p\n", &_irom0_text_start);
+        printf("_irom0_text_end=%p\n", &_irom0_text_end);
+        printf("_data_start=%p\n", &_data_start);
+        printf("_data_end=%p\n", &_data_end);
+        printf("_rodata_start=%p\n", &_rodata_start);
+        printf("_rodata_end=%p\n", &_rodata_end);
+        printf("_bss_start=%p\n", &_bss_start);
+        printf("_bss_end=%p\n", &_bss_end);
+        printf("_heap_start=%p\n", &_heap_start);
+        printf("_heap_end=%p\n", &_heap_end);
+    }
+
+    // qstr info
+    {
+        mp_uint_t n_pool, n_qstr, n_str_data_bytes, n_total_bytes;
+        qstr_pool_info(&n_pool, &n_qstr, &n_str_data_bytes, &n_total_bytes);
+        printf("qstr:\n  n_pool=" UINT_FMT "\n  n_qstr=" UINT_FMT "\n  n_str_data_bytes=" UINT_FMT "\n  n_total_bytes=" UINT_FMT "\n", n_pool, n_qstr, n_str_data_bytes, n_total_bytes);
+    }
+
+    // GC info
+    {
+        gc_info_t info;
+        gc_info(&info);
+        printf("GC:\n");
+        printf("  " UINT_FMT " total\n", info.total);
+        printf("  " UINT_FMT " : " UINT_FMT "\n", info.used, info.free);
+        printf("  1=" UINT_FMT " 2=" UINT_FMT " m=" UINT_FMT "\n", info.num_1block, info.num_2block, info.max_block);
+    }
+
+    if (n_args == 1) {
+        // arg given means dump gc allocation table
+        gc_dump_alloc_table();
+    }
+
+    return mp_const_none;
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pyb_info_obj, 0, 1, pyb_info);
+
+STATIC mp_obj_t pyb_freq(mp_uint_t n_args, const mp_obj_t *args) {
+    if (n_args == 0) {
+        // get
+        return mp_obj_new_int(mp_hal_get_cpu_freq());
+    } else {
+        // set
+        nlr_raise(mp_obj_new_exception_msg(&mp_type_ValueError, "can't change freq"));
+    }
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pyb_freq_obj, 0, 1, pyb_freq);
+
+STATIC mp_obj_t pyb_sync(void) {
+    //storage_flush();
+    return mp_const_none;
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_0(pyb_sync_obj, pyb_sync);
+
+STATIC mp_obj_t pyb_millis(void) {
+    return MP_OBJ_NEW_SMALL_INT(HAL_GetTick());
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_0(pyb_millis_obj, pyb_millis);
+
+STATIC mp_obj_t pyb_elapsed_millis(mp_obj_t start) {
+    uint32_t startMillis = mp_obj_get_int(start);
+    uint32_t currMillis = HAL_GetTick();
+    return MP_OBJ_NEW_SMALL_INT((currMillis - startMillis) & 0x3fffffff);
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_elapsed_millis_obj, pyb_elapsed_millis);
+
+STATIC mp_obj_t pyb_micros(void) {
+    return MP_OBJ_NEW_SMALL_INT(0);
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_0(pyb_micros_obj, pyb_micros);
+
+STATIC mp_obj_t pyb_elapsed_micros(mp_obj_t start) {
+    uint32_t startMicros = mp_obj_get_int(start);
+    uint32_t currMicros = 0;
+    return MP_OBJ_NEW_SMALL_INT((currMicros - startMicros) & 0x3fffffff);
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_elapsed_micros_obj, pyb_elapsed_micros);
+
+STATIC mp_obj_t pyb_delay(mp_obj_t ms_in) {
+    mp_int_t ms = mp_obj_get_int(ms_in);
+    if (ms >= 0) {
+        HAL_Delay(ms);
+    }
+    return mp_const_none;
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_delay_obj, pyb_delay);
+
+STATIC mp_obj_t pyb_udelay(mp_obj_t usec_in) {
+    mp_int_t usec = mp_obj_get_int(usec_in);
+    if (usec >= 0) {
+        mp_hal_udelay(usec);
+    }
+    return mp_const_none;
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_udelay_obj, pyb_udelay);
+
+STATIC const mp_map_elem_t pyb_module_globals_table[] = {
+    { MP_OBJ_NEW_QSTR(MP_QSTR___name__), MP_OBJ_NEW_QSTR(MP_QSTR_pyb) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_info), (mp_obj_t)&pyb_info_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_freq), (mp_obj_t)&pyb_freq_obj },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_millis), (mp_obj_t)&pyb_millis_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_elapsed_millis), (mp_obj_t)&pyb_elapsed_millis_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_micros), (mp_obj_t)&pyb_micros_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_elapsed_micros), (mp_obj_t)&pyb_elapsed_micros_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_delay), (mp_obj_t)&pyb_delay_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_udelay), (mp_obj_t)&pyb_udelay_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_sync), (mp_obj_t)&pyb_sync_obj },
+};
+
+STATIC const mp_obj_dict_t pyb_module_globals = {
+    .base = {&mp_type_dict},
+    .map = {
+        .all_keys_are_qstrs = 1,
+        .table_is_fixed_array = 1,
+        .used = MP_ARRAY_SIZE(pyb_module_globals_table),
+        .alloc = MP_ARRAY_SIZE(pyb_module_globals_table),
+        .table = (mp_map_elem_t*)pyb_module_globals_table,
+    },
+};
+
+const mp_obj_module_t pyb_module = {
+    .base = { &mp_type_module },
+    .name = MP_QSTR_pyb,
+    .globals = (mp_obj_dict_t*)&pyb_module_globals,
+};

esp8266/mpconfigport.h

@@ -0,0 +1,71 @@
+#include <stdint.h>
+
+// options to control how Micro Python is built
+
+#define MICROPY_ALLOC_PATH_MAX      (128)
+#define MICROPY_EMIT_X64            (0)
+#define MICROPY_EMIT_THUMB          (0)
+#define MICROPY_EMIT_INLINE_THUMB   (0)
+#define MICROPY_MEM_STATS           (0)
+#define MICROPY_DEBUG_PRINTERS      (0)
+#define MICROPY_ENABLE_GC           (1)
+#define MICROPY_HELPER_REPL         (1)
+#define MICROPY_HELPER_LEXER_UNIX   (0)
+#define MICROPY_ENABLE_SOURCE_LINE  (1)
+#define MICROPY_PY_BUILTINS_STR_UNICODE (1)
+#define MICROPY_PY_BUILTINS_BYTEARRAY (1)
+#define MICROPY_PY_BUILTINS_MEMORYVIEW (1)
+#define MICROPY_PY_BUILTINS_FROZENSET (1)
+#define MICROPY_PY_BUILTINS_SET     (1)
+#define MICROPY_PY_BUILTINS_SLICE   (1)
+#define MICROPY_PY_BUILTINS_PROPERTY (1)
+#define MICROPY_PY___FILE__         (0)
+#define MICROPY_PY_GC               (1)
+#define MICROPY_PY_ARRAY            (1)
+#define MICROPY_PY_COLLECTIONS      (1)
+#define MICROPY_PY_MATH             (0)
+#define MICROPY_PY_CMATH            (0)
+#define MICROPY_PY_IO               (1)
+#define MICROPY_PY_STRUCT           (1)
+#define MICROPY_PY_SYS              (1)
+#define MICROPY_PY_SYS_EXIT         (1)
+#define MICROPY_PY_SYS_STDFILES     (1)
+#define MICROPY_CPYTHON_COMPAT      (0)
+#define MICROPY_LONGINT_IMPL        (MICROPY_LONGINT_IMPL_LONGLONG)
+#define MICROPY_FLOAT_IMPL          (MICROPY_FLOAT_IMPL_NONE)
+#define MICROPY_ERROR_REPORTING     (MICROPY_ERROR_REPORTING_TERSE)
+
+// type definitions for the specific machine
+
+#define BYTES_PER_WORD (4)
+
+#define MICROPY_MAKE_POINTER_CALLABLE(p) ((void*)((mp_uint_t)(p)))
+
+#define UINT_FMT "%u"
+#define INT_FMT "%d"
+
+typedef int32_t mp_int_t; // must be pointer size
+typedef uint32_t mp_uint_t; // must be pointer size
+typedef void *machine_ptr_t; // must be of pointer size
+typedef const void *machine_const_ptr_t; // must be of pointer size
+typedef long mp_off_t;
+
+// extra built in names to add to the global namespace
+extern const struct _mp_obj_fun_builtin_t mp_builtin_open_obj;
+#define MICROPY_PORT_BUILTINS \
+    { MP_OBJ_NEW_QSTR(MP_QSTR_open), (mp_obj_t)&mp_builtin_open_obj },
+
+// extra built in modules to add to the list of known ones
+extern const struct _mp_obj_module_t pyb_module;
+
+#define MICROPY_PORT_BUILTIN_MODULES \
+    { MP_OBJ_NEW_QSTR(MP_QSTR_pyb), (mp_obj_t)&pyb_module }, \
+
+// We need to provide a declaration/definition of alloca()
+#include <alloca.h>
+
+// board specifics
+
+#define MICROPY_HAL_H "esp_mphal.h"
+#define MICROPY_HW_BOARD_NAME "ESP module"
+#define MICROPY_HW_MCU_NAME "ESP8266"

esp8266/pybstdio.c

@@ -0,0 +1,145 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+#include <errno.h>
+
+#include "mpconfig.h"
+#include "misc.h"
+#include "qstr.h"
+#include "misc.h"
+#include "obj.h"
+#include "stream.h"
+#include "pybstdio.h"
+#include MICROPY_HAL_H
+
+void stdout_tx_str(const char *str) {
+    stdout_tx_strn(str, strlen(str));
+}
+
+void stdout_tx_strn(const char *str, mp_uint_t len) {
+    mp_hal_uart0_write_strn(str, len);
+}
+
+void stdout_tx_strn_cooked(const char *str, mp_uint_t len) {
+    mp_hal_uart0_write_strn_cooked(str, len);
+}
+
+int stdin_rx_chr(void) {
+    for (;;) {
+        int c = mp_hal_uart0_rx_chr();
+        if (c != -1) {
+            return c;
+        }
+        mp_hal_udelay(1);
+        mp_hal_feed_watchdog();
+    }
+}
+
+/******************************************************************************/
+// Micro Python bindings
+
+#define STDIO_FD_IN  (0)
+#define STDIO_FD_OUT (1)
+#define STDIO_FD_ERR (2)
+
+typedef struct _pyb_stdio_obj_t {
+    mp_obj_base_t base;
+    int fd;
+} pyb_stdio_obj_t;
+
+void stdio_obj_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
+    pyb_stdio_obj_t *self = self_in;
+    print(env, "<io.FileIO %d>", self->fd);
+}
+
+STATIC mp_uint_t stdio_read(mp_obj_t self_in, void *buf, mp_uint_t size, int *errcode) {
+    pyb_stdio_obj_t *self = self_in;
+    if (self->fd == STDIO_FD_IN) {
+        for (uint i = 0; i < size; i++) {
+            int c = stdin_rx_chr();
+            if (c == '\r') {
+                c = '\n';
+            }
+            ((byte*)buf)[i] = c;
+        }
+        return size;
+    } else {
+        *errcode = EPERM;
+        return MP_STREAM_ERROR;
+    }
+}
+
+STATIC mp_uint_t stdio_write(mp_obj_t self_in, const void *buf, mp_uint_t size, int *errcode) {
+    pyb_stdio_obj_t *self = self_in;
+    if (self->fd == STDIO_FD_OUT || self->fd == STDIO_FD_ERR) {
+        stdout_tx_strn_cooked(buf, size);
+        return size;
+    } else {
+        *errcode = EPERM;
+        return MP_STREAM_ERROR;
+    }
+}
+
+STATIC mp_obj_t stdio_obj___exit__(mp_uint_t n_args, const mp_obj_t *args) {
+    return mp_const_none;
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(stdio_obj___exit___obj, 4, 4, stdio_obj___exit__);
+
+STATIC const mp_map_elem_t stdio_locals_dict_table[] = {
+    { MP_OBJ_NEW_QSTR(MP_QSTR_read), (mp_obj_t)&mp_stream_read_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_readall), (mp_obj_t)&mp_stream_readall_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_readline), (mp_obj_t)&mp_stream_unbuffered_readline_obj},
+    { MP_OBJ_NEW_QSTR(MP_QSTR_write), (mp_obj_t)&mp_stream_write_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_close), (mp_obj_t)&mp_identity_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR___del__), (mp_obj_t)&mp_identity_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR___enter__), (mp_obj_t)&mp_identity_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR___exit__), (mp_obj_t)&stdio_obj___exit___obj },
+};
+
+STATIC MP_DEFINE_CONST_DICT(stdio_locals_dict, stdio_locals_dict_table);
+
+STATIC const mp_stream_p_t stdio_obj_stream_p = {
+    .read = stdio_read,
+    .write = stdio_write,
+    .is_text = true,
+};
+
+STATIC const mp_obj_type_t stdio_obj_type = {
+    { &mp_type_type },
+    .name = MP_QSTR_FileIO,
+    .print = stdio_obj_print,
+    .getiter = mp_identity,
+    .iternext = mp_stream_unbuffered_iter,
+    .stream_p = &stdio_obj_stream_p,
+    .locals_dict = (mp_obj_t)&stdio_locals_dict,
+};
+
+const pyb_stdio_obj_t mp_sys_stdin_obj = {{&stdio_obj_type}, .fd = STDIO_FD_IN};
+const pyb_stdio_obj_t mp_sys_stdout_obj = {{&stdio_obj_type}, .fd = STDIO_FD_OUT};
+const pyb_stdio_obj_t mp_sys_stderr_obj = {{&stdio_obj_type}, .fd = STDIO_FD_ERR};

esp8266/pybstdio.h

@@ -0,0 +1,30 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+void stdout_tx_str(const char *str);
+void stdout_tx_strn(const char *str, mp_uint_t len);
+void stdout_tx_strn_cooked(const char *str, mp_uint_t len);
+int stdin_rx_chr(void);

esp8266/qstrdefsport.h

@@ -0,0 +1,41 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// qstrs specific to this port
+
+Q(help)
+
+// pyb module
+Q(pyb)
+Q(info)
+Q(freq)
+Q(millis)
+Q(elapsed_millis)
+Q(micros)
+Q(elapsed_micros)
+Q(delay)
+Q(udelay)
+Q(sync)

esp8266/strtoll.c

@@ -0,0 +1,29 @@
+#include <stdlib.h>
+
+// assumes endptr != NULL
+// doesn't check for sign
+// doesn't check for base-prefix
+long long int strtoll(const char *nptr, char **endptr, int base) {
+    long long val = 0;
+
+    for (; *nptr; nptr++) {
+        int v = *nptr;
+        if ('0' <= v && v <= '9') {
+            v -= '0';
+        } else if ('A' <= v && v <= 'Z') {
+            v -= 'A' - 10;
+        } else if ('a' <= v && v <= 'z') {
+            v -= 'a' - 10;
+        } else {
+            break;
+        }
+        if (v >= base) {
+            break;
+        }
+        val = val * base + v;
+    }
+
+    *endptr = (char*)nptr;
+
+    return val;
+}

esp8266/uart.c

@@ -0,0 +1,191 @@
+/******************************************************************************
+ * Copyright 2013-2014 Espressif Systems (Wuxi)
+ *
+ * FileName: uart.c
+ *
+ * Description: Two UART mode configration and interrupt handler.
+ *              Check your hardware connection while use this mode.
+ *
+ * Modification history:
+ *     2014/3/12, v1.0 create this file.
+*******************************************************************************/
+#include "ets_sys.h"
+#include "osapi.h"
+#include "uart.h"
+#include "osapi.h"
+#include "uart_register.h"
+#include "etshal.h"
+#include "c_types.h"
+
+#define RX_BUF_SIZE (256)
+
+// UartDev is defined and initialized in rom code.
+extern UartDevice UartDev;
+
+// circular buffer for RX buffering
+static uint16_t rx_buf_in;
+static uint16_t rx_buf_out;
+static uint8_t rx_buf[RX_BUF_SIZE];
+
+static void uart0_rx_intr_handler(void *para);
+
+/******************************************************************************
+ * FunctionName : uart_config
+ * Description  : Internal used function
+ *                UART0 used for data TX/RX, RX buffer size is 0x100, interrupt enabled
+ *                UART1 just used for debug output
+ * Parameters   : uart_no, use UART0 or UART1 defined ahead
+ * Returns      : NONE
+*******************************************************************************/
+static void ICACHE_FLASH_ATTR uart_config(uint8 uart_no) {
+    if (uart_no == UART1) {
+        PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
+    } else {
+        ETS_UART_INTR_ATTACH(uart0_rx_intr_handler, NULL);
+        PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
+        PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
+        PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, FUNC_U0RTS);
+    }
+
+    uart_div_modify(uart_no, UART_CLK_FREQ / (UartDev.baut_rate));
+
+    WRITE_PERI_REG(UART_CONF0(uart_no), UartDev.exist_parity
+                 | UartDev.parity
+                 | (UartDev.stop_bits << UART_STOP_BIT_NUM_S)
+                 | (UartDev.data_bits << UART_BIT_NUM_S));
+
+    // clear rx and tx fifo,not ready
+    SET_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
+    CLEAR_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
+
+    if (uart_no == UART0) {
+        // set rx fifo trigger
+        WRITE_PERI_REG(UART_CONF1(uart_no),
+                   ((0x10 & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S) |
+                   ((0x10 & UART_RX_FLOW_THRHD) << UART_RX_FLOW_THRHD_S) |
+                   UART_RX_FLOW_EN |
+                   (0x02 & UART_RX_TOUT_THRHD) << UART_RX_TOUT_THRHD_S |
+                   UART_RX_TOUT_EN);
+        SET_PERI_REG_MASK(UART_INT_ENA(uart_no), UART_RXFIFO_TOUT_INT_ENA |
+                      UART_FRM_ERR_INT_ENA);
+    } else {
+        WRITE_PERI_REG(UART_CONF1(uart_no),
+                   ((UartDev.rcv_buff.TrigLvl & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S));
+    }
+
+    // clear all interrupt
+    WRITE_PERI_REG(UART_INT_CLR(uart_no), 0xffff);
+    // enable rx_interrupt
+    SET_PERI_REG_MASK(UART_INT_ENA(uart_no), UART_RXFIFO_FULL_INT_ENA);
+
+    // init RX buffer
+    rx_buf_in = 0;
+    rx_buf_out = 0;
+}
+
+/******************************************************************************
+ * FunctionName : uart1_tx_one_char
+ * Description  : Internal used function
+ *                Use uart1 interface to transfer one char
+ * Parameters   : uint8 TxChar - character to tx
+ * Returns      : OK
+*******************************************************************************/
+void uart_tx_one_char(uint8 uart, uint8 TxChar) {
+    while (true) {
+        uint32 fifo_cnt = READ_PERI_REG(UART_STATUS(uart)) & (UART_TXFIFO_CNT<<UART_TXFIFO_CNT_S);
+        if ((fifo_cnt >> UART_TXFIFO_CNT_S & UART_TXFIFO_CNT) < 126) {
+            break;
+        }
+    }
+    WRITE_PERI_REG(UART_FIFO(uart), TxChar);
+}
+
+/******************************************************************************
+ * FunctionName : uart1_write_char
+ * Description  : Internal used function
+ *                Do some special deal while tx char is '\r' or '\n'
+ * Parameters   : char c - character to tx
+ * Returns      : NONE
+*******************************************************************************/
+static void ICACHE_FLASH_ATTR
+uart1_write_char(char c) {
+    if (c == '\n') {
+        uart_tx_one_char(UART1, '\r');
+        uart_tx_one_char(UART1, '\n');
+    } else if (c == '\r') {
+    } else {
+        uart_tx_one_char(UART1, c);
+    }
+}
+
+/******************************************************************************
+ * FunctionName : uart0_rx_intr_handler
+ * Description  : Internal used function
+ *                UART0 interrupt handler, add self handle code inside
+ * Parameters   : void *para - point to ETS_UART_INTR_ATTACH's arg
+ * Returns      : NONE
+*******************************************************************************/
+
+static void uart0_rx_intr_handler(void *para) {
+  /* uart0 and uart1 intr combine togther, when interrupt occur, see reg 0x3ff20020, bit2, bit0 represents
+    * uart1 and uart0 respectively
+    */
+
+    uint8 RcvChar;
+    uint8 uart_no = UART0;
+
+    if (UART_FRM_ERR_INT_ST == (READ_PERI_REG(UART_INT_ST(uart_no)) & UART_FRM_ERR_INT_ST)) {
+        // frame error
+        WRITE_PERI_REG(UART_INT_CLR(uart_no), UART_FRM_ERR_INT_CLR);
+    }
+
+    if (UART_RXFIFO_FULL_INT_ST == (READ_PERI_REG(UART_INT_ST(uart_no)) & UART_RXFIFO_FULL_INT_ST)) {
+        // fifo full
+        WRITE_PERI_REG(UART_INT_CLR(uart_no), UART_RXFIFO_FULL_INT_CLR);
+        goto read_chars;
+    } else if (UART_RXFIFO_TOUT_INT_ST == (READ_PERI_REG(UART_INT_ST(uart_no)) & UART_RXFIFO_TOUT_INT_ST)) {
+        WRITE_PERI_REG(UART_INT_CLR(uart_no), UART_RXFIFO_TOUT_INT_CLR);
+        read_chars:
+        while (READ_PERI_REG(UART_STATUS(uart_no)) & (UART_RXFIFO_CNT << UART_RXFIFO_CNT_S)) {
+            RcvChar = READ_PERI_REG(UART_FIFO(uart_no)) & 0xff;
+            uint16_t rx_buf_in_next = (rx_buf_in + 1) % RX_BUF_SIZE;
+            if (rx_buf_in_next != rx_buf_out) {
+                rx_buf[rx_buf_in] = RcvChar;
+                rx_buf_in = rx_buf_in_next;
+            }
+        }
+    }
+}
+
+int uart0_rx(void) {
+  if (rx_buf_out != rx_buf_in) {
+      int chr = rx_buf[rx_buf_out];
+      rx_buf_out = (rx_buf_out + 1) % RX_BUF_SIZE;
+      return chr;
+  } else {
+      return -1;
+  }
+}
+
+/******************************************************************************
+ * FunctionName : uart_init
+ * Description  : user interface for init uart
+ * Parameters   : UartBautRate uart0_br - uart0 bautrate
+ *                UartBautRate uart1_br - uart1 bautrate
+ * Returns      : NONE
+*******************************************************************************/
+void ICACHE_FLASH_ATTR uart_init(UartBautRate uart0_br, UartBautRate uart1_br) {
+    // rom use 74880 baut_rate, here reinitialize
+    UartDev.baut_rate = uart0_br;
+    uart_config(UART0);
+    UartDev.baut_rate = uart1_br;
+    uart_config(UART1);
+    ETS_UART_INTR_ENABLE();
+
+    // install uart1 putc callback
+    os_install_putc1((void *)uart1_write_char);
+}
+
+void ICACHE_FLASH_ATTR uart_reattach() {
+    uart_init(UART_BIT_RATE_74880, UART_BIT_RATE_74880);
+}

esp8266/uart.h

@@ -0,0 +1,96 @@
+#ifndef _INCLUDED_UART_H_
+#define _INCLUDED_UART_H_
+
+#define UART0 (0)
+#define UART1 (1)
+
+typedef enum {
+    UART_FIVE_BITS = 0x0,
+    UART_SIX_BITS = 0x1,
+    UART_SEVEN_BITS = 0x2,
+    UART_EIGHT_BITS = 0x3
+} UartBitsNum4Char;
+
+typedef enum {
+    UART_ONE_STOP_BIT             = 0,
+    UART_ONE_HALF_STOP_BIT        = BIT2,
+    UART_TWO_STOP_BIT             = BIT2
+} UartStopBitsNum;
+
+typedef enum {
+    UART_NONE_BITS = 0,
+    UART_ODD_BITS   = 0,
+    UART_EVEN_BITS = BIT4
+} UartParityMode;
+
+typedef enum {
+    UART_STICK_PARITY_DIS   = 0,
+    UART_STICK_PARITY_EN    = BIT3 | BIT5
+} UartExistParity;
+
+typedef enum {
+    UART_BIT_RATE_9600     = 9600,
+    UART_BIT_RATE_19200   = 19200,
+    UART_BIT_RATE_38400   = 38400,
+    UART_BIT_RATE_57600   = 57600,
+    UART_BIT_RATE_74880   = 74880,
+    UART_BIT_RATE_115200 = 115200,
+    UART_BIT_RATE_230400 = 230400,
+    UART_BIT_RATE_256000 = 256000,
+    UART_BIT_RATE_460800 = 460800,
+    UART_BIT_RATE_921600 = 921600
+} UartBautRate;
+
+typedef enum {
+    UART_NONE_CTRL,
+    UART_HARDWARE_CTRL,
+    UART_XON_XOFF_CTRL
+} UartFlowCtrl;
+
+typedef enum {
+    UART_EMPTY,
+    UART_UNDER_WRITE,
+    UART_WRITE_OVER
+} RcvMsgBuffState;
+
+typedef struct {
+    uint32     RcvBuffSize;
+    uint8     *pRcvMsgBuff;
+    uint8     *pWritePos;
+    uint8     *pReadPos;
+    uint8      TrigLvl; //JLU: may need to pad
+    RcvMsgBuffState  BuffState;
+} RcvMsgBuff;
+
+typedef struct {
+    uint32   TrxBuffSize;
+    uint8   *pTrxBuff;
+} TrxMsgBuff;
+
+typedef enum {
+    UART_BAUD_RATE_DET,
+    UART_WAIT_SYNC_FRM,
+    UART_SRCH_MSG_HEAD,
+    UART_RCV_MSG_BODY,
+    UART_RCV_ESC_CHAR,
+} RcvMsgState;
+
+typedef struct {
+    UartBautRate      baut_rate;
+    UartBitsNum4Char  data_bits;
+    UartExistParity   exist_parity;
+    UartParityMode    parity;    // chip size in byte
+    UartStopBitsNum   stop_bits;
+    UartFlowCtrl      flow_ctrl;
+    RcvMsgBuff        rcv_buff;
+    TrxMsgBuff        trx_buff;
+    RcvMsgState       rcv_state;
+    int               received;
+    int               buff_uart_no;  //indicate which uart use tx/rx buffer
+} UartDevice;
+
+void uart_init(UartBautRate uart0_br, UartBautRate uart1_br);
+int uart0_rx(void);
+void uart_tx_one_char(uint8 uart, uint8 TxChar);
+
+#endif // _INCLUDED_UART_H_

esp8266/uart_register.h

@@ -0,0 +1,128 @@
+//Generated at 2012-07-03 18:44:06
+/*
+ *  Copyright (c) 2010 - 2011 Espressif System
+ *
+ */
+
+#ifndef UART_REGISTER_H_INCLUDED
+#define UART_REGISTER_H_INCLUDED
+#define REG_UART_BASE( i )  (0x60000000+(i)*0xf00)
+//version value:32'h062000
+
+#define UART_FIFO( i )                          (REG_UART_BASE( i ) + 0x0)
+#define UART_RXFIFO_RD_BYTE 0x000000FF
+#define UART_RXFIFO_RD_BYTE_S 0
+
+#define UART_INT_RAW( i )                       (REG_UART_BASE( i ) + 0x4)
+#define UART_RXFIFO_TOUT_INT_RAW (BIT(8))
+#define UART_BRK_DET_INT_RAW (BIT(7))
+#define UART_CTS_CHG_INT_RAW (BIT(6))
+#define UART_DSR_CHG_INT_RAW (BIT(5))
+#define UART_RXFIFO_OVF_INT_RAW (BIT(4))
+#define UART_FRM_ERR_INT_RAW (BIT(3))
+#define UART_PARITY_ERR_INT_RAW (BIT(2))
+#define UART_TXFIFO_EMPTY_INT_RAW (BIT(1))
+#define UART_RXFIFO_FULL_INT_RAW (BIT(0))
+
+#define UART_INT_ST( i )                        (REG_UART_BASE( i ) + 0x8)
+#define UART_RXFIFO_TOUT_INT_ST (BIT(8))
+#define UART_BRK_DET_INT_ST (BIT(7))
+#define UART_CTS_CHG_INT_ST (BIT(6))
+#define UART_DSR_CHG_INT_ST (BIT(5))
+#define UART_RXFIFO_OVF_INT_ST (BIT(4))
+#define UART_FRM_ERR_INT_ST (BIT(3))
+#define UART_PARITY_ERR_INT_ST (BIT(2))
+#define UART_TXFIFO_EMPTY_INT_ST (BIT(1))
+#define UART_RXFIFO_FULL_INT_ST (BIT(0))
+
+#define UART_INT_ENA( i )                       (REG_UART_BASE( i ) + 0xC)
+#define UART_RXFIFO_TOUT_INT_ENA (BIT(8))
+#define UART_BRK_DET_INT_ENA (BIT(7))
+#define UART_CTS_CHG_INT_ENA (BIT(6))
+#define UART_DSR_CHG_INT_ENA (BIT(5))
+#define UART_RXFIFO_OVF_INT_ENA (BIT(4))
+#define UART_FRM_ERR_INT_ENA (BIT(3))
+#define UART_PARITY_ERR_INT_ENA (BIT(2))
+#define UART_TXFIFO_EMPTY_INT_ENA (BIT(1))
+#define UART_RXFIFO_FULL_INT_ENA (BIT(0))
+
+#define UART_INT_CLR( i )                       (REG_UART_BASE( i ) + 0x10)
+#define UART_RXFIFO_TOUT_INT_CLR (BIT(8))
+#define UART_BRK_DET_INT_CLR (BIT(7))
+#define UART_CTS_CHG_INT_CLR (BIT(6))
+#define UART_DSR_CHG_INT_CLR (BIT(5))
+#define UART_RXFIFO_OVF_INT_CLR (BIT(4))
+#define UART_FRM_ERR_INT_CLR (BIT(3))
+#define UART_PARITY_ERR_INT_CLR (BIT(2))
+#define UART_TXFIFO_EMPTY_INT_CLR (BIT(1))
+#define UART_RXFIFO_FULL_INT_CLR (BIT(0))
+
+#define UART_CLKDIV( i )                        (REG_UART_BASE( i ) + 0x14)
+#define UART_CLKDIV_CNT 0x000FFFFF
+#define UART_CLKDIV_S 0
+
+#define UART_AUTOBAUD( i )                      (REG_UART_BASE( i ) + 0x18)
+#define UART_GLITCH_FILT 0x000000FF
+#define UART_GLITCH_FILT_S 8
+#define UART_AUTOBAUD_EN (BIT(0))
+
+#define UART_STATUS( i )                        (REG_UART_BASE( i ) + 0x1C)
+#define UART_TXD (BIT(31))
+#define UART_RTSN (BIT(30))
+#define UART_DTRN (BIT(29))
+#define UART_TXFIFO_CNT 0x000000FF
+#define UART_TXFIFO_CNT_S 16
+#define UART_RXD (BIT(15))
+#define UART_CTSN (BIT(14))
+#define UART_DSRN (BIT(13))
+#define UART_RXFIFO_CNT 0x000000FF
+#define UART_RXFIFO_CNT_S 0
+
+#define UART_CONF0( i )                         (REG_UART_BASE( i ) + 0x20)
+#define UART_TXFIFO_RST (BIT(18))
+#define UART_RXFIFO_RST (BIT(17))
+#define UART_IRDA_EN (BIT(16))
+#define UART_TX_FLOW_EN (BIT(15))
+#define UART_LOOPBACK (BIT(14))
+#define UART_IRDA_RX_INV (BIT(13))
+#define UART_IRDA_TX_INV (BIT(12))
+#define UART_IRDA_WCTL (BIT(11))
+#define UART_IRDA_TX_EN (BIT(10))
+#define UART_IRDA_DPLX (BIT(9))
+#define UART_TXD_BRK (BIT(8))
+#define UART_SW_DTR (BIT(7))
+#define UART_SW_RTS (BIT(6))
+#define UART_STOP_BIT_NUM 0x00000003
+#define UART_STOP_BIT_NUM_S 4
+#define UART_BIT_NUM 0x00000003
+#define UART_BIT_NUM_S 2
+#define UART_PARITY_EN (BIT(1))
+#define UART_PARITY (BIT(0))
+
+#define UART_CONF1( i )                         (REG_UART_BASE( i ) + 0x24)
+#define UART_RX_TOUT_EN (BIT(31))
+#define UART_RX_TOUT_THRHD 0x0000007F
+#define UART_RX_TOUT_THRHD_S 24
+#define UART_RX_FLOW_EN (BIT(23))
+#define UART_RX_FLOW_THRHD 0x0000007F
+#define UART_RX_FLOW_THRHD_S 16
+#define UART_TXFIFO_EMPTY_THRHD 0x0000007F
+#define UART_TXFIFO_EMPTY_THRHD_S 8
+#define UART_RXFIFO_FULL_THRHD 0x0000007F
+#define UART_RXFIFO_FULL_THRHD_S 0
+
+#define UART_LOWPULSE( i )                      (REG_UART_BASE( i ) + 0x28)
+#define UART_LOWPULSE_MIN_CNT         0x000FFFFF
+#define UART_LOWPULSE_MIN_CNT_S     0
+
+#define UART_HIGHPULSE( i )                     (REG_UART_BASE( i ) + 0x2C)
+#define UART_HIGHPULSE_MIN_CNT         0x000FFFFF
+#define UART_HIGHPULSE_MIN_CNT_S     0
+
+#define UART_PULSE_NUM( i )                     (REG_UART_BASE( i ) + 0x30)
+#define UART_PULSE_NUM_CNT                  0x0003FF
+#define UART_PULSE_NUM_CNT_S               0
+
+#define UART_DATE( i )                          (REG_UART_BASE( i ) + 0x78)
+#define UART_ID( i )                            (REG_UART_BASE( i ) + 0x7C)
+#endif // UART_REGISTER_H_INCLUDED

esp8266/user_config.h

@@ -0,0 +1 @@
+// empty

examples/SDdatalogger/datalogger.py

@@ -19,7 +19,7 @@ while True:
     if switch():
         pyb.delay(200)                      # delay avoids detection of multiple presses
         blue.on()                           # blue LED indicates file open
-        log = open('1:/log.csv', 'w')       # open file on SD (SD: '1:/', flash: '0/)
+        log = open('/sd/log.csv', 'w')       # open file on SD (SD: '/sd/', flash: '/flash/)
 
         # until switch is pressed again
         while not switch():

extmod/crypto-algorithms/sha256.c

@@ -0,0 +1,158 @@
+/*********************************************************************
+* Filename:   sha256.c
+* Author:     Brad Conte (brad AT bradconte.com)
+* Copyright:
+* Disclaimer: This code is presented "as is" without any guarantees.
+* Details:    Implementation of the SHA-256 hashing algorithm.
+              SHA-256 is one of the three algorithms in the SHA2
+              specification. The others, SHA-384 and SHA-512, are not
+              offered in this implementation.
+              Algorithm specification can be found here:
+               * http://csrc.nist.gov/publications/fips/fips180-2/fips180-2withchangenotice.pdf
+              This implementation uses little endian byte order.
+*********************************************************************/
+
+/*************************** HEADER FILES ***************************/
+#include <stdlib.h>
+#include <memory.h>
+#include "sha256.h"
+
+/****************************** MACROS ******************************/
+#define ROTLEFT(a,b) (((a) << (b)) | ((a) >> (32-(b))))
+#define ROTRIGHT(a,b) (((a) >> (b)) | ((a) << (32-(b))))
+
+#define CH(x,y,z) (((x) & (y)) ^ (~(x) & (z)))
+#define MAJ(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
+#define EP0(x) (ROTRIGHT(x,2) ^ ROTRIGHT(x,13) ^ ROTRIGHT(x,22))
+#define EP1(x) (ROTRIGHT(x,6) ^ ROTRIGHT(x,11) ^ ROTRIGHT(x,25))
+#define SIG0(x) (ROTRIGHT(x,7) ^ ROTRIGHT(x,18) ^ ((x) >> 3))
+#define SIG1(x) (ROTRIGHT(x,17) ^ ROTRIGHT(x,19) ^ ((x) >> 10))
+
+/**************************** VARIABLES *****************************/
+static const WORD k[64] = {
+	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5,0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5,
+	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3,0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174,
+	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc,0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da,
+	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7,0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967,
+	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13,0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85,
+	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3,0xd192e819,0xd6990624,0xf40e3585,0x106aa070,
+	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5,0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3,
+	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208,0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
+};
+
+/*********************** FUNCTION DEFINITIONS ***********************/
+void sha256_transform(SHA256_CTX *ctx, const BYTE data[])
+{
+	WORD a, b, c, d, e, f, g, h, i, j, t1, t2, m[64];
+
+	for (i = 0, j = 0; i < 16; ++i, j += 4)
+		m[i] = (data[j] << 24) | (data[j + 1] << 16) | (data[j + 2] << 8) | (data[j + 3]);
+	for ( ; i < 64; ++i)
+		m[i] = SIG1(m[i - 2]) + m[i - 7] + SIG0(m[i - 15]) + m[i - 16];
+
+	a = ctx->state[0];
+	b = ctx->state[1];
+	c = ctx->state[2];
+	d = ctx->state[3];
+	e = ctx->state[4];
+	f = ctx->state[5];
+	g = ctx->state[6];
+	h = ctx->state[7];
+
+	for (i = 0; i < 64; ++i) {
+		t1 = h + EP1(e) + CH(e,f,g) + k[i] + m[i];
+		t2 = EP0(a) + MAJ(a,b,c);
+		h = g;
+		g = f;
+		f = e;
+		e = d + t1;
+		d = c;
+		c = b;
+		b = a;
+		a = t1 + t2;
+	}
+
+	ctx->state[0] += a;
+	ctx->state[1] += b;
+	ctx->state[2] += c;
+	ctx->state[3] += d;
+	ctx->state[4] += e;
+	ctx->state[5] += f;
+	ctx->state[6] += g;
+	ctx->state[7] += h;
+}
+
+void sha256_init(SHA256_CTX *ctx)
+{
+	ctx->datalen = 0;
+	ctx->bitlen = 0;
+	ctx->state[0] = 0x6a09e667;
+	ctx->state[1] = 0xbb67ae85;
+	ctx->state[2] = 0x3c6ef372;
+	ctx->state[3] = 0xa54ff53a;
+	ctx->state[4] = 0x510e527f;
+	ctx->state[5] = 0x9b05688c;
+	ctx->state[6] = 0x1f83d9ab;
+	ctx->state[7] = 0x5be0cd19;
+}
+
+void sha256_update(SHA256_CTX *ctx, const BYTE data[], size_t len)
+{
+	WORD i;
+
+	for (i = 0; i < len; ++i) {
+		ctx->data[ctx->datalen] = data[i];
+		ctx->datalen++;
+		if (ctx->datalen == 64) {
+			sha256_transform(ctx, ctx->data);
+			ctx->bitlen += 512;
+			ctx->datalen = 0;
+		}
+	}
+}
+
+void sha256_final(SHA256_CTX *ctx, BYTE hash[])
+{
+	WORD i;
+
+	i = ctx->datalen;
+
+	// Pad whatever data is left in the buffer.
+	if (ctx->datalen < 56) {
+		ctx->data[i++] = 0x80;
+		while (i < 56)
+			ctx->data[i++] = 0x00;
+	}
+	else {
+		ctx->data[i++] = 0x80;
+		while (i < 64)
+			ctx->data[i++] = 0x00;
+		sha256_transform(ctx, ctx->data);
+		memset(ctx->data, 0, 56);
+	}
+
+	// Append to the padding the total message's length in bits and transform.
+	ctx->bitlen += ctx->datalen * 8;
+	ctx->data[63] = ctx->bitlen;
+	ctx->data[62] = ctx->bitlen >> 8;
+	ctx->data[61] = ctx->bitlen >> 16;
+	ctx->data[60] = ctx->bitlen >> 24;
+	ctx->data[59] = ctx->bitlen >> 32;
+	ctx->data[58] = ctx->bitlen >> 40;
+	ctx->data[57] = ctx->bitlen >> 48;
+	ctx->data[56] = ctx->bitlen >> 56;
+	sha256_transform(ctx, ctx->data);
+
+	// Since this implementation uses little endian byte ordering and SHA uses big endian,
+	// reverse all the bytes when copying the final state to the output hash.
+	for (i = 0; i < 4; ++i) {
+		hash[i]      = (ctx->state[0] >> (24 - i * 8)) & 0x000000ff;
+		hash[i + 4]  = (ctx->state[1] >> (24 - i * 8)) & 0x000000ff;
+		hash[i + 8]  = (ctx->state[2] >> (24 - i * 8)) & 0x000000ff;
+		hash[i + 12] = (ctx->state[3] >> (24 - i * 8)) & 0x000000ff;
+		hash[i + 16] = (ctx->state[4] >> (24 - i * 8)) & 0x000000ff;
+		hash[i + 20] = (ctx->state[5] >> (24 - i * 8)) & 0x000000ff;
+		hash[i + 24] = (ctx->state[6] >> (24 - i * 8)) & 0x000000ff;
+		hash[i + 28] = (ctx->state[7] >> (24 - i * 8)) & 0x000000ff;
+	}
+}

extmod/crypto-algorithms/sha256.h

@@ -0,0 +1,34 @@
+/*********************************************************************
+* Filename:   sha256.h
+* Author:     Brad Conte (brad AT bradconte.com)
+* Copyright:
+* Disclaimer: This code is presented "as is" without any guarantees.
+* Details:    Defines the API for the corresponding SHA1 implementation.
+*********************************************************************/
+
+#ifndef SHA256_H
+#define SHA256_H
+
+/*************************** HEADER FILES ***************************/
+#include <stddef.h>
+
+/****************************** MACROS ******************************/
+#define SHA256_BLOCK_SIZE 32            // SHA256 outputs a 32 byte digest
+
+/**************************** DATA TYPES ****************************/
+typedef unsigned char BYTE;             // 8-bit byte
+typedef unsigned int  WORD;             // 32-bit word, change to "long" for 16-bit machines
+
+typedef struct {
+	BYTE data[64];
+	WORD datalen;
+	unsigned long long bitlen;
+	WORD state[8];
+} SHA256_CTX;
+
+/*********************** FUNCTION DECLARATIONS **********************/
+void sha256_init(SHA256_CTX *ctx);
+void sha256_update(SHA256_CTX *ctx, const BYTE data[], size_t len);
+void sha256_final(SHA256_CTX *ctx, BYTE hash[]);
+
+#endif   // SHA256_H

extmod/moductypes.c

@@ -101,11 +101,16 @@ enum {
 
 // Here we need to set sign bit right
 #define TYPE2SMALLINT(x, nbits) ((((int)x) << (32 - nbits)) >> 1)
-#define GET_TYPE(x, nbits) (((x) >> (31 - nbits)) & ((1 << nbits) - 1));
+#define GET_TYPE(x, nbits) (((x) >> (31 - nbits)) & ((1 << nbits) - 1))
 // Bit 0 is "is_signed"
 #define GET_SCALAR_SIZE(val_type) (1 << ((val_type) >> 1))
 #define VALUE_MASK(type_nbits) ~((int)0x80000000 >> type_nbits)
 
+#define IS_SCALAR_ARRAY(tuple_desc) ((tuple_desc)->len == 2)
+// We cannot apply the below to INT8, as their range [-128, 127]
+#define IS_SCALAR_ARRAY_OF_BYTES(tuple_desc) (GET_TYPE(MP_OBJ_SMALL_INT_VALUE((tuple_desc)->items[1]), VAL_TYPE_BITS) == UINT8)
+
+// "struct" in uctypes context means "structural", i.e. aggregate, type.
 STATIC const mp_obj_type_t uctypes_struct_type;
 
 typedef struct _mp_obj_uctypes_struct_t {
@@ -153,6 +158,10 @@ STATIC void uctypes_struct_print(void (*print)(void *env, const char *fmt, ...),
     print(env, "<struct %s %p>", typen, self->addr);
 }
 
+// Get size of any type descriptor
+STATIC mp_uint_t uctypes_struct_size(mp_obj_t desc_in, mp_uint_t *max_field_size);
+
+// Get size of scalar type descriptor
 static inline mp_uint_t uctypes_struct_scalar_size(int val_type) {
     if (val_type == FLOAT32) {
         return 4;
@@ -161,11 +170,60 @@ static inline mp_uint_t uctypes_struct_scalar_size(int val_type) {
     }
 }
 
+// Get size of aggregate type descriptor
+STATIC mp_uint_t uctypes_struct_agg_size(mp_obj_tuple_t *t, mp_uint_t *max_field_size) {
+    mp_uint_t total_size = 0;
+
+    mp_int_t offset_ = MP_OBJ_SMALL_INT_VALUE(t->items[0]);
+    mp_uint_t agg_type = GET_TYPE(offset_, AGG_TYPE_BITS);
+
+    switch (agg_type) {
+        case STRUCT:
+            return uctypes_struct_size(t->items[1], max_field_size);
+        case PTR:
+            if (sizeof(void*) > *max_field_size) {
+                *max_field_size = sizeof(void*);
+            }
+            return sizeof(void*);
+        case ARRAY: {
+            mp_int_t arr_sz = MP_OBJ_SMALL_INT_VALUE(t->items[1]);
+            uint val_type = GET_TYPE(arr_sz, VAL_TYPE_BITS);
+            arr_sz &= VALUE_MASK(VAL_TYPE_BITS);
+            mp_uint_t item_s;
+            if (t->len == 2) {
+                // Elements of array are scalar
+                item_s = GET_SCALAR_SIZE(val_type);
+                if (item_s > *max_field_size) {
+                    *max_field_size = item_s;
+                }
+            } else {
+                // Elements of array are aggregates
+                item_s = uctypes_struct_size(t->items[2], max_field_size);
+            }
+
+            return item_s * arr_sz;
+        }
+        default:
+            assert(0);
+    }
+
+    return total_size;
+}
+
 STATIC mp_uint_t uctypes_struct_size(mp_obj_t desc_in, mp_uint_t *max_field_size) {
     mp_obj_dict_t *d = desc_in;
     mp_uint_t total_size = 0;
 
     if (!MP_OBJ_IS_TYPE(desc_in, &mp_type_dict)) {
+        if (MP_OBJ_IS_TYPE(desc_in, &mp_type_tuple)) {
+            return uctypes_struct_agg_size((mp_obj_tuple_t*)desc_in, max_field_size);
+        } else if (MP_OBJ_IS_SMALL_INT(desc_in)) {
+            // We allow sizeof on both type definitions and structures/structure fields,
+            // but scalar structure field is lowered into native Python int, so all
+            // type info is lost. So, we cannot say if it's scalar type description,
+            // or such lowered scalar.
+            nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError, "Cannot unambiguously get sizeof scalar"));
+        }
         syntax_error();
     }
 
@@ -189,48 +247,10 @@ STATIC mp_uint_t uctypes_struct_size(mp_obj_t desc_in, mp_uint_t *max_field_size
                 }
                 mp_obj_tuple_t *t = (mp_obj_tuple_t*)v;
                 mp_int_t offset = MP_OBJ_SMALL_INT_VALUE(t->items[0]);
-                mp_uint_t agg_type = GET_TYPE(offset, AGG_TYPE_BITS);
                 offset &= VALUE_MASK(AGG_TYPE_BITS);
-
-                switch (agg_type) {
-                    case STRUCT: {
-                        mp_uint_t s = uctypes_struct_size(t->items[1], max_field_size);
-                        if (offset + s > total_size) {
-                            total_size = offset + s;
-                        }
-                        break;
-                    }
-                    case PTR: {
-                        if (offset + sizeof(void*) > total_size) {
-                            total_size = offset + sizeof(void*);
-                        }
-                        if (sizeof(void*) > *max_field_size) {
-                            *max_field_size = sizeof(void*);
-                        }
-                        break;
-                    }
-                    case ARRAY: {
-                        mp_int_t arr_sz = MP_OBJ_SMALL_INT_VALUE(t->items[1]);
-                        uint val_type = GET_TYPE(arr_sz, VAL_TYPE_BITS);
-                        arr_sz &= VALUE_MASK(VAL_TYPE_BITS);
-                        mp_uint_t item_s;
-                        if (t->len == 2) {
-                            item_s = GET_SCALAR_SIZE(val_type);
-                            if (item_s > *max_field_size) {
-                                *max_field_size = item_s;
-                            }
-                        } else {
-                            item_s = uctypes_struct_size(t->items[2], max_field_size);
-                        }
-
-                        mp_uint_t byte_sz = item_s * arr_sz;
-                        if (offset + byte_sz > total_size) {
-                            total_size = offset + byte_sz;
-                        }
-                        break;
-                    }
-                    default:
-                        assert(0);
+                mp_uint_t s = uctypes_struct_agg_size(t, max_field_size);
+                if (offset + s > total_size) {
+                    total_size = offset + s;
                 }
             }
         }
@@ -243,7 +263,13 @@ STATIC mp_uint_t uctypes_struct_size(mp_obj_t desc_in, mp_uint_t *max_field_size
 
 STATIC mp_obj_t uctypes_struct_sizeof(mp_obj_t obj_in) {
     mp_uint_t max_field_size = 0;
+    if (MP_OBJ_IS_TYPE(obj_in, &mp_type_bytearray)) {
+        return mp_obj_len(obj_in);
+    }
+    // We can apply sizeof either to structure definition (a dict)
+    // or to instantiated structure
     if (MP_OBJ_IS_TYPE(obj_in, &uctypes_struct_type)) {
+        // Extract structure definition
         mp_obj_uctypes_struct_t *obj = obj_in;
         obj_in = obj->desc;
     }
@@ -435,7 +461,14 @@ STATIC mp_obj_t uctypes_struct_attr_op(mp_obj_t self_in, qstr attr, mp_obj_t set
             o->flags = self->flags;
             return o;
         }
-        case PTR: case ARRAY: {
+        case ARRAY: {
+            mp_uint_t dummy;
+            if (IS_SCALAR_ARRAY(sub) && IS_SCALAR_ARRAY_OF_BYTES(sub)) {
+                return mp_obj_new_bytearray_by_ref(uctypes_struct_agg_size(sub, &dummy), self->addr + offset);
+            }
+            // Fall thru to return uctypes struct object
+        }
+        case PTR: {
             mp_obj_uctypes_struct_t *o = m_new_obj(mp_obj_uctypes_struct_t);
             o->base.type = &uctypes_struct_type;
             o->desc = sub;

extmod/moduhashlib.c

@@ -0,0 +1,127 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Paul Sokolovsky
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include "mpconfig.h"
+#include "nlr.h"
+#include "misc.h"
+#include "qstr.h"
+#include "obj.h"
+#include "runtime.h"
+
+#if MICROPY_PY_UHASHLIB
+
+#include "crypto-algorithms/sha256.h"
+
+typedef struct _mp_obj_hash_t {
+    mp_obj_base_t base;
+    char state[0];
+} mp_obj_hash_t;
+
+STATIC mp_obj_t hash_update(mp_obj_t self_in, mp_obj_t arg);
+
+STATIC mp_obj_t hash_make_new(mp_obj_t type_in, mp_uint_t n_args, mp_uint_t n_kw, const mp_obj_t *args) {
+    mp_arg_check_num(n_args, n_kw, 0, 1, false);
+    mp_obj_hash_t *o = m_new_obj_var(mp_obj_hash_t, char, sizeof(SHA256_CTX));
+    o->base.type = type_in;
+    sha256_init((SHA256_CTX*)o->state);
+    if (n_args == 1) {
+        hash_update(o, args[0]);
+    }
+    return o;
+}
+
+STATIC mp_obj_t hash_update(mp_obj_t self_in, mp_obj_t arg) {
+    mp_obj_hash_t *self = self_in;
+    mp_buffer_info_t bufinfo;
+    mp_get_buffer_raise(arg, &bufinfo, MP_BUFFER_READ);
+    sha256_update((SHA256_CTX*)self->state, bufinfo.buf, bufinfo.len);
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_2(hash_update_obj, hash_update);
+
+STATIC mp_obj_t hash_digest(mp_obj_t self_in) {
+    mp_obj_hash_t *self = self_in;
+    byte *hash;
+    mp_obj_t o = mp_obj_str_builder_start(&mp_type_bytes, SHA256_BLOCK_SIZE, &hash);
+    sha256_final((SHA256_CTX*)self->state, hash);
+    return mp_obj_str_builder_end(o);
+}
+MP_DEFINE_CONST_FUN_OBJ_1(hash_digest_obj, hash_digest);
+
+STATIC mp_obj_t hash_hexdigest(mp_obj_t self_in) {
+    mp_not_implemented("");
+#if 0
+    mp_obj_hash_t *self = self_in;
+    byte hash[SHA256_BLOCK_SIZE];
+    sha256_final((SHA256_CTX*)self->state, hash);
+    return mp_obj_new_str((char*)hash, SHA256_BLOCK_SIZE, false);
+#endif
+}
+MP_DEFINE_CONST_FUN_OBJ_1(hash_hexdigest_obj, hash_hexdigest);
+
+STATIC const mp_map_elem_t hash_locals_dict_table[] = {
+    { MP_OBJ_NEW_QSTR(MP_QSTR_update), (mp_obj_t) &hash_update_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_digest), (mp_obj_t) &hash_digest_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_hexdigest), (mp_obj_t) &hash_hexdigest_obj },
+};
+
+STATIC MP_DEFINE_CONST_DICT(hash_locals_dict, hash_locals_dict_table);
+
+STATIC const mp_obj_type_t sha256_type = {
+    { &mp_type_type },
+    .name = MP_QSTR_sha256,
+    .make_new = hash_make_new,
+    .locals_dict = (mp_obj_t)&hash_locals_dict,
+};
+
+STATIC const mp_map_elem_t mp_module_hashlib_globals_table[] = {
+    { MP_OBJ_NEW_QSTR(MP_QSTR___name__), MP_OBJ_NEW_QSTR(MP_QSTR_uhashlib) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_sha256), (mp_obj_t)&sha256_type },
+};
+
+STATIC const mp_obj_dict_t mp_module_hashlib_globals = {
+    .base = {&mp_type_dict},
+    .map = {
+        .all_keys_are_qstrs = 1,
+        .table_is_fixed_array = 1,
+        .used = MP_ARRAY_SIZE(mp_module_hashlib_globals_table),
+        .alloc = MP_ARRAY_SIZE(mp_module_hashlib_globals_table),
+        .table = (mp_map_elem_t*)mp_module_hashlib_globals_table,
+    },
+};
+
+const mp_obj_module_t mp_module_uhashlib = {
+    .base = { &mp_type_module },
+    .name = MP_QSTR_uhashlib,
+    .globals = (mp_obj_dict_t*)&mp_module_hashlib_globals,
+};
+
+#include "crypto-algorithms/sha256.c"
+
+#endif //MICROPY_PY_UHASHLIB

extmod/moduheapq.c

@@ -0,0 +1,138 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2014 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <unistd.h>
+
+#include "mpconfig.h"
+#include "misc.h"
+#include "nlr.h"
+#include "qstr.h"
+#include "obj.h"
+#include "objlist.h"
+#include "runtime0.h"
+#include "runtime.h"
+
+#if MICROPY_PY_UHEAPQ
+
+// the algorithm here is modelled on CPython's heapq.py
+
+STATIC mp_obj_list_t *get_heap(mp_obj_t heap_in) {
+    if (!MP_OBJ_IS_TYPE(heap_in, &mp_type_list)) {
+        nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError, "heap must be a list"));
+    }
+    return heap_in;
+}
+
+STATIC void heap_siftdown(mp_obj_list_t *heap, mp_uint_t start_pos, mp_uint_t pos) {
+    mp_obj_t item = heap->items[pos];
+    while (pos > start_pos) {
+        mp_uint_t parent_pos = (pos - 1) >> 1;
+        mp_obj_t parent = heap->items[parent_pos];
+        if (mp_binary_op(MP_BINARY_OP_LESS, item, parent) == mp_const_true) {
+            heap->items[pos] = parent;
+            pos = parent_pos;
+        } else {
+            break;
+        }
+    }
+    heap->items[pos] = item;
+}
+
+STATIC void heap_siftup(mp_obj_list_t *heap, mp_uint_t pos) {
+    mp_uint_t start_pos = pos;
+    mp_uint_t end_pos = heap->len;
+    mp_obj_t item = heap->items[pos];
+    for (mp_uint_t child_pos = 2 * pos + 1; child_pos < end_pos; child_pos = 2 * pos + 1) {
+        // choose right child if it's <= left child
+        if (child_pos + 1 < end_pos && mp_binary_op(MP_BINARY_OP_LESS, heap->items[child_pos], heap->items[child_pos + 1]) == mp_const_false) {
+            child_pos += 1;
+        }
+        // bubble up the smaller child
+        heap->items[pos] = heap->items[child_pos];
+        pos = child_pos;
+    }
+    heap->items[pos] = item;
+    heap_siftdown(heap, start_pos, pos);
+}
+
+STATIC mp_obj_t mod_uheapq_heappush(mp_obj_t heap_in, mp_obj_t item) {
+    mp_obj_list_t *heap = get_heap(heap_in);
+    mp_obj_list_append(heap, item);
+    heap_siftdown(heap, 0, heap->len - 1);
+    return mp_const_none;
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_2(mod_uheapq_heappush_obj, mod_uheapq_heappush);
+
+STATIC mp_obj_t mod_uheapq_heappop(mp_obj_t heap_in) {
+    mp_obj_list_t *heap = get_heap(heap_in);
+    if (heap->len == 0) {
+        nlr_raise(mp_obj_new_exception_msg(&mp_type_IndexError, "empty heap"));
+    }
+    mp_obj_t item = heap->items[0];
+    heap->len -= 1;
+    heap->items[0] = heap->items[heap->len];
+    heap->items[heap->len] = MP_OBJ_NULL; // so we don't retain a pointer
+    if (heap->len) {
+        heap_siftup(heap, 0);
+    }
+    return item;
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_1(mod_uheapq_heappop_obj, mod_uheapq_heappop);
+
+STATIC mp_obj_t mod_uheapq_heapify(mp_obj_t heap_in) {
+    mp_obj_list_t *heap = get_heap(heap_in);
+    for (mp_uint_t i = heap->len / 2; i > 0;) {
+        heap_siftup(heap, --i);
+    }
+    return mp_const_none;
+}
+STATIC MP_DEFINE_CONST_FUN_OBJ_1(mod_uheapq_heapify_obj, mod_uheapq_heapify);
+
+STATIC const mp_map_elem_t mp_module_uheapq_globals_table[] = {
+    { MP_OBJ_NEW_QSTR(MP_QSTR___name__), MP_OBJ_NEW_QSTR(MP_QSTR_uheapq) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_heappush), (mp_obj_t)&mod_uheapq_heappush_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_heappop), (mp_obj_t)&mod_uheapq_heappop_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_heapify), (mp_obj_t)&mod_uheapq_heapify_obj },
+};
+
+STATIC const mp_obj_dict_t mp_module_uheapq_globals = {
+    .base = {&mp_type_dict},
+    .map = {
+        .all_keys_are_qstrs = 1,
+        .table_is_fixed_array = 1,
+        .used = MP_ARRAY_SIZE(mp_module_uheapq_globals_table),
+        .alloc = MP_ARRAY_SIZE(mp_module_uheapq_globals_table),
+        .table = (mp_map_elem_t*)mp_module_uheapq_globals_table,
+    },
+};
+
+const mp_obj_module_t mp_module_uheapq = {
+    .base = { &mp_type_module },
+    .name = MP_QSTR_uheapq,
+    .globals = (mp_obj_dict_t*)&mp_module_uheapq_globals,
+};
+
+#endif //MICROPY_PY_UHEAPQ

extmod/modure.c

@@ -134,7 +134,7 @@ STATIC mp_obj_t re_split(uint n_args, const mp_obj_t *args) {
     }
 
     mp_obj_t retval = mp_obj_new_list(0, NULL);
-    const char *caps[caps_num];
+    const char **caps = alloca(caps_num * sizeof(char*));
     while (true) {
         int res = re1_5_recursiveloopprog(&self->re, &subj, caps, caps_num, false);
 

lib/libm/roundf.c

@@ -0,0 +1,33 @@
+/*****************************************************************************/
+/*****************************************************************************/
+// roundf from musl-0.9.15
+/*****************************************************************************/
+/*****************************************************************************/
+
+#include "libm.h"
+
+float roundf(float x)
+{
+	union {float f; uint32_t i;} u = {x};
+	int e = u.i >> 23 & 0xff;
+	float_t y;
+
+	if (e >= 0x7f+23)
+		return x;
+	if (u.i >> 31)
+		x = -x;
+	if (e < 0x7f-1) {
+		FORCE_EVAL(x + 0x1p23f);
+		return 0*u.f;
+	}
+	y = (float)(x + 0x1p23f) - 0x1p23f - x;
+	if (y > 0.5f)
+		y = y + x - 1;
+	else if (y <= -0.5f)
+		y = y + x + 1;
+	else
+		y = y + x;
+	if (u.i >> 31)
+		y = -y;
+	return y;
+}

py/argcheck.c

@@ -34,28 +34,49 @@
 #include "obj.h"
 #include "runtime.h"
 
+STATIC NORETURN void terse_arg_mismatch(void) {
+    nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError, "argument num/types mismatch"));
+}
+
 void mp_arg_check_num(mp_uint_t n_args, mp_uint_t n_kw, mp_uint_t n_args_min, mp_uint_t n_args_max, bool takes_kw) {
     // TODO maybe take the function name as an argument so we can print nicer error messages
 
     if (n_kw && !takes_kw) {
-        nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError, "function does not take keyword arguments"));
+        if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+            terse_arg_mismatch();
+        } else {
+            nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError,
+                "function does not take keyword arguments"));
+        }
     }
 
     if (n_args_min == n_args_max) {
         if (n_args != n_args_min) {
-            nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
-                                                    "function takes %d positional arguments but %d were given",
-                                                    n_args_min, n_args));
+            if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+                terse_arg_mismatch();
+            } else {
+                nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
+                    "function takes %d positional arguments but %d were given",
+                    n_args_min, n_args));
+            }
         }
     } else {
         if (n_args < n_args_min) {
-            nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
-                                                    "function missing %d required positional arguments",
-                                                    n_args_min - n_args));
+            if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+                terse_arg_mismatch();
+            } else {
+                nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
+                    "function missing %d required positional arguments",
+                    n_args_min - n_args));
+            }
         } else if (n_args > n_args_max) {
-            nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
-                                                    "function expected at most %d arguments, got %d",
-                                                    n_args_max, n_args));
+            if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+                terse_arg_mismatch();
+            } else {
+                nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
+                    "function expected at most %d arguments, got %d",
+                    n_args_max, n_args));
+            }
         }
     }
 }
@@ -74,7 +95,13 @@ void mp_arg_parse_all(mp_uint_t n_pos, const mp_obj_t *pos, mp_map_t *kws, mp_ui
             mp_map_elem_t *kw = mp_map_lookup(kws, MP_OBJ_NEW_QSTR(allowed[i].qstr), MP_MAP_LOOKUP);
             if (kw == NULL) {
                 if (allowed[i].flags & MP_ARG_REQUIRED) {
-                    nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError, "'%s' argument required", qstr_str(allowed[i].qstr)));
+                    if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+                        terse_arg_mismatch();
+                    } else {
+                        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
+                            "'%s' argument required",
+                            qstr_str(allowed[i].qstr)));
+                    }
                 }
                 out_vals[i] = allowed[i].defval;
                 continue;
@@ -94,13 +121,23 @@ void mp_arg_parse_all(mp_uint_t n_pos, const mp_obj_t *pos, mp_map_t *kws, mp_ui
         }
     }
     if (pos_found < n_pos) {
-        // TODO better error message
         extra_positional:
-        nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError, "extra positional arguments given"));
+        if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+            terse_arg_mismatch();
+        } else {
+            // TODO better error message
+            nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError,
+                "extra positional arguments given"));
+        }
     }
     if (kws_found < kws->used) {
-        // TODO better error message
-        nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError, "extra keyword arguments given"));
+        if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+            terse_arg_mismatch();
+        } else {
+            // TODO better error message
+            nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError,
+                "extra keyword arguments given"));
+        }
     }
 }
 

py/bc.c

@@ -44,6 +44,7 @@
 #if 0 // print debugging info
 #define DEBUG_PRINT (1)
 #else // don't print debugging info
+#define DEBUG_PRINT (0)
 #define DEBUG_printf(...) (void)0
 #endif
 
@@ -93,7 +94,6 @@ void mp_setup_code_state(mp_code_state *code_state, mp_obj_t self_in, mp_uint_t
     // usage for the common case of positional only args.
     mp_obj_fun_bc_t *self = self_in;
     mp_uint_t n_state = code_state->n_state;
-    const byte *ip = code_state->ip;
 
     code_state->code_info = self->bytecode;
     code_state->sp = &code_state->state[0] - 1;
@@ -153,13 +153,21 @@ void mp_setup_code_state(mp_code_state *code_state, mp_obj_t self_in, mp_uint_t
             *var_pos_kw_args = dict;
         }
 
+        // get pointer to arg_names array at start of bytecode prelude
+        const mp_obj_t *arg_names;
+        {
+            const byte *code_info = code_state->code_info;
+            mp_uint_t code_info_size = mp_decode_uint(&code_info);
+            arg_names = (const mp_obj_t*)(code_state->code_info + code_info_size);
+        }
+
         for (mp_uint_t i = 0; i < n_kw; i++) {
-            qstr arg_name = MP_OBJ_QSTR_VALUE(kwargs[2 * i]);
+            mp_obj_t wanted_arg_name = kwargs[2 * i];
             for (mp_uint_t j = 0; j < self->n_pos_args + self->n_kwonly_args; j++) {
-                if (arg_name == self->args[j]) {
+                if (wanted_arg_name == arg_names[j]) {
                     if (code_state->state[n_state - 1 - j] != MP_OBJ_NULL) {
                         nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
-                            "function got multiple values for argument '%s'", qstr_str(arg_name)));
+                            "function got multiple values for argument '%s'", qstr_str(MP_OBJ_QSTR_VALUE(wanted_arg_name))));
                     }
                     code_state->state[n_state - 1 - j] = kwargs[2 * i + 1];
                     goto continue2;
@@ -202,13 +210,13 @@ continue2:;
             if (code_state->state[n_state - 1 - self->n_pos_args - i] == MP_OBJ_NULL) {
                 mp_map_elem_t *elem = NULL;
                 if (self->has_def_kw_args) {
-                    elem = mp_map_lookup(&((mp_obj_dict_t*)self->extra_args[self->n_def_args])->map, MP_OBJ_NEW_QSTR(self->args[self->n_pos_args + i]), MP_MAP_LOOKUP);
+                    elem = mp_map_lookup(&((mp_obj_dict_t*)self->extra_args[self->n_def_args])->map, arg_names[self->n_pos_args + i], MP_MAP_LOOKUP);
                 }
                 if (elem != NULL) {
                     code_state->state[n_state - 1 - self->n_pos_args - i] = elem->value;
                 } else {
                     nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
-                        "function missing required keyword argument '%s'", qstr_str(self->args[self->n_pos_args + i])));
+                        "function missing required keyword argument '%s'", qstr_str(MP_OBJ_QSTR_VALUE(arg_names[self->n_pos_args + i]))));
                 }
             }
         }
@@ -225,6 +233,7 @@ continue2:;
     }
 
     // bytecode prelude: initialise closed over variables
+    const byte *ip = code_state->ip;
     for (mp_uint_t n_local = *ip++; n_local > 0; n_local--) {
         mp_uint_t local_num = *ip++;
         code_state->state[n_state - 1 - local_num] = mp_obj_new_cell(code_state->state[n_state - 1 - local_num]);

py/bc.h

@@ -53,7 +53,7 @@ mp_uint_t mp_decode_uint(const byte **ptr);
 
 mp_vm_return_kind_t mp_execute_bytecode(mp_code_state *code_state, volatile mp_obj_t inject_exc);
 void mp_setup_code_state(mp_code_state *code_state, mp_obj_t self_in, mp_uint_t n_args, mp_uint_t n_kw, const mp_obj_t *args);
-void mp_bytecode_print(const void *descr, const byte *code, mp_uint_t len);
+void mp_bytecode_print(const void *descr, mp_uint_t n_total_args, const byte *code, mp_uint_t len);
 void mp_bytecode_print2(const byte *code, mp_uint_t len);
 
 // Helper macros to access pointer with least significant bit holding a flag

py/bc0.h

@@ -31,92 +31,90 @@
 #define MP_BC_LOAD_CONST_NONE    (0x11)
 #define MP_BC_LOAD_CONST_TRUE    (0x12)
 #define MP_BC_LOAD_CONST_ELLIPSIS    (0x13)
-#define MP_BC_LOAD_CONST_SMALL_INT   (0x14) // 24-bit, in excess
+#define MP_BC_LOAD_CONST_SMALL_INT   (0x14) // signed var-int
 #define MP_BC_LOAD_CONST_INT     (0x15) // qstr
 #define MP_BC_LOAD_CONST_DEC     (0x16) // qstr
-#define MP_BC_LOAD_CONST_BYTES   (0x18) // qstr
-#define MP_BC_LOAD_CONST_STRING  (0x19) // qstr
-#define MP_BC_LOAD_NULL          (0x1a)
+#define MP_BC_LOAD_CONST_BYTES   (0x17) // qstr
+#define MP_BC_LOAD_CONST_STRING  (0x18) // qstr
+#define MP_BC_LOAD_NULL          (0x19)
 
-#define MP_BC_LOAD_FAST_0        (0x20)
-#define MP_BC_LOAD_FAST_1        (0x21)
-#define MP_BC_LOAD_FAST_2        (0x22)
-#define MP_BC_LOAD_FAST_N        (0x23) // uint
-#define MP_BC_LOAD_DEREF         (0x25) // uint
-#define MP_BC_LOAD_NAME          (0x26) // qstr
-#define MP_BC_LOAD_GLOBAL        (0x27) // qstr
-#define MP_BC_LOAD_ATTR          (0x28) // qstr
-#define MP_BC_LOAD_METHOD        (0x29) // qstr
-#define MP_BC_LOAD_BUILD_CLASS   (0x2a)
-#define MP_BC_LOAD_SUBSCR        (0x2b)
+#define MP_BC_LOAD_FAST_N        (0x1a) // uint
+#define MP_BC_LOAD_DEREF         (0x1b) // uint
+#define MP_BC_LOAD_NAME          (0x1c) // qstr
+#define MP_BC_LOAD_GLOBAL        (0x1d) // qstr
+#define MP_BC_LOAD_ATTR          (0x1e) // qstr
+#define MP_BC_LOAD_METHOD        (0x1f) // qstr
+#define MP_BC_LOAD_BUILD_CLASS   (0x20)
+#define MP_BC_LOAD_SUBSCR        (0x21)
 
-#define MP_BC_STORE_FAST_0       (0x30)
-#define MP_BC_STORE_FAST_1       (0x31)
-#define MP_BC_STORE_FAST_2       (0x32)
-#define MP_BC_STORE_FAST_N       (0x33) // uint
-#define MP_BC_STORE_DEREF        (0x34) // uint
-#define MP_BC_STORE_NAME         (0x35) // qstr
-#define MP_BC_STORE_GLOBAL       (0x36) // qstr
-#define MP_BC_STORE_ATTR         (0x37) // qstr
-#define MP_BC_STORE_SUBSCR       (0x38)
+#define MP_BC_STORE_FAST_N       (0x22) // uint
+#define MP_BC_STORE_DEREF        (0x23) // uint
+#define MP_BC_STORE_NAME         (0x24) // qstr
+#define MP_BC_STORE_GLOBAL       (0x25) // qstr
+#define MP_BC_STORE_ATTR         (0x26) // qstr
+#define MP_BC_STORE_SUBSCR       (0x27)
 
-#define MP_BC_DELETE_FAST        (0x39) // uint
-#define MP_BC_DELETE_DEREF       (0x3a) // uint
-#define MP_BC_DELETE_NAME        (0x3b) // qstr
-#define MP_BC_DELETE_GLOBAL      (0x3c) // qstr
+#define MP_BC_DELETE_FAST        (0x28) // uint
+#define MP_BC_DELETE_DEREF       (0x29) // uint
+#define MP_BC_DELETE_NAME        (0x2a) // qstr
+#define MP_BC_DELETE_GLOBAL      (0x2b) // qstr
 
-#define MP_BC_DUP_TOP            (0x40)
-#define MP_BC_DUP_TOP_TWO        (0x41)
-#define MP_BC_POP_TOP            (0x42)
-#define MP_BC_ROT_TWO            (0x43)
-#define MP_BC_ROT_THREE          (0x44)
+#define MP_BC_DUP_TOP            (0x30)
+#define MP_BC_DUP_TOP_TWO        (0x31)
+#define MP_BC_POP_TOP            (0x32)
+#define MP_BC_ROT_TWO            (0x33)
+#define MP_BC_ROT_THREE          (0x34)
 
-#define MP_BC_JUMP               (0x45) // rel byte code offset, 16-bit signed, in excess
-#define MP_BC_POP_JUMP_IF_TRUE   (0x46) // rel byte code offset, 16-bit signed, in excess
-#define MP_BC_POP_JUMP_IF_FALSE  (0x47) // rel byte code offset, 16-bit signed, in excess
-#define MP_BC_JUMP_IF_TRUE_OR_POP    (0x48) // rel byte code offset, 16-bit signed, in excess
-#define MP_BC_JUMP_IF_FALSE_OR_POP   (0x49) // rel byte code offset, 16-bit signed, in excess
-#define MP_BC_SETUP_WITH         (0x4d) // rel byte code offset, 16-bit unsigned
-#define MP_BC_WITH_CLEANUP       (0x4e)
-#define MP_BC_SETUP_EXCEPT       (0x4f) // rel byte code offset, 16-bit unsigned
-#define MP_BC_SETUP_FINALLY      (0x50) // rel byte code offset, 16-bit unsigned
-#define MP_BC_END_FINALLY        (0x51)
-#define MP_BC_GET_ITER           (0x52)
-#define MP_BC_FOR_ITER           (0x53) // rel byte code offset, 16-bit unsigned
-#define MP_BC_POP_BLOCK          (0x54)
-#define MP_BC_POP_EXCEPT         (0x55)
-#define MP_BC_UNWIND_JUMP        (0x56) // rel byte code offset, 16-bit signed, in excess; then a byte
+#define MP_BC_JUMP               (0x35) // rel byte code offset, 16-bit signed, in excess
+#define MP_BC_POP_JUMP_IF_TRUE   (0x36) // rel byte code offset, 16-bit signed, in excess
+#define MP_BC_POP_JUMP_IF_FALSE  (0x37) // rel byte code offset, 16-bit signed, in excess
+#define MP_BC_JUMP_IF_TRUE_OR_POP    (0x38) // rel byte code offset, 16-bit signed, in excess
+#define MP_BC_JUMP_IF_FALSE_OR_POP   (0x39) // rel byte code offset, 16-bit signed, in excess
+#define MP_BC_SETUP_WITH         (0x3d) // rel byte code offset, 16-bit unsigned
+#define MP_BC_WITH_CLEANUP       (0x3e)
+#define MP_BC_SETUP_EXCEPT       (0x3f) // rel byte code offset, 16-bit unsigned
+#define MP_BC_SETUP_FINALLY      (0x40) // rel byte code offset, 16-bit unsigned
+#define MP_BC_END_FINALLY        (0x41)
+#define MP_BC_GET_ITER           (0x42)
+#define MP_BC_FOR_ITER           (0x43) // rel byte code offset, 16-bit unsigned
+#define MP_BC_POP_BLOCK          (0x44)
+#define MP_BC_POP_EXCEPT         (0x45)
+#define MP_BC_UNWIND_JUMP        (0x46) // rel byte code offset, 16-bit signed, in excess; then a byte
 
-#define MP_BC_NOT                (0x60)
-#define MP_BC_UNARY_OP           (0x61) // byte
-#define MP_BC_BINARY_OP          (0x62) // byte
+#define MP_BC_NOT                (0x47)
 
-#define MP_BC_BUILD_TUPLE        (0x70) // uint
-#define MP_BC_BUILD_LIST         (0x71) // uint
-#define MP_BC_LIST_APPEND        (0x72) // uint
-#define MP_BC_BUILD_MAP          (0x73) // uint
-#define MP_BC_STORE_MAP          (0x74)
-#define MP_BC_MAP_ADD            (0x75) // uint
-#define MP_BC_BUILD_SET          (0x76) // uint
-#define MP_BC_SET_ADD            (0x77) // uint
-#define MP_BC_BUILD_SLICE        (0x78) // uint
-#define MP_BC_UNPACK_SEQUENCE    (0x79) // uint
-#define MP_BC_UNPACK_EX          (0x7a) // uint
+#define MP_BC_BUILD_TUPLE        (0x50) // uint
+#define MP_BC_BUILD_LIST         (0x51) // uint
+#define MP_BC_LIST_APPEND        (0x52) // uint
+#define MP_BC_BUILD_MAP          (0x53) // uint
+#define MP_BC_STORE_MAP          (0x54)
+#define MP_BC_MAP_ADD            (0x55) // uint
+#define MP_BC_BUILD_SET          (0x56) // uint
+#define MP_BC_SET_ADD            (0x57) // uint
+#define MP_BC_BUILD_SLICE        (0x58) // uint
+#define MP_BC_UNPACK_SEQUENCE    (0x59) // uint
+#define MP_BC_UNPACK_EX          (0x5a) // uint
 
-#define MP_BC_RETURN_VALUE       (0x80)
-#define MP_BC_RAISE_VARARGS      (0x81) // byte
-#define MP_BC_YIELD_VALUE        (0x82)
-#define MP_BC_YIELD_FROM         (0x83)
+#define MP_BC_RETURN_VALUE       (0x5b)
+#define MP_BC_RAISE_VARARGS      (0x5c) // byte
+#define MP_BC_YIELD_VALUE        (0x5d)
+#define MP_BC_YIELD_FROM         (0x5e)
 
-#define MP_BC_MAKE_FUNCTION         (0x90) // uint
-#define MP_BC_MAKE_FUNCTION_DEFARGS (0x91) // uint
-#define MP_BC_MAKE_CLOSURE          (0x92) // uint
-#define MP_BC_MAKE_CLOSURE_DEFARGS  (0x93) // uint
-#define MP_BC_CALL_FUNCTION         (0x94) // uint
-#define MP_BC_CALL_FUNCTION_VAR_KW  (0x95) // uint
-#define MP_BC_CALL_METHOD           (0x96) // uint
-#define MP_BC_CALL_METHOD_VAR_KW    (0x97) // uint
+#define MP_BC_MAKE_FUNCTION         (0x60) // uint
+#define MP_BC_MAKE_FUNCTION_DEFARGS (0x61) // uint
+#define MP_BC_MAKE_CLOSURE          (0x62) // uint
+#define MP_BC_MAKE_CLOSURE_DEFARGS  (0x63) // uint
+#define MP_BC_CALL_FUNCTION         (0x64) // uint
+#define MP_BC_CALL_FUNCTION_VAR_KW  (0x65) // uint
+#define MP_BC_CALL_METHOD           (0x66) // uint
+#define MP_BC_CALL_METHOD_VAR_KW    (0x67) // uint
 
-#define MP_BC_IMPORT_NAME        (0xe0) // qstr
-#define MP_BC_IMPORT_FROM        (0xe1) // qstr
-#define MP_BC_IMPORT_STAR        (0xe2)
+#define MP_BC_IMPORT_NAME        (0x68) // qstr
+#define MP_BC_IMPORT_FROM        (0x69) // qstr
+#define MP_BC_IMPORT_STAR        (0x6a)
+
+#define MP_BC_LOAD_CONST_SMALL_INT_MULTI (0x70) // + N(64)
+#define MP_BC_LOAD_FAST_MULTI            (0xb0) // + N(16)
+#define MP_BC_STORE_FAST_MULTI           (0xc0) // + N(16)
+#define MP_BC_UNARY_OP_MULTI             (0xd0) // + op(5)
+#define MP_BC_BINARY_OP_MULTI            (0xd5) // + op(35)

py/binary.c

@@ -61,6 +61,10 @@ int mp_binary_get_size(char struct_type, char val_type, mp_uint_t *palign) {
                     size = 8; break;
                 case 'P': case 'O': case 'S':
                     size = sizeof(void*); break;
+                case 'f':
+                    size = sizeof(float); break;
+                case 'd':
+                    size = sizeof(double); break;
             }
             break;
         case '@': {
@@ -90,6 +94,12 @@ int mp_binary_get_size(char struct_type, char val_type, mp_uint_t *palign) {
                 case 'P': case 'O': case 'S':
                     align = alignof(void*);
                     size = sizeof(void*); break;
+                case 'f':
+                    align = alignof(float);
+                    size = sizeof(float); break;
+                case 'd':
+                    align = alignof(double);
+                    size = sizeof(double); break;
             }
         }
     }
@@ -252,10 +262,10 @@ void mp_binary_set_val_array(char typecode, void *p, mp_uint_t index, mp_obj_t v
     switch (typecode) {
 #if MICROPY_PY_BUILTINS_FLOAT
         case 'f':
-            ((float*)p)[index] = mp_obj_float_get(val_in);
+            ((float*)p)[index] = mp_obj_get_float(val_in);
             break;
         case 'd':
-            ((double*)p)[index] = mp_obj_float_get(val_in);
+            ((double*)p)[index] = mp_obj_get_float(val_in);
             break;
 #endif
         default:

py/builtin.c

@@ -33,6 +33,7 @@
 #include "qstr.h"
 #include "obj.h"
 #include "objstr.h"
+#include "smallint.h"
 #include "runtime0.h"
 #include "runtime.h"
 #include "builtin.h"
@@ -88,15 +89,6 @@ STATIC mp_obj_t mp_builtin___build_class__(mp_uint_t n_args, const mp_obj_t *arg
 }
 MP_DEFINE_CONST_FUN_OBJ_VAR(mp_builtin___build_class___obj, 2, mp_builtin___build_class__);
 
-STATIC mp_obj_t mp_builtin___repl_print__(mp_obj_t o) {
-    if (o != mp_const_none) {
-        mp_obj_print(o, PRINT_REPR);
-        printf("\n");
-    }
-    return mp_const_none;
-}
-MP_DEFINE_CONST_FUN_OBJ_1(mp_builtin___repl_print___obj, mp_builtin___repl_print__);
-
 STATIC mp_obj_t mp_builtin_abs(mp_obj_t o_in) {
     if (MP_OBJ_IS_SMALL_INT(o_in)) {
         mp_int_t val = MP_OBJ_SMALL_INT_VALUE(o_in);
@@ -253,8 +245,8 @@ STATIC mp_obj_t mp_builtin_divmod(mp_obj_t o1_in, mp_obj_t o2_in) {
             nlr_raise(mp_obj_new_exception_msg(&mp_type_ZeroDivisionError, "division by zero"));
         }
         mp_obj_t args[2];
-        args[0] = MP_OBJ_NEW_SMALL_INT(i1 / i2);
-        args[1] = MP_OBJ_NEW_SMALL_INT(i1 % i2);
+        args[0] = MP_OBJ_NEW_SMALL_INT(mp_small_int_floor_divide(i1, i2));
+        args[1] = MP_OBJ_NEW_SMALL_INT(mp_small_int_modulo(i1, i2));
         return mp_obj_new_tuple(2, args);
     #if MICROPY_PY_BUILTINS_FLOAT
     } else if (MP_OBJ_IS_TYPE(o1_in, &mp_type_float) || MP_OBJ_IS_TYPE(o2_in, &mp_type_float)) {
@@ -271,7 +263,14 @@ STATIC mp_obj_t mp_builtin_divmod(mp_obj_t o1_in, mp_obj_t o2_in) {
         return mp_obj_new_tuple(2, tuple);
     #endif
     } else {
-        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError, "unsupported operand type(s) for divmod(): '%s' and '%s'", mp_obj_get_type_str(o1_in), mp_obj_get_type_str(o2_in)));
+        if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+            nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError,
+                "unsupported operand type(s) for divmod()"));
+        } else {
+            nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
+                "unsupported operand type(s) for divmod(): '%s' and '%s'",
+                mp_obj_get_type_str(o1_in), mp_obj_get_type_str(o2_in)));
+        }
     }
 }
 MP_DEFINE_CONST_FUN_OBJ_2(mp_builtin_divmod_obj, mp_builtin_divmod);
@@ -356,8 +355,8 @@ STATIC mp_obj_t mp_builtin_ord(mp_obj_t o_in) {
     mp_uint_t len;
     const char *str = mp_obj_str_get_data(o_in, &len);
     #if MICROPY_PY_BUILTINS_STR_UNICODE
-    mp_uint_t charlen = unichar_charlen(str, len);
-    if (charlen == 1) {
+    len = unichar_charlen(str, len);
+    if (len == 1) {
         if (MP_OBJ_IS_STR(o_in) && UTF8_IS_NONASCII(*str)) {
             mp_int_t ord = *str++ & 0x7F;
             for (mp_int_t mask = 0x40; ord & mask; mask >>= 1) {
@@ -370,17 +369,21 @@ STATIC mp_obj_t mp_builtin_ord(mp_obj_t o_in) {
         } else {
             return mp_obj_new_int(((const byte*)str)[0]);
         }
-    } else {
-        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError, "ord() expected a character, but string of length %d found", charlen));
     }
     #else
     if (len == 1) {
         // don't sign extend when converting to ord
         return mp_obj_new_int(((const byte*)str)[0]);
-    } else {
-        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError, "ord() expected a character, but string of length %d found", len));
     }
     #endif
+
+    if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
+            "ord expects a character"));
+    } else {
+        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError,
+            "ord() expected a character, but string of length %d found", len));
+    }
 }
 MP_DEFINE_CONST_FUN_OBJ_1(mp_builtin_ord_obj, mp_builtin_ord);
 
@@ -440,6 +443,14 @@ STATIC mp_obj_t mp_builtin_print(mp_uint_t n_args, const mp_obj_t *args, mp_map_
 }
 MP_DEFINE_CONST_FUN_OBJ_KW(mp_builtin_print_obj, 0, mp_builtin_print);
 
+STATIC mp_obj_t mp_builtin___repl_print__(mp_obj_t o) {
+    if (o != mp_const_none) {
+        mp_builtin_print(1, &o, (mp_map_t*)&mp_const_empty_map);
+    }
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_1(mp_builtin___repl_print___obj, mp_builtin___repl_print__);
+
 STATIC mp_obj_t mp_builtin_repr(mp_obj_t o_in) {
     vstr_t *vstr = vstr_new();
     mp_obj_print_helper((void (*)(void *env, const char *fmt, ...))vstr_printf, vstr, o_in, PRINT_REPR);
@@ -447,9 +458,30 @@ STATIC mp_obj_t mp_builtin_repr(mp_obj_t o_in) {
     vstr_free(vstr);
     return s;
 }
-
 MP_DEFINE_CONST_FUN_OBJ_1(mp_builtin_repr_obj, mp_builtin_repr);
 
+STATIC mp_obj_t mp_builtin_round(mp_obj_t o_in) {
+    // TODO support second arg
+    if (MP_OBJ_IS_INT(o_in)) {
+        return o_in;
+    }
+#if MICROPY_PY_BUILTINS_FLOAT
+    mp_float_t val = mp_obj_get_float(o_in);
+    mp_float_t rounded = MICROPY_FLOAT_C_FUN(round)(val);
+    mp_int_t r = rounded;
+    // make rounded value even if it was halfway between ints
+    if (val - rounded == 0.5) {
+        r = (r + 1) & (~1);
+    } else if (val - rounded == -0.5) {
+        r &= ~1;
+    }
+#else
+    mp_int_t r = mp_obj_get_int(o_in);
+#endif
+    return mp_obj_new_int(r);
+}
+MP_DEFINE_CONST_FUN_OBJ_1(mp_builtin_round_obj, mp_builtin_round);
+
 STATIC mp_obj_t mp_builtin_sum(mp_uint_t n_args, const mp_obj_t *args) {
     assert(1 <= n_args && n_args <= 2);
     mp_obj_t value;

py/builtin.h

@@ -24,7 +24,7 @@
  * THE SOFTWARE.
  */
 
-mp_obj_t mp_builtin___import__(mp_uint_t n_args, mp_obj_t *args);
+mp_obj_t mp_builtin___import__(mp_uint_t n_args, const mp_obj_t *args);
 mp_obj_t mp_builtin_open(mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kwargs);
 
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin___build_class___obj);
@@ -35,6 +35,7 @@ MP_DECLARE_CONST_FUN_OBJ(mp_builtin_all_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_any_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_bin_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_callable_obj);
+MP_DECLARE_CONST_FUN_OBJ(mp_builtin_compile_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_chr_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_dir_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_divmod_obj);
@@ -60,6 +61,7 @@ MP_DECLARE_CONST_FUN_OBJ(mp_builtin_ord_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_pow_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_print_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_repr_obj);
+MP_DECLARE_CONST_FUN_OBJ(mp_builtin_round_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_sorted_obj);
 MP_DECLARE_CONST_FUN_OBJ(mp_builtin_sum_obj);
 
@@ -91,3 +93,5 @@ extern const mp_obj_module_t mp_module_uctypes;
 extern const mp_obj_module_t mp_module_uzlib;
 extern const mp_obj_module_t mp_module_ujson;
 extern const mp_obj_module_t mp_module_ure;
+extern const mp_obj_module_t mp_module_uheapq;
+extern const mp_obj_module_t mp_module_uhashlib;

py/builtinevex.c

@@ -34,19 +34,87 @@
 #include "lexerunix.h"
 #include "parse.h"
 #include "obj.h"
+#include "objfun.h"
 #include "parsehelper.h"
 #include "compile.h"
 #include "runtime0.h"
 #include "runtime.h"
 #include "builtin.h"
 
-STATIC mp_obj_t eval_exec_helper(mp_uint_t n_args, const mp_obj_t *args, mp_parse_input_kind_t parse_input_kind) {
+#if MICROPY_PY_BUILTINS_COMPILE
+
+typedef struct _mp_obj_code_t {
+    mp_obj_base_t base;
+    mp_obj_t module_fun;
+} mp_obj_code_t;
+
+STATIC const mp_obj_type_t mp_type_code = {
+    { &mp_type_type },
+    .name = MP_QSTR_code,
+};
+
+STATIC mp_obj_t code_execute(mp_obj_code_t *self, mp_obj_t globals, mp_obj_t locals) {
+    // save context and set new context
+    mp_obj_dict_t *old_globals = mp_globals_get();
+    mp_obj_dict_t *old_locals = mp_locals_get();
+    mp_globals_set(globals);
+    mp_locals_set(locals);
+
+    // a bit of a hack: fun_bc will re-set globals, so need to make sure it's
+    // the correct one
+    if (MP_OBJ_IS_TYPE(self->module_fun, &mp_type_fun_bc)) {
+        mp_obj_fun_bc_t *fun_bc = self->module_fun;
+        fun_bc->globals = globals;
+    }
+
+    // execute code
+    nlr_buf_t nlr;
+    if (nlr_push(&nlr) == 0) {
+        mp_obj_t ret = mp_call_function_0(self->module_fun);
+        nlr_pop();
+        mp_globals_set(old_globals);
+        mp_locals_set(old_locals);
+        return ret;
+    } else {
+        // exception; restore context and re-raise same exception
+        mp_globals_set(old_globals);
+        mp_locals_set(old_locals);
+        nlr_raise(nlr.ret_val);
+    }
+}
+
+STATIC mp_obj_t mp_builtin_compile(mp_uint_t n_args, const mp_obj_t *args) {
+    // get the source
     mp_uint_t str_len;
     const char *str = mp_obj_str_get_data(args[0], &str_len);
 
-    // create the lexer
-    mp_lexer_t *lex = mp_lexer_new_from_str_len(MP_QSTR__lt_string_gt_, str, str_len, 0);
+    // get the filename
+    qstr filename = mp_obj_str_get_qstr(args[1]);
 
+    // create the lexer
+    mp_lexer_t *lex = mp_lexer_new_from_str_len(filename, str, str_len, 0);
+
+    // get the compile mode
+    qstr mode = mp_obj_str_get_qstr(args[2]);
+    mp_parse_input_kind_t parse_input_kind;
+    switch (mode) {
+        case MP_QSTR_single: parse_input_kind = MP_PARSE_SINGLE_INPUT; break;
+        case MP_QSTR_exec: parse_input_kind = MP_PARSE_FILE_INPUT; break;
+        case MP_QSTR_eval: parse_input_kind = MP_PARSE_EVAL_INPUT; break;
+        default:
+            nlr_raise(mp_obj_new_exception_msg(&mp_type_ValueError, "bad compile mode"));
+    }
+
+    mp_obj_code_t *code = m_new_obj(mp_obj_code_t);
+    code->base.type = &mp_type_code;
+    code->module_fun = mp_parse_compile_execute(lex, parse_input_kind, NULL, NULL);
+    return code;
+}
+MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(mp_builtin_compile_obj, 3, 6, mp_builtin_compile);
+
+#endif // MICROPY_PY_BUILTINS_COMPILE
+
+STATIC mp_obj_t eval_exec_helper(mp_uint_t n_args, const mp_obj_t *args, mp_parse_input_kind_t parse_input_kind) {
     // work out the context
     mp_obj_dict_t *globals = mp_globals_get();
     mp_obj_dict_t *locals = mp_locals_get();
@@ -59,6 +127,18 @@ STATIC mp_obj_t eval_exec_helper(mp_uint_t n_args, const mp_obj_t *args, mp_pars
         }
     }
 
+    #if MICROPY_PY_BUILTINS_COMPILE
+    if (MP_OBJ_IS_TYPE(args[0], &mp_type_code)) {
+        return code_execute(args[0], globals, locals);
+    }
+    #endif
+
+    mp_uint_t str_len;
+    const char *str = mp_obj_str_get_data(args[0], &str_len);
+
+    // create the lexer
+    mp_lexer_t *lex = mp_lexer_new_from_str_len(MP_QSTR__lt_string_gt_, str, str_len, 0);
+
     return mp_parse_compile_execute(lex, parse_input_kind, globals, locals);
 }
 

py/builtinimport.c

@@ -50,11 +50,18 @@
 #define DEBUG_PRINT (1)
 #define DEBUG_printf DEBUG_printf
 #else // don't print debugging info
+#define DEBUG_PRINT (0)
 #define DEBUG_printf(...) (void)0
 #endif
 
 #define PATH_SEP_CHAR '/'
 
+bool mp_obj_is_package(mp_obj_t module) {
+    mp_obj_t dest[2];
+    mp_load_method_maybe(module, MP_QSTR___path__, dest);
+    return dest[0] != MP_OBJ_NULL;
+}
+
 STATIC mp_import_stat_t stat_dir_or_file(vstr_t *path) {
     //printf("stat %s\n", vstr_str(path));
     mp_import_stat_t stat = mp_import_stat(vstr_str(path));
@@ -70,17 +77,18 @@ STATIC mp_import_stat_t stat_dir_or_file(vstr_t *path) {
 }
 
 STATIC mp_import_stat_t find_file(const char *file_str, uint file_len, vstr_t *dest) {
-    // extract the list of paths
-    mp_uint_t path_num = 0;
-    mp_obj_t *path_items;
 #if MICROPY_PY_SYS
+    // extract the list of paths
+    mp_uint_t path_num;
+    mp_obj_t *path_items;
     mp_obj_list_get(mp_sys_path, &path_num, &path_items);
-#endif
 
     if (path_num == 0) {
+#endif
         // mp_sys_path is empty, so just use the given file name
         vstr_add_strn(dest, file_str, file_len);
         return stat_dir_or_file(dest);
+#if MICROPY_PY_SYS
     } else {
         // go through each path looking for a directory or file
         for (mp_uint_t i = 0; i < path_num; i++) {
@@ -101,6 +109,7 @@ STATIC mp_import_stat_t find_file(const char *file_str, uint file_len, vstr_t *d
         // could not find a directory or file
         return MP_IMPORT_STAT_NO_EXIST;
     }
+#endif
 }
 
 STATIC void do_load(mp_obj_t module_obj, vstr_t *file) {
@@ -109,7 +118,12 @@ STATIC void do_load(mp_obj_t module_obj, vstr_t *file) {
 
     if (lex == NULL) {
         // we verified the file exists using stat, but lexer could still fail
-        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ImportError, "No module named '%s'", vstr_str(file)));
+        if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+            nlr_raise(mp_obj_new_exception_msg(&mp_type_ImportError, "module not found"));
+        } else {
+            nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ImportError,
+                "no module named '%s'", vstr_str(file)));
+        }
     }
 
     #if MICROPY_PY___FILE__
@@ -122,7 +136,7 @@ STATIC void do_load(mp_obj_t module_obj, vstr_t *file) {
     mp_parse_compile_execute(lex, MP_PARSE_FILE_INPUT, mod_globals, mod_globals);
 }
 
-mp_obj_t mp_builtin___import__(mp_uint_t n_args, mp_obj_t *args) {
+mp_obj_t mp_builtin___import__(mp_uint_t n_args, const mp_obj_t *args) {
 #if DEBUG_PRINT
     DEBUG_printf("__import__:\n");
     for (mp_uint_t i = 0; i < n_args; i++) {
@@ -268,7 +282,12 @@ mp_obj_t mp_builtin___import__(mp_uint_t n_args, mp_obj_t *args) {
                 {
                 #endif
                     // couldn't find the file, so fail
-                    nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ImportError, "No module named '%s'", qstr_str(mod_name)));
+                    if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
+                        nlr_raise(mp_obj_new_exception_msg(&mp_type_ImportError, "module not found"));
+                    } else {
+                        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ImportError,
+                            "no module named '%s'", qstr_str(mod_name)));
+                    }
                 }
             } else {
                 // found the file, so get the module
@@ -280,6 +299,14 @@ mp_obj_t mp_builtin___import__(mp_uint_t n_args, mp_obj_t *args) {
 
                 module_obj = mp_obj_new_module(mod_name);
 
+                // if args[3] (fromtuple) has magic value False, set up
+                // this module for command-line "-m" option (set module's
+                // name to __main__ instead of real name).
+                if (i == mod_len && fromtuple == mp_const_false) {
+                    mp_obj_module_t *o = module_obj;
+                    mp_obj_dict_store(o->globals, MP_OBJ_NEW_QSTR(MP_QSTR___name__), MP_OBJ_NEW_QSTR(MP_QSTR___main__));
+                }
+
                 if (stat == MP_IMPORT_STAT_DIR) {
                     DEBUG_printf("%s is dir\n", vstr_str(&path));
                     // https://docs.python.org/3/reference/import.html

py/builtintables.c

@@ -61,6 +61,9 @@ STATIC const mp_map_elem_t mp_builtin_object_table[] = {
     { MP_OBJ_NEW_QSTR(MP_QSTR_int), (mp_obj_t)&mp_type_int },
     { MP_OBJ_NEW_QSTR(MP_QSTR_list), (mp_obj_t)&mp_type_list },
     { MP_OBJ_NEW_QSTR(MP_QSTR_map), (mp_obj_t)&mp_type_map },
+#if MICROPY_PY_BUILTINS_MEMORYVIEW
+    { MP_OBJ_NEW_QSTR(MP_QSTR_memoryview), (mp_obj_t)&mp_type_memoryview },
+#endif
     { MP_OBJ_NEW_QSTR(MP_QSTR_object), (mp_obj_t)&mp_type_object },
 #if MICROPY_PY_BUILTINS_PROPERTY
     { MP_OBJ_NEW_QSTR(MP_QSTR_property), (mp_obj_t)&mp_type_property },
@@ -88,6 +91,9 @@ STATIC const mp_map_elem_t mp_builtin_object_table[] = {
     { MP_OBJ_NEW_QSTR(MP_QSTR_any), (mp_obj_t)&mp_builtin_any_obj },
     { MP_OBJ_NEW_QSTR(MP_QSTR_bin), (mp_obj_t)&mp_builtin_bin_obj },
     { MP_OBJ_NEW_QSTR(MP_QSTR_callable), (mp_obj_t)&mp_builtin_callable_obj },
+#if MICROPY_PY_BUILTINS_COMPILE
+    { MP_OBJ_NEW_QSTR(MP_QSTR_compile), (mp_obj_t)&mp_builtin_compile_obj },
+#endif
     { MP_OBJ_NEW_QSTR(MP_QSTR_chr), (mp_obj_t)&mp_builtin_chr_obj },
     { MP_OBJ_NEW_QSTR(MP_QSTR_dir), (mp_obj_t)&mp_builtin_dir_obj },
     { MP_OBJ_NEW_QSTR(MP_QSTR_divmod), (mp_obj_t)&mp_builtin_divmod_obj },
@@ -112,6 +118,7 @@ STATIC const mp_map_elem_t mp_builtin_object_table[] = {
     { MP_OBJ_NEW_QSTR(MP_QSTR_pow), (mp_obj_t)&mp_builtin_pow_obj },
     { MP_OBJ_NEW_QSTR(MP_QSTR_print), (mp_obj_t)&mp_builtin_print_obj },
     { MP_OBJ_NEW_QSTR(MP_QSTR_repr), (mp_obj_t)&mp_builtin_repr_obj },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_round), (mp_obj_t)&mp_builtin_round_obj },
     { MP_OBJ_NEW_QSTR(MP_QSTR_sorted), (mp_obj_t)&mp_builtin_sorted_obj },
     { MP_OBJ_NEW_QSTR(MP_QSTR_sum), (mp_obj_t)&mp_builtin_sum_obj },
 
@@ -136,7 +143,6 @@ STATIC const mp_map_elem_t mp_builtin_object_table[] = {
     { MP_OBJ_NEW_QSTR(MP_QSTR_RuntimeError), (mp_obj_t)&mp_type_RuntimeError },
     { MP_OBJ_NEW_QSTR(MP_QSTR_StopIteration), (mp_obj_t)&mp_type_StopIteration },
     { MP_OBJ_NEW_QSTR(MP_QSTR_SyntaxError), (mp_obj_t)&mp_type_SyntaxError },
-    { MP_OBJ_NEW_QSTR(MP_QSTR_SystemError), (mp_obj_t)&mp_type_SystemError },
     { MP_OBJ_NEW_QSTR(MP_QSTR_SystemExit), (mp_obj_t)&mp_type_SystemExit },
     { MP_OBJ_NEW_QSTR(MP_QSTR_TypeError), (mp_obj_t)&mp_type_TypeError },
     { MP_OBJ_NEW_QSTR(MP_QSTR_ValueError), (mp_obj_t)&mp_type_ValueError },
@@ -212,6 +218,12 @@ STATIC const mp_map_elem_t mp_builtin_module_table[] = {
 #if MICROPY_PY_URE
     { MP_OBJ_NEW_QSTR(MP_QSTR_ure), (mp_obj_t)&mp_module_ure },
 #endif
+#if MICROPY_PY_UHEAPQ
+    { MP_OBJ_NEW_QSTR(MP_QSTR_uheapq), (mp_obj_t)&mp_module_uheapq },
+#endif
+#if MICROPY_PY_UHASHLIB
+    { MP_OBJ_NEW_QSTR(MP_QSTR_uhashlib), (mp_obj_t)&mp_module_uhashlib },
+#endif
 
     // extra builtin modules as defined by a port
     MICROPY_PORT_BUILTIN_MODULES

py/compile.c

@@ -233,6 +233,11 @@ STATIC mp_parse_node_t fold_constants(compiler_t *comp, mp_parse_node_t pn, mp_m
                         }
                     } else if (MP_PARSE_NODE_IS_TOKEN_KIND(pns->nodes[1], MP_TOKEN_OP_DBL_MORE)) {
                         // int >> int
+                        if (arg1 >= BITS_PER_WORD) {
+                            // Shifting to big amounts is underfined behavior
+                            // in C and is CPU-dependent; propagate sign bit.
+                            arg1 = BITS_PER_WORD - 1;
+                        }
                         pn = mp_parse_node_new_leaf(MP_PARSE_NODE_SMALL_INT, arg0 >> arg1);
                     } else {
                         // shouldn't happen