robert-hh 01c046d2a8 rp2/machine_uart: Implement a Python UART IRQ handler. ...

Supported trigger names: IRQ_RXIDLE, IRQ_TXIDLE, IRQ_BREAK

- IRQ_RXIDLE: The handler for IRQ_RXIDLE is called reliably 31 UART bit
  times after the last incoming data.

- IRQ_TXIDLE: This IRQ is triggered after at least >5 characters are sent
  at once.  It is triggered when the TX FIFO falls below 4 elements.  At
  that time, up to 5 bytes may still be in the FIFO and output shift
  register.

- IRQ_BREAK: The IRQ triggers if a BREAK state is detected at RX.
  Properties & side effects:
  - After a BREAK, a valid character must be received before another break
    can be detected.
  - Each break puts a 0xff character into the input buffer.

The irq.flags() value is cleared only with a new wanted event.  Do not
change the flags otherwise.

Signed-off-by: robert-hh <robert@hammelrath.com>

2024-08-29 16:27:43 +10:00

404 B

Raw Permalink Blame History

View Raw