Passing a rectangle with zero width or height to xdg_shell-v6
set_anchor_rect() will cause a protocol error and terminate the client,
as with gedit when pressing the Win key.
Reason for this is because the rectangle used to set the anchor comes
from gtk_text_layout_get_iter_location() which uses the pango layout
width/height, which can be empty if there is not character at the given
location.
Make sure we don't use 0 as width or height as an anchor rectangle to
avoid the protocol error, and compensate the logical position of the
given rectangle if the size is changed, so that the actual position
remains as expected by the client.
https://bugzilla.gnome.org/show_bug.cgi?id=777176
Images with just an aspect ratio, but without a size, should be scaled
to be fully visible in the given area.
But we scaled them to completely cover the given area, which made them
partially invisible.
Reftest included.
Windows WM handles AeroSnap for normal windows on keydown. We did this
on keyup only because we do not get a keydown message, even if Windows WM
does nothing with a combination. However, in some specific cases it DOES
do something - and we have no way to detect that. Specifically, winkey+downarrow
causes maximized window to be restored by WM, and GDK fails to detect that. Then
GDK gets a keyup message, figures that winkey+downarrow was pressed and released,
and handles the combination - by minimizing the window.
To overcome this, install a low-level keyboard hook (high-level ones have
the same problem as normal message loop - they don't get messages when
Windows WM handles combinations) and use it to detect interesting key combinations
before Windows WM has a chance to block them from being processed.
Once an interesting combination is detected, post a message to the window, which
will be handled in due order.
It should be noted that this code handles key repetitions in a very crude manner.
The downside is that AeroSnap will not work if hook installation function call fails.
Also, this is a global hook, and if the hook procedure does something wrong, bad things
can happen.
https://bugzilla.gnome.org/show_bug.cgi?id=776031
Instead of using some kind of flawed logic about modifying a keypress result
when CapsLock is toggled, just add a CapsLock shift level (and all derived
shift levels, i.e. Shift+CapsLock and CapsLock+AltGr and Shift+CapsLock+AltGr)
and query Windows keyboard layout API about the result of keypresses involving
CapsLock.
Keysym table is going to be (roughly) twice as large now, but CapsLock'ed
keypresses will give correct results for some keyboard layouts (such as
Czech keyboard layout, which without this change produces lowercase letters
for CapsLock->[0,2,3,4...] instead of uppercase ones).
Keymap update time also increases accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=165385
Also, "ie" wasn't very clear, but fixing that to "i.e." would cause
truncation of the summary when processed by bindings using doxygen. So,
I replaced it with "in other words", which is no _less_ clear, at least.
We have a frame clock that ensures rendering is done as per the
output vsync. There is no need to have Mesa do the same for us.
This, most notably, ensures Mesa doesn't schedule frame callbacks
that will be left unattended if the compositor stops throttling
frames for its surface, this is eg. the case if the toplevel is
moved to another workspace.
Also, given a SwapInterval!=0 will always bring these unexpected
side effects, check that it's possible to disable it, and spew
a debug message if that isn't the case.
https://bugzilla.gnome.org/show_bug.cgi?id=769835
drag-data-delete is emitted based on the interchange of the
DELETE atom, which may well be set or bypassed locally by
the app. As such emitting it here is not right, the other
paths handling the DELETE atom interchange are still valid
and there.
https://bugzilla.gnome.org/show_bug.cgi?id=774726
If there are no targets, DnD is probably intended to be local,
add a mimetype for matching then. The wayland protocol requires
at least one wl_data_offer.target call with the mimetype selected
for transfer.
Instead of checking for window state and giving it extra styles that
fit, just give it all styles that it is missing. It turned out that
otherwise it is impossible to, for example, restore a maximized window
via sysmenu. Also, be more flexible towards GDK/WM window state mismatches
and consider the window minimized/maximized if *either* GDK or WM thinks so.
https://bugzilla.gnome.org/show_bug.cgi?id=776485
Just set check_for_dpi_awareness = TRUE and eventually it will be handled
correctly, even if setDpiAwareFunc() returns E_ACCESSDENIED or shcore functions
are NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=777031
When a subsurface is used as a parent of a popup, GDK needs to traverse
up to the transient-for as the next parent, to properly find the parent
used by the popup positioner. This is because the parent of a popup
must always either be an xdg_popup or an xdg_surface, but traversing
the "parent" (in GDK terms) upwards from a subsurface will end up on
the fake root window before we hit the actual parent (in Wayland terms).
https://bugzilla.gnome.org/show_bug.cgi?id=776225
See the implementation of gtk_entry_create_layout():
pango_attr_list_splice() is used to add the PangoAttrList of the preedit
string. And that is done *after* applying the PangoAttrList of the
"attributes" property.
https://bugzilla.gnome.org/show_bug.cgi?id=776868
...which treats the first '.' in doc comments as the end of the summary.
So, e.g., in gtkmm, get_kinetic_scrolling() is currently summarised as
"Changes the behaviour of @scrolled_window wrt." Not very informative!
No need for a period there & anyway, the phrase "wrt to" is superfluous,
and we have space to actually say "with regard to", so just do that now.
If the signal handler ends up changing the label text,
the link is no longer around to update the css node.
Check for this possibility to avoid a crash here.
When primary monitor is smaller than the actual monitor on which the
window is being maximized, the WM will do widnow size adjustments
that will completely screw the window size if we try to make it
smaller than 100% fullscreen (to account for taskbar size, for example).
Fix this by overriding maximized window size during WM_WINDOWPOSCHANGING.
https://bugzilla.gnome.org/show_bug.cgi?id=775808
When running uninstalled tests with GtkApplication on an autobuilder with
a fake session bus, warnings will cause the tests to abort. The GNOME
session manager, the Xfce session manager, and the Inhibit portal are all
not needed for normal operation of GTK, so we should not log warnings if
they are not found.
As well as not being present on a fake session bus, it's also not
expected that they'll be present on all platforms.
https://bugzilla.gnome.org/show_bug.cgi?id=774784
... with gtk_list_box_get_row_at_y. It would be nice to avoid the
'find' versus 'get' discrepancy since we are planning to expose it as
public API.
https://bugzilla.gnome.org/show_bug.cgi?id=776187
For subsurfaces, the new state which includes the input shape is not
applied by the compositor if the subsurface is in effective synchronous
mode.
So we need to apply the input shape once parent surface is in effective
desynchronized mode, which is when it's committed, otherwise the input
shape may never be applied if the widget is not using being_paint() /
end_paint() to draw on its subsurface, like clutter does.
We do that only for empty input shape as those won't need update when
the subsurface is resized, for all other non-empty input shape, the
client still has to use begin_paint()/end_paint() for the input shape to
be applied.
https://bugzilla.gnome.org/show_bug.cgi?id=774534
We check when we realize the GdkGLContext, but we never use the check
before using the API, and it breaks on drivers that do not implement the
extension, or on drivers that only support OpenGL ES 2.0.
When the background-clip of the background is smaller than the
background-clip of blended images, not pushing a group is wrong.
Test testing exactly that included.
Wayland subsurfaces can have other native window parents, but those need
to be destroyed along with the rest of the window hierarchy otherwise
an assert() is reached.
https://bugzilla.gnome.org/show_bug.cgi?id=774915
For a menu mode CB with wrap_width == 0 and an active item, that item is
selected in gtk_combo_box_menu_popup. Selection causes the MenuShell to
activate and hence take a grab. This was done before the menu was popped
up. A patch distributed in Debian sid - after being proposed on our BZ -
revealed that on the 1st popup of any such ComboBox, within grab_add,
the MenuShell's toplevel's GdkWindow is NULL. This causes a Gdk-CRITICAL
assertion fail on the 1st time opening any such CB, on Debian and if
that patch were merged to GTK+. By selecting after popup, we ensure the
MenuShell is realised before its grab_add and so avoid the critical.
https://bugzilla.gnome.org/show_bug.cgi?id=771242
gdk_window_get_toplevel() walks up the windows tree looking for the
corresponding toplevel window, but needs to account for subsurfaces as
well on Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=775319
The recent Wintab testing revealed an interesting edge case: we cannot
for certain say that windowing system messages will not be received
while the default display and its device manager are still being set up.
We've ruled out the Wintab case now, but cannot rule out some future bit
of runtime DLL code doing stuff at this critical time.
This commit detects and avoids a potential null pointer dereference in
the message handling code while detecting grabs. Grabs don't really
exist yet, if the default display and/or its device manager are not yet
globally known.
https://bugzilla.gnome.org/show_bug.cgi?id=774379
We were producing org.symbolic.png from org.gnome.Recipes-symbolic.svg,
which is not useful. Look for the last dot in the original name, to
produce the expected org.gnome.Recipes-symbolic.symbolic.png instead.
Now that subsurfaces can be created as child of another GdkWindow (and
not just the root window), they must be placed according to the location
of their parent, i.e. the abs_x/abs_y must be updated and taken into
account when placing and moving subsurfaces under Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=774917
Since at-spi-atk commit 96621a5e95 fixed PropertyChange notifications
for AccessibleParent, setting the parent will result in a call to
ref_state_set() which assumes that the object is fully initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=774939
While GtkEventController implementations today are all GtkGesture, it is
possible to create a GtkEventController manually. This is an extrac check
to ensure we only add gestures to the list.
https://bugzilla.gnome.org/show_bug.cgi?id=774760
Only attempt to initialize Wintab after the display manager announces
that the first default display has been set. Fixes a segfault during
initialization of specific tablet drivers' wintab32.dlls. Add assertions
and verbose comments explaining this nonsense because this stuff is a
pain to have to keep fixing.
https://bugzilla.gnome.org/show_bug.cgi?id=774379
Move the orientation sanity-checks into the packet decode func.
Rationale: the packet handling func may otherwise read beyond the end of
device->last_axis_data.
Also expand them to cope with my test Huion's weird reporting.
Also correct the azimuth angle to align with GDK's presentation.
Most importantly, fix annoying comment typo.
https://bugzilla.gnome.org/show_bug.cgi?id=774265
Fix a regression introduced in 4ce6d10601
which causes devices with an odd-numbered zero-based index in the list
to be passed over incorrectly. This might present as yet another "device
does not send pressure" bug for ~50% of devices out there.
This commit also closes off another potential segfault for wintab_devices
lists which have an odd length.
https://bugzilla.gnome.org/show_bug.cgi?id=774699
When checking if a rectangle is contained by the rounded box, the code
will refuse a rectangle which is the exact size as the one backing the
rounded box, since it checks for greater or equal width and height.
Check for greater only instead.
https://bugzilla.gnome.org/show_bug.cgi?id=774114
Under Wayland, a subsurface can have another surface as parent, but
gdk would not allow native windows if the parent is not the root window.
Allow native subsurface for all parent under Wayland, not just for the
root window.
https://bugzilla.gnome.org/show_bug.cgi?id=774475
This can be triggered on workspace switches, and on hidpi results in
the scale factor being reset to 1 while the window is not in the
current workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=774476
After building GDK with broadway, we need to copy the GDK DLL from
[Release|Debug]_Broadway\bin to [Release|Debug]\bin, so that the
introspection builds can be done normally with CFG=[Release|Debug]. As we
renamed the projects, we needed to update the property sheets that does
the copying, which was accidently missed. Fix that.
Unlike other container widgets, GtkStack would allocate its children
prior to moving its windows, which might prevent further valid size
allocation signals to be emitted.
Re-order the size allocation of child widgets to be performed after
moving the GtkStack windows.
Thanks to Owen for spotting the real issue here.
https://bugzilla.gnome.org/show_bug.cgi?id=767713
We want to look for the gdk-pixbuf-2.0 package, and we should leave a space
between -ldwmapi and -lzlib1 when we enable Broadway.
Also copy the generated gdk-3.0.pc and gtk+-3.0.pc as gdk-win32-3.0.pc and
gtk+-win32-3.0.pc respectively, to be in-line with the autotools builds.
As in the last commit on gdkdisplay-win32.c, we need to define that to be
0x0600 (Vista) or later so that the items needed in the Windows headers be
activated.
See: https://bugzilla.gnome.org/show_bug.cgi?id=768081#c62
... to be for Vista (0x0600) or later. This is so that the necessary
items in the Windows headers be activated so that the code will build
properly on mingw-w64, and we already require Vista or later for GTK+.
Thanks Ting-Wei Lan for pointing this out.
See: https://bugzilla.gnome.org/show_bug.cgi?id=768081#c62
This fixes a DOS where any app can cause all running gtk apps
to use arbitrary amounts of memory.
Originally reported against mate-panel, where running a big slideshow
in eye-of-mate caused increasing RAM usage in mate-panel.
v2: Hardcode the value
Signed-off-by: Lauri Kasanen <curaga@operamail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=773587
The monitors are already in scaled pixels, so scaling again when retrieving
the screen size is wrong.
With GDK_SCALE unset, the initial monitor sizes are unscaled, and when the
xsettings client sets a scale > 1, the monitor sizes should be updated.
The end result is that the monitor sizes start out wrong, and get
corrected on the first xrandr event, while the screen size starts out
right and becomes wrong after the event.
This patch fixes Firefox misplacing menus and popovers when the xrandr
configuration changes while it is running.
Fix for the X11 side of
https://bugzilla.gnome.org/show_bug.cgi?id=772202
Making sure the surfaces are using the same scale factor makes it more
likely a fast path will be used when pixman gets involved, as pointed
out by Benjamin Otte.
https://bugzilla.gnome.org/show_bug.cgi?id=772075
We are currently truncating job names to 255 bytes, because that's the
maximum allowed length of job-name attribute in CUPS. This is a CUPS
limitation that GtkPrintOperation shouldn't need to know, and it
shouldn't affect other backends, that might have other limitations or
even no limitation at all. This has another side effect, that what you
set as GtkPrintOperation:job-name could be different to what you get if
the property is truncated, this is not documented in
gtk_print_operation_set_job_name(). So, I think the job name should be
truncated by the CUPS backend, right before setting the job-name
attribute.
https://bugzilla.gnome.org/show_bug.cgi?id=774097
The GApplication platform data may contain a startup ID that on X11
is used to set the startup notification ID when activated. Do the
same on the wayland backend to make startup notifications work for
DBus-activated applications where the DESKTOP_STARTUP_ID environment
variable is not set.
https://bugzilla.gnome.org/show_bug.cgi?id=768531
For wayland clients, the startup notification ID is currently only set
from the DESKTOP_STARTUP_ID environment variable. As that variable is
only set for clients launched via exec(), startup completion is not
indicated correctly for DBus-activated applications unless an explicit
ID is specified - usually that is not the case, as the default handling
uses gdk_notify_startup_complete().
To address this, we need API to set the startup notification ID from GTK
as we have on X11.
https://bugzilla.gnome.org/show_bug.cgi?id=768531
This enables HiDPI support for GTK+ on Windows, so that the
fonts and window look better on HiDPI displays. Notes for the current
work:
-The DPI awareness enabling can be disabled if and only if an application
manifest is not embedded in the app to enable DPI awareness AND a user
compatibility setting is not set to limit DPI awareness for the app, via
the envvar GDK_WIN32_DISABLE_HIDPI. The app manifest/user setting for
DPI awareness will always win against the envvar, and so the HiDPI items
will be always setup in such scenarios, unless DPI awareness is disabled.
-Both automatic detection for the scaling factor and setting the scale
factor using the GDK_SCALE envvar are supported, where the envvar takes
precedence, which will therefore disable automatic scaling when
resolution changes.
-I am unable to test the wintab items because I don't have such devices
around.
https://bugzilla.gnome.org/show_bug.cgi?id=768081
GtkLevelBar supports adding custom offsets as style classes, and they
are applied whenever the :value property matches. The current code,
however, only updates any CSS nodes when an offset is found, causing
it to not update when a discrete value changes but no custom offset
is added.
Fix that by always updating the CSS nodes.
https://bugzilla.gnome.org/show_bug.cgi?id=773799
This way we can recommend that applications use the
fullscreen_on_monitor() API on both X and Wayland otherwise they'd
have to keep a path for each backend to achieve this functionality.
https://bugzilla.gnome.org/show_bug.cgi?id=773857
gdk_wayland_window_attach_image() is normally called from
gdk_window_end_paint() to notify the compositor of newly staged drawing.
If any of the drawing code inadvertently dispatches the wayland event
loop (for instance with a gdk_flush() call), then it's possible that by
the time gdk_window_end_paint() is called, the staged drawing is already
destroyed.
This commit bypasses the attach_image call in scenarios where the staged
drawing is prematurely dropped.
https://bugzilla.gnome.org/show_bug.cgi?id=773274
Update the GDKGL implementation:
-Allow legacy contexts to be created.
-Use finer-grained attributes to ask for a pixel format when possible,
which also adds support for anti-aliasing
In fact the changes here are required for GTKGL to work properly on
Windows for 4.x.
Note that creation of gles contexts are not done here, as the system does
not support such contexts directly on Windows, but only through means such
as ANGLE, which is a totally different issue here.
https://bugzilla.gnome.org/show_bug.cgi?id=773528
For some reason we end up allocating the colorplane widget
before it is realized, and then never initialize the surface.
Fix this by explicitly doing it on realize.
https://bugzilla.gnome.org/show_bug.cgi?id=773474
GDK defaults to asking for an OpenGL 3.2 Core Profile, but if we get a
legacy profile from the underlying windowing system, the OpenGL version
will be fixed to 3.0. If that happens, we need to set the legacy bit on
the GdkGLContext, since that bit will be used to determine the version
and type of GLSL shaders that will be used by application and toolkit
code alike.
(cherry picked from commit 31c05771e9)
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
Now that the use_es field is an int with a possible negative value, we
cannot use it its truth value directly; we need to check if it's a
positive value, instead.
(cherry picked from commit 8e85f55240)
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
With best-effort, try to use gdk_window_move_to_rect() more often, when
all pieces fit together. For the non-legacy paths to be triggered for
when gtk_menu_popup_for_device() or gtk_menu_popup() were used, the
following conditions must be met:
1) There is no custom positioning function specified
2) The menu is attached to a widget (using gtk_menu_attach_to_widget())
3) There is a associated grab device
https://bugzilla.gnome.org/show_bug.cgi?id=772922
xdg_shell v6 allows grabless popups, whose behavior is not that
different from override redirect windows with no grab to take
keyboard input (and pointer events outside).
This means we can relax the requirement to have a grab before
creating an xdg_popup. The warning is still useful to have so
people stop relying on gdk_window_show();gdk_device_grab() being
an ok pattern to popup a window, it's been moved to wayland
implementation of gdk_device_grab() instead, so we warn if trying
to grab a GDK_WINDOW_TEMP window that's already visible.
https://bugzilla.gnome.org/show_bug.cgi?id=771694
the darker bottom border used on buttons looks bad on circular ones
so now a gradient clipped on the border-box and a transparent
border is used in that partcular case.
See https://bugzilla.gnome.org/show_bug.cgi?id=771205 for details.
$button_fill contains the background-image property value of
buttons, having it readable outside the drawing mixin allows, for
example, stacking background images in an easier way.
Make the Makefile.am targets for generating the Visual Studio projects re-generate the
project files and the header listings whenever the Makefile.am's that include
build/Makefile.msvcproj changes, so that whenever a source/header is added, they will
be reflected in the projects and in the property sheets that are used to copy the
headers.
Also ensure that these are applied to the vs11, vs12 and vs14 projects when this
happens, as they are copied and processed from the Visual Studio 2010 projects.
This allows the use of a "text-direction" hint set to one of "none", "rtl",
or "ltr" to enforce the text direction of a "horizontal-buttons"
display-hint.
This is useful when a menu has buttons that map to physical space in the
UI and therefore must match the application widgetry.
https://bugzilla.gnome.org/show_bug.cgi?id=772775
gtk_widget_destroy() removes widgets from their container. However
_internal_ widgets must be unref'ed using gtk_widget_unparent() instead.
This is symmetric with the fact that these widgets were ref'ed by direct
call to gtk_widget_set_parent(). It's also the method that was used in
gtk_headerbar_destroy().
https://bugzilla.gnome.org/show_bug.cgi?id=772859
> Due to Gtk+ keeping a reference to the window internally,
> gtk_window_new() does not return a reference to the caller.
> To delete a GtkWindow, call gtk_widget_destroy().
Caller(s) aren't expecting a need to delete help_overlay themselves
once they've installed it. (E.g. see gtk_application_window_added()).
I didn't notice any direct precedents, but there's a parallel in the
current implementation of gtk_container_destroy() which uses
gtk_widget_destroy() on any added widget.
This avoids leaking 100s of kB per window, when I tested nautilus.
https://bugzilla.gnome.org/show_bug.cgi?id=772859
ClutterEmbed on Wayland uses a subsurface and relocates it on configure
events, but when placed within a scrolled window, no configure event is
emitted and the ClutterEmbed subsurface remains static.
Emit a configure event for native windows in GdkWindow's internal
move_native_children() so that custom widgets relying on configure
events such as ClutterEmbed can relocate their stuff.
Similarly, when switching to/from normal/maximized/fullscreen states
which change the shadows' size and possibly shows/hides a header bar,
we need to emit a configure event even if the abs_x/abs_y haven't
changed to make sure the subsurface is size appropriately.
https://bugzilla.gnome.org/show_bug.cgi?id=771320https://bugzilla.gnome.org/show_bug.cgi?id=767713
These functions don't work well on backends without global
coordinates (such as Wayland or Mir), and the gtk_menu_popup_at_
variants are better alternatives.
https://bugzilla.gnome.org/show_bug.cgi?id=772552
to hilight drop target there is a wildcard selector which turns
the border and shadow to green, this clearly shouldn't happen when
the whole window is a drop target.
...by putting it in a stack. The busy_spinner and eject_button are
mutually exclusive, but only the latter was coded to ensure that its
visibility did not cause the rest of the row to reflow. By putting both
widgets in a stack and setting child_visible on that, the row allocates
enough space to show one - or none - at once, avoiding any misalignment.
https://bugzilla.gnome.org/show_bug.cgi?id=772345https://bugzilla.gnome.org/show_bug.cgi?id=772348
Calling eglGetDisplay forces libEGL to guess what kind of pointer you
passed it. Different EGL libraries will do different things here, and in
particular glvnd will do something different than Mesa. Since we do have
an API that allows us to explicitly type the display, use it.
The explicit call to eglGetProcAddress is working around a bug in
libepoxy 1.3, which does not understand the EGL concept of client
extensions. Since it does not, the normal epoxy resolver for
eglGetPlatformDisplayEXT would not find any provider for that entry
point, and crash when you attempted to call it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=772415
We currently beep when a character is appended at the end in
overwrite mode. That is obviously not right. Patch based on
a patch by Ian MacDonald.
https://bugzilla.gnome.org/show_bug.cgi?id=772389
13 bytes in 1 blocks are definitely lost in loss record 766 of 16,875
at 0x4C2DB9D: malloc (vg_replace_malloc.c:299)
by 0xA9D0247: vasprintf (in /usr/lib64/libc-2.24.so)
by 0xA2453FC: g_vasprintf (gprintf.c:316)
by 0xA2152F7: g_strdup_vprintf (gstrfuncs.c:514)
by 0xA21539C: g_strdup_printf (gstrfuncs.c:540)
by 0x678F25C: gdk_rgba_to_string (gdkrgba.c:360)
by 0x5FAE00D: rgba_to_string_noalpha (gtkicontheme.c:4322)
by 0x5FAE6F2: gtk_icon_info_load_symbolic_svg (gtkicontheme.c:4492)
by 0x5FAED4F: gtk_icon_info_load_symbolic_internal (gtkicontheme.c:4622)
by 0x5FAEEE8: gtk_icon_info_load_symbolic (gtkicontheme.c:4711)
by 0x5F00246: gtk_css_image_recolor_load (gtkcssimagerecolor.c:118)
by 0x5F003E4: gtk_css_image_recolor_compute (gtkcssimagerecolor.c:170)
14 bytes in 1 blocks are definitely lost in loss record 801 of 16,875
at 0x4C2DB9D: malloc (vg_replace_malloc.c:299)
by 0xA9D0247: vasprintf (in /usr/lib64/libc-2.24.so)
by 0xA2453FC: g_vasprintf (gprintf.c:316)
by 0xA2152F7: g_strdup_vprintf (gstrfuncs.c:514)
by 0xA21539C: g_strdup_printf (gstrfuncs.c:540)
by 0x678F25C: gdk_rgba_to_string (gdkrgba.c:360)
by 0x5FAE00D: rgba_to_string_noalpha (gtkicontheme.c:4322)
by 0x5FAE68E: gtk_icon_info_load_symbolic_svg (gtkicontheme.c:4482)
by 0x5FAED4F: gtk_icon_info_load_symbolic_internal (gtkicontheme.c:4622)
by 0x5FAEEE8: gtk_icon_info_load_symbolic (gtkicontheme.c:4711)
by 0x5F00246: gtk_css_image_recolor_load (gtkcssimagerecolor.c:118)
by 0x5F003E4: gtk_css_image_recolor_compute (gtkcssimagerecolor.c:170)
15 bytes in 1 blocks are definitely lost in loss record 838 of 16,875
at 0x4C2DB9D: malloc (vg_replace_malloc.c:299)
by 0xA9D0247: vasprintf (in /usr/lib64/libc-2.24.so)
by 0xA2453FC: g_vasprintf (gprintf.c:316)
by 0xA2152F7: g_strdup_vprintf (gstrfuncs.c:514)
by 0xA21539C: g_strdup_printf (gstrfuncs.c:540)
by 0x678F25C: gdk_rgba_to_string (gdkrgba.c:360)
by 0x5FAE00D: rgba_to_string_noalpha (gtkicontheme.c:4322)
by 0x5FAE6C3: gtk_icon_info_load_symbolic_svg (gtkicontheme.c:4487)
by 0x5FAED4F: gtk_icon_info_load_symbolic_internal (gtkicontheme.c:4622)
by 0x5FAEEE8: gtk_icon_info_load_symbolic (gtkicontheme.c:4711)
by 0x5F00246: gtk_css_image_recolor_load (gtkcssimagerecolor.c:118)
by 0x5F003E4: gtk_css_image_recolor_compute (gtkcssimagerecolor.c:170)
16,384 bytes in 1 blocks are definitely lost in loss record 16,847 of 16,875
at 0x4C2DADE: malloc (vg_replace_malloc.c:298)
by 0x4C2FC91: realloc (vg_replace_malloc.c:785)
by 0xA1F89FA: g_realloc (gmem.c:159)
by 0xA1BAD2E: g_array_maybe_expand (garray.c:779)
by 0xA1BA566: g_array_set_size (garray.c:555)
by 0xA1BBCB8: g_byte_array_set_size (garray.c:1752)
by 0x8D1CC48: g_file_load_contents (gfile.c:6766)
by 0x5FAE767: gtk_icon_info_load_symbolic_svg (gtkicontheme.c:4501)
by 0x5FAED4F: gtk_icon_info_load_symbolic_internal (gtkicontheme.c:4622)
by 0x5FAEEE8: gtk_icon_info_load_symbolic (gtkicontheme.c:4711)
by 0x5F00246: gtk_css_image_recolor_load (gtkcssimagerecolor.c:118)
by 0x5F003E4: gtk_css_image_recolor_compute (gtkcssimagerecolor.c:170)
https://bugzilla.gnome.org/show_bug.cgi?id=772215
The relative-to widget may be reparented itself into/out of a
scrollable. In this cases make the hierachy-changed handler to
unset the parent scrollable when unparented, and look up again
the parent scrollable after it's reparented.
https://bugzilla.gnome.org/show_bug.cgi?id=771812
gtk_popover_set_scrollable_full() takes care of the signal connected
on the scrollable itself, in addition to the adjustment signals the
popover listens to.
gtk_popover_update_scrollable() looks up the current relative-to
widget hierarchy and updates the current scrollable.
The places where the scrollable is being maintained have been updated
to use these functions.
https://bugzilla.gnome.org/show_bug.cgi?id=771812
Opaque region, margin and input region were only being synced when a cairo
paint happened. That caused GL paints to sometimes end up with bad state.
Move calls to sync state to gdk_window_impl_wayland_end_paint.
https://bugzilla.gnome.org/show_bug.cgi?id=771553
Setting the shadow width earlier as done with commit 4cb1b96 to address
bug 771561 proved to cause unexpected side effects on size_allocate
signal propagation.
As the window is sized correctly earlier, the size_allocate signal is
not emitted again in gtk_widget_size_allocate_with_baseline() which
prevents clutter-gtk from relocating its child widget correctly.
To avoid this issue, revert commit 4cb1b96 but make sure the values
passed as min and max size is never negative in Wayland as this is a
protocol error.
With this, the min/max size will be wrong for a short amount of time,
during the state transition, until the shadow width is updated from
gdk_window_set_shadow_width().
This approach is much safer and less intrusive than changing the
size_allocate logic in gtk.
This reverts commit 4cb1b9645e.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=771915
After checking for rendered_surface, the call to gtk_css_node_get_style
can invalidate the style and result in rendered_surface being set to
NULL. This was result in some icon views appearing blank on
Endless OS on armv7hl, and this error:
Gtk-CRITICAL **: gtk_css_style_render_icon_surface: assertion 'surface != NULL' failed
Call gtk_css_node_get_style earlier to ensure we always pass a valid
surface to gtk_css_style_render_icon_surface.
https://bugzilla.gnome.org/show_bug.cgi?id=765649https://phabricator.endlessm.com/T13524
This was meant to be silenced unless expicitly requested but
G_ENABLE_DEBUG is defined by default unless --disable-debug is passed to
configure, so use G_ENABLE_CONSISTENCY_CHECKS instead which is only
defined if --enable-debug is explicitly passed.
add circle objects to the injected style for recoloring.
Should avoid randomly colored symbolic icon bits when circles are
in the mix as in network-vpn-acquiring-symbolic for example.
Otherwise, with CSD, we could have a discrepancy where gtk uses the
right values for the shadows whereas the gdk backend still uses the old
values, leading in some cases to invalid or negative min size being
computed (which, in Wayland, leads a protocol error).
https://bugzilla.gnome.org/show_bug.cgi?id=771561
The GLib main loop blocks on MsgWaitForMultipleObjectsEx to
determine if there are any incoming messages while also allowing
for background tasks to run. If all available messages are not
processed after MsgWaitForMultipleObjectsEx has signaled that
there are available, CPU usage will skyrocket.
From my limited understanding (by inspection of profiling
under Visual Studio):
Key is pressed - MsgWaitForMultipleObjectsEx unblocks, and
sends message to GDK's event handler. Some event is now queued.
g_poll unblocks, calls the g_event_dispatch which finally
resolves to gdk_event_dispatch. This then calls
_gdk_win32_display_queue_events, but since a message is already
queued, it fails to call PeekMessage and returns immediately.
At the next iteration, g_poll again calls MsgWaitForMultipleObjectsEx
which queues yet another event and returns almost immediately, since
there are events available which haven't been processed by PeekMessage.
The dispatch function is then called and the process repeats.
https://bugzilla.gnome.org/show_bug.cgi?id=771568
The main corpus of the documentation for gtk_window_get_size() is still
full of X11-isms, so we should port it to something that is more
backend-agnostic. Additionally, having some examples would be nice for
application authors looking at a way to appropriately use this function.
If somebody decides to use gtk_widget_set_double_buffered() in the
middle of a draw() then there's the risk of calling end_draw_frame()
with an invalid pointer.
Some overeager compilers may warn about the double_buffered bit field
changing values and leading to a potentially uninitialized variable.
In order to avoid compiler warnings or crashes, we can simply store the
value of the double_buffered bit field at the beginning of the rendering
and use that instead of the actual bit field.
https://bugzilla.gnome.org/show_bug.cgi?id=771463
Not all occurrences of this warning can be fixed today, so put it behind
a G_ENABLE_DEBUG flag since it still shows legitimate problems even if
some of them are false positives.
A popup may have moved and resized when configured. Make sure every
layer knows about this and call gdk_window_move_resize() with the
configured dimension and position. This won't actually move the
window, but might resize it.
https://bugzilla.gnome.org/show_bug.cgi?id=771117
The result of move_to_rect, received from the xdg_popup.configure
event, needs to be translated to the correct coordinate space; that is
from real parent window geometry to coordinates relative to the gdk
window set as transient-for.
https://bugzilla.gnome.org/show_bug.cgi?id=771117
Use a helper to translate a coordinate from non-real GdkWindow parent
to window geometry coordinate space of the real GdkWindow parent,
meaning the coordinate space of the GdkWindow of the parent used as a
xdg_popup parent where (0, 0) is inside of the shadow margin.
https://bugzilla.gnome.org/show_bug.cgi?id=771117
When using the dynamic positioner (i.e. positioning from move_to_rect)
we can always rely on having a proper transient-for to position
relative to, so lets drop the ignored parameter.
https://bugzilla.gnome.org/show_bug.cgi?id=771117
Move the code used for calculating the result of move_to_rect
(final_rect, flipped_rect etc) closer to the other move_to_rect
functions (i.e. next to create_dynamic_positioner), and let the
xdg_popup configure handler just call the calculation function.
https://bugzilla.gnome.org/show_bug.cgi?id=771117
If an application umaps the toplevel from its popup callback, this can
lead to a protocol error.
Make sure we mark popup parent and use that to check if their parent is
the toplevel being unmapped in which case we shall unmap the popup first
to avoid the protocol error.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=770906
The fix for bug 767468 had some unintended side-effects. This is
an attempt at doing the same fix (don't grab focus when we are
grab-shadowed), while avoiding the breakage, by using GTK+'s
internal tracking for grab-shadowed-ness.
https://bugzilla.gnome.org/show_bug.cgi?id=770508
Analogous to (un)mount operation, we now keep a reference around
during the ongoing operation and make use of the destroyed flag
to check if we are still alive or if we have been cancelled as
a result of the widget being destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=764979
Since we hold on to a reference during (un)mount operations, we
don't trigger the cancellation of operations in finalize anymore.
Instead we now override the GtkWidget's destroy() and cancel any
ongoing operations there.
https://bugzilla.gnome.org/show_bug.cgi?id=764979
The current code wrongly assumes that cancellation can only happen
as a result widget finalization, and consequentially does not
properly recover from it. Therefore if the operation is cancelled
as a result of user interaction, the entry is will stay disabled
and the spinner will keep spinning. This is fixed by removal of
the early bail out in case of cancellation.
https://bugzilla.gnome.org/show_bug.cgi?id=764979
During mount and unmount opertions we keep a reference to the
GtkPlacesView around, so we have a valid view for the callback
code, even in the case that othe external references have been
dropped (i.e. the containing window gets destroyed).
https://bugzilla.gnome.org/show_bug.cgi?id=764979
RandR 1.5 is enabled on VirtualBox guest of Fedora 25 but
XRROutputInfo->name is "default". If init_randr15() does not
return TRUE, the monitor size sets 0 because gdk_screen_get_width()
returns 0.
This problem causes GtkStatusIcon not to show the activate menu.
https://bugzilla.gnome.org/show_bug.cgi?id=771033
This reverts commit 6af5033386.
Scrolled window behavior of propagating child natural sizes
has now been made optional, so there is no need to work around
this by setting a hard coded maximum content height anymore.
This reverts commit 76af907676.
The behavioral change described in the migration guide
has now been made optional with new scrolled window API,
so no need to mention this in the migration guide.
This reverts commit 37e913d76b.
This is no longer needed since the natural size propagation of
scrolled window children is now an optional behavior. Reverting
this also makes the widget factory scrolled window sizes behave
the same as with the gtk+ 3.20 branch.
In gtkscrolledwindow.c, the return type of _get_propagate_natural_width()
and _get_propagate_natural_height() were accidentally gint instead of
gboolean, fixed to match the type correctly declared in the header file.
The code always assumed that getting a row at a certain 'y' was
possible but if the list box has more empty space than rows then a
valid row may not be retrieved.
https://bugzilla.gnome.org/show_bug.cgi?id=770703
- while we don't use steppers anymore, for some reason they are still
defined in the theme and if you sacrifice a chicken and jump on one
leg at full moon, you can enable them.
https://bugzilla.gnome.org/show_bug.cgi?id=769498
When a popup is mapped but will not be the top most popup (for example
the parent is not the current top most popup, or if there already is a
popup mapped but the parent is a toplevel), warn and ignore it instead
of continuing, as continuing would be a protocol violation.
https://bugzilla.gnome.org/show_bug.cgi?id=770745
Since we're using _get_rect_coords in size-allocate when allocating the
size of the child widget, use the newly introduced _get_rect_for_size to
calculate the difference between the passed size_for and the one we're
supposed to pass on to the child widget.
When calculating the requested size of a popover, we need to do the
exact same same thing _get_rect_coords did, but not for the
current popopver allocation. Add _get_rect_for_size that can be used for
this purpose
Making propagation of child natural sizes mandatory (or default, even) was
evidently a mistake as this causes dynamic content in a scrolled window
to resize it's parent when the scrolled window is competing for space
with an adjacent widget.
This patch instead adds API to control whether natural width and
height of the child should be propagated through the scrolled windows
size requests.
There was a return between a push/pop of an error trap, and
this managed to trigger the 'unpopped trap' warning in the
displayclose test now. Fix this.
Add an API that enables an application to, given an exported window
handle, set its own window as a transient of the window associated with
the exported window handle.
https://bugzilla.gnome.org/show_bug.cgi?id=769788
We were using __VOID for the SHOW_OTHER_LOCATION signal that
uses flags named SHOR_OTHER_LOCATION_WITH_FLAGS.
However, if a signal uses flags the marshal needs to use __FLAGS.
This patch addresses this using VOID__FLAGS as the marshaler parameter.
Thanks to Jan Steffens for pointing this out.
https://bugzilla.gnome.org/show_bug.cgi?id=770550
Only set input, opaque and window geometry regions once per commit.
They are double buffered anyway, so the last one would only take effect
either way; this way reading protocol logs are much more pleasent.
https://bugzilla.gnome.org/show_bug.cgi?id=769937
There is annoying interference between formatting the value
(for which we set the number of digits to show) and the small
frame-to-frame value changes that we do for autoscrolling.
To work around this, turn off the digits-based rounding entirely
and format the value ourselves with ::format-value.
And rename it to "Touch and Drawing Tablets", since it's no longer about
"axes" really.
As for pad support in the demo, just keep it "simple", make the
controller handle all pad devices, and make all the actions have the
same callback.
https://bugzilla.gnome.org/show_bug.cgi?id=770026
The wayland tablet protocol allows notifying the compositor with
descriptions of the actions performed by each tablet element. This
API call allows to hook up in to this wayland-specific feature.
https://bugzilla.gnome.org/show_bug.cgi?id=770026
These devices are kind of an strange case. Their "master" device is
the keyboard, because they share toplevel focus with it, regardless
of stylus focus. Nonetheless, they are only expected to send the
GdkEventPad* set of events.
https://bugzilla.gnome.org/show_bug.cgi?id=770026
This is a subclass of GdkWaylandDevice that implements GdkDevicePad,
all pad features are looked up from the info obtained through the
tablet v2 interface.
https://bugzilla.gnome.org/show_bug.cgi?id=770026
This GdkEventController is a helper object to handle pad events,
it allows setting a mapping to action names, to be triggered in
the given action group.
In order to help on places where advanced mapping/configurability
of pad features is not desirable, this controller also allows
passing a NULL pad device, meaning it will listen on all pads,
and/or passing -1 on mode/index, so an action applies to all
modes/features (eg. strips/rings).
https://bugzilla.gnome.org/show_bug.cgi?id=770026
This is an interface meant to be implemented by the "pad" devices.
This device-specific interface exposes the mapping of all pad features,
it allows retrieving:
- The number of buttons/rings/strips
- The number of groups
- The number of modes a group has
- Whether a given button/ring/strip belongs to a given group
https://bugzilla.gnome.org/show_bug.cgi?id=770026
We want the same treatment for those, the event will be emitted on the
toplevel, which will then decide what to do with the event.
It just doesn't make much sense to propagate those up/down the hierarchy,
when we want specifically one action being triggered from those.
https://bugzilla.gnome.org/show_bug.cgi?id=770026
GDK_PAD_BUTTON*,RING and STRIP will be emitted respectively when
pad buttons, rings or strips are interacted with. Each of those
pad components belong to a group (a pad can contain several of
those), which may be in a given mode. All this information is
contained in the event.
GDK_PAD_GROUP_MODE is emitted when a group in the pad switches
mode, which will generally result in a different set of actions
being triggered from the same buttons/rings/strips in the group.
https://bugzilla.gnome.org/show_bug.cgi?id=770026
An xdg-popup requires a serial that the compositor will compare against
its own serial and will dismiss the popup if it doesn't match.
gtk+ uses either a pointer or touch serial for its helper function
_gdk_wayland_seat_get_last_implicit_grab_serial() but if the menu is
triggered before the user has had any pointer or touch interaction with
the client, using a keyboard shortcut, there is neither pointer nor
touch serial available, and gtk+ will use 0 as the default.
As a result, the compositor will instantly dismiss the xdg-popup. In
this case, gtk+ should use the keyboard serial instead.
Track keyboard serial as well and use the keyboard serial as the value
if there is no newer pointer or touch serial available.
https://bugzilla.gnome.org/show_bug.cgi?id=768017
At the time of move_to_rect() is called, not all state may have been set
up on the impl gdk window, causing the position to sometimes be
slightly offset due to drap shadow margins. For now, work around this
by postponing the processing of the move_to_rect() parameters until
showing, when its more likely that all state (such as shadow margin)
has been set correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=769402
The Wayland backend manages a set of fake root coordinate spaces, where
each non-relative positioned toplevel (i.e. not popups, popovers,
tooltips etc) make up the basis of separate fake root coordinate spaces.
This means that the Wayland backend doesn't have the abilitiy get a
proper root coordinate when querying on a non-toplevel GdkWindow. To
avoid this issue, first find the toplevel, while translating the anchor
rect coordinates so that they are in the toplevel window coordinate
space. Then use this toplevel to translate the coordinates to root
window coordinate space.
https://bugzilla.gnome.org/show_bug.cgi?id=769402
The position of each transient-of will be in fake-root coordinate
space; thus we should not accumulate all the positions making it an
offset; each window is already in fake root coordinate space.
https://bugzilla.gnome.org/show_bug.cgi?id=769402
When using the set transient-for as a popup parent, fetch the effective
toplevel instead, otherwise we will position against the wrong
coordinate.
https://bugzilla.gnome.org/show_bug.cgi?id=769402
The effect of transitions-enabled=true can now be
achieved using gtk_popover_popup/popdown and the effect
of transitions-enabled=false can be achieved using
gtk_widget_show/hide.
https://bugzilla.gnome.org/show_bug.cgi?id=769706
Since not chaining up in gtk_widget_show/gtk_widget_hide is not allowed,
we can't just implicitly delay the hiding in GtkPopover's hide
implementation. Fix this by introducing gtk_popover_popup() and
gtk_popover_popdown() to show or hide a popover with transition and
revert GtkPopover's show/hide implementation to apply their effect
without the transition.
https://bugzilla.gnome.org/show_bug.cgi?id=769706
The order in which tooltips are created, drawn, shown and then positioned,
always requires repositioning the surface. The tooltip window type only has
limited capability to do so. An alternative could be to use bufferstreams.
https://bugzilla.gnome.org/show_bug.cgi?id=768138
When a dialog is created, the mir event source is already executed on the
call stack. So without the recurse flag it will not be run in the main loop
used for the dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=768138
The event will be sent when the surface becomes visible on an output. With this change the GdkMirWindowImpl keeps track of the scale value and sends a configure event on change.
Signed-off-by: Andreas Pokorny <andreas.pokorny@canonical.com>
The config.rpath script was added by running gettextize, but it's not
really needed, as config.rpath is generated by autotools and it's
included in the dist tarball automatically.
Upstream gettextize has been fixed so it does not happen any more:
http://savannah.gnu.org/bugs/index.php?48729
The GtkHeaderBar gadget implementation was subtly broken: it called
gtk_widget_set_allocation both in gtk_header_bar_size_allocate (with
the actual allocation) and in gtk_header_bar_allocate_contents (with
the content allocation of the main gadget). Dropping the second call
fixes the render node conversion for GtkHeaderBar.
The event code could potentially dereference pointer_info if the
invariant that ENTER_NOTIFY and LEAVE_NOTIFY events are only emitted on
devices which have pointers is violated elsewhere.
Found with scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=712760
In order to eliminate g_test_expect_message() (which doesn’t work with
G_LOG_USE_STRUCTURED), make the warning about the fallback theme not
existing be conditional on the icon theme search path containing a
system path. Any application code which modifies the search path does so
through appends and prepends, so this should not affect whether the
warning is emitted in production.
https://bugzilla.gnome.org/show_bug.cgi?id=769485
:toggled is triggered on :clicked, so using :toggled lead to the menu
to be popped up at the same time, while allowing to use the toggle state
and avoiding any need to a hack to prevent recursion, which somehow
wasn't enough for double emission of GtkMenuToolButton:show-popup.
https://bugzilla.gnome.org/show_bug.cgi?id=769287
Pick the W32 API for possible deadkey+<something> combinations
and prefer these to other sources of deadkey combos.
Specifically, if W32 API supports at least one combo for a particular
deadkey, only use that data and do not attempt to do other, unsupported
combinations, even if they make sense otherwise.
This is needed to, for example, correctly support US-International
keyboard layout, which produces a combined character for <' + a>
combo, but not for <' + s>, for example.
This is achieved by stashing all the deadkeys that we find in
an array, then doing extra loop through all virtual key codes and
trying to combine them with each of these deadkeys. Any combinations
that produce a single character are cached for later use.
In GTK Simple IM context, call a new GDK W32 function to do a lookup
on that cached combination table early on, among the "special cases"
(which are now partially obsolete).
A limitation of this code is that combinations with more than
one deadkey are not supported, except for combinations that consist
entirely of 2 known deadkeys. The upshot is that lookups should
be relatively fast, as deadkey array stays small and the combination
tree stays shallow.
Note that the use of ToUnicodeEx() seems suboptimal, as it should
be possible to just load a keyboard library (KBD*.DLL) manually
and obtain and use its key table directly. However, that is much more
complicated and would result in a significant rewrite of gdkkeys-win32.
The code from this commit, though hacky, is a direct addition to
existing code and should cover vast majority of the use-cases.
https://bugzilla.gnome.org/show_bug.cgi?id=569581
This changes the group/level semantic.
Previously W32 backend used "group 0/1" to denote "AltGr OFF/ON"
and "level 0/1" to denote "Shift is OFF/ON".
Now "group" means "keyboard layout" and there can be up to 255 groups,
while AltGr and Shift are combined into a single level enum that
takes values between 0 and 4.
Unlike X, W32 doesn't do effective group overriding, meaning that
it will never tell the caller that a different group was actually
used (even for universal keys, such as Enter), because key symbol
table is completely fabricated and there's no point in trying to
save a few of kilobytes of RAM by not duplicating universal key
records for all groups.
Also contains many whitespace changes (tab elimination, fixed
indentation) and cleanup (axed a few global variables, these are
now accessed via the default keymap).
https://bugzilla.gnome.org/show_bug.cgi?id=768722
GTK+ has two directories for translations: the default 'po' and the
additional 'po-properties' for the GObject properties translation
domain.
Since the content of the translations directories are filled by
autoreconf and gettext, and are duplicated between the two gettext
domains we use, we should handle this ad hoc inside git.mk, instead of
trying to catch up by adding po-properties files in GITIGNOREFILES.
The contents of the macro directory are too complicated for git.mk to
handle: the contents are filled by autotools and may change between
systems or autotools releases; and we additionally ship our own m4
macros.
To avoid unnecessary noise on the `git status` output we should simply
add an ignore file specifically for the macro directory.
The new positioning-related properties had some quality of
implementation issues, such as incorrect initial values and
excessive change notification. This broke the notify test.
It tried to set the expand state if either xexpand/yexpand where true.
Due to a missing queue_compute_expand when adding a child it actually
only computed the expand state in case a child queued after being added
or in case a child had the expand property set (see optimization in
gtk_widget_set_parent)
In my case this broke layouts as a child of GtkCombBox started setting
an exand flag with 3.20 which queued a compute_expand, which in turn
propagated an expand child props set for a cell in the same table up
and overrode the expand child prop of a parent GtkBox.
This removes the custom compute_expand implementation to match the
behaviour of GtkBox (don't propagate child prop expand flags
but let child expand flags override the child props) and not get random
expand behaviour depending on whether and when child widgets set their
expand state.
https://bugzilla.gnome.org/show_bug.cgi?id=769162
gtk+/demos/gtk-demo/css_blendmodes.c: In function ‘update_css_for_blend_mode’:
gtk+/demos/gtk-demo/css_blendmodes.c:49:26: error: format not a string literal, argument types not checked [-Werror=format-nonliteral]
blend_mode);
^~~~~~~~~~
https://bugzilla.gnome.org/show_bug.cgi?id=769236
The error was:
gtk3-scan.c:193: undefined reference to `gtk_shortcuts_label_get_type'
collect2: error: ld returned 1 exit status
It's since commit 7543cd8ce4, which made
the GtkShortcutLabel class public.
Introduce a private API meant for abstracting how to get a handle
of a window that can be shared with other processes. The API is
async, since some implementations will require that. Currently,
only X11 is supported, which doesn't.
Based on a patch by Jonas Adahl.
When there's no useful shortcut accelerator set,
GtkShortcutLabel doesn't show any useful information.
To work around that, add a new property to set the
text to be displayed when there's no accelerator
available.
https://bugzilla.gnome.org/show_bug.cgi?id=769205
GtkShortcutLabel is a widget that displays a single
shortcut accelerator or gesture in the user interface,
and is currently used by the shortcuts window.
This widget, however, has public value as other applications
also may want to expose their own shortcuts. For instance,
it'll be useful for the Keyboard panel on Control Center and
the new shortcut editor in Pitivi, among others.
This patch exposes GtkShortcutLabel as a public widget,
and adds the necessary documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=769205
Scroll history must refer to a timespan for the values to be valid, otherwise
we return FALSE, in this case the stored event(s) should be discarded anyway.
It could be the case that the last scroll event is received long after any
previous scroll event, in this case the last scroll event discards all "old"
scroll events, and scroll_history_finish() returns FALSE because there's no
time/offset deltas in the scroll history.
This is desired so we don't trigger the deceleration effect if there was no
effective velocity, we still must reset the installed scroll cursor, so take
it out of this if() condition.
I thought I needed ot rearrange the ordering of the animation-direction
values for the parser, overlooking the fact that we already parse them
backwards to address this very problem.
It is important to know whether the returned object can or cannot
change, for a certain widget. For example to connect to the
GtkStyleContext::changed signal.
https://bugzilla.gnome.org/show_bug.cgi?id=769047
Always return an error if we fail to get a dbus proxy; the callers
are only looking whether error is set, not whether the return value
is NULL.
Use the same function for the inhibit proxy as well, and clean up
the sm_proxy in finalize.
Only update to using v2 headers/structs. The incompatible changes
to tool events are dealt with in the next commit. Pads aren't handled
in this commit either.
for %%s in (16 22 24 32 48 256) do ((mkdir $(CopyDir)\share\icons\hicolor\%%sx%%s\apps) & (copy /b ..\..\..\demos\gtk-demo\data\%%sx%%s\gtk3-demo.png $(CopyDir)\share\icons\hicolor\%%sx%%s\apps))
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
