Released 1.2.10.

Sun Apr  1 23:01:31 2001  Owen Taylor  <otaylor@redhat.com>

	* Released 1.2.10.

Sun Apr  1 22:22:47 2001  Owen Taylor  <otaylor@redhat.com>

	[ Addition of safety checks to try to avoid segfaulting
	  on broken setups always. ]

	* gdk/gdkfont.c (_gdk_font_wc_to_glyphs): Add a boolean
	return value to deal with failure of conversion of
	wide characters to glyphs.

	* gtk/gtkentry.c gtk/gtklabel.c: Handle failure of
	mbstowcs/wcstombs a bit better.

	* gdk/gdkfont.c gdk/gdkdraw.c: Deal with failure of
	_gdk_font_wc_to_glyphs() gracefully

	* gdk/gdkim.c (_gdk_wcstombs_len): quietly return NULL on
	failure instead of g_return_if_fail().

Wed Mar 28 16:05:29 2001  Owen Taylor  <otaylor@redhat.com>

	* gtk/gtkfontsel.c (gtk_font_selection_select_size): Fix
	problem where fractional sizes caused infinite loop.
	(bugzilla.redhat.com #33081)

Wed Mar 28 14:52:08 2001  Owen Taylor  <otaylor@redhat.com>

	* docs/Makefile.am: Remove excess rules breaking
	distcheck.

.cvsignore

@@ -1,6 +1,7 @@
 *.lo
 config.log
 config.h
+config.h.in
 libtool
 config.status
 stamp-h
@@ -8,6 +9,11 @@ Makefile
 Makefile.in
 aclocal.m4
 configure
-gtk+.xconfig
+gtk-config
 config.cache
-
+ABOUT-NLS
+intl
+stamp-h.in
+gtk+.spec
+gdk.pc
+gtk+.pc

AUTHORS

@@ -1,3 +1,32 @@
-Peter Mattis    (petm@xcf.berkeley.edu)
-Spencer Kimball (spencer@xcf.berkeley.edu)
-Josh MacDonald  (jmacd@xcf.berkeley.edu)
+Original Authors
+----------------
+Peter Mattis      <petm@xcf.berkeley.edu>
+Spencer Kimball   <spencer@xcf.berkeley.edu>
+Josh MacDonald    <jmacd@xcf.berkeley.edu>
+
+Please do not mail the original authors asking questions about this 
+version of GTK+.
+
+The GTK+ Team (in alphabetical order)
+-------------------------------------
+Shawn T. Amundson <amundson@gtk.org>
+Jerome Bolliet    <bolliet@gtk.org>
+Damon Chaplin     <damon@gtk.org>
+Tony Gale         <gale@gtk.org>
+Jeff Garzik       <jgarzik@gtk.org>
+Lars Hamann       <lars@gtk.org>
+Raja R Harinath   <harinath@gtk.org>
+Carsten Haitzler  <raster@gtk.org>
+Tim Janik         <timj@gtk.org>
+Stefan Jeske      <stefan@gtk.org>
+Elliot Lee        <sopwith@gtk.org>
+Raph Levien       <raph@gtk.org>
+Ian Main          <imain@gtk.org>
+Federico Mena     <quartic@gtk.org>
+Paolo Molaro      <lupus@gtk.org>
+Jay Painter       <jpaint@gtk.org>
+Manish Singh      <manish@gtk.org>
+Owen Taylor       <otaylor@gtk.org>
+
+There are many others who have contributed patches; we thank them,
+GTK+ is much better because of them.

COPYING

@@ -2,7 +2,7 @@
 		       Version 2, June 1991
 
  Copyright (C) 1991 Free Software Foundation, Inc.
-                    675 Mass Ave, Cambridge, MA 02139, USA
+    		    59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -436,7 +436,7 @@ DAMAGES.
 
 		     END OF TERMS AND CONDITIONS
 
-     Appendix: How to Apply These Terms to Your New Libraries
+           How to Apply These Terms to Your New Libraries
 
   If you develop a new library, and you want it to be of the greatest
 possible use to the public, we recommend making it free software that
@@ -463,8 +463,9 @@ convey the exclusion of warranty; and each file should have at least the
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public
-    License along with this library; if not, write to the Free
-    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+    License along with this library; if not, write to the 
+    Free Software Foundation, Inc., 59 Temple Place - Suite 330, 
+    Boston, MA  02111-1307  USA.
 
 Also add information on how to contact you by electronic and paper mail.
 

HACKING

@@ -1,30 +1,35 @@
 If you want to hack on the Gtk+ project, it will make you life easier
 to have the following packages installed:
 
-	- GNU autoconf 2.12
-	- GNU automake 1.2d
-		Available in ftp://ftp.cygnus.com/pub/tromey
-	- GNU libtool 1.0h
-		Available in ftp://alpha.gnu.org/gnu/
+	- GNU autoconf 2.13
+	- GNU automake 1.4
+	        (Beta releases are at ftp://ftp.cygnus.com/pub/tromey)
+	- GNU libtool 1.2d
+	- indent (GNU indent 1.9.1 is known good)
+	- GNU gettext 10.35
+		Available in ftp://alpha.gnu.org/gnu
 
-These should be available by ftp from prep.ai.mit.edu or any of the
+These should be available by ftp from ftp.gnu.org or any of the
 fine GNU mirrors.  Beta software can be found at alpha.gnu.org.
 
-If you are accessing gtk+ via CVS, then you will need to take several
-steps to get it to compile.  You can do all these steps at once
-by running:
+In order to get CVS gtk+ installed on your system, you need to have
+the most recent CVS version of glib installed as well.
+The installation process of glib is similar to that of gtk+, but
+needs to be fulfilled prior to installation of gtk+.
+
+To compile a CVS version of gtk+ on your system, you will need to take
+several steps to setup the tree for compilation.  You can do all these
+steps at once by running:
 
         cvsroot/gtk+# ./autogen.sh
    
 Basically this does the following for you:
 
   	cvsroot/gtk+# aclocal; automake; autoconf
-        cvsroot/gtk+/glib# aclocal; automake; autoconf
 
         The above commands create the "configure" script.  Now you
 	can run the configure script in cvsroot/gtk+ to create all
-	the Makefiles.  You only need to call "configure" in cvsroot/gtk+ 
-	as the one in glib will be invoked automatically.
+	the Makefiles.
 
 Before running autogen.sh or configure, make sure you have libtool 
 in your path.  
@@ -34,17 +39,17 @@ options like --prefix=/usr to configure you can give those options
 to autogen.sh and they will be passed on to configure.
 
 If at all possible, please use CVS to get the latest development version of
-gtk+.  You can do the following to get gtk+ from cvs:
+gtk+ and glib.  You can do the following to get glib and gtk+ from cvs:
 
-   $ export CVSROOT=':pserver:anonymous@cvs.gimp.org:/debian/home/gnomecvs'
+   $ export CVSROOT=':pserver:anonymous@cvs.gnome.org:/cvs/gnome'
    $ cvs login
      (there is no password, just hit return)
-   $ cvs -z9 checkout gtk+
+   $ cvs -z3 checkout glib
+   $ cvs -z3 checkout gtk+
+
+For information about submitting patches and commiting changes
+to CVS, see the README and README.cvs-commits files. In particular, 
+don't, under any circumstances, commit anything to CVS before
+reading and understanding README.cvs-commmits.
 
-Please submit patches to the gtk-list@redhat.com mailing list (you must
-subscribe before you post, e-mail gtk-list-request@redhat.com with a
-subject of "subscribe"). All kinds of contributions are accepted.
-Patches that you wish to go into the distribution should also be uploaded 
-to ftp://ftp.gimp.org/incoming.  Follow the rules there for naming your
-patches. 
 

INSTALL

@@ -1,36 +1,218 @@
-The 'configure' script can be given a number of options to
-enable and disable various features. For a complete list,
-type:
+Prerequisites
+=============
+
+GTK+ requires the GLIB library, available at the same location as
+you got this package.
+
+Simple install procedure
+========================
+
+  % gzip -cd gtk+-1.2.10.tar.gz | tar xvf - # unpack the sources
+  % cd gtk+-1.2.10			   # change to the toplevel directory
+  % ./configure				   # run the `configure' script
+  % make				   # build GTK
+
+  [ Become root if necessary ]
+  % rm -rf /install-prefix/include/gtk /install-prefix/include/gdk
+  % make install			   # install GTK
+
+Special note for GTK+-1.2.9
+===========================
+
+Between GTK+-1.2.8 and GTK+-1.2.9, the include files for GTK+
+have been moved to $(includedir)/gtk-1-2/ to allow parallel installations
+of GTK+-1.2 and GTK+-2.0 to work correctly. If you are installing
+on top of an old installation of GTK+, you should remove the directories:
+
+ $(includedir)/gtk/
+ $(includedir)/gdk/
+
+Before running 'make install'
+
+The Nitty-Gritty
+================
+
+The 'configure' script can be given a number of options to enable
+and disable various features. For a complete list, type:
+
   ./configure --help
 
+A few of the more important ones:
+
+*  --prefix=PREFIX         install architecture-independent files in PREFIX
+                           [ Defaults to /usr/local ]
+
+*  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                           [ Defaults to the value given to --prefix ]
+
+*  --with-xinput=[no/gxi/xfree] support XInput [default=no]
+
+The --with-xinput flag specifies whether to compile with support
+for the XInput extension (mainly used for graphics tablets), and
+which form of support to use:
+
+  no    : no support 
+  xfree : Use special features in the Wacom drivers in XFree86 3.3.1
+          and later.
+  gxi   : Use generic XInput support (not recommended)
+
+The XInput support is not known to work with any other XServer than
+XFree86. For more information about XInput, see:
+
+ http://www.gtk.org/~otaylor/xinput/howto/index.html
+ http://www.lepied.com/xfree86/
+
+*  --disable-nls           do not use Native Language Support
+
+If this flag is not specified, GTK+ will try to find
+and use the gettext() set of functions to provide translations
+of the strings in the standard dialogs into the
+user's native language.
+
 *  --enable-xim            support XIM [default=yes]
 
 Specifying --disable-xim will disable support for entering
-internationalized text using X Input Methods. This will give
-some slight savings in speed and memory use and might be necessary
+internationalized text using X Input Methods. This will give some
+slight savings in speed and memory use and might be necessary
 with older versions of X.
 
-* --with-locale=LOCALE    locale name you want to use
+*  --with-locale=LOCALE    locale name you want to use
 
 The --with-locale options is used to determine if your operating
-system has support for the locale you will be using. If not, X's built
-in locale support will be used.
+system has support for the locale you will be using. If not, X's
+built in locale support will be used.
 
-Because of bugs in autoconf, it is necessary to specify this option
-even if your LANG environment variable is correctly set.
+Because of bugs in autoconf, it is necessary to specify this
+option even if your LANG environment variable is correctly set.
 
 This option does not determine which locale GTK will use at
-runtime. That will be determined from the usual environment variables.
-If you will be using multiple locales with GTK, specify the one
-for which your operating system has the worst support for the 
---with-locale option.
+runtime. That will be determined from the usual environment
+variables.  If you will be using multiple locales with GTK,
+specify the one for which your operating system has the worst
+support for the --with-locale option.
+
+*  --with-native-locale=[yes/no]  Use native locale support
+
+If set, GTK+ will use your C library's native locale support,
+instead of making conversions between wide characters and
+multibyte-strings by going through Xlib's property-conversion
+functions. Specifying this flag can speed up some operations
+involving text by between 5 and 20 times.
+
+This defaults to no, because it has not extensively been
+tested for portability, but should be safe on most modern
+systems.
 
 
-Note for using XIM support with kinput2
----------------------------------------
+Options can be given to the compiler and linker by setting
+environment variables before running configure. A few of the more
+important ones:
 
-There is a bug in older versions of kinput2 that will cause 
-GTK to hang when destroying a text entry. The latest versions
-of kinput is available from:
+ CC       : The C compiler to use
+ CPPFLAGS : Flags for the C preprocesser such as -I and -D
+ CFLAGS   : C compiler flags
+
+The most important use of this is to set the
+optimization/debugging flags. For instance, to compile with no
+debugging information at all, run configure as:
+
+ CFLAGS=-O2 ./configure           # Bourne compatible shells (sh/bash/zsh)
+
+or,
+
+ setenv CFLAGS -O2 ; ./configure  # csh and variants
+
+Native-Language Support and gettext()
+=====================================
+
+To provide native-language support (NLS) GTK+ uses the
+gettext() set of functions. These functions are found
+in the C library on many systems, such as the Solaris
+C library and the GNU C Library, version 2.
+
+If your C library does not provide the necessary functionality,
+you may wish to install the GNU gettext package. You'll
+need version 0.10.35 or better. Version 0.10.35 is
+available from ftp://alpha.gnu.org/pub/gnu
+
+Generally, GTK+ will properly detect what is installed
+on your system and enable or disable NLS as appropriate.
+However, in rare cases, it may be necessary to disable
+NLS manually to get GTK+ to compile. You can do this
+by specifying the --disable-nls flag when configuring
+GTK+.
+
+Using an uninstalled copy of GLIB [ Unsupported ]
+=================================================
+
+You can compile GTK+ against a copy of GLIB that you have not
+yet installed. To do this, give the --with-glib=DIR options
+to ./configure. For instance:
+
+ ./configure --with-glib=../glib-1.2.10
+
+This, however, will not work if you built GLIB with different
+source and build directories.
+
+It is recommended that you install GLIB before compiling
+GTK+. The --with-glib option is not regularly tested
+and may not function correctly. In addition, 
+inter-library dependencies won't be generated when
+using --with-glib=.
+
+Installation directories
+========================
+
+The location of the installed files is determined by the --prefix
+and --exec-prefix options given to configure. There are also more
+detailed flags to control individual directories. However, the
+use of these flags is not tested.
+
+One particular detail to note, is that the architecture-dependent
+include file glibconfig.h is installed in:
+
+  $exec_pref/lib/glib/include/
+
+if you have a version in $prefix/include, this is out of date
+and should be deleted.
+
+A shell script gtk-config is created during the configure
+process, and installed in the bin/ directory
+($exec_prefix/bin). This is used to determine the location of GTK
+when building applications.  If you move GTK after installation,
+it will be necessary to edit this file.
+
+For complete details, see the file docs/gtk-config.txt
+
+
+Notes for using XIM support for Japanese input
+==============================================
+
+* There is a bug in older versions of kinput2 that will cause GTK+
+to hang when destroying a text entry. The latest versions of
+kinput is available from:
 
   ftp://ftp.sra.co.jp/pub/x11/kinput2
+
+* The locale information file for the ja_JP EUC locale
+distributed with some recent versions of X11 specifies to use the
+C library multibyte functions. Unless your C library has support
+for Japanese locales, this is incorrect, and will cause problems
+for GTK's internationalization.
+
+(In particular, this occurs with GNU libc 2.0 in which
+the multibyte functions always translate to and from UTF-8; but
+the problem may occur for other C libraries, and other operating
+systems as well.)
+
+To fix this, change the line:
+
+use_stdc_env		True
+
+to 
+
+use_stdc_env		False
+
+in the file /usr/X11R6/lib/X11/locale/ja_JP/XLC_LOCALE.
+
+

INSTALL.in

@@ -0,0 +1,218 @@
+Prerequisites
+=============
+
+GTK+ requires the GLIB library, available at the same location as
+you got this package.
+
+Simple install procedure
+========================
+
+  % gzip -cd gtk+-@GTK_VERSION@.tar.gz | tar xvf - # unpack the sources
+  % cd gtk+-@GTK_VERSION@			   # change to the toplevel directory
+  % ./configure				   # run the `configure' script
+  % make				   # build GTK
+
+  [ Become root if necessary ]
+  % rm -rf /install-prefix/include/gtk /install-prefix/include/gdk
+  % make install			   # install GTK
+
+Special note for GTK+-1.2.9
+===========================
+
+Between GTK+-1.2.8 and GTK+-1.2.9, the include files for GTK+
+have been moved to $(includedir)/gtk-1-2/ to allow parallel installations
+of GTK+-1.2 and GTK+-2.0 to work correctly. If you are installing
+on top of an old installation of GTK+, you should remove the directories:
+
+ $(includedir)/gtk/
+ $(includedir)/gdk/
+
+Before running 'make install'
+
+The Nitty-Gritty
+================
+
+The 'configure' script can be given a number of options to enable
+and disable various features. For a complete list, type:
+
+  ./configure --help
+
+A few of the more important ones:
+
+*  --prefix=PREFIX         install architecture-independent files in PREFIX
+                           [ Defaults to /usr/local ]
+
+*  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                           [ Defaults to the value given to --prefix ]
+
+*  --with-xinput=[no/gxi/xfree] support XInput [default=no]
+
+The --with-xinput flag specifies whether to compile with support
+for the XInput extension (mainly used for graphics tablets), and
+which form of support to use:
+
+  no    : no support 
+  xfree : Use special features in the Wacom drivers in XFree86 3.3.1
+          and later.
+  gxi   : Use generic XInput support (not recommended)
+
+The XInput support is not known to work with any other XServer than
+XFree86. For more information about XInput, see:
+
+ http://www.gtk.org/~otaylor/xinput/howto/index.html
+ http://www.lepied.com/xfree86/
+
+*  --disable-nls           do not use Native Language Support
+
+If this flag is not specified, GTK+ will try to find
+and use the gettext() set of functions to provide translations
+of the strings in the standard dialogs into the
+user's native language.
+
+*  --enable-xim            support XIM [default=yes]
+
+Specifying --disable-xim will disable support for entering
+internationalized text using X Input Methods. This will give some
+slight savings in speed and memory use and might be necessary
+with older versions of X.
+
+*  --with-locale=LOCALE    locale name you want to use
+
+The --with-locale options is used to determine if your operating
+system has support for the locale you will be using. If not, X's
+built in locale support will be used.
+
+Because of bugs in autoconf, it is necessary to specify this
+option even if your LANG environment variable is correctly set.
+
+This option does not determine which locale GTK will use at
+runtime. That will be determined from the usual environment
+variables.  If you will be using multiple locales with GTK,
+specify the one for which your operating system has the worst
+support for the --with-locale option.
+
+*  --with-native-locale=[yes/no]  Use native locale support
+
+If set, GTK+ will use your C library's native locale support,
+instead of making conversions between wide characters and
+multibyte-strings by going through Xlib's property-conversion
+functions. Specifying this flag can speed up some operations
+involving text by between 5 and 20 times.
+
+This defaults to no, because it has not extensively been
+tested for portability, but should be safe on most modern
+systems.
+
+
+Options can be given to the compiler and linker by setting
+environment variables before running configure. A few of the more
+important ones:
+
+ CC       : The C compiler to use
+ CPPFLAGS : Flags for the C preprocesser such as -I and -D
+ CFLAGS   : C compiler flags
+
+The most important use of this is to set the
+optimization/debugging flags. For instance, to compile with no
+debugging information at all, run configure as:
+
+ CFLAGS=-O2 ./configure           # Bourne compatible shells (sh/bash/zsh)
+
+or,
+
+ setenv CFLAGS -O2 ; ./configure  # csh and variants
+
+Native-Language Support and gettext()
+=====================================
+
+To provide native-language support (NLS) GTK+ uses the
+gettext() set of functions. These functions are found
+in the C library on many systems, such as the Solaris
+C library and the GNU C Library, version 2.
+
+If your C library does not provide the necessary functionality,
+you may wish to install the GNU gettext package. You'll
+need version 0.10.35 or better. Version 0.10.35 is
+available from ftp://alpha.gnu.org/pub/gnu
+
+Generally, GTK+ will properly detect what is installed
+on your system and enable or disable NLS as appropriate.
+However, in rare cases, it may be necessary to disable
+NLS manually to get GTK+ to compile. You can do this
+by specifying the --disable-nls flag when configuring
+GTK+.
+
+Using an uninstalled copy of GLIB [ Unsupported ]
+=================================================
+
+You can compile GTK+ against a copy of GLIB that you have not
+yet installed. To do this, give the --with-glib=DIR options
+to ./configure. For instance:
+
+ ./configure --with-glib=../glib-@GTK_VERSION@
+
+This, however, will not work if you built GLIB with different
+source and build directories.
+
+It is recommended that you install GLIB before compiling
+GTK+. The --with-glib option is not regularly tested
+and may not function correctly. In addition, 
+inter-library dependencies won't be generated when
+using --with-glib=.
+
+Installation directories
+========================
+
+The location of the installed files is determined by the --prefix
+and --exec-prefix options given to configure. There are also more
+detailed flags to control individual directories. However, the
+use of these flags is not tested.
+
+One particular detail to note, is that the architecture-dependent
+include file glibconfig.h is installed in:
+
+  $exec_pref/lib/glib/include/
+
+if you have a version in $prefix/include, this is out of date
+and should be deleted.
+
+A shell script gtk-config is created during the configure
+process, and installed in the bin/ directory
+($exec_prefix/bin). This is used to determine the location of GTK
+when building applications.  If you move GTK after installation,
+it will be necessary to edit this file.
+
+For complete details, see the file docs/gtk-config.txt
+
+
+Notes for using XIM support for Japanese input
+==============================================
+
+* There is a bug in older versions of kinput2 that will cause GTK+
+to hang when destroying a text entry. The latest versions of
+kinput is available from:
+
+  ftp://ftp.sra.co.jp/pub/x11/kinput2
+
+* The locale information file for the ja_JP EUC locale
+distributed with some recent versions of X11 specifies to use the
+C library multibyte functions. Unless your C library has support
+for Japanese locales, this is incorrect, and will cause problems
+for GTK's internationalization.
+
+(In particular, this occurs with GNU libc 2.0 in which
+the multibyte functions always translate to and from UTF-8; but
+the problem may occur for other C libraries, and other operating
+systems as well.)
+
+To fix this, change the line:
+
+use_stdc_env		True
+
+to 
+
+use_stdc_env		False
+
+in the file /usr/X11R6/lib/X11/locale/ja_JP/XLC_LOCALE.
+
+

MAINTAINERS

@@ -0,0 +1 @@
+Email: gtk-bugs@gimp.org

Makefile.am

@@ -1,14 +1,122 @@
-## Process this file with automake to produce Makefile.in
+## Makefile.am for GTK+
 
-SRC_SUBDIRS = glib gdk gtk
-SUBDIRS = $(SRC_SUBDIRS) docs
+SRC_SUBDIRS = gdk gtk
+SUBDIRS = po $(SRC_SUBDIRS) docs
+
+bin_SCRIPTS = gtk-config
+
+# require automake 1.4
+AUTOMAKE_OPTIONS = 1.4
 
 EXTRA_DIST =	\
-	gtk+.prj	\
+	HACKING		\
+	gtk+.spec.in	\
+        gtk.m4          \
 	makecopyright	\
-	TODO
+	TODO		\
+	NEWS.pre-1-0	\
+	ChangeLog.pre-1-0	\
+	README.cvs-commits	\
+	intl/libgettext.h	\
+	intl/po2tbl.sed.in	\
+	examples/aspectframe/Makefile  \
+	examples/aspectframe/aspectframe.c  \
+	examples/Makefile  \
+	examples/README.1ST  \
+	examples/extract.awk  \
+	examples/extract.sh  \
+	examples/base/Makefile  \
+	examples/base/base.c  \
+	examples/buttons/Makefile  \
+	examples/buttons/buttons.c  \
+	examples/buttons/info.xpm  \
+	examples/calendar/Makefile  \
+	examples/calendar/calendar.c  \
+	examples/clist/Makefile  \
+	examples/clist/clist.c  \
+	examples/entry/Makefile  \
+	examples/entry/entry.c  \
+	examples/eventbox/Makefile  \
+	examples/eventbox/eventbox.c  \
+	examples/filesel/Makefile  \
+	examples/filesel/filesel.c  \
+	examples/gtkdial/Makefile  \
+	examples/gtkdial/dial_test.c  \
+	examples/gtkdial/gtkdial.c  \
+	examples/gtkdial/gtkdial.h  \
+	examples/helloworld/Makefile  \
+	examples/helloworld/helloworld.c  \
+	examples/helloworld2/Makefile  \
+	examples/helloworld2/helloworld2.c  \
+	examples/list/Makefile  \
+	examples/list/list.c  \
+	examples/menu/Makefile  \
+	examples/menu/menu.c  \
+	examples/menu/itemfactory.c  \
+	examples/notebook/Makefile  \
+	examples/notebook/notebook.c  \
+	examples/packbox/Makefile  \
+	examples/packbox/packbox.c  \
+	examples/packer/Makefile  \
+	examples/packer/pack.c  \
+	examples/paned/Makefile  \
+	examples/paned/paned.c  \
+	examples/pixmap/Makefile  \
+	examples/pixmap/pixmap.c  \
+	examples/progressbar/Makefile  \
+	examples/progressbar/progressbar.c  \
+	examples/radiobuttons/Makefile  \
+	examples/radiobuttons/radiobuttons.c  \
+	examples/rangewidgets/Makefile  \
+	examples/rangewidgets/rangewidgets.c  \
+	examples/rulers/Makefile  \
+	examples/rulers/rulers.c  \
+	examples/scribble-simple/Makefile  \
+	examples/scribble-simple/scribble-simple.c  \
+	examples/scrolledwin/Makefile  \
+	examples/scrolledwin/scrolledwin.c  \
+	examples/selection/Makefile  \
+	examples/selection/gettargets.c  \
+	examples/selection/setselection.c  \
+	examples/statusbar/Makefile  \
+	examples/statusbar/statusbar.c  \
+	examples/table/Makefile  \
+	examples/table/table.c  \
+	examples/text/Makefile  \
+	examples/text/text.c  \
+	examples/tictactoe/Makefile  \
+	examples/tictactoe/tictactoe.c  \
+	examples/tictactoe/tictactoe.h  \
+	examples/tictactoe/ttt_test.c  \
+	examples/tree/Makefile  \
+	examples/tree/tree.c  \
+	examples/wheelbarrow/Makefile  \
+	examples/wheelbarrow/wheelbarrow.c  \
+	examples/fixed/fixed.c  \
+	examples/fixed/Makefile  \
+	examples/frame/frame.c  \
+	examples/frame/Makefile  \
+	examples/spinbutton/spinbutton.c  \
+	examples/spinbutton/Makefile  \
+	examples/find-examples.sh \
+	gdk.pc.in gtk+.pc.in
 
-.PHONY: files populate checkin release
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA= gdk.pc gtk+.pc
+
+dist-hook: gtk+.spec
+	if test -e $(srcdir)/INSTALL.in && test -e $(srcdir)/README.in ; then \
+	     CONFIG_FILES="INSTALL:$(srcdir)/INSTALL.in README:$(srcdir)/README.in" \
+	     CONFIG_HEADERS= \
+	     $(SHELL) config.status \
+	     && cp INSTALL README $(distdir) ; \
+	fi \
+	&& cp gtk+.spec $(distdir)
+
+m4datadir = $(datadir)/aclocal
+m4data_DATA = gtk.m4
+
+.PHONY: files release sanity snapshot
 
 files:
 	@files=`ls $(DISTFILES) 2> /dev/null `; for p in $$files; do \
@@ -21,13 +129,13 @@ files:
 	  done; \
 	done
 
-populate:
-	@echo "populating project"
-	@files=`$(MAKE) files | grep -v "make\[[1-9]\]"`; prcs populate -d gtk+.prj $$files
-
-checkin: populate
-	@echo "checking in project"
-	@prcs checkin
-
 release:
+	rm -rf .deps */.deps
+	$(MAKE) distcheck
+
+sanity:
+	./sanity_check $(VERSION)
+
+
+snapshot:
 	$(MAKE) dist distdir=$(PACKAGE)`date +"%y%m%d"`

Makefile.in

@@ -1,353 +0,0 @@
-# Makefile.in generated automatically by automake 1.2c from Makefile.am
-
-# Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = /bin/sh
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = true
-PRE_INSTALL = true
-POST_INSTALL = true
-NORMAL_UNINSTALL = true
-PRE_UNINSTALL = true
-POST_UNINSTALL = true
-host_alias = @host_alias@
-host_triplet = @host@
-CC = @CC@
-CPP = @CPP@
-LD = @LD@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NM = @NM@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-x_cflags = @x_cflags@
-x_includes = @x_includes@
-x_ldflags = @x_ldflags@
-x_libs = @x_libs@
-xinput_progs = @xinput_progs@
-
-SRC_SUBDIRS = glib gdk gtk
-SUBDIRS = $(SRC_SUBDIRS) docs
-
-EXTRA_DIST = gtk+.prj makecopyright TODO REFCOUNTING BUGS
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =  gtk+.xconfig
-DIST_COMMON =  README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
-Makefile.in NEWS TODO acconfig.h aclocal.m4 config.guess config.h.in \
-config.sub configure configure.in gtk+.xconfig.in install-sh ltconfig \
-ltmain.sh missing mkinstalldirs stamp-h.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP = --best
-default: all
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINT@ configure.in 
-	cd $(srcdir) && $(ACLOCAL)
-
-config.status: $(srcdir)/configure
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINT@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-config.h: stamp-h
-	@:
-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
-	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h
-$(srcdir)/config.h.in: @MAINT@$(srcdir)/stamp-h.in
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
-	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in
-
-mostlyclean-hdr:
-
-clean-hdr:
-
-distclean-hdr:
-	-rm -f config.h
-
-maintainer-clean-hdr:
-gtk+.xconfig: $(top_builddir)/config.status gtk+.xconfig.in
-	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive  \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	for subdir in $(SUBDIRS); do \
-	  target=`echo $@ | sed s/-recursive//`; \
-	  echo "Making $$target in $$subdir"; \
-	  (cd $$subdir && $(MAKE) $$target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	rev=''; for subdir in $(SUBDIRS); do rev="$$subdir $$rev"; done; \
-	for subdir in $$rev; do \
-	  target=`echo $@ | sed s/-recursive//`; \
-	  echo "Making $$target in $$subdir"; \
-	  (cd $$subdir && $(MAKE) $$target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  (cd $$subdir && $(MAKE) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES)
-	here=`pwd` && cd $(srcdir) && mkid -f$$here/ID $(SOURCES) $(HEADERS)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-	done; \
-	test -z "$(ETAGS_ARGS)config.h.in$(SOURCES)$(HEADERS)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $(SOURCES) $(HEADERS) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) \
-	  && $(MAKE) dvi \
-	  && $(MAKE) check \
-	  && $(MAKE) install \
-	  && $(MAKE) installcheck \
-	  && $(MAKE) dist
-	-rm -rf $(distdir)
-	@echo "========================"; \
-	echo "$(distdir).tar.gz is ready for distribution"; \
-	echo "========================"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
-	  test -f $(distdir)/$$file \
-	  || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	  || cp -p $$d/$$file $(distdir)/$$file; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  test -d $(distdir)/$$subdir \
-	  || mkdir $(distdir)/$$subdir \
-	  || exit 1; \
-	  chmod 777 $(distdir)/$$subdir; \
-	  (cd $$subdir && $(MAKE) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	    || exit 1; \
-	done
-info: info-recursive
-dvi: dvi-recursive
-check: all-am
-	$(MAKE) check-recursive
-installcheck: installcheck-recursive
-all-recursive-am: config.h
-	$(MAKE) all-recursive
-
-all-am: Makefile config.h
-
-install-exec: install-exec-recursive
-	@$(NORMAL_INSTALL)
-
-install-data: install-data-recursive
-	@$(NORMAL_INSTALL)
-
-install: install-recursive
-	@:
-
-uninstall: uninstall-recursive
-
-all: all-recursive-am all-am
-
-install-strip:
-	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
-installdirs: installdirs-recursive
-
-
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(DISTCLEANFILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
-
-clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
-
-distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
-
-maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-
-mostlyclean:  mostlyclean-recursive mostlyclean-am
-
-clean:  clean-recursive clean-am
-
-distclean:  distclean-recursive distclean-am
-	-rm -f config.status
-	-rm -f libtool
-
-maintainer-clean:  maintainer-clean-recursive maintainer-clean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	-rm -f config.status
-
-.PHONY: default mostlyclean-hdr distclean-hdr clean-hdr \
-maintainer-clean-hdr install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info dvi \
-installcheck all-recursive-am all-am install-exec install-data install \
-uninstall all installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-
-.PHONY: files populate checkin release
-
-files:
-	@files=`ls $(DISTFILES) 2> /dev/null `; for p in $$files; do \
-	  echo $$p; \
-	done
-	@for subdir in $(SUBDIRS); do \
-	  files=`cd $$subdir; $(MAKE) files | grep -v "make\[[1-9]\]"`; \
-	  for file in $$files; do \
-	    echo $$subdir/$$file; \
-	  done; \
-	done
-
-populate:
-	@echo "populating project"
-	@files=`$(MAKE) files | grep -v "make\[[1-9]\]"`; prcs populate -d gtk+.prj $$files
-
-checkin: populate
-	@echo "checking in project"
-	@prcs checkin
-
-release:
-	$(MAKE) dist distdir=$(PACKAGE)`date +"%y%m%d"`
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

NEWS

@@ -1,77 +1,463 @@
-Overview of Fixes in GTK+ 0.99.5:
+Overview of Changes in GTK+ 1.2.10:
 
-* Signal signedness and naming corrections
-* rc/style fixes
-* text, entry widget fixes
-* gtkeditable fixes
-* scrollbar flickering fixed
-* check casts are more descriptive
-* DND fixes
-* FAQ updates
+* Fix focus drawing with no window manager
+* Fix cut-and-paste with no current event
+* Fix compilation using --with-xinput=gxi  
+* Fix problem with cut-and-paste and KOI8-R
+* Fix rare problem with enter events and menus
+* Fix problem with --with-native-locale and GNU libc-2.1
+* Further fixes for using fonts, not fontsets, with non iso-8859-1.
+* Fix problem with dropping onto internal children, such as CList buttons 
+* Translation updates
+
+Overview of Changes in GTK+ 1.2.9:
+
+* Move include files into a gtk-1-2/ subdir to support parallel
+  installation with GTK+-2.0. If you are installing from source
+  on top of a previous version, you should to remove $(includedir)/gdk/
+  and $(includedir)/gtk/ manually before installing the new version.
+* Improved submenu navigation.
+* Other small useability improvements for menus, scrollbars, etc.
+* Patch enabling themes with better appearance by making some 
+  geometry parameters settable.
+* Changes so that using fonts (as well as fontsets) for 
+  non-iso-8859-1 locales will work.
+* New --with-native-locale configure option for faster string
+  handling on systems with non-broken locale support.
+* Refuse to initialize GTK+ when setuid (http://www.gtk.org/setuid.html)
+* Change to make GdkRGB use less SHM segments.
+* Addition of .pc files
+* Many bug fixes 
+  (#50834, #50892, #13447, #50857, #1923, #50934, #3123, #51163,
+   #50492, #51026, #1704, #51039, #2682, #50964, #50926, #50686, 
+   #50678, #50511, #8170, #567, #424, #1290, #4524, #8041, #8002,
+   #7302, #11008, #34218, #12074, #12072, #9656, #10316, #14082, 
+   #13941, #13432, #7841, #6739, #8079, #28842, #50290, #50337, 
+   #6510, #15282, #11887, #18648, #26545, and others)
+
+Overview of Changes in GTK+ 1.2.8:
+
+* GNU Make 3.79 bug workaround
+* FAQ and tutorial updates and improvements
+* Miscellaneous bug fixes: CList, Calendar, rc-files, FontSelection
+
+Overview of Changes in GTK+ 1.2.7:
+
+* More header cleanups.
+* Fixed activation bug for insensitive widgets.
+* Locale fixes to RC file parsing code.
+* Miscellaneous bugfixes for Item Factory, CList, CTree, X Selections,
+  HScale, VScale, Pixmap, Viewport, OptionMenu, Entry and Notebook.
+* Upgrade to libtool 1.3.4.
+
+Overview of Changes in GTK+ 1.2.6:
+
+* container queue_resize fixes
+* gtk[vh]scale: minor fixups
+* rename idle to idle_id in testgtk to avoid conflicts with 
+  broken libs
+* More consistant naming of gtkrc files
+* Added language support: ro, uk
+
+Overview of Changes in GTK+ 1.2.5:
+
+* more GtkCTree and GtkWindow bug fixes.
+* more redraw/resize queue fixes, better expose event
+  discarding code.
+* more miscellaneous bugs fixed
+* new configure.in option --disable-rebuilds to completely disable
+  rebuilds of autogenerated sources.
+* check for 5.002 now, to avoid failing autogeneration build rules due
+  to old perl versions.
+* fonts (and fontsets) are cached now.
+* more autogeneration make rules and dependancy fixups, we should be
+  save with autogeneration up to make -j12 now ;)
+* new window position GTK_WIN_POS_CENTER_ALWAYS, which will recenter the
+  GtkWindow on every size change.
+* major rework of window manager hints handling code, fixed a bunch of
+  races with the new resizing code.
+* the new wm hints and resizing code is absolutely perfect and bug free now,
+  it only lacks testing ;)
+* fixed up various rc style memory prolems.
+* gtk_widget_modify_style() now properly changes the style of realized widgets
+  and references the style passed into it. if people worked around this bug,
+  this will introduce a slight memory leak in their code.
+  The code should typically look like:
+            GtkRcStyle *rc_style = gtk_rc_style_new ();
+            [...]
+            gtk_widget_modify_style (widget, rc_style);
+            gtk_rc_style_unref (rc_style);
+* fix problems with positioning menus offscreen.
+* GtkText fixes for some crashes and drawing errors.
+* Better handling for unexpected window destroys in GDK and GTK+.
+  This should make it possible to use a GtkPlug and catch the
+  case where its parent socket is randomly killed.
+* FAQ updates.
+* FileSelection i18n patches, RadioButton fixups.
+* many translation improvements.
+* miscellaneous other bugs fixed.
+
+Overview of Changes in GTK+ 1.2.4:
+
+* DnD improvements (drags can be canceled with Esc now).
+* suppressed configure event reordering in Gdk.
+* rewrite of Gtk's configure event handling.
+* major improvements for the object argument system (Elena Devdariani).
+* major bugfixes for threading, GtkNotebook, GtkItemFactory, GtkCList and
+  GtkCTree.
+* tutorial/FAQ updates, new file generation.txt on autogenerated sources.
+* configure's --with-glib= is "officially" unsupported.
+* upgrade to libtool 1.3.3.
+* various buglets fixed.
+
+Overview of Changes in GTK+ 1.2.3:
+
+* Upgrade to libtool 1.3
+* Check for dgettext (for systems with old versions of GNU Gettext)
+* Many bug fixes (see ChangeLog for details)
+
+Overview of Changes in GTK+ 1.2.2:
+
+* Improved Dnd behaviour with Motif applications.
+* Bug fixes for the Gtk selection code.
+* Minor bug fixes to the Gdk Atom cache and Dnd code (with --display option).
+* Bug fixes and leak plugs for the Gdk IM code.
+* Added gtk_object_get() facility to retrive object arguments easily.
+  The var args list expects ("arg-name", &value) pairs.
+* Fixed mapping for GdkInputCondition<->GIOCondition, this should fix
+  problems where closed pipes were no longer signalling GDK_INPUT_READ on
+  systems with a native poll().
+* Some cleanups to GtkLabel's memory allocation code (shouldn't leak memory
+  anymore).
+* We don't attempt to lookup xpm color "None" anymore, this should prevent
+  eXodus (commercial X windows server) from popping up a color dialog every
+  time a transparent pixmap is created.
+* Fixed bug where Gtk timout/idle handlers would execute without the global
+  Gdk lock being held.
+* Other minor bug fixes.
+
+Overview of Changes in GTK+ 1.2.1:
+
+* Many Bug fixes have been applied to the menu and accelerator code.
+* GtkItemFactory can "adopt" foreign menu items now and manage their
+  accelerator installation. This is often required to get GtkItemFactory
+  like accelerator propagation between different windows with the same
+  menu heirarchy and for centralized parsing and saving of accelerators.
+* GtkCList/GtkCTree buttons should always display correctly now.
+* Miscellaneous other bug fixes.
+
+What's New in GTK+ 1.2.0 (since 1.0.x):
+
+* New widgets: GtkFontSelector, GtkPacker, GtkItemFactory, GtkCTree,
+  GtkInvisible, GtkCalendar, GtkLayout, GtkPlug, GtkSocket
+* Many new features and robustness for existing widgets
+* Theme support
+* New DND implementation
+* Internationalization of standard dialogs
+* New key binding system
+* Tearoff menus and menu accelerators
+* Wide character support for entry and text
+* Resizing code has been overhauled
+* Queued redraws of partial areas
+* Far better support for object arguments
+* Speed optimizations
+* Runtime loading of dynamic modules
+* Support for GLib log domains
+* Tutorial improvements
+* A bug fix or two
+
+Overview of Changes in GTK+ 1.1.16:
+
+* Major fixes and improvements for handlebox
+* A change to the way widget->requisition works. Now,
+  widget->requisition is always what the widget requested,
+  unmodified by the usize. See Changes-1.2.txt for details.
+  This correct various bugs with gtk_widget_set_usize().
+* Fixes for XIM on X11R5 systems
+* Don't allow cut-and-paste of text in password-style entries
+* --enable-debug is now on by default for the development releaes.
+  (When compiling for "production", use --enable-debug=minimum)
+* Handle systems where Helvetica is not present more gracefully
+* Fixes for memory leaks
+* CList and CTree fixes
+* Bug fixes for drawing problems. 
+* Miscellaneous bug fixes to GtkLabel, GtkCList, GtkCTree,
+  GtkColorsel, Focusing, DND
+* Tutorial improvements
+
+Overview of Changes in GTK+ 1.1.15:
+
+* Tutorial Updates
+* Added --libs gthread to gtk-config 
 * Bug fixes
 
-Overview of Changes in GTK+ 0.99.4:
+What is new in GTK+ 1.1.14:
 
-* Reference counting revolution integrated.
-  Refer to docs/refcounting.txt on this issue.
-* Implementation of a decent debugging system, you would want
-  to export GTK_DEBUG=objects if you are going to develop gtk applications,
-  refer to docs/debugging.txt for further information.
-* Additions on the signal code for querying information about certain signals,
-  and pending handlers of signals.
-* Support for user signals, and major changes to internal signal handler
-  handling for proper signal removal and invokation of after signals.
-* Additional signals for various widgets e.g, GtkHandleBox::child_attached,
-  GtkHandleBox::child_detached, GtkWidget::style_set, GtkWidget::parent_set.
-* GtkTooltips became a true descendant of GtkObject via derivation from
-  GtkData and facilitates an extra tip string which can be used as e.g. an
-  index into context help.
-* Split up of the widget/object flags into a private and a public portion,
-  consult docs/widget_system.txt on this.
-* Support for hot keys on gtk programs via gtk_key_snooper_install().
-* Reimplementation of the *_interp functions as *_full functions to provide
-  simple callback functions as well.
-* Idle functions are now prioritized.
-* Many enhancements to GtkNotebook.
-* New widget GtkSpinButton, check out testgtk.
-* New widget GtkTipsQuery for letting the user query tooltips of widgets.
-* Addition of GtkEditable base widget to encapsulate selection and
-  clipboard handling. (GtkEntry and GtkText use this)
-* Text widget more complete.
-* Additions to GtkStatusBar to make it complete.
-* Gdk now supports regions.
-* Access masks for widget arguments (GTK_ARG_READABLE/GTK_ARG_WRITABLE).
-* Function replacements:
-  g_string_hash() -> g_str_hash()
-  g_string_equal() -> g_str_equal()
-  gtk_tooltips_set_tips() -> gtk_tooltips_set_tip()
-* Support for quit handlers in gtk_main().
-* Motif window mangaer hints support.
-* Widget arguments are now flagged for readability/writability.
-* Additions to documentation.
-* Various FAQ updates. (FAQ now included)
-* Clean ups and many many bug fixes by a lot of people all over the place.
-* New, long and descriptive ChangeLog entries for bored readers ;)
+* Additions to docs/Changes-1.2.txt
+* Just warn when loading theme engine fails
+* CLAMP GtkScale digits to a meaningful range
+* GTK_LOCALDIR is now defined in a better fashion
+* New functions (feature freeze, we know...):
+    gtk_menu_set_title()
+    gtk_toggle_button_get_active()
+* Some locale fixups in gtkrc code
+* Fixes to make gtk_radio_button_set_group() keep only
+  one radio button in the group active
+* Foreign windows are now always treated as viewable; this fixes
+  a problem where updating didn't occure properly in GtkPlug
+* DND fixes for 64 bit architectures, and for specifying operations 
+  with modifier keys.
+* Major revisions to GtkLayout: avoid having to create window
+  for NO_WINDOW children, adjust allocations of children as 
+  scrolled so queued draws work, and a resize is queued instead
+  of allocating directly in a put() or move()
 
-Overview of Changes in GTK+ 0.99.3:
+What is new in GTK+ 1.1.13:
 
-* Filesel enhancement / stability changes
-* New widget, gtkcombo 
-* Widgets in the toolbar do not get the focus
-* New widget, gtkstatusbar (still in-progress)
-* g_string_equal renamed g_str_equal
-* g_string_hash renamed g_str_hash
-* new gtkbox functions to allow modification of the child 
-  linkage after the widget tree is setup
-* gtk_*_get_arg() and gtk_*_set_arg() fixes and implementations
-* DND changes/fixes
-* Entry widget now has set_max_length function
-* Handlebox widget changes/fixes 
-* Some work on text widget (still in-progress)
-* Now the toolbar supports arbitrary widgets as well
-* CList has resizable columns again
-* CList now looks consistant with scrolled windows
-* Remove flickering from entry widget
-* Added switch_page signal to notebook widget
-* Documentation additions
-* Other bug fixes...
+* Dnd and selection bug fixes and memory purification.
+* Widget sensitivity fixups.
+* Tooltips windows are now named "gtk-tooltips" so rc file rules
+  can match tooltips windows. Fixed interaction of tooltips and NO_WINDOW
+  widgets.
+* Spin buttons now update their values upon value retrival.
+* Overhaul of the resizing vs. redrawing logic to reduce redrawing needs
+  a lot. Gtk makes full use of the draw_area coalescing code now, which
+  got minorly improved as well.
+* Containers map their Gdk windows after their children now to reduce
+  expose event generation.
+* Gdk event queue fixups, this solves the double-click problems people were
+  recently having.
+* Account for the fact that GSource's are only properly reentrant from
+  within dispatch(), thus we don't do Gdk event processing from within
+  check() or prepare() anymore.
+* Rc files feature a bg_pixmap value of "<none>" now.
+* Improved session management support in Gdk.  
+* Automatic disabling of NLS if no gettext is found should work now.
+* Removed deprecated functions, docs/Changes-1.2.txt gives an overview.
+* Gtk+ development now requires GNU autoconf 2.13, GNU automake 1.4
+  and GNU libtool 1.2d.
+* More bug fixes all over the place.
+
+What is new in GTK+ 1.1.12:
+
+* Korean translation added
+* Fixed memory leaks
+* A few other bug fixes
+
+What is new in GTK+ 1.1.11:
+
+* Dutch, Japanese, Swedish, Polish, and Norwegian translations
+* Removed deprecated _interp variants: gtk_container_foreach_interp, 
+  gtk_idle_add_interp, gtk_timeout_add_interp, gtk_signal_connect_interp
+* Lots of cast corrections
+* Many fixes 
+
+What is new in GTK+ 1.1.9:
+
+* Check for broken glibc 2.0 mb functions and avoid them
+* Label and Entry display fixes 
+* Move main thread back to GDK, for locking when translating events
+* Bug fixes
+
+What is new in GTK+ 1.1.8:
+
+* Added support for gettext and the localization of the standard
+  dialogs.
+* Added line-wrapping for the label, and JUSTIFY_FILL
+* Support reordering via drag and drop in  CList and CTree.
+* Replaced GtkDrawWindow widget with a GTK_USER_DRAW flag
+* Extended gtkpaned API to support minimum sizes and proportional
+  resizing.
+* Changed the handling of shared memory segments so as to 
+  remove the need for GTK+ to set up signal handlers.
+* Re-implemented event loop in terms of the event loop
+  that has been added to GLib 1.1.8
+* Added 'grab_focus' signal to allow keyboard accelerators
+  for entries.
+* Load locale specific RC files if present.
+* Bug fixes.
+
+What is new in GTK+ 1.1.7:
+
+* Fixed memory mis-allocation in default files code
+* Various event handling fixes
+* Wide character support for entry and text
+* Destroy widgets _after_ propagating unrealize signals through 
+  widget heirarchy
+* Only build XIM-support if available
+* Tutorial and examples updates
+* Added gtk_drag_source_unset()
+
+What is new in GTK+ 1.1.6:
+
+* The signal system now features emission hooks whith special semantics,
+  refer to the ChangeLog for this.
+* Minor? speedups and memory reductions to the emission handling of the
+  signal system.
+* _interp() function variants are deprecated now. the corresponding *_full()
+  variants are provided for a long time now.
+* Dnd abort timeout increased to 10 minutes.
+* GtkScrolledWindow inherits from GtkBin now.
+* GTK_POLICY_NEVER is implemented for scrolled windows now.
+* Lots of API clean ups.
+* Incremental freezing abilities.
+* Integrated widgets from the GNOME tree: GtkLayout, GtkPlug and GtkSocket.
+* New window functions for transient relationship, default size, and 
+  geometry hints
+* Default rc files are now read in (<sysconfdir/etc/gtkrc and ~/.gtkrc)
+  GTK_RC_FILES environment variable and functions are provided to configure
+  this behavior
+* Read doc/Changes-1.2.txt to properly adapt your code.
+* Bug Fixes.
+
+What is new in GTK+ 1.1.5:
+
+* Theme integration
+* Widget style modification is now handled through GtkRcStyles
+* GtkPixmaps now grey out pixmaps when insensitive
+* Notebook enhancements
+* Shadow configurability for menubars and handleboxes
+* DND enhancements
+* gtkfilesel now supports automounters better
+* Implementation of expose compression
+* Queued redraws of partial areas
+* Scrolledwindow (+Viewport) source incompatibilities, children that are added
+  to a scrolled window don't get an automatic viewport anymore. a convenience
+  function gtk_scrolled_window_add_with_viewport() is suplied for this task
+* Deprecated functions will now issue a message, informing the programmer about
+  the use of this function. These functions will get removed in future versions
+* Non-functional functions got removed entirely
+* gtk_widget_new() and gtk_object_new() will now auto-construct new objects.
+  A new function gtk_object_default_construct() is provided now which should
+  be called after every gtk_type_new() to perfom the auto-construction
+* Improved argument support of several widgets
+* Bug Fixes
+
+What is new in GTK+ 1.1.3:
+
+* GtkCList/GtkCTree now have the ability to:
+    - hide/show individual columns
+    - disable/enable column resizing
+    - set min and max for column widths
+    - set expander style of the ctree
+    - set/get row and cell styles
+    - set spacing between tree expander and cell contents in ctree
+    - toggle auto_resize for columns
+* Must enhanced DND support, removed old DND code
+* Idle functions are now implemented via GHook, giving a slight speed
+  improvement
+* An environment variable GTK_MODULES which takes a colon seperated
+  list of module names GTK+ will now automatically load at gtk_init() startup
+* GtkFontSel now has support for an extra 'base' filter
+* New function gdk_window_set_root_origin to get the real geometry taking
+  into account window manager offsets
+* New function gtk_text_set_line_wrap to toggle line wrapping
+* New function gtk_widget_add_events which safely adds additional
+  events to a widget's event mask
+* New function gdk_event_get_time to get the timestamp from a generic
+  event
+* New widget GtkCalendar
+* New widget GtkInvisible - InputOnly offscreen windows used for reliable
+  pointer grabs and selection handling in DND code
+* New functions gtk_object_remove_no_notify[_by_id] to remove a certain
+  data portion without invokation of its destroy notifier 
+* gtk_spin_button_construct is now deprecated, use gtk_spin_button_configure
+  instead 
+* gtk_clist_set_border is now deprecated, use gtk_clist_set_shadow_type 
+  instead
+* Removed functions gtk_object_set_data_destroy[_by_id] 
+* Documentation additions/updates 
+* HTML and plain text files are now included in the distribution
+* Bug fixes, typeness corrections, and general fixups
+
+What is new in GTK+ 1.1.2:
+
+* Gtk+ is now featuring runtime loading of dynamic modules via the
+  --gtk-modules= command line switch. such modules have to export a
+  G_MODULE_EXPORT void gtk_module_init (gint *argc, gchar ***argv);
+  function which will be invoked to initialize the module. since such
+  modules may create new widget types, they are always resident.
+* The tutorial has been updated again.
+* Changes to menus including tearoff menus and accelerators.
+* Better support for modal dialogs.
+* Removed CAN_FOCUS by default from scrollbars and button children of toolbar.
+* More improvements and fixes for GtkCList and GtkCTree (i.e. row sorting).
+* GtkCTree rows can be unselectable now.
+* The GtkCTree API has undergone major renames (see ChangeLog entry from Lars
+  Hamann on Tue Aug 18 00:29:13 1998).
+* A bunch of varargs functions changed to get va_lists working on systems that
+  implement va_lists as arrays.
+* Improvements to the gdkrgb code.
+* Improvements to Gdk color handling so we greatly reduce server traffic and
+  don't leak colors anymore.
+* Improved internal widget tree iterators (the GtkContainer::foreach signal
+  vanished because of this).
+* Option menus can have the keyboard focus now.
+* More fixups to the text widget.
+* GtkFileSelection should behave much more nicely in combination with AFS now.
+* Support for label underlining.
+* Support for GLib 1.1.3 log domains.
+* Documentation improvements.
+* Configuration fixes on various platforms.
+* Miscellaneous fixes to XInput support.
+* Build with shared library dependencies on Linux
+* Fix for a major bug in the type systems memory allocation code that could
+  cause random crashes.
+* Libtool update to version 1.2b.
+* Lots of bugfixes and cleanups again ;)
+
+
+What is new in GTK+ 1.1.1:
+
+* Tutorial updates and additions.
+* Key binding support for GtkListItems and GtkList.
+* Extended selection mode and autoscrolling for GtkLists.
+* A GtkCtree now operates on GtkCTreeNode* structures rather than GList*.
+* GtkCTreeNodes can now be created from GNode trees.
+* Bug fixes for GtkNotebook, GtkCList, GtkCombo and GdkWindow reparentation.
+
+
+What is new in GTK+ 1.1.0:
+
+* New widget GtkFontSelector.
+* New featurefull progress bar.
+* New container widget GtkPacker.
+* New object GtkItemFactory, GtkMenuFactory is deprecated.
+* New key binding system, configurable via rcfiles, similar to styles.
+* New widget GtkCTree with drag selections and keyboard movement and
+  and horizontal scrolling. Features also implemented for GtkCList.
+* Significant speedups to widget creation and destruction through caching
+  colormap and visual queries to the XServer.
+* Speedups for type creation and especially gtk_type_is_a() checks.
+* Speedups in signal lookup, creation and emissions and connection handling.
+* Minor speedups with object data allocation and destruction.
+* Additions to the signal handling API (e.g. *_emitv).
+* Support for rc-file reparsing.
+* Resizing logic is now implemented on container widget basis, rather than
+  for toplevel GtkWindows only.
+* Buttons support relief styles now.
+* Some widgets are now allocated through memchunks to behave more memory wise.
+* Newly included file gtkfeatures.h which defines compatibility macros to
+  test for certain API features upon program compilation.
+* Child arguments support for container widgets.
+* Far better support for object arguments, revamp of the underlying
+  mechanism for speed and reusability. Child/object arguments don't
+  need to be preceeded by the "GtkType::" portion anymore.
+* Removed GtkAcceleratorTable in favour of GtkAccelGroup, accelerator display
+  is now performed by a new widget GtkAccelLabel.
+* Overhaul of the resizing code. Resizing behaviour can now be specified
+  on GtkContainer basis, so the underlying algorithm isn't only available
+  for GtkWindows.
+* GtkTables are now fully resizable.
+* The GtkType system now supports an additional base class initialization
+  function.
+* GtkStyles and key bindings can now be looked up depending on the base
+  types of a widget, through a new keyword `class' in rc files.
+* GtkButton derives from GtkBin (finally).  
+* More descriptive error messages on rc parsing.  
+* Runtime information is available to query enum/flag definition values.
+* Upgrade to libtool-1.2
+* Legions of bug fixes, memory leaks, segfaults, of-by-something errors...
+  including those that already went into the 1.0.x branch.
+* A big bunch of features and cosmetic fixups that just got lost in
+  the masses of changes.

NEWS.pre-1-0

@@ -0,0 +1,124 @@
+
+Overview of Changes in GTK+ 1.0.0:
+
+* A few bug fixes.
+
+Overview of Changes in GTK+ 0.99.10:
+
+* Lots of bug fixes
+* Documentation improvements
+* Better looking handlebox
+* A few convenience functions
+
+Overview of Changes in GTK+ 0.99.9:
+
+* Added examples directory, even more examples soon
+* Added optional word wrap to gtktext
+* Changes to gtkhandlebox
+* Lots of bug fixes
+
+Overview of Changes in GTK+ 0.99.8:
+
+* Compilation and configuration fixes
+* DND Fixes
+* New test in testgtk: cursors
+* Tutorial updates/additions
+* Few more FAQ additions
+* More prep for 1.0
+
+Overview of Changes in GTK+ 0.99.7:
+
+* This release is mainly because 0.99.6 did not compile completely
+  due to a missing file.
+* Fixes to Gtk's quit handlers.
+
+Overview of Changes in GTK+ 0.99.6:
+
+* Intermediate release to become 1.0.
+* More signedness corrections for handler functions in gtkmain.h.
+* Semantics of GtkWidget::delete_event changed.
+* Documentation updates.
+* Inclusion of Gtk tutorial.
+* Implementation of a new shutdown method for GtkObject's executed prior to
+  actual destruction. WARNING: this breaks binary compatibility, programs using
+  Gtk need to be recompiled.
+* Clean ups due to compiler warnings.
+* Various widget fixes.
+
+Overview of Fixes in GTK+ 0.99.5:
+
+* Signal signedness and naming corrections
+* rc/style fixes
+* text, entry widget fixes
+* gtkeditable fixes
+* scrollbar flickering fixed
+* check casts are more descriptive
+* DND fixes
+* FAQ updates
+* Bug fixes
+
+Overview of Changes in GTK+ 0.99.4:
+
+* Reference counting revolution integrated.
+  Refer to docs/refcounting.txt on this issue.
+* Implementation of a decent debugging system, you would want
+  to export GTK_DEBUG=objects if you are going to develop gtk applications,
+  refer to docs/debugging.txt for further information.
+* Additions on the signal code for querying information about certain signals,
+  and pending handlers of signals.
+* Support for user signals, and major changes to internal signal handler
+  handling for proper signal removal and invokation of after signals.
+* Additional signals for various widgets e.g, GtkHandleBox::child_attached,
+  GtkHandleBox::child_detached, GtkWidget::style_set, GtkWidget::parent_set.
+* GtkTooltips became a true descendant of GtkObject via derivation from
+  GtkData and facilitates an extra tip string which can be used as e.g. an
+  index into context help.
+* Split up of the widget/object flags into a private and a public portion,
+  consult docs/widget_system.txt on this.
+* Support for hot keys on gtk programs via gtk_key_snooper_install().
+* Reimplementation of the *_interp functions as *_full functions to provide
+  simple callback functions as well.
+* Idle functions are now prioritized.
+* Many enhancements to GtkNotebook.
+* New widget GtkSpinButton, check out testgtk.
+* New widget GtkTipsQuery for letting the user query tooltips of widgets.
+* Addition of GtkEditable base widget to encapsulate selection and
+  clipboard handling. (GtkEntry and GtkText use this)
+* Text widget more complete.
+* Additions to GtkStatusBar to make it complete.
+* Gdk now supports regions.
+* Access masks for widget arguments (GTK_ARG_READABLE/GTK_ARG_WRITABLE).
+* Function replacements:
+  g_string_hash() -> g_str_hash()
+  g_string_equal() -> g_str_equal()
+  gtk_tooltips_set_tips() -> gtk_tooltips_set_tip()
+* Support for quit handlers in gtk_main().
+* Motif window mangaer hints support.
+* Widget arguments are now flagged for readability/writability.
+* Additions to documentation.
+* Various FAQ updates. (FAQ now included)
+* Clean ups and many many bug fixes by a lot of people all over the place.
+* New, long and descriptive ChangeLog entries for bored readers ;)
+
+Overview of Changes in GTK+ 0.99.3:
+
+* Filesel enhancement / stability changes
+* New widget, gtkcombo 
+* Widgets in the toolbar do not get the focus
+* New widget, gtkstatusbar (still in-progress)
+* g_string_equal renamed g_str_equal
+* g_string_hash renamed g_str_hash
+* new gtkbox functions to allow modification of the child 
+  linkage after the widget tree is setup
+* gtk_*_get_arg() and gtk_*_set_arg() fixes and implementations
+* DND changes/fixes
+* Entry widget now has set_max_length function
+* Handlebox widget changes/fixes 
+* Some work on text widget (still in-progress)
+* Now the toolbar supports arbitrary widgets as well
+* CList has resizable columns again
+* CList now looks consistant with scrolled windows
+* Remove flickering from entry widget
+* Added switch_page signal to notebook widget
+* Documentation additions
+* Other bug fixes...

README

@@ -1,18 +1,72 @@
+General Information
+===================
 
-This is GTK+ version 0.99.5.   GTK, which stands for the Gimp ToolKit, 
-is a library for creating graphical user interfaces.  
+This is GTK+ version 1.2.10. GTK+, which stands for the Gimp ToolKit, 
+is a library for creating graphical user interfaces for the X Window 
+System. It is designed to be small, efficient, and flexible. GTK+ is 
+written in C with a very object-oriented approach.
 
 The official ftp site is:
-  ftp://ftp.gimp.org/pub/gtk
+  ftp://ftp.gtk.org/pub/gtk
 
 The official web site is:
-  http://www.gimp.org/gtk
+  http://www.gtk.org/
 
-Patches can be uploaded to:
-  ftp://ftp.gimp.org/incoming
+Information about mailing lists can be found at
+  http://www.gtk.org/mailinglists.html
 
-A mailing list is located at:
-  gtk-list@redhat.com
+Installation
+============
 
-To subscribe: mail -s subscribe gtk-list-request@redhat.com < /dev/null
-(Send mail to gtk-list-request@redhat.com with the subject "subscribe")
+See the file 'INSTALL'
+
+How to report bugs
+==================
+
+Bugs should be reported to the GNOME bug tracking system. 
+(http://bugzilla.gnome.org, product gtk+.) You will need
+to create an account for yourself.
+  
+In the bug report please include:
+  
+* Information about your system. For instance:
+
+   - What operating system and version
+   - What version of X
+   - For Linux, what version of the C library
+
+  And anything else you think is relevant.
+
+* How to reproduce the bug. 
+
+  If you can reproduce it with the testgtk program that is built 
+  in the gtk/ subdirectory, that will be most convenient.  Otherwise, 
+  please include a short test program that exhibits the behavior. 
+  As a last resort, you can also provide a pointer to a larger piece 
+  of software that can be downloaded.
+
+* If the bug was a crash, the exact text that was printed out
+  when the crash occured.
+
+* Further information such as stack traces may be useful, but
+  is not necessary. If you do send a stack trace, and the error
+  is an X error, it will be more useful if the stacktrace
+  is produced running the test program with the --sync command
+  line option.
+
+Patches
+=======
+
+Patches should also be submitted to bugzilla.gnome.org. If the
+patch fixes an existing bug, add the patch as an attachment
+to that bug report.
+
+Otherwise, enter a new bug report that describes the patch,
+and attach the patch to that bug report.
+
+Bug reports containing patches should include the PATCH keyword
+in their keyword fields. If the patch adds to or changes the GTK
+programming interface, the API keyword should also be included.
+  
+Patches should be in unified diff form. (The -u option to GNU
+diff.)

README.cvs-commits

@@ -0,0 +1,63 @@
+GTK+ is part of the GNOME CVS repository. At the current time, any
+person with write access to the GNOME repository, can make changes to
+GTK+. This is a good thing, in that it encourages many people to work
+on GTK+, and progress can be made quickly. However, GTK+ is a fairly
+large and complicated package that many other things depend on, so to
+avoid unnecessary breakage, and to take advantage of the knowledge
+about GTK+ that has been built up over the last 18 months, we'd like
+to ask people commiting to GTK+ to follow a few rules:
+
+0) Ask first. If your changes are major, or could possibly break existing
+   code, you should always ask. If your change is minor and you've
+   been working on GTK+ for a while it probably isn't necessary
+   to ask. But when in doubt, ask. Even if your change is correct,
+   somebody may know a better way to do things.
+
+   If you are making changes to GTK+, you should be subscribed
+   to gtk-devel-list@redhat.com. (Subscription address:  
+   gtk-devel-list-request@redhat.com.) This is a good place to ask
+   about intended changes. 
+
+   If you just want to make a trivial change, and don't want to subscribe, 
+   you can also mail gtk-bugs@gtk.org. Or, alternatively, you can look in 
+   the ChangeLog for somebody who has been making changes to the file 
+   you want to change and email them.
+
+   #gimp on byxnet (irc.gimp.org, irc2.gimp.org, irc3.gimp.org, 
+   irc.germany.gimp.org...)s also a good place to find GTK+ developers to
+   discuss changes with, however, email to gtk-devel-list is the most
+   certain and preferred method.
+
+1) Ask _first_.
+
+2) There must be a ChangeLog for every commit. (If you discover that
+   you only committed half the files you meant to and need to fix that
+   up, or something, you don't need a new ChangeLog entry. But in general,
+   ChangeLog entries are mandatory.) Changes with out ChangeLog entries
+   will be reverted.
+
+3) There _must_ be a ChangeLog for every commit.
+
+Notes:
+
+* If you are going to be changing many files in an experimental fashion,
+  it probably is a good idea to create a separate branch for your changes.
+
+* The ChangeLog entries should preferrably match in date format
+  with the existing entries. You can set how emacs does this
+  by using customize mode:
+
+  - M-x customize
+  - set Programming/Tools/ChangeLog/Add Log Time Format to
+    'Old Format'
+
+ Or, set the add-log-time-format to 'current-time-string in
+ your .emacs file.
+
+Owen Taylor
+13 Aug 1998
+
+
+
+
+

README.in

@@ -0,0 +1,72 @@
+General Information
+===================
+
+This is GTK+ version @GTK_VERSION@. GTK+, which stands for the Gimp ToolKit, 
+is a library for creating graphical user interfaces for the X Window 
+System. It is designed to be small, efficient, and flexible. GTK+ is 
+written in C with a very object-oriented approach.
+
+The official ftp site is:
+  ftp://ftp.gtk.org/pub/gtk
+
+The official web site is:
+  http://www.gtk.org/
+
+Information about mailing lists can be found at
+  http://www.gtk.org/mailinglists.html
+
+Installation
+============
+
+See the file 'INSTALL'
+
+How to report bugs
+==================
+
+Bugs should be reported to the GNOME bug tracking system. 
+(http://bugzilla.gnome.org, product gtk+.) You will need
+to create an account for yourself.
+  
+In the bug report please include:
+  
+* Information about your system. For instance:
+
+   - What operating system and version
+   - What version of X
+   - For Linux, what version of the C library
+
+  And anything else you think is relevant.
+
+* How to reproduce the bug. 
+
+  If you can reproduce it with the testgtk program that is built 
+  in the gtk/ subdirectory, that will be most convenient.  Otherwise, 
+  please include a short test program that exhibits the behavior. 
+  As a last resort, you can also provide a pointer to a larger piece 
+  of software that can be downloaded.
+
+* If the bug was a crash, the exact text that was printed out
+  when the crash occured.
+
+* Further information such as stack traces may be useful, but
+  is not necessary. If you do send a stack trace, and the error
+  is an X error, it will be more useful if the stacktrace
+  is produced running the test program with the --sync command
+  line option.
+
+Patches
+=======
+
+Patches should also be submitted to bugzilla.gnome.org. If the
+patch fixes an existing bug, add the patch as an attachment
+to that bug report.
+
+Otherwise, enter a new bug report that describes the patch,
+and attach the patch to that bug report.
+
+Bug reports containing patches should include the PATCH keyword
+in their keyword fields. If the patch adds to or changes the GTK
+programming interface, the API keyword should also be included.
+  
+Patches should be in unified diff form. (The -u option to GNU
+diff.)

TODO

@@ -1,139 +1,26 @@
-TODO BEFORE GTK 1.0
--------------------
 
-Bugs:
- * pasting into a GtkEntry that already has a very long string,
-   causes the app to hang.
+Outstanding items:
+
+ * focus handling for GtkOptionMenu (needs the previous)
+
+ * implement gtk_default_draw_oval and other missing things in gtkstyle.c.
  
- * Vertical scrollbar: the expose event looks hosed and is causing 
-   quite a bit of flickering
-   Actually this affects both scrollbar implementation, you can best
-   tell if you run the application with --sync (timj)
-
- * signal parameters don't seem to get refreshed on recursive invokations
-   of GTK_NO_RECURSE signals, which causes the restarted emissions to loose
-   their actual point, i.e. parameter changes on the restarted emission,
-   needs further investigation.
-
- * Widget redrawing when the window resizes sometimes messes up.
-   GtkLabels sometimes redraw without clearing up the underlying background on
-   window resizes.
- 
- * Are there still some GtkCList changes outstanding? (Jay Painter)
-   GtkCList is derived from GtkContainer but doesn't implement the
-   need_resize, focus, add and remove methods from containers.
-   it should at least issue a warning upon invokation of not supported
-   member functions.
-
- * GtkTree and GtkList should express in their *_add implementations,
-   that they expect GtkListItems/GtkTreeItems as children. Similar
-   things might apply to other containers.
-
- * delay dnd settings to take effect once a widget is realized, this is
-   to avoid force realizations. i think this goes along with owens dnd
-   changes?
-    -timj
-   The way DND data types are set in GtkWidget really needs to be fixed.
-   This is pretty high on my priority list, and I'll get to it as soon as
-   the column list widget is done.  The correct way dnd data needs to be set
-   is to have a additional keyed data type with GtkWidget, which is applied to
-   the widget's window upon realize.
-   There also needs to be a way to set dnd-data on widget windows which are
-   not the main window (for widgets that create more than one window).
-    -Jay Painter
-   DnD seems to work for me, but yes, there needs to be some sort of
-   gtk_widget layer that makes it easier... Also, adding support for drop
-   zones might be nice.
-    -Elliot
-   This one is reproducabel for me:
-   testgtk --sync
-   popup colorselection
-   drag/drop works
-   start up preview color
-   drag works but not dropping
-   end preview color
-   drag/drop works
-   start up prewiev color
-   segfault in malloc
-    -timj
-
- * Change bitfields to guints from enums for C++ ?
-
- * Force paned window handle to be kept on screen
-
-Additions:
- * widgets which are redrawn because of a gtk_widget_draw(,NULL) should
-   be removed from the redraw queue.
-   
- * GScanner: it might be good to ues stdio and getch() instead of 1-character
-   reads. so one can take advantage of buffering. Currently each read() takes
-   a separate syscall.
-   
- * implement gtk_default_draw_oval
- 
- * Lists should scroll to center the recently selected item if it isn't
-   visible.
-
  * enforce invariants on *_RESIZE* and *_REDRAW* flags.
 
- * asure that child widgets are really get gtk_widget_destroy()ed in their
-   parents destroy handler, and not just unparented or somesuch.
-
- * GtkToolTips:
-   allocate GtkTooltipsData from memchunks
-   look into incorporation of outdated/gtk-dairiki-971208-[01].patch.gz
+ * GtkToolTips: allocate GtkTooltipsData from memchunks
                           
- * Make widget attributes configurable after the widget is created (timj).
-
- * Change gtk_widget_propagate_default_style() mechanism to
-   void gtk_rc_string_export (const gchar *rc_additions,
-                              gboolean     override_rc_styles);
-
- * Configure events for windows that no longer exist fail in
-   XTranslateCoordinates
- 
-TODO AFTER GTK 1.0
-------------------
-
  * Make all widget attributes configurable after the widget is created (timj).
-
- * Seperate GtkObject and signaling system from Gdk dependancies?
-  
- * move *_input_add (wrappers for select(2)) mechanism into glib.
-
- * Make sure a widget added to a list is a list item and a widget added
-   to a menu is a menu item, etc. GTK_BASIC was a first attempt at this,
-   but it fails with subsequent container_add()s. maybe have another
-   GTK_PARENT_BASIC (similar to GTK_PARENT_SENSITIVE) flag, to prevent
-   tree iterations upon every container addition.
-
- * gdk_expose_compress: ala-Xt, this would really help for opaque moves and
-   such
-
- * Entry should have a password mode (and it should show stars
-   for user feedback).
-
- * More dialogs: Print, GtkFontSelector, maybe others...
-
- * Multiple document interface (MDI)?
-
- * Support another widget style? Should be possible using GtkStyle's, but
-   there may be some work needed to remove any style dependencies in widget
-   code. Maybe GtkStyle's should have 'draw_push_button', 'draw_check_button',
-   etc, functions to draw the various widgets.
-   This will be covered by upcoming themability, raster is working on it.
  
+ * Radio buttons need to display CAN/HAS_DEFAULT correctly, if draw_inidicator
+   is TRUE. (Radio buttons do not need to CAN_DEFAULT! OWT)
+
+ * More dialogs: Print, maybe others...
+
  * make the gtk_main callbacks consistent in their add/remove behaviour.
  
- * More work on Documentation
-
  * Check return values on all calls to XIC[Get/Set]Values
 
- * Rewrite the interface to the i18n stuff so GTK widgets don't need to
-   retrieve X values, and so they don't have to know the value of the
-   XNxxx character constants.
-
- * The "-geometry" option should be supported
+ * The "--geometry" option should be supported
 
   - Having gdk_init() parse the geometry option. (putting it into
     GDK means you can use XParseGeometry() without wrapping it)
@@ -155,16 +42,42 @@ TODO AFTER GTK 1.0
     ( You'd have to extend gdk_window_set_hints to accept the
       window gravity option to get it right. )
 
- * Text/Edit widget: (some of these might be bugs that should be fixed now)
+ * Allow moving the separator for paned widgets by dragging 
+   it directly instead of using the handle. 
+
+ * Check into XAddConnectionWatch - is this needed for XIM?
+
+ * Places where a _full variant is needed:
+
+    gtk_init_add
+    gtk_menu_popup
+    gtk_toolbar_prepend_element
+    gtk_toolbar_insert_element
+ 
+ * Try to rationally deal with someone else deleting one of our
+   windows??? This would mean keeping track of our window heirarchy
+   ourselves, for one thing, and will never be safe, because of
+   race conditions.
+
+ * Should all the default handlers really return FALSE? This can
+   cause confusing presses to be sent to containers that actually
+   want to get events on themselves.
+
+ * The menu code should skip separators during keyboard navigation,
+   whether they are sensitive or insensitive.
+
+ * OwnerButtonPressGrab needs to go!
+
+Text/Edit widget:
 
   Bugs:
 
-  - Who knows?
+  - Really big font (150 pt), plus lots of editing caused segfault
 
   Improvements:
 
   - Unify the key binding support in some fashion between the
-    Entry and Text widget widgets (???)
+    Entry and Text widget widgets, use GtkBindings for this.
 
   - Figure out a way not to recompute the geometry on insertions/deletions
     which are large, but not a significant fraction of the
@@ -200,30 +113,88 @@ TODO AFTER GTK 1.0
     appearance on exposes. But this would require using another
     window to get the origins.
 
- ? Allow moving the separator for paned widgets by dragging 
-   it directly instead of using the handle. 
+  - In word wrap mode, break:
 
- ? Mark public use of gtk_tree_remove_item as deprecated - it should be used
-   as:
-         gtk_container_remove (GTK_CONTAINER(tree), widget);
+     aaaaaaaaaaa bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
 
- * Standardize that all strings should be passed as gchar *, not 
-   guchar *. But what about non-string data? (gdk_property_change,
-   gtk_selection_data_set) X makes these sort of things guchar...
+     as:
+                            | Maximum column
+     aaaaaaaaaaa bbbbbbbbbbb|
+     bbbbbbbbbbbbbbbbbbbbbbb|
+     bbbbbbbbb              |
 
- * Check into XAddConnectionWatch - is this needed for XIM?
+     Instead of:
+                            | 
+     aaaaaaaaaaa            |
+     bbbbbbbbbbbbbbbbbbbbbbb|
+     bbbbbbbbbbbbbbbbbbbb   |
 
- * Places where a _full variant is needed:
+  - Blinking cursor
 
-    gtk_clist_set_row_data
-    gtk_init_add
-    gtk_menu_popup
-    gtk_toolbar_prepend_element
-    gtk_toolbar_insert_element
-    gtk_widget_dnd_data_set (should be guchar * with a copy?
-                             shouldn't be there at all...)
-    ??? GtkDrawingarea.draw_data
- 
- * gtk_rc_add_[name/class]_style are broken for bg pixmaps, because
-   styles are broken for bg pixmaps, and RC styles only hack around
-   that.
+  - API's : gtk_text_clear, gtk_text_delete_lines (gint start, gint end),
+    gtk_text_append/prepend, gtk_text_insert_at (gint row, gint column),
+    some function to get the row/column from the x/y-coordinates of a 
+    mouse click, some function to get the word/line under the mouse pointer 
+    [ From: Stefan Jeske <jeske@braunschweig.netsurf.de> ]
+
+  - "changed" emitted when doing deletes on empty Text widget.
+
+  - Delete IC in editable->unrealize, not editable->finalize?
+
+Themes
+======
+
+ - When a scale gets shown/hidden only queue a redraw on the
+   non-window portion, not the whole area.
+
+ - In various places, to avoid shaping windows excessively,
+   we set parent relative backgrounds. This is an ugly
+   hack and needs a better solution. Plus, I don't think
+   these parent-relative backgrounds always persist to
+   when they are actually needed.
+
+   Such calls exist in: GtkButton, GtkHandeBox, GtkItem,
+   GtkListItem, GtkMenu, GtkMenuItem, GtkMisc, 
+   GtkNoteBook, GtkOptionMenu, GtkPaned, GtkPreview,
+   GtkSpinButton and GtkTreeItem.
+
+ - For menus and for GtkWindow's, the realize() function
+   calls paint(), so that background pixmaps can be set
+   ahead of time, and prevent flashing when the window is
+   shown. This is an ugly hack and needs a better solution.
+
+=======
+
+Calendar Widget:
+
+ - The widget should be nicely resizeable vertical too.
+
+ - CALENDAR_MARGIN should be removed, uses INNER_BORDER and
+   style->class->[xy]thickness insted.
+
+ - Flag to choose between using standard three letter abbreviated
+   weekday name or just the first character from it. It looks like
+   that is what most other calendar-widgets do.
+
+ - Arrows should resize with the header-font.
+
+ - The keyboard support has to be finished.
+
+DND
+===
+
+ - Use a cursor instead of an ICON when over Motif windows,
+   to get rid of the current junk that Motif leaves because
+   of its XCopyArea stupidity for doing highlighting.
+
+ - Add a GTK_DRAG_VERIFY target flag and a "drag_data_verify"   
+   signal so that apps can easily check if a, say, 
+   text/uri-list URL looks OK during the drop.
+
+ - Check more for memory leaks.
+
+ - Drag and drop for Entry and Text widgets.
+
+ - Send synthetic motion events on structure changes so 
+   drag_enter/leave get sent properly. (See the popup
+   in testdnd)

acconfig.h

@@ -15,27 +15,35 @@
 
 
 /* Other stuff */
-#undef HAVE_IPC_H
-#undef HAVE_SHM_H
-#undef HAVE_XPM
-#undef HAVE_XSHM_H
-#undef HAVE_SYS_SELECT_H
+#undef ENABLE_NLS
+#undef GTK_COMPILED_WITH_DEBUGGING
 
-#undef IPC_RMID_DEFERRED_RELEASE
+#undef HAVE_CATGETS
+#undef HAVE_GETTEXT
+#undef HAVE_IPC_H
+#undef HAVE_LC_MESSAGES
+#undef HAVE_SHM_H
+#undef HAVE_STPCPY
+#undef HAVE_XSHM_H
+#undef HAVE_SHAPE_EXT
+#undef HAVE_SYS_SELECT_H
+#undef HAVE_XCONVERTCASE
 
 #undef NO_FD_SET
 
 #undef RESOURCE_BASE
 
+/* Define to use X11R6 additions to XIM */
+#undef USE_X11R6_XIM
+
+/* Define if we should use mbstowcs and friends directly
+ */
+#undef USE_NATIVE_LOCALE
+
 #undef XINPUT_NONE
 #undef XINPUT_GXI
 #undef XINPUT_XFREE
 
-#undef GTK_MAJOR_VERSION
-#undef GTK_MINOR_VERSION
-#undef GTK_MICRO_VERSION
-#undef GTK_VERSION
-
 /* Define as the return type of signal handlers (int or void).  */
 #undef RETSIGTYPE
 

acinclude.m4

@@ -0,0 +1,768 @@
+## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
+## Copyright (C) 1996-1999 Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
+
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$lt_target" in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+  enable_fast_install=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_fast_install=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
+[AC_ARG_WITH(gnu-ld,
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+  case "$ac_prog" in
+    # Accept absolute paths.
+changequote(,)dnl
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(ac_cv_path_LD,
+[if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      ac_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+	test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN(AC_PROG_LD_GNU,
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  ac_cv_prog_gnu_ld=yes
+else
+  ac_cv_prog_gnu_ld=no
+fi])
+])
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(ac_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  ac_cv_path_NM="$NM"
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	ac_cv_path_NM="$ac_dir/nm -B"
+	break
+      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	ac_cv_path_NM="$ac_dir/nm -p"
+	break
+      else
+	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+	continue # so that we can try to find one that supports BSD flags
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi])
+NM="$ac_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+  # These system don't have libm
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
+  ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library, adds --enable-ltdl-convenience to
+# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case "$enable_ltdl_convenience" in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library, and adds --enable-ltdl-install to
+# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    INCLTDL=
+  fi
+])
+
+dnl old names
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# Modified to never use included libintl. 
+# Owen Taylor <otaylor@redhat.com>, 12/15/1998
+#
+#
+# This file can be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 5
+
+AC_DEFUN(AM_GTK_WITH_NLS,
+  [AC_MSG_CHECKING([whether NLS is requested])
+    dnl Default is enabled NLS
+    AC_ARG_ENABLE(nls,
+      [  --disable-nls           do not use Native Language Support],
+      USE_NLS=$enableval, USE_NLS=yes)
+    AC_MSG_RESULT($USE_NLS)
+    AC_SUBST(USE_NLS)
+
+    USE_INCLUDED_LIBINTL=no
+
+    dnl If we use NLS figure out what method
+    if test "$USE_NLS" = "yes"; then
+#      AC_DEFINE(ENABLE_NLS)
+#      AC_MSG_CHECKING([whether included gettext is requested])
+#      AC_ARG_WITH(included-gettext,
+#        [  --with-included-gettext use the GNU gettext library included here],
+#        nls_cv_force_use_gnu_gettext=$withval,
+#        nls_cv_force_use_gnu_gettext=no)
+#      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+      nls_cv_force_use_gnu_gettext="no"
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+        dnl User does not insist on using GNU NLS library.  Figure out what
+        dnl to use.  If gettext or catgets are available (in this order) we
+        dnl use this.  Else we have to fall back to GNU NLS library.
+	dnl catgets is only used if permitted by option --with-catgets.
+	nls_cv_header_intl=
+	nls_cv_header_libgt=
+	CATOBJEXT=NONE
+
+	AC_CHECK_HEADER(libintl.h,
+	  [AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
+	    [AC_TRY_LINK([#include <libintl.h>], [return (int) dgettext ("","")],
+	       gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no)])
+
+	   if test "$gt_cv_func_dgettext_libc" != "yes"; then
+	     AC_CHECK_LIB(intl, bindtextdomain,
+	       [AC_CACHE_CHECK([for dgettext in libintl],
+		 gt_cv_func_dgettext_libintl,
+		 [AC_CHECK_LIB(intl, dgettext,
+		  gt_cv_func_dgettext_libintl=yes,
+		  gt_cv_func_dgettext_libintl=no)],
+		 gt_cv_func_dgettext_libintl=no)])
+	   fi
+
+           if test "$gt_cv_func_dgettext_libintl" = "yes"; then
+	     LIBS="$LIBS -lintl";
+           fi
+
+	   if test "$gt_cv_func_dgettext_libc" = "yes" \
+	      || test "$gt_cv_func_dgettext_libintl" = "yes"; then
+	      AC_DEFINE(HAVE_GETTEXT)
+	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+	      if test "$MSGFMT" != "no"; then
+		AC_CHECK_FUNCS(dcgettext)
+		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+			       return _nl_msg_cat_cntr],
+		  [CATOBJEXT=.gmo
+		   DATADIRNAME=share],
+		  [CATOBJEXT=.mo
+		   DATADIRNAME=lib])
+		INSTOBJEXT=.mo
+	      fi
+	    fi
+
+	    # Added by Martin Baulig 12/15/98 for libc5 systems
+	    if test "$gt_cv_func_dgettext_libc" != "yes" \
+	       && test "$gt_cv_func_dgettext_libintl" = "yes"; then
+	       INTLLIBS=-lintl
+	       LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+	    fi
+	])
+
+        if test "$CATOBJEXT" = "NONE"; then
+	  AC_MSG_CHECKING([whether catgets can be used])
+	  AC_ARG_WITH(catgets,
+	    [  --with-catgets          use catgets functions if available],
+	    nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
+	  AC_MSG_RESULT($nls_cv_use_catgets)
+
+	  if test "$nls_cv_use_catgets" = "yes"; then
+	    dnl No gettext in C library.  Try catgets next.
+	    AC_CHECK_LIB(i, main)
+	    AC_CHECK_FUNC(catgets,
+	      [AC_DEFINE(HAVE_CATGETS)
+	       INTLOBJS="\$(CATOBJS)"
+	       AC_PATH_PROG(GENCAT, gencat, no)dnl
+#	       if test "$GENCAT" != "no"; then
+#		 AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
+#		 if test "$GMSGFMT" = "no"; then
+#		   AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
+#		    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
+#		 fi
+#		 AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+#		   [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+#		 USE_INCLUDED_LIBINTL=yes
+#		 CATOBJEXT=.cat
+#		 INSTOBJEXT=.cat
+#		 DATADIRNAME=lib
+#		 INTLDEPS='$(top_builddir)/intl/libintl.a'
+#		 INTLLIBS=$INTLDEPS
+#		 LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+#		 nls_cv_header_intl=intl/libintl.h
+#		 nls_cv_header_libgt=intl/libgettext.h
+#              fi
+            ])
+	  fi
+        fi
+
+        if test "$CATOBJEXT" = "NONE"; then
+	  dnl Neither gettext nor catgets in included in the C library.
+	  dnl Fall back on GNU gettext library.
+	  nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" != "yes"; then
+        AC_DEFINE(ENABLE_NLS)
+      else
+         # Unset this variable since we use the non-zero value as a flag.
+         CATOBJEXT=
+#        dnl Mark actions used to generate GNU NLS library.
+#        INTLOBJS="\$(GETTOBJS)"
+#        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+#	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+#        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+#        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+#	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+#        AC_SUBST(MSGFMT)
+#	USE_INCLUDED_LIBINTL=yes
+#        CATOBJEXT=.gmo
+#        INSTOBJEXT=.mo
+#        DATADIRNAME=share
+#	INTLDEPS='$(top_builddir)/intl/libintl.a'
+#	INTLLIBS=$INTLDEPS
+#	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+#        nls_cv_header_intl=intl/libintl.h
+#        nls_cv_header_libgt=intl/libgettext.h
+      fi
+
+      dnl Test whether we really found GNU xgettext.
+      if test "$XGETTEXT" != ":"; then
+	dnl If it is no GNU xgettext we define it as : so that the
+	dnl Makefiles still can work.
+	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+	  : ;
+	else
+	  AC_MSG_RESULT(
+	    [found xgettext program is not GNU xgettext; ignore it])
+	  XGETTEXT=":"
+	fi
+      fi
+
+      # We need to process the po/ directory.
+      POSUB=po
+    else
+      DATADIRNAME=share
+      nls_cv_header_intl=intl/libintl.h
+      nls_cv_header_libgt=intl/libgettext.h
+    fi
+    AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
+    AC_OUTPUT_COMMANDS(
+     [case "$CONFIG_FILES" in *po/Makefile.in*)
+        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
+      esac])
+
+
+#    # If this is used in GNU gettext we have to set USE_NLS to `yes'
+#    # because some of the sources are only built for this goal.
+#    if test "$PACKAGE" = gettext; then
+#      USE_NLS=yes
+#      USE_INCLUDED_LIBINTL=yes
+#    fi
+
+    dnl These rules are solely for the distribution goal.  While doing this
+    dnl we only have to keep exactly one list of the available catalogs
+    dnl in configure.in.
+    for lang in $ALL_LINGUAS; do
+      GMOFILES="$GMOFILES $lang.gmo"
+      POFILES="$POFILES $lang.po"
+    done
+
+    dnl Make all variables we use known to autoconf.
+    AC_SUBST(USE_INCLUDED_LIBINTL)
+    AC_SUBST(CATALOGS)
+    AC_SUBST(CATOBJEXT)
+    AC_SUBST(DATADIRNAME)
+    AC_SUBST(GMOFILES)
+    AC_SUBST(INSTOBJEXT)
+    AC_SUBST(INTLDEPS)
+    AC_SUBST(INTLLIBS)
+    AC_SUBST(INTLOBJS)
+    AC_SUBST(POFILES)
+    AC_SUBST(POSUB)
+  ])
+
+AC_DEFUN(AM_GTK_GNU_GETTEXT,
+  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+   AC_REQUIRE([AC_PROG_CC])dnl
+   AC_REQUIRE([AC_PROG_RANLIB])dnl
+   AC_REQUIRE([AC_ISC_POSIX])dnl
+   AC_REQUIRE([AC_HEADER_STDC])dnl
+   AC_REQUIRE([AC_C_CONST])dnl
+   AC_REQUIRE([AC_C_INLINE])dnl
+   AC_REQUIRE([AC_TYPE_OFF_T])dnl
+   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+   AC_REQUIRE([AC_FUNC_MMAP])dnl
+
+   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h sys/param.h])
+   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+strdup __argz_count __argz_stringify __argz_next])
+
+   if test "${ac_cv_func_stpcpy+set}" != "set"; then
+     AC_CHECK_FUNCS(stpcpy)
+   fi
+   if test "${ac_cv_func_stpcpy}" = "yes"; then
+     AC_DEFINE(HAVE_STPCPY)
+   fi
+
+   AM_LC_MESSAGES
+   AM_GTK_WITH_NLS
+
+   if test "x$CATOBJEXT" != "x"; then
+     if test "x$ALL_LINGUAS" = "x"; then
+       LINGUAS=
+     else
+       AC_MSG_CHECKING(for catalogs to be installed)
+       NEW_LINGUAS=
+       for lang in ${LINGUAS=$ALL_LINGUAS}; do
+         case "$ALL_LINGUAS" in
+          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+         esac
+       done
+       LINGUAS=$NEW_LINGUAS
+       AC_MSG_RESULT($LINGUAS)
+     fi
+
+     dnl Construct list of names of catalog files to be constructed.
+     if test -n "$LINGUAS"; then
+       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+     fi
+   fi
+
+   dnl The reference to <locale.h> in the installed <libintl.h> file
+   dnl must be resolved because we cannot expect the users of this
+   dnl to define HAVE_LOCALE_H.
+   if test $ac_cv_header_locale_h = yes; then
+     INCLUDE_LOCALE_H="#include <locale.h>"
+   else
+     INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>.  Take care yourself.  */"
+   fi
+   AC_SUBST(INCLUDE_LOCALE_H)
+
+   dnl Determine which catalog format we have (if any is needed)
+   dnl For now we know about two different formats:
+   dnl   Linux libc-5 and the normal X/Open format
+   test -d intl || mkdir intl
+   if test "$CATOBJEXT" = ".cat"; then
+     AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
+
+     dnl Transform the SED scripts while copying because some dumb SEDs
+     dnl cannot handle comments.
+     sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
+   fi
+   dnl po2tbl.sed is always needed.
+   sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+     $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
+
+   dnl In the intl/Makefile.in we have a special dependency which makes
+   dnl only sense for gettext.  We comment this out for non-gettext
+   dnl packages.
+   if test "$PACKAGE" = "gettext"; then
+     GT_NO="#NO#"
+     GT_YES=
+   else
+     GT_NO=
+     GT_YES="#YES#"
+   fi
+   AC_SUBST(GT_NO)
+   AC_SUBST(GT_YES)
+
+   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
+   dnl Try to locate is.
+   MKINSTALLDIRS=
+   if test -n "$ac_aux_dir"; then
+     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+   fi
+   if test -z "$MKINSTALLDIRS"; then
+     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+   fi
+   AC_SUBST(MKINSTALLDIRS)
+
+   dnl *** For now the libtool support in intl/Makefile is not for real.
+   l=
+   AC_SUBST(l)
+
+   dnl Generate list of files to be processed by xgettext which will
+   dnl be included in po/Makefile.
+   test -d po || mkdir po
+   if test "x$srcdir" != "x."; then
+     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+       posrcprefix="$srcdir/"
+     else
+       posrcprefix="../$srcdir/"
+     fi
+   else
+     posrcprefix="../"
+   fi
+   rm -f po/POTFILES
+   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+	< $srcdir/po/POTFILES.in > po/POTFILES
+  ])
+

autogen.sh

@@ -1,27 +1,28 @@
 #!/bin/sh
 # Run this to generate all the initial makefiles, etc.
 
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+PROJECT=Gtk+
+TEST_TYPE=-d
+FILE=gdk
+
 DIE=0
 
 (autoconf --version) < /dev/null > /dev/null 2>&1 || {
 	echo
-	echo "You must have autoconf installed to compile GTK+."
+	echo "You must have autoconf installed to compile $PROJECT."
 	echo "Download the appropriate package for your distribution,"
 	echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
 	DIE=1
 }
 
-(libtool --version) < /dev/null > /dev/null 2>&1 || {
-	echo
-	echo "You must have libtool installed to compile GTK+."
-	echo "Get ftp://alpha.gnu.org/gnu/libtool-1.0h.tar.gz"
-	echo "(or a newer version if it is available)"
-	DIE=1
-}
-
 (automake --version) < /dev/null > /dev/null 2>&1 || {
 	echo
-	echo "You must have automake installed to compile GTK+."
+	echo "You must have automake installed to compile $PROJECT."
 	echo "Get ftp://ftp.cygnus.com/pub/home/tromey/automake-1.2d.tar.gz"
 	echo "(or a newer version if it is available)"
 	DIE=1
@@ -31,8 +32,8 @@ if test "$DIE" -eq 1; then
 	exit 1
 fi
 
-(test -d gtk && test -d glib) || {
-	echo "You must run this script in the top-level GTK+ directory"
+test $TEST_TYPE $FILE || {
+	echo "You must run this script in the top-level $PROJECT directory"
 	exit 1
 }
 
@@ -41,12 +42,45 @@ if test -z "$*"; then
         echo "to pass any to it, please specify them on the $0 command line."
 fi
 
-for i in glib .
-do 
-  echo processing $i
-  (cd $i; aclocal; automake; autoconf)
-done
-./configure "$@"
+case $CC in
+*xlc | *xlc\ * | *lcc | *lcc\ *) am_opt=--include-deps;;
+esac
+
+if test -z "$ACLOCAL_FLAGS"; then
+
+	acdir=`aclocal --print-ac-dir`
+        m4list="glib.m4 gettext.m4"
+
+	for file in $m4list
+	do
+		if [ ! -f "$acdir/$file" ]; then
+			echo "WARNING: aclocal's directory is $acdir, but..."
+			echo "         no file $acdir/$file"
+			echo "         You may see fatal macro warnings below."
+			echo "         If these files are installed in /some/dir, set the ACLOCAL_FLAGS "
+			echo "         environment variable to \"-I /some/dir\", or install"
+			echo "         $acdir/$file."
+			echo ""
+		fi
+	done
+fi
+
+echo "Running gettextize...  Ignore non-fatal messages."
+# Hmm, we specify --force here, since otherwise things dont'
+# get added reliably, but we don't want to overwrite intl
+# while making dist.
+echo "no" | gettextize --copy --force
+
+aclocal $ACLOCAL_FLAGS
+
+# optionally feature autoheader
+(autoheader --version)  < /dev/null > /dev/null 2>&1 && autoheader
+
+automake -a $am_opt
+autoconf
+cd $ORIGDIR
+
+$srcdir/configure --enable-maintainer-mode "$@"
 
 echo 
-echo "Now type 'make' to compile GTK+."
+echo "Now type 'make' to compile $PROJECT."

config.guess

@@ -1,6 +1,7 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
+#   Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -23,6 +24,7 @@
 
 # Written by Per Bothner <bothner@cygnus.com>.
 # The master version of this file is at the FSF in /home/gd/gnu/lib.
+# Please send patches to <autoconf-patches@gnu.org>.
 #
 # This script attempts to guess a canonical system name similar to
 # config.sub.  If it succeeds, it prints the system name on stdout, and
@@ -35,6 +37,20 @@
 # (but try to keep the structure clean).
 #
 
+# Use $HOST_CC if defined. $CC may point to a cross-compiler
+if test x"$CC_FOR_BUILD" = x; then
+  if test x"$HOST_CC" != x; then
+    CC_FOR_BUILD="$HOST_CC"
+  else
+    if test x"$CC" != x; then
+      CC_FOR_BUILD="$CC"
+    else
+      CC_FOR_BUILD=cc
+    fi
+  fi
+fi
+
+
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi@noc.rutgers.edu 8/24/94.)
 if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
@@ -46,7 +62,8 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
 
 # Note: order is significant - the case branches are not exclusive.
 
@@ -59,7 +76,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	cat <<EOF >dummy.s
+	cat <<EOF >$dummy.s
 	.globl main
 	.ent main
 main:
@@ -76,9 +93,9 @@ main:
 	ret \$31,(\$26),1
 	.end main
 EOF
-	${CC-cc} dummy.s -o dummy 2>/dev/null
+	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
 	if test "$?" = 0 ; then
-		./dummy
+		./$dummy
 		case "$?" in
 			7)
 				UNAME_MACHINE="alpha"
@@ -97,8 +114,14 @@ EOF
 				;;
 		esac
 	fi
-	rm -f dummy.s dummy
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
+	rm -f $dummy.s $dummy
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit 0 ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
 	exit 0 ;;
     21064:Windows_NT:50:3)
 	echo alpha-dec-winnt3.5
@@ -112,6 +135,9 @@ EOF
     amiga:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit 0 ;;
     arc64:OpenBSD:*:*)
 	echo mips64el-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
@@ -130,6 +156,9 @@ EOF
     wgrisc:OpenBSD:*:*)
 	echo mipsel-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit 0 ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit 0;;
@@ -139,7 +168,7 @@ EOF
     SR2?01:HI-UX/MPP:*:*)
 	echo hppa1.1-hitachi-hiuxmpp
 	exit 0;;
-    Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
 	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
 		echo pyramid-pyramid-sysv3
@@ -147,9 +176,12 @@ EOF
 		echo pyramid-pyramid-bsd
 	fi
 	exit 0 ;;
-    NILE:*:*:dcosx)
+    NILE*:*:*:dcosx)
 	echo pyramid-pyramid-svr4
 	exit 0 ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit 0 ;;
@@ -195,6 +227,32 @@ EOF
     atari*:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor 
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit 0 ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit 0 ;;
     sun3*:NetBSD:*:*)
 	echo m68k-sun-netbsd${UNAME_RELEASE}
 	exit 0 ;;
@@ -216,6 +274,9 @@ EOF
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
 	exit 0 ;;
+    macppc:NetBSD:*:*)
+        echo powerpc-apple-netbsd${UNAME_RELEASE}
+        exit 0 ;;
     RISC*:Mach:*:*)
 	echo mips-dec-mach_bsd4.3
 	exit 0 ;;
@@ -225,12 +286,16 @@ EOF
     VAX*:ULTRIX*:*:*)
 	echo vax-dec-ultrix${UNAME_RELEASE}
 	exit 0 ;;
-    2020:CLIX:*:*)
+    2020:CLIX:*:* | 2430:CLIX:*:*)
 	echo clipper-intergraph-clix${UNAME_RELEASE}
 	exit 0 ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
-	sed 's/^	//' << EOF >dummy.c
-	int main (argc, argv) int argc; char **argv; {
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
 	#if defined (host_mips) && defined (MIPSEB)
 	#if defined (SYSTYPE_SYSV)
 	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
@@ -245,10 +310,10 @@ EOF
 	  exit (-1);
 	}
 EOF
-	${CC-cc} dummy.c -o dummy \
-	  && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && rm dummy.c dummy && exit 0
-	rm -f dummy.c dummy
+	$CC_FOR_BUILD $dummy.c -o $dummy \
+	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
 	echo mips-mips-riscos${UNAME_RELEASE}
 	exit 0 ;;
     Night_Hawk:Power_UNIX:*:*)
@@ -266,15 +331,18 @@ EOF
     AViiON:dgux:*:*)
         # DG/UX returns AViiON for all architectures
         UNAME_PROCESSOR=`/usr/bin/uname -p`
-        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
-	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
-	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
 		echo m88k-dg-dgux${UNAME_RELEASE}
-	else
+	    else
 		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
-        else echo i586-dg-dgux${UNAME_RELEASE}
-        fi
  	exit 0 ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
@@ -300,7 +368,7 @@ EOF
 	exit 0 ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		sed 's/^		//' << EOF >dummy.c
+		sed 's/^		//' << EOF >$dummy.c
 		#include <sys/systemcfg.h>
 
 		main()
@@ -311,8 +379,8 @@ EOF
 			exit(0);
 			}
 EOF
-		${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
-		rm -f dummy.c dummy
+		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+		rm -f $dummy.c $dummy
 		echo rs6000-ibm-aix3.2.5
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
 		echo rs6000-ibm-aix3.2.4
@@ -321,7 +389,8 @@ EOF
 	fi
 	exit 0 ;;
     *:AIX:*:4)
-	if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
 	else
 		IBM_ARCH=powerpc
@@ -354,18 +423,50 @@ EOF
     hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
 	echo m68k-hp-bsd4.4
 	exit 0 ;;
-    9000/[3478]??:HP-UX:*:*)
+    9000/[34678]??:HP-UX:*:*)
 	case "${UNAME_MACHINE}" in
 	    9000/31? )            HP_ARCH=m68000 ;;
 	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
-	    9000/8?? )            HP_ARCH=hppa1.0 ;;
+	    9000/[678][0-9][0-9])
+              sed 's/^              //' << EOF >$dummy.c
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+	rm -f $dummy.c $dummy
 	esac
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
 	exit 0 ;;
     3050*:HI-UX:*:*)
-	sed 's/^	//' << EOF >dummy.c
+	sed 's/^	//' << EOF >$dummy.c
 	#include <unistd.h>
 	int
 	main ()
@@ -390,8 +491,8 @@ EOF
 	  exit (0);
 	}
 EOF
-	${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
-	rm -f dummy.c dummy
+	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
 	echo unknown-hitachi-hiuxwe2
 	exit 0 ;;
     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
@@ -400,6 +501,9 @@ EOF
     9000/8??:4.3bsd:*:*)
 	echo hppa1.0-hp-bsd
 	exit 0 ;;
+    *9??*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit 0 ;;
     hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
 	echo hppa1.1-hp-osf
 	exit 0 ;;
@@ -416,6 +520,9 @@ EOF
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
 	exit 0 ;;
+    hppa*:OpenBSD:*:*)
+	echo hppa-unknown-openbsd
+	exit 0 ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
         exit 0 ;;
@@ -448,11 +555,14 @@ EOF
     CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE}
 	exit 0 ;;
+    CRAY*T3E:*:*:*)
+	echo alpha-cray-unicosmk${UNAME_RELEASE}
+	exit 0 ;;
     CRAY-2:*:*:*)
 	echo cray2-cray-unicos
         exit 0 ;;
     F300:UNIX_System_V:*:*)
-        FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
         echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
         exit 0 ;;
@@ -465,26 +575,47 @@ EOF
     hp300:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
-    i?86:BSD/386:*:* | *:BSD/OS:*:*)
+    i?86:BSD/386:*:* | i?86:BSD/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
 	exit 0 ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
     *:FreeBSD:*:*)
+	if test -x /usr/bin/objformat; then
+	    if test "elf" = "`/usr/bin/objformat`"; then
+		echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
+		exit 0
+	    fi
+	fi
 	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit 0 ;;
     *:NetBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
 	exit 0 ;;
     *:OpenBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
 	exit 0 ;;
     i*:CYGWIN*:*)
-	echo i386-pc-cygwin32
+	echo ${UNAME_MACHINE}-pc-cygwin
 	exit 0 ;;
     i*:MINGW*:*)
-	echo i386-pc-mingw32
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit 0 ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i386-pc-interix
+	exit 0 ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
 	exit 0 ;;
     p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin32
+	echo powerpcle-unknown-cygwin
 	exit 0 ;;
     prep*:SunOS:5.*:*)
 	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
@@ -493,9 +624,11 @@ EOF
 	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit 0 ;;
     *:Linux:*:*)
+
 	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us.
-	ld_help_string=`ld --help 2>&1`
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	ld_help_string=`cd /; ld --help 2>&1`
 	ld_supported_emulations=`echo $ld_help_string \
 			 | sed -ne '/supported emulations:/!d
 				    s/[ 	][ 	]*/ /g
@@ -503,15 +636,74 @@ EOF
 				    s/ .*//
 				    p'`
         case "$ld_supported_emulations" in
-	  i?86linux)  echo "${UNAME_MACHINE}-pc-linux-gnuaout"      ; exit 0 ;;
-	  i?86coff)   echo "${UNAME_MACHINE}-pc-linux-gnucoff"      ; exit 0 ;;
-	  sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
-	  m68klinux)  echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
-	  elf32ppc)   echo "powerpc-unknown-linux-gnu"              ; exit 0 ;;
+	  *ia64)
+		echo "${UNAME_MACHINE}-unknown-linux"
+		exit 0
+		;;
+	  i?86linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0
+		;;
+	  i?86coff)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit 0
+		;;
+	  sparclinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  armlinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32arm*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	  armelf_linux*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	  m68klinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32ppc)
+		# Determine Lib Version
+		cat >$dummy.c <<EOF
+#include <features.h>
+#if defined(__GLIBC__)
+extern char __libc_version[];
+extern char __libc_release[];
+#endif
+main(argc, argv)
+     int argc;
+     char *argv[];
+{
+#if defined(__GLIBC__)
+  printf("%s %s\n", __libc_version, __libc_release);
+#else
+  printf("unkown\n");
+#endif
+  return 0;
+}
+EOF
+		LIBC=""
+		$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+		if test "$?" = 0 ; then
+			./$dummy | grep 1\.99 > /dev/null
+			if test "$?" = 0 ; then
+				LIBC="libc1"
+			fi
+		fi	
+		rm -f $dummy.c $dummy
+		echo powerpc-unknown-linux-gnu${LIBC}
+		exit 0
+		;;
 	esac
 
 	if test "${UNAME_MACHINE}" = "alpha" ; then
-		sed 's/^	//'  <<EOF >dummy.s
+		sed 's/^	//'  <<EOF >$dummy.s
 		.globl main
 		.ent main
 	main:
@@ -529,9 +721,9 @@ EOF
 		.end main
 EOF
 		LIBC=""
-		${CC-cc} dummy.s -o dummy 2>/dev/null
+		$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
 		if test "$?" = 0 ; then
-			./dummy
+			./$dummy
 			case "$?" in
 			7)
 				UNAME_MACHINE="alpha"
@@ -548,22 +740,23 @@ EOF
 			16)
 				UNAME_MACHINE="alphaev6"
 				;;
-			esac	
+			esac
 
-			objdump --private-headers dummy | \
+			objdump --private-headers $dummy | \
 			  grep ld.so.1 > /dev/null
 			if test "$?" = 0 ; then
 				LIBC="libc1"
 			fi
-		fi	
-		rm -f dummy.s dummy
+		fi
+		rm -f $dummy.s $dummy
 		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
 	elif test "${UNAME_MACHINE}" = "mips" ; then
-	  cat >dummy.c <<EOF
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
+	  cat >$dummy.c <<EOF
+#ifdef __cplusplus
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
 #ifdef __MIPSEB__
   printf ("%s-unknown-linux-gnu\n", argv[1]);
 #endif
@@ -573,8 +766,8 @@ main(argc, argv)
   return 0;
 }
 EOF
-	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
-	  rm -f dummy.c dummy
+	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+	  rm -f $dummy.c $dummy
 	else
 	  # Either a pre-BFD a.out linker (linux-gnuoldld)
 	  # or one that does not give us useful --help.
@@ -593,12 +786,13 @@ EOF
 	    ;;
 	  esac
 	  # Determine whether the default compiler is a.out or elf
-	  cat >dummy.c <<EOF
+	  cat >$dummy.c <<EOF
 #include <features.h>
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
+#ifdef __cplusplus
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
 #ifdef __ELF__
 # ifdef __GLIBC__
 #  if __GLIBC__ >= 2
@@ -615,8 +809,8 @@ main(argc, argv)
   return 0;
 }
 EOF
-	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
-	  rm -f dummy.c dummy
+	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+	  rm -f $dummy.c $dummy
 	fi ;;
 # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
 # are messed up and put the nodename in both sysname and nodename.
@@ -632,10 +826,20 @@ EOF
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
 	exit 0 ;;
     i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
 	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit 0 ;;
+    i?86:*:5:7*)
+        # Fixed at (any) Pentium or better
+        UNAME_MACHINE=i586
+        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+	else
+	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
 	fi
 	exit 0 ;;
     i?86:*:3.2:*)
@@ -647,6 +851,10 @@ EOF
 		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
 		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
 			&& UNAME_MACHINE=i586
+		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
 		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
 	else
 		echo ${UNAME_MACHINE}-pc-sysv32
@@ -693,7 +901,7 @@ EOF
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
 	exit 0 ;;
-    i?86:LynxOS:2.*:*)
+    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
 	exit 0 ;;
     TSUNAMI:LynxOS:2.*:*)
@@ -705,6 +913,9 @@ EOF
     SM[BE]S:UNIX_SV:*:*)
 	echo mips-dde-sysv${UNAME_RELEASE}
 	exit 0 ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
     RM*:SINIX-*:*:*)
 	echo mips-sni-sysv4
 	exit 0 ;;
@@ -735,19 +946,43 @@ EOF
     news*:NEWS-OS:*:6*)
 	echo mips-sony-newsos6
 	exit 0 ;;
-    R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
 	        echo mips-nec-sysv${UNAME_RELEASE}
 	else
 	        echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
         exit 0 ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit 0 ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit 0 ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit 0 ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:QNX:*:4*)
+	echo i386-qnx-qnx${UNAME_VERSION}
+	exit 0 ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
 
-cat >dummy.c <<EOF
+cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
 # include <sys/types.h>
 # include <sys/utsname.h>
@@ -785,7 +1020,10 @@ main ()
 #endif
   int version;
   version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
   exit (0);
 #endif
 
@@ -845,8 +1083,8 @@ main ()
 }
 EOF
 
-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
-rm -f dummy.c dummy
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
 
 # Apollos put the system type in the environment.
 

config.h.in

@@ -1,50 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define if you have a working `mmap' system call.  */
-#undef HAVE_MMAP
-
-/* Define as __inline if that's what the C compiler calls it.  */
-#undef inline
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-
-/* Define if the X Window System is missing or not being used.  */
-#undef X_DISPLAY_MISSING
-
-/* Other stuff */
-#undef HAVE_IPC_H
-#undef HAVE_SHM_H
-#undef HAVE_XPM
-#undef HAVE_XSHM_H
-#undef HAVE_SYS_SELECT_H
-
-#undef IPC_RMID_DEFERRED_RELEASE
-
-#undef NO_FD_SET
-
-#undef RESOURCE_BASE
-
-#undef XINPUT_NONE
-#undef XINPUT_GXI
-#undef XINPUT_XFREE
-
-#undef GTK_MAJOR_VERSION
-#undef GTK_MINOR_VERSION
-#undef GTK_MICRO_VERSION
-#undef GTK_VERSION
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define if you have the getpagesize function.  */
-#undef HAVE_GETPAGESIZE
-
-/* Define if you have the <unistd.h> header file.  */
-#undef HAVE_UNISTD_H

config.sub

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Configuration validation subroutine script, version 1.1.
-#   Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+#   Copyright (C) 1991, 92-97, 1998, 1999 Free Software Foundation, Inc.
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
 # can handle that machine.  It does not imply ALL GNU software can.
@@ -98,11 +98,21 @@ case $os in
 		os=
 		basic_machine=$1
 		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
 	-sco5)
-		os=sco3.2v5
+		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco4)
@@ -121,6 +131,9 @@ case $os in
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-isc)
 		os=-isc2.2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -143,26 +156,37 @@ case $os in
 	-psos*)
 		os=-psos
 		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
 esac
 
 # Decode aliases for certain CPU-COMPANY combinations.
 case $basic_machine in
 	# Recognize the basic CPU types without company name.
 	# Some are omitted here because they have special meanings below.
-	tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
-		| arme[lb] | pyramid | mn10200 | mn10300 \
-		| tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
-		| alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
-		| i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
-		| mips64 | mipsel | mips64el | mips64orion | mips64orionel \
-		| mipstx39 | mipstx39el \
-		| sparc | sparclet | sparclite | sparc64 | v850)
+	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+		| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
+		| 580 | i960 | h8300 \
+		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+		| alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \
+		| we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
+		| 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
+		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
+		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+		| mips64vr5000 | miprs64vr5000el | mcore \
+		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+		| thumb | d10v | fr30)
 		basic_machine=$basic_machine-unknown
 		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
+		;;
+
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
 	# (2) the word "unknown" tends to confuse beginning users.
-	i[3456]86)
+	i[34567]86)
 	  basic_machine=$basic_machine-pc
 	  ;;
 	# Object if more than one company name word.
@@ -171,27 +195,45 @@ case $basic_machine in
 		exit 1
 		;;
 	# Recognize the basic CPU types with company name.
-	vax-* | tahoe-* | i[3456]86-* | i860-* | m32r-* | m68k-* | m68000-* \
+	# FIXME: clean up the formatting here.
+	vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
 	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
 	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
-	      | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
-	      | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* \
-	      | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
-	      | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
+	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+	      | xmp-* | ymp-* \
+	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \
+	      | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \
+	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+	      | clipper-* | orion-* \
 	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
-	      | sparc64-* | mips64-* | mipsel-* \
-	      | mips64el-* | mips64orion-* | mips64orionel-*  \
-	      | mipstx39-* | mipstx39el-* \
-	      | f301-*)
+	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+	      | mips64el-* | mips64orion-* | mips64orionel-* \
+	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+	      | mipstx39-* | mipstx39el-* | mcore-* \
+	      | f301-* | armv*-* | t3e-* \
+	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+	      | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* )
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
 	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
 		basic_machine=m68000-att
 		;;
 	3b*)
 		basic_machine=we32k-att
 		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
 	alliant | fx80)
 		basic_machine=fx80-alliant
 		;;
@@ -221,6 +263,10 @@ case $basic_machine in
 		basic_machine=m68k-apollo
 		os=-sysv
 		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -297,6 +343,10 @@ case $basic_machine in
 	encore | umax | mmax)
 		basic_machine=ns32k-encore
 		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
 	fx2800)
 		basic_machine=i860-alliant
 		;;
@@ -315,6 +365,14 @@ case $basic_machine in
 		basic_machine=h8300-hitachi
 		os=-hms
 		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
 	harris)
 		basic_machine=m88k-harris
 		os=-sysv3
@@ -330,13 +388,30 @@ case $basic_machine in
 		basic_machine=m68k-hp
 		os=-hpux
 		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
 	hp9k2[0-9][0-9] | hp9k31[0-9])
 		basic_machine=m68000-hp
 		;;
 	hp9k3[2-9][0-9])
 		basic_machine=m68k-hp
 		;;
-	hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
 		basic_machine=hppa1.1-hp
 		;;
 	hp9k8[0-9][0-9] | hp8[0-9][0-9])
@@ -345,27 +420,53 @@ case $basic_machine in
 	hppa-next)
 		os=-nextstep3
 		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
-		os=-mvs
 		;;
 # I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i[3456]86v32)
+	i[34567]86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
 		;;
-	i[3456]86v4*)
+	i[34567]86v4*)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv4
 		;;
-	i[3456]86v)
+	i[34567]86v)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv
 		;;
-	i[3456]86sol2)
+	i[34567]86sol2)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-solaris2
 		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	i386-go32 | go32)
+		basic_machine=i386-unknown
+		os=-go32
+		;;
+	i386-mingw32 | mingw32)
+		basic_machine=i386-unknown
+		os=-mingw32
+		;;
+	i386-qnx | qnx)
+		basic_machine=i386-qnx
+		;;
 	iris | iris4d)
 		basic_machine=mips-sgi
 		case $os in
@@ -394,6 +495,10 @@ case $basic_machine in
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
 	mipsel*-linux*)
 		basic_machine=mipsel-unknown
 		os=-linux-gnu
@@ -408,10 +513,30 @@ case $basic_machine in
 	mips3*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
 		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	msdos)
+		basic_machine=i386-unknown
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
 	ncr3000)
 		basic_machine=i486-ncr
 		os=-sysv4
 		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
 	news | news700 | news800 | news900)
 		basic_machine=m68k-sony
 		os=-newsos
@@ -424,6 +549,10 @@ case $basic_machine in
 		basic_machine=mips-sony
 		os=-newsos
 		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
 	next | m*-next )
 		basic_machine=m68k-next
 		case $os in
@@ -449,9 +578,25 @@ case $basic_machine in
 		basic_machine=i960-intel
 		os=-nindy
 		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
 	np1)
 		basic_machine=np1-gould
 		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
 	pa-hitachi)
 		basic_machine=hppa1.1-hitachi
 		os=-hiuxwe2
@@ -469,25 +614,23 @@ case $basic_machine in
         pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
-	pentium | p5)
-		basic_machine=i586-intel
+	pentium | p5 | k5 | k6 | nexen)
+		basic_machine=i586-pc
 		;;
-	pentiumpro | p6)
-		basic_machine=i686-intel
+	pentiumpro | p6 | 6x86)
+		basic_machine=i686-pc
 		;;
-	pentium-* | p5-*)
+	pentiumii | pentium2)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexen-*)
 		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	pentiumpro-* | p6-*)
+	pentiumpro-* | p6-* | 6x86-*)
 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	k5)
-		# We don't have specific support for AMD's K5 yet, so just call it a Pentium
-		basic_machine=i586-amd
-		;;
-	nexen)
-		# We don't have specific support for Nexgen yet, so just call it a Pentium
-		basic_machine=i586-nexgen
+	pentiumii-* | pentium2-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	pn)
 		basic_machine=pn-gould
@@ -507,12 +650,20 @@ case $basic_machine in
 	ps2)
 		basic_machine=i386-ibm
 		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
 	rm[46]00)
 		basic_machine=mips-siemens
 		;;
 	rtpc | rtpc-*)
 		basic_machine=romp-ibm
 		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
 	sequent)
 		basic_machine=i386-sequent
 		;;
@@ -520,6 +671,10 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sparclite-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
 	sps7)
 		basic_machine=m68k-bull
 		os=-sysv2
@@ -527,6 +682,13 @@ case $basic_machine in
 	spur)
 		basic_machine=spur-unknown
 		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
 	sun2)
 		basic_machine=m68000-sun
 		;;
@@ -571,6 +733,10 @@ case $basic_machine in
 		basic_machine=i386-sequent
 		os=-dynix
 		;;
+	t3e)
+		basic_machine=t3e-cray
+		os=-unicos
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -588,6 +754,10 @@ case $basic_machine in
 		basic_machine=a29k-nyu
 		os=-sym1
 		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
 	vaxv)
 		basic_machine=vax-dec
 		os=-sysv
@@ -611,6 +781,14 @@ case $basic_machine in
 		basic_machine=a29k-wrs
 		os=-vxworks
 		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
 	xmp)
 		basic_machine=xmp-cray
 		os=-unicos
@@ -618,6 +796,10 @@ case $basic_machine in
         xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -625,6 +807,15 @@ case $basic_machine in
 
 # Here we handle the default manufacturer of certain CPU types.  It is in
 # some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
 	mips)
 		if [ x$os = x-linux-gnu ]; then
 			basic_machine=mips-unknown
@@ -647,7 +838,7 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sparc)
+	sparc | sparcv9)
 		basic_machine=sparc-sun
 		;;
         cydra)
@@ -659,6 +850,16 @@ case $basic_machine in
 	orion105)
 		basic_machine=clipper-highlevel
 		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	c4x*)
+		basic_machine=c4x-none
+		os=-coff
+		;;
 	*)
 		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
 		exit 1
@@ -712,13 +913,21 @@ case $os in
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
+	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv*)
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -macos* | -mpw* | -magic* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
 	-linux*)
 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
 		;;
@@ -728,6 +937,9 @@ case $os in
 	-sunos6*)
 		os=`echo $os | sed -e 's|sunos6|solaris3|'`
 		;;
+	-opened*)
+		os=-openedition
+		;;
 	-osfrose*)
 		os=-osfrose
 		;;
@@ -743,6 +955,9 @@ case $os in
 	-acis*)
 		os=-aos
 		;;
+	-386bsd)
+		os=-bsd
+		;;
 	-ctix* | -uts*)
 		os=-sysv
 		;;
@@ -762,6 +977,9 @@ case $os in
 	-oss*)
 		os=-sysv3
 		;;
+        -qnx)
+		os=-qnx4
+		;;
 	-svr4)
 		os=-sysv4
 		;;
@@ -774,9 +992,18 @@ case $os in
 	# This must come after -sysvr4.
 	-sysv*)
 		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
 	-xenix)
 		os=-xenix
 		;;
+        -*mint | -*MiNT)
+	        os=-mint
+		;;
 	-none)
 		;;
 	*)
@@ -802,6 +1029,9 @@ case $basic_machine in
 	*-acorn)
 		os=-riscix1.2
 		;;
+	arm*-rebel)
+		os=-linux
+		;;
 	arm*-semi)
 		os=-aout
 		;;
@@ -823,15 +1053,36 @@ case $basic_machine in
 		# default.
 		# os=-sunos4
 		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
 	*-tti)	# must be before sparc entry or we get the wrong os.
 		os=-sysv3
 		;;
 	sparc-* | *-sun)
 		os=-sunos4.1.1
 		;;
+	*-be)
+		os=-beos
+		;;
 	*-ibm)
 		os=-aix
 		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
 	*-hp)
 		os=-hpux
 		;;
@@ -895,6 +1146,18 @@ case $basic_machine in
 	f301-fujitsu)
 		os=-uxpv
 		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
 	*)
 		os=-none
 		;;
@@ -916,9 +1179,15 @@ case $basic_machine in
 			-aix*)
 				vendor=ibm
 				;;
+			-beos*)
+				vendor=be
+				;;
 			-hpux*)
 				vendor=hp
 				;;
+			-mpeix*)
+				vendor=hp
+				;;
 			-hiux*)
 				vendor=hitachi
 				;;
@@ -934,7 +1203,7 @@ case $basic_machine in
 			-genix*)
 				vendor=ns
 				;;
-			-mvs*)
+			-mvs* | -opened*)
 				vendor=ibm
 				;;
 			-ptx*)
@@ -946,6 +1215,15 @@ case $basic_machine in
 			-aux*)
 				vendor=apple
 				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -*MiNT)
+				vendor=atari
+				;;
 		esac
 		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
 		;;

configure.in

@@ -1,21 +1,62 @@
 # Process this file with autoconf to produce a configure script.
 AC_INIT(gdk/gdktypes.h)
 
+# In the following, there are a the following variants
+# of GLib cflags and libs variables
+#
+# GLIB_CFLAGS:  cflags for compiling libraries and example progs
+# GLIB_LIBS:    libraries for linking example programs
+# GLIB_DEPLIBS: libraries for linking libraries against
+# glib_cflags:  cflags to store in gtk-config
+# glib_libs:    libs to store in gtk-config
+# glib_thread_cflags: cflags to store in gtk-config for gtk-config gthread
+# glib_thread_libs:   libs to store in gtk-config for gtk-config gthread
+
 # Save this value here, since automake will set cflags later
 cflags_set=${CFLAGS+set}
 
-GTK_MAJOR_VERSION=0
-GTK_MINOR_VERSION=99
-GTK_MICRO_VERSION=5
+dnl we need to AC_DIVERT_PUSH/AC_DIVERT_POP these variable definitions so they
+dnl are available for $ac_help expansion (don't we all *love* autoconf?)
+AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl
+#
+# Making releases:
+#   GTK_MICRO_VERSION += 1;
+#   GTK_INTERFACE_AGE += 1;
+#   GTK_BINARY_AGE += 1;
+# if any functions have been added, set GTK_INTERFACE_AGE to 0.
+# if backwards compatibility has been broken,
+# set GTK_BINARY_AGE and GTK_INTERFACE_AGE to 0.
+#
+GTK_MAJOR_VERSION=1
+GTK_MINOR_VERSION=2
+GTK_MICRO_VERSION=10
+GTK_INTERFACE_AGE=1
+GTK_BINARY_AGE=10
 GTK_VERSION=$GTK_MAJOR_VERSION.$GTK_MINOR_VERSION.$GTK_MICRO_VERSION
+dnl
+AC_DIVERT_POP()dnl
+
+AC_SUBST(GTK_MAJOR_VERSION)
+AC_SUBST(GTK_MINOR_VERSION)
+AC_SUBST(GTK_MICRO_VERSION)
+AC_SUBST(GTK_INTERFACE_AGE)
+AC_SUBST(GTK_BINARY_AGE)
+AC_SUBST(GTK_VERSION)
+
+# libtool versioning
+LT_RELEASE=$GTK_MAJOR_VERSION.$GTK_MINOR_VERSION
+LT_CURRENT=`expr $GTK_MICRO_VERSION - $GTK_INTERFACE_AGE`
+LT_REVISION=$GTK_INTERFACE_AGE
+LT_AGE=`expr $GTK_BINARY_AGE - $GTK_INTERFACE_AGE`
+AC_SUBST(LT_RELEASE)
+AC_SUBST(LT_CURRENT)
+AC_SUBST(LT_REVISION)
+AC_SUBST(LT_AGE)
 
 # For automake.
 VERSION=$GTK_VERSION
 PACKAGE=gtk+
 
-# Configure glib
-AC_CONFIG_SUBDIRS(glib)
-
 # Save this value here, since automake will set cflags later
 cflags_set=${CFLAGS+set}
 
@@ -33,61 +74,222 @@ AM_MAINTAINER_MODE
 
 AC_CANONICAL_HOST
 
+dnl figure debugging default, prior to $ac_help setup
+dnl
+AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl
+if test `expr $GTK_MINOR_VERSION \% 2` = 1 ; then
+        debug_default=yes
+else
+        debug_default=minimum
+fi
+AC_DIVERT_POP()dnl
+
+dnl declare --enable-* args and collect ac_help strings
+AC_ARG_ENABLE(debug, [  --enable-debug=[no/minimum/yes] turn on debugging [default=$debug_default]],,enable_debug=$debug_default)
 AC_ARG_ENABLE(shm, [  --enable-shm            support shared memory if available [default=yes]],
 		   echo $enable_shm, enable_shm="yes")
-AC_ARG_ENABLE(debug, [  --enable-debug=[no/minimum/yes] turn on debugging [default=minimum]],,enable_debug=minimum)
 AC_ARG_ENABLE(ansi, [  --enable-ansi           turn on strict ansi [default=no]],
 		    , enable_ansi=no)
+AC_ARG_WITH(glib, [  --with-glib=DIR         Use uninstalled copy of glib])
 AC_ARG_ENABLE(xim, [  --enable-xim            support XIM [default=yes]],
-			echo $enable_xim, enable_xim="yes")
+			, enable_xim="yes")
+AC_ARG_ENABLE(xim_inst, [  --disable-xim-inst      does not use xim instantiate callback],
+			, enable_xim_inst="maybe")
+AC_ARG_ENABLE(rebuilds, [  --disable-rebuilds      disable all source autogeneration rules],,enable_rebuilds=yes)
 AC_ARG_WITH(locale, [  --with-locale=LOCALE    locale name you want to use ])
 
 AC_ARG_WITH(xinput, [  --with-xinput=[no/gxi/xfree] support XInput ])
+AC_ARG_WITH(native_locale, [  --with-native-locale=[yes/no] Use native locale support [default=no]],,with_native_locale=no)
 
 if test "x$enable_debug" = "xyes"; then
-  test "$cflags_set" = set || CFLAGS="-g"
-  CFLAGS="$CFLAGS -DG_ENABLE_DEBUG"
+  test "$cflags_set" = set || CFLAGS="$CFLAGS -g"
+  GTK_DEBUG_FLAGS="-DG_ENABLE_DEBUG"
 else
   if test "x$enable_debug" = "xno"; then
-    CFLAGS="$CFLAGS -DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -DGTK_NO_CHECK_CASTS"
+    GTK_DEBUG_FLAGS="-DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -DGTK_NO_CHECK_CASTS"
   else
-    CFLAGS="$CFLAGS -DGTK_NO_CHECK_CASTS"
+    GTK_DEBUG_FLAGS="-DGTK_NO_CHECK_CASTS"
   fi
 fi
 
+AC_DEFINE_UNQUOTED(GTK_COMPILED_WITH_DEBUGGING, "${enable_debug}")
+
 # Build time sanity check...
 AM_SANITY_CHECK
 
 # Checks for programs.
 AC_PROG_CC
+AC_ISC_POSIX
 AM_PROG_CC_STDC
 AC_PROG_INSTALL
 AC_PROG_MAKE_SET
 
+changequote(,)dnl
 if test "x$GCC" = "xyes"; then
-  if test -z "`echo "$CFLAGS" | grep "\-Wall" 2> /dev/null`" ; then
-    CFLAGS="$CFLAGS -Wall"
-  fi
+  case " $CFLAGS " in
+  *[\ \	]-Wall[\ \	]*) ;;
+  *) CFLAGS="$CFLAGS -Wall" ;;
+  esac
 
   if test "x$enable_ansi" = "xyes"; then
-    if test -z "`echo "$CFLAGS" | grep "\-ansi" 2> /dev/null`" ; then
-      CFLAGS="$CFLAGS -ansi"
-    fi
+    case " $CFLAGS " in
+    *[\ \	]-ansi[\ \	]*) ;;
+    *) CFLAGS="$CFLAGS -ansi" ;;
+    esac
 
-    if test -z "`echo "$CFLAGS" | grep "\-pedantic" 2> /dev/null`" ; then
-      CFLAGS="$CFLAGS -pedantic"
-    fi
+    case " $CFLAGS " in
+    *[\ \	]-pedantic[\ \	]*) ;;
+    *) CFLAGS="$CFLAGS -pedantic" ;;
+    esac
   fi
 fi
+changequote([,])dnl
 
-if test "x$enable_xim" = "xyes"; then
-  CFLAGS="$CFLAGS -DUSE_XIM"
+# Honor aclocal flags
+ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"
+
+# define a MAINT-like variable REBUILD which is set if Perl
+# and awk are found, so autogenerated sources can be rebuilt
+
+AC_PROG_AWK
+AC_CHECK_PROGS(PERL, perl5 perl)
+
+# We would like indent, but don't require it.
+AC_CHECK_PROG(INDENT, indent, indent)
+
+REBUILD=\#
+if test "x$enable_rebuilds" = "xyes" && \
+     test -n "$PERL" && \
+     $PERL -e 'exit !($] >= 5.002)' > /dev/null 2>&1 && \
+     test -n "$AWK" ; then
+  REBUILD=
+fi
+AC_SUBST(REBUILD)
+
+AC_MSG_CHECKING(whether make is GNU Make)
+STRIP_BEGIN=
+STRIP_END=
+if $ac_make --version 2>/dev/null | grep '^GNU Make ' >/dev/null ; then
+	STRIP_BEGIN='$(strip $(STRIP_DUMMY)'
+	STRIP_END=')'
+	AC_MSG_RESULT(yes)
+else
+	AC_MSG_RESULT(no)
+fi
+dnl some Make 3.79 $(strip ) versions are broken and require an empty arg
+STRIP_DUMMY=
+AC_SUBST(STRIP_DUMMY)
+AC_SUBST(STRIP_BEGIN)
+AC_SUBST(STRIP_END)
+
+# i18n stuff
+ALL_LINGUAS="az ca cs da de el es et eu fi fr ga gl hr hu it ja ko lt nl no nn pl pt pt_BR ro ru sk sl sp sr sv tr uk vi wa zh_CN.GB2312 zh_TW.Big5"
+AM_GTK_GNU_GETTEXT
+LIBS="$LIBS $INTLLIBS"
+
+# AM_GTK_GNU_GETTEXT above substs $DATADIRNAME
+# this is the directory where the *.{mo,gmo} files are installed
+gtklocaledir='${prefix}/${DATADIRNAME}/locale'
+AC_SUBST(gtklocaledir)
+
+dnl The DU4 header files don't provide library prototypes unless 
+dnl -std1 is given to the native cc.
+AC_MSG_CHECKING([for extra flags to get ANSI library prototypes])
+
+gtk_save_LIBS=$LIBS
+LIBS="$LIBS -lm"
+AC_TRY_RUN([#include <math.h>
+             int main (void) { return (log(1) != log(1.)); }],
+     AC_MSG_RESULT(none needed),
+     gtk_save_CFLAGS=$CFLAGS
+     CFLAGS="$CFLAGS -std1"
+     AC_TRY_RUN([#include <math.h>
+	         int main (void) { return (log(1) != log(1.)); }],
+         AC_MSG_RESULT(-std1),
+         AC_MSG_RESULT()
+         CFLAGS=$gtk_save_CFLAGS
+         AC_MSG_WARN(
+                [No ANSI prototypes found in library. (-std1 didn't work.)]),
+	 true
+     ),
+     AC_MSG_RESULT(none needed)
+)
+LIBS=$gtk_save_LIBS
+
+dnl NeXTStep cc seems to need this
+AC_MSG_CHECKING([for extra flags for POSIX compliance])
+AC_TRY_COMPILE([#include <dirent.h>], [DIR *dir;],
+  AC_MSG_RESULT(none needed),
+  gtk_save_CFLAGS=$CFLAGS
+  CFLAGS="$CFLAGS -posix"
+  AC_TRY_COMPILE([#include <dirent.h>], [DIR *dir;],
+    AC_MSG_RESULT(-posix),
+    AC_MSG_RESULT()
+    CFLAGS=$gtk_save_CFLAGS
+    AC_MSG_WARN([Could not determine POSIX flag. (-posix didn't work.)])))
+
+if test x$with_glib = xyes ; then
+  AC_MSG_ERROR([
+*** Directory must be specified for --with-glib])
 fi
 
-AC_DEFINE_UNQUOTED(GTK_MAJOR_VERSION, $GTK_MAJOR_VERSION)
-AC_DEFINE_UNQUOTED(GTK_MINOR_VERSION, $GTK_MINOR_VERSION)
-AC_DEFINE_UNQUOTED(GTK_MICRO_VERSION, $GTK_MICRO_VERSION)
-AC_DEFINE_UNQUOTED(GTK_VERSION, "$GTK_VERSION")
+if test x$with_glib = x ; then 
+  # Look for separately installed glib
+
+  AM_PATH_GLIB(1.2.8,,
+    AC_MSG_ERROR([
+*** GLIB 1.2.8 or better is required. The latest version of GLIB
+*** is always available from ftp://ftp.gtk.org/.]),
+    gmodule gthread)
+
+  # we do not want to make all gtk progs to link to thread libraries.
+  glib_cflags=`$GLIB_CONFIG glib gmodule --cflags`
+  glib_thread_cflags="$GLIB_CFLAGS"
+  glib_libs=`$GLIB_CONFIG glib gmodule --libs`
+  glib_thread_libs="$GLIB_LIBS"
+  GLIB_LIBS="$glib_libs"
+  GLIB_DEPLIBS="$glib_libs"
+else
+  # Use uninstalled glib (assume they got the version right)
+
+  GLIB_CONFIG=$with_glib/glib-config
+  if test -x $GLIB_CONFIG ; then 
+    :
+  else
+    AC_MSG_ERROR([GLIB directory ($with_glib) not present or not configured])
+  fi
+
+  # For use in gtk-config
+  glib_cflags=`$GLIB_CONFIG --cflags gmodule`
+  glib_thread_cflags=`$GLIB_CONFIG --cflags gmodule gthread`
+  glib_libs=`$GLIB_CONFIG --libs gmodule`
+  glib_thread_libs=`$GLIB_CONFIG --libs gmodule gthread`
+
+  glib_release=`$GLIB_CONFIG --version | sed 's%\\.[[0-9]]*$%%'`
+
+  # canonicalize relative paths
+  case $with_glib in 
+    /*)
+      glib_dir=$with_glib
+      ;;
+    *)
+      glib_dir="\$(top_builddir)/$with_glib"
+      ;;
+  esac
+
+  GLIB_CFLAGS="-I$glib_dir -I$glib_dir/gmodule"
+  GLIB_LIBS="$glib_dir/libglib.la $glib_dir/gmodule/libgmodule.la"
+  GLIB_DEPLIBS=
+
+  AC_SUBST(GLIB_CFLAGS)
+  AC_SUBST(GLIB_LIBS)
+fi
+
+AC_SUBST(glib_cflags)
+AC_SUBST(glib_libs)
+AC_SUBST(glib_thread_cflags)
+AC_SUBST(glib_thread_libs)
+AC_SUBST(GLIB_DEPLIBS)
 
 # Find the X11 include and library directories
 AC_PATH_X
@@ -100,16 +302,76 @@ fi
 saved_cflags="$CFLAGS"
 saved_ldflags="$LDFLAGS"
 
-CFLAGS="$X_CFLAGS"
-LDFLAGS="$X_LDFLAGS $X_LIBS"
+CFLAGS="$CFLAGS $X_CFLAGS"
+LDFLAGS="$LDFLAGS $X_LDFLAGS $X_LIBS"
+
+if test "x$no_x" = "xyes"; then 
+  AC_MSG_ERROR([
+*** X libraries or include files not found. Check 'config.log' for 
+*** more details.])
+fi
 
 # Checks for libraries.
 # Check for the X11 library
-AC_CHECK_LIB(X11, XOpenDisplay, x_libs="-lX11 $X_EXTRA_LIBS", no_x11_lib=yes, $X_EXTRA_LIBS)
+AC_CHECK_LIB(X11, XOpenDisplay, x_libs="-lX11 $X_EXTRA_LIBS", 
+  AC_MSG_ERROR([*** libX11 not found. Check 'config.log' for more details.]),
+  $X_EXTRA_LIBS)
 
 if test "x$enable_shm" = "xyes"; then
   # Check for the Xext library (needed for XShm extention)
-  AC_CHECK_LIB(Xext, XShmAttach, x_libs="-lXext $x_libs", no_xext_lib=yes, $x_libs)
+  AC_CHECK_LIB(Xext, XShmAttach, 
+      x_libs="-lXext $x_libs", 
+      # On AIX, it is in XextSam instead, but we still need -lXext
+      AC_CHECK_LIB(XextSam, XShmAttach, 
+          x_libs="-lXextSam -lXext $x_libs", 
+          no_xext_lib=yes, $x_libs),
+      $x_libs)
+fi
+
+# Check for shaped window extension
+
+AC_CHECK_LIB(Xext, XShapeCombineMask,
+      if test -z "`echo $x_libs | grep "\-lXext" 2> /dev/null`"; then
+           x_libs="-lXext $x_libs"
+      fi
+      AC_DEFINE(HAVE_SHAPE_EXT),
+      ,
+      $x_libs)
+
+# Check for XConvertCase (X11R6 specific)
+
+AC_CHECK_LIB(X11, XConvertCase,
+      AC_DEFINE(HAVE_XCONVERTCASE),
+      ,
+      $x_libs)
+
+# Check for XIM support.
+
+AC_CHECK_LIB(X11, XUnregisterIMInstantiateCallback,
+	    : ,
+	    enable_xim_inst="no",
+	    $x_libs)
+
+# On Solaris, calling XRegisterIMInstantiateCallback seems to
+# cause an immediate segfault, so we disable it, unless
+# the user specifically forces it to be on.
+
+if test x$enable_xim_inst = xmaybe ; then
+  case host in
+	*-*-solaris*)
+            enable_xim_inst="no"
+            ;;
+	*)
+	    enable_xim_inst="yes"
+	    ;;
+  esac
+fi
+
+if test "x$enable_xim" = "xyes"; then
+  GTK_XIM_FLAGS="-DUSE_XIM"
+  if test "x$enable_xim_inst" = "xyes"; then
+    AC_DEFINE(USE_X11R6_XIM)
+  fi
 fi
 
 x_cflags="$X_CFLAGS"
@@ -117,17 +379,22 @@ x_ldflags="$X_LDFLAGS $X_LIBS"
 
 # set up things for XInput
 
-if test "x$with_xinput" = "xgxi" || test "x$with_xinput" = "xyes"; then
+if test "x$with_xinput" = "xgxi"; then
+  AC_MSG_WARN([
+*** The generic XInput support has not been tested for several years
+*** and is not known to work with any currently available X servers])
   AC_DEFINE(XINPUT_GXI)
   xinput_progs=gxid
   x_libs="-lXi $x_libs"
-elif test "x$with_xinput" = "xxfree"; then
+elif test "x$with_xinput" = "xxfree" || test "x$with_xinput" = "xyes"; then
   AC_DEFINE(XINPUT_XFREE)
   x_libs="-lXi $x_libs"
 else
   AC_DEFINE(XINPUT_NONE)
 fi
 
+CFLAGS="$saved_cflags"
+LDFLAGS="$saved_ldflags"
 
 AC_SUBST(x_cflags)
 AC_SUBST(x_includes)
@@ -135,46 +402,11 @@ AC_SUBST(x_ldflags)
 AC_SUBST(x_libs)
 AC_SUBST(xinput_progs)
 
-CFLAGS="$saved_cflags"
-LDFLAGS="$saved_ldflags"
-
 if test "x$enable_shm" = "xyes"; then
   # Check for shared memory
   AC_CHECK_HEADER(sys/ipc.h, AC_DEFINE(HAVE_IPC_H), no_sys_ipc=yes)
   AC_CHECK_HEADER(sys/shm.h, AC_DEFINE(HAVE_SHM_H), no_sys_shm=yes)
 
-  # Check whether shmctl IPC_RMID allowes subsequent attaches
-  if test "$ac_cv_header_sys_shm_h" = "yes"; then
-    AC_MSG_CHECKING(whether shmctl IPC_RMID allowes subsequent attaches)
-    AC_TRY_RUN([
-          #include <sys/types.h>
-          #include <sys/ipc.h>
-          #include <sys/shm.h>
-          int main()
-          {
-            int id;
-            char *shmaddr;
-          id = shmget (IPC_PRIVATE, 4, IPC_CREAT | 0777);
-          if (id == -1)
-            exit (2);
-            shmaddr = shmat (id, 0, 0);
-            shmctl (id, IPC_RMID, 0);
-            if ((char*) shmat (id, 0, 0) == (char*) -1)
-            {
-              shmdt (shmaddr);
-              exit (1);
-            }
-            shmdt (shmaddr);
-            shmdt (shmaddr);
-            exit (0);
-          }
-      ],
-      AC_DEFINE(IPC_RMID_DEFERRED_RELEASE)
-        AC_MSG_RESULT(yes),
-      AC_MSG_RESULT(no),
-      AC_MSG_RESULT(assuming no))
-  fi
-
   # Check for the X shared memory extension header file
   AC_MSG_CHECKING(X11/extensions/XShm.h)
   if test "x$no_xext_lib" = "xyes"; then
@@ -191,27 +423,6 @@ if test "x$enable_shm" = "xyes"; then
   fi
 fi
 
-# Check for private display resource base variable
-AC_MSG_CHECKING(resource base field in XDisplay)
-AC_CACHE_VAL(gtk_cv_display_resource_base,
-[AC_TRY_RUN([
-#define XLIB_ILLEGAL_ACCESS
-#include <X11/Xlib.h>
-
-int
-main ()
-{
-  Display *display;
-
-  return 0;
-
-  display->resource_base;
-}],
-gtk_cv_display_resource_base="resource_base",
-gtk_cv_display_resource_base="private3")])
-AC_MSG_RESULT($gtk_cv_display_resource_base)
-AC_DEFINE_UNQUOTED(RESOURCE_BASE, gdk_display->$gtk_cv_display_resource_base)
-
 # Check if X_LOCALE definition is necessary
 
 AC_MSG_CHECKING(need -DX_LOCALE)
@@ -226,11 +437,45 @@ main ()
   return setlocale (LC_ALL, "${with_locale}") == NULL;
 }],
 need_x_locale=no,
-need_x_locale=yes)
+need_x_locale=yes,
+need_x_locale=no)
 AC_MSG_RESULT($need_x_locale)
 
+use_native_locale=no
 if test $need_x_locale = yes; then
-  CFLAGS="$CFLAGS -DX_LOCALE"
+  GTK_LOCALE_FLAGS="-DX_LOCALE"
+else
+  if test x$with_native_locale = xyes ; then
+    AC_MSG_CHECKING(functioning locale support)
+  
+    AC_TRY_COMPILE([#include <stdlib.h>],[
+          char c;
+          if (MB_CUR_MAX == 1) {
+              wctomb(&c, 42);
+          }
+    ],use_native_locale=yes,)
+
+    AC_MSG_RESULT($use_native_locale)
+  fi
+fi
+
+if test x$use_native_locale = xyes ; then
+  AC_MSG_CHECKING(if sizeof(wchar_t) == 4)
+
+  AC_TRY_RUN([
+  #include <stdlib.h>
+
+  int
+  main ()
+  {
+    return (sizeof(wchar_t) == 4) ? 0 : 1;
+  }],
+  ,use_native_locale=no,:)
+  AC_MSG_RESULT($use_native_locale)
+fi
+
+if test $use_native_locale = yes ; then 
+  AC_DEFINE(USE_NATIVE_LOCALE)
 fi
 
 # Checks for header files.
@@ -238,26 +483,93 @@ AC_HEADER_STDC
 
 # Checks for typedefs, structures, and compiler characteristics.
 AC_C_CONST
-AC_C_INLINE
 
 # Checks for library functions.
 AC_TYPE_SIGNAL
 AC_FUNC_MMAP
 
-# Check for sys/select.h
+AC_CHECK_FUNCS(getresuid)
+AC_TYPE_UID_T
 
-AC_MSG_CHECKING([fd_set and sys/select])
+# Check if <sys/select.h> needs to be included for fd_set
+AC_MSG_CHECKING([for fd_set])
 AC_TRY_COMPILE([#include <sys/types.h>],
         [fd_set readMask, writeMask;], gtk_ok=yes, gtk_ok=no)
-if test $gtk_ok = no; then
+if test $gtk_ok = yes; then
+    AC_MSG_RESULT([yes, found in sys/types.h])
+else
     AC_HEADER_EGREP(fd_mask, sys/select.h, gtk_ok=yes)
     if test $gtk_ok = yes; then
         AC_DEFINE(HAVE_SYS_SELECT_H)
+        AC_MSG_RESULT([yes, found in sys/select.h])
+    else
+	AC_DEFINE(NO_FD_SET)
+	AC_MSG_RESULT(no)
     fi
 fi
-AC_MSG_RESULT($gtk_ok)
-if test $gtk_ok = no; then
-    AC_DEFINE(NO_FD_SET)
-fi
 
-AC_OUTPUT(Makefile gtk+.xconfig docs/Makefile gdk/Makefile gtk/Makefile)
+# Duplicate `widechar' tests from `glib'.
+# Check for wchar.h
+AC_MSG_CHECKING(for wchar.h)
+AC_TRY_CPP([#include <wchar.h>], gtk_ok=yes, gtk_ok=no)
+if test $gtk_ok = yes; then
+   AC_DEFINE(HAVE_WCHAR_H,1,[Define if wchar.h exists])
+fi
+AC_MSG_RESULT($gtk_ok)
+
+# Check for wctype.h (for iswalnum)
+AC_MSG_CHECKING(for wctype.h)
+AC_TRY_CPP([#include <wctype.h>], gtk_ok=yes, gtk_ok=no)
+if test $gtk_ok = yes; then
+   AC_DEFINE(HAVE_WCTYPE_H,1,[Define if wctype.h exists])
+fi
+AC_MSG_RESULT($gtk_ok)
+
+# in Solaris 2.5, `iswalnum' is in -lw
+GDK_WLIBS=
+AC_CHECK_FUNC(iswalnum,,[AC_CHECK_LIB(w,iswalnum,GDK_WLIBS=-lw)])
+
+# The following is necessary for Linux libc-5.4.38
+oLIBS="$LIBS"
+LIBS="$LIBS $GDK_WLIBS"
+AC_MSG_CHECKING(if iswalnum() and friends are properly defined)
+AC_TRY_LINK([#include <stdlib.h>],[
+#if (defined(HAVE_WCTYPE_H) || defined(HAVE_WCHAR_H))
+#  ifdef HAVE_WCTYPE_H
+#    include <wctype.h>
+#  else
+#    ifdef HAVE_WCHAR_H
+#      include <wchar.h>
+#    endif
+#  endif
+#else
+#  define iswalnum(c) ((wchar_t)(c) <= 0xFF && isalnum(c))
+#endif
+iswalnum((wchar_t) 0);
+], gtk_ok=yes, gtk_ok=no)
+LIBS="$oLIBS"
+
+if test $gtk_ok = no; then
+   AC_DEFINE(HAVE_BROKEN_WCTYPE,1,[Define if the wctype function is broken])
+   GDK_WLIBS=
+fi
+AC_MSG_RESULT($gtk_ok)
+AC_SUBST(GDK_WLIBS)
+
+AC_SUBST(GTK_DEBUG_FLAGS)
+AC_SUBST(GTK_XIM_FLAGS)
+AC_SUBST(GTK_LOCALE_FLAGS)
+
+AC_OUTPUT([
+gtk+.spec
+docs/gtk-config.1
+Makefile
+gtk-config
+po/Makefile.in
+docs/Makefile
+gdk/Makefile
+gtk/Makefile
+gtk/gtkfeatures.h
+gdk.pc
+gtk+.pc
+], [chmod +x gtk-config])

debian/README.debian

@@ -0,0 +1,18 @@
+libgtk1 for Debian
+----------------------
+
+The GIMP Tool Kit (gtk) is a set of widgets to help you program
+programs for the X Windowing System easily and powerfully.
+
+gtk is the moving force behind The GNU Image Manipulation Program (The
+GIMP) -- the number one freely-available image editing and creation
+program available. 
+
+gtk is rapidly under development, and the source tree has officially
+been separated from The GIMP now, as other teams of programmers
+are beginning to write software using its great widget set -- like
+GNOME, a desktop interface for X, and gzilla, a freely available
+web browser for X.
+
+Ben Gertzfield <che@debian.org>, Mon, 29 Sep 1997 13:11:45 -0700
+

debian/build

@@ -0,0 +1,62 @@
+#!/usr/bin/perl -w
+
+				# Adjust debian/changelog and build a new
+				# Debian package of a CVS archive.
+
+				# Written 17 November 1998 by Ben Gertzfield
+				# <che@debian.org>
+
+				# This work is released under the GNU
+				# General Public License, version 2 or
+				# later.
+
+use strict;
+use diagnostics;
+use File::Copy;
+
+my $maintainer = 'Ben Gertzfield <che@debian.org>';
+
+my @date = localtime;
+
+my $datestr = sprintf("%d%.2d%.2d", $date[5] + 1900, $date[4] + 1, $date[3]);
+my $revision = '01';
+
+open (CHANGELOG, 'debian/changelog') or die "Couldn't open debian/changelog: $!\n";
+
+$_ = <CHANGELOG>;
+chomp;
+
+close CHANGELOG;
+
+my ($package, $last_date, $last_revision) = /^(.*?) \((.*?)\.(.*)?\)/;
+
+if ($last_date eq $datestr) {
+  $revision = sprintf("%.2d", $last_revision + 1);
+}
+
+my $new_version = "$datestr.$revision";
+
+copy('debian/changelog', 'debian/changelog.old') or die "Couldn't copy debian/changelog to debian/changelog.old: $!\n";
+
+open(NEWCHANGELOG, ">debian/changelog") or die "Couldn't open debian/changelog for writing: $!\n";
+
+print NEWCHANGELOG "$package ($new_version) unstable; urgency=low\n\n  * CVS snapshot build at " . scalar localtime() . "\n\n -- $maintainer  " . `date -R` . "\n";
+
+open(OLDCHANGELOG, "debian/changelog.old") or die "Couldn't open debian/changelog.old: $!\n";
+
+while (<OLDCHANGELOG>) {
+  print NEWCHANGELOG;
+}
+
+close OLDCHANGELOG;
+close NEWCHANGELOG;
+
+unlink('debian/changelog.old') or die "Couldn't unlink debian/changelog.old: $!\n";
+
+open(NEWVERSION, '>debian/version') or die "Couldn't open debian/version for writing: $!\n";
+print NEWVERSION "$new_version\n";
+close NEWVERSION;
+
+system('dpkg-buildpackage -b -rfakeroot -us -uc');
+unlink 'debian/version' or die "Couldn't unlink debian/version: $!\n";
+

debian/changelog

@@ -0,0 +1,10 @@
+gtk+-cvs (19981116.01) unstable; urgency=low
+
+  * First test build from CVS
+
+ -- Ben Gertzfield <che@debian.org>  Tue, 17 Nov 1998 12:02:13 -0800
+
+Local variables:
+mode: debian-changelog
+add-log-mailing-address: "che@debian.org"
+End:

debian/control

@@ -0,0 +1,81 @@
+Source: gtk+-cvs
+Priority: extra
+Section: libs
+Maintainer: Ben Gertzfield <che@debian.org>
+Standards-Version: 2.4.0.0
+
+Package: libgtk-cvs-1.1
+Architecture: any
+Section: libs
+Depends: ${shlibs:Depends}
+Conflicts: libgtk-dev (<< 1:1.0.2), libgtk1.1
+Description: CVS build of the GIMP Toolkit set of widgets for X
+ **THIS IS NOT AN OFFICIAL DEBIAN PACKAGE! THIS IS AN AUTOMATED CVS
+   BUILD OF THE GTK+ LIBRARIES! BEWARE! IT MAY NOT WORK!**
+ . 
+ The GIMP Toolkit is a freely available set of widgets for X.
+ GTK is easy to use, and has been implemented in such projects as
+ The GNU Image Manipulation Program (The GIMP), GNOME, a GNU
+ desktop set of utilities for X, and gzilla, a GNU web-browser.
+ .
+ This is the unstable 1.1 branch of GTK. It is not intended for use
+ with stable projects!
+
+Package: libgtk-cvs-dev
+Architecture: any
+Section: devel
+Depends: libgtk-cvs-1.1 (=${Source-Version}), libglib-cvs-dev
+Suggests: libgtk-cvs-doc
+Provides: libgtk1.1-dev
+Replaces: libgtk1.1-dev
+Conflicts: libgtk-dev, libgtk1 (<< 1:1.0.4), libgtk1.1-dev
+Description: CVS build of development files for the GIMP Toolkit
+ **THIS IS NOT AN OFFICIAL DEBIAN PACKAGE! THIS IS AN AUTOMATED CVS
+   BUILD OF THE GTK+ LIBRARIES! BEWARE! IT MAY NOT WORK!**
+ .
+ This package contains the header files and static libraries for the
+ GIMP Toolkit set of widgets for X. 
+ .
+ This is the unstable, 1.1 branch of GTK+. This is not intended for
+ use with stable releases of programs! 
+ .
+ Install this package if you wish to develop your own X programs using
+ the GIMP Toolkit 1.1, or if you wish to compile your own plug-ins for
+ The GIMP.
+
+Package: libgtk-cvs-doc
+Architecture: all
+Section: doc
+Conflicts: libgtk-dev (<< 1:0.99.4), libgtk-doc, libgtk1.1-doc
+Description: CVS build of documentation for the GIMP Toolkit
+ **THIS IS NOT AN OFFICIAL DEBIAN PACKAGE! THIS IS AN AUTOMATED CVS
+   BUILD OF THE GTK+ LIBRARIES! BEWARE! IT MAY NOT WORK!**
+ .
+ This package contains lots of info-files, HTML docs, FAQs, and
+ other handy documentation about the GIMP Toolkit set of widgets
+ for X. 
+ .
+ This package documents the unstable 1.1 release of the GIMP Toolkit.
+ . 
+ Install this package if you want to have lots of info about the
+ GIMP toolkit when you're programming.
+
+Package: libgtk-cvs-dbg
+Architecture: any
+Section: devel
+Depends: libgtk-cvs-1.1 (= ${Source-Version}), libgtk-cvs-dev (= ${Source-Version})
+Suggests: libgtk-cvs-doc
+Conflicts: libgtk1.1-dbg
+Description: CVS build of debugging files for the GIMP Toolkit
+ **THIS IS NOT AN OFFICIAL DEBIAN PACKAGE! THIS IS AN AUTOMATED CVS
+   BUILD OF THE GTK+ LIBRARIES! BEWARE! IT MAY NOT WORK!**
+ .
+ This package contains the debugging static libraries for the
+ GIMP Toolkit set of widgets for X. 
+ .
+ This is the unstable, 1.1 branch of GTK+. This is not intended for
+ use with stable releases of programs! 
+ .
+ Install this package if you wish to debug your own X programs using
+ the GIMP Toolkit 1.1, or if you wish to debug your own plug-ins for
+ The GIMP.

debian/copyright

@@ -0,0 +1,8 @@
+This package was debianized by Ben Gertzfield <che@debian.org> on
+Tue, 17 Nov 1998 12:07:17 -0800
+
+It was produced from the CVS repository at cvs.gimp.org.
+
+It may be redistributed under the terms of the GNU LGPL, Version 2 or
+later, found on Debian systems in the file /usr/doc/copyright/LGPL.
+

debian/libgtk-cvs-dev.files

@@ -0,0 +1,9 @@
+usr/lib/libgdk.so
+usr/lib/libgdk.a
+usr/lib/libgtk.so
+usr/lib/libgtk.a
+usr/include/gdk/
+usr/include/gtk/
+usr/bin/gtk-config
+usr/man/man1/gtk-config.1
+usr/share/aclocal/gtk.m4

debian/libgtk-cvs-dev.postinst

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+set -e
+
+#DEBHELPER#

debian/libgtk-cvs-dev.prerm

@@ -0,0 +1,6 @@
+#!/bin/sh
+
+set -e
+install-info --quiet --remove gtk
+
+#DEBHELPER#

debian/libgtk-cvs-doc.files

@@ -0,0 +1,8 @@
+usr/info/gdk.info
+usr/info/gtk.info
+usr/info/gtk.info-1
+usr/info/gtk.info-2
+usr/info/gtk.info-3
+usr/info/gtk.info-4
+usr/info/gtk.info-5
+

debian/libgtk-cvs-doc.postinst

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+set -e
+
+install-info --quiet --description="The GIMP Toolkit." \
+ --section "The GIMP" "The GIMP" /usr/info/gtk.info.gz
+
+install-info --quiet --description="The GIMP Drawing Kit." \
+ --section "The GIMP" "The GIMP" /usr/info/gdk.info.gz
+
+#DEBHELPER#

debian/libgtk-cvs-doc.prerm

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+set -e
+install-info --quiet --remove gtk
+install-info --quiet --remove gdk
+
+#DEBHELPER#

debian/postinst

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+set -e
+
+ldconfig
+
+#DEBHELPER#

debian/rules

@@ -0,0 +1,160 @@
+#!/usr/bin/make -f
+
+# debian/rules file for gtk+ Debian package
+# written April 1998 by Ben Gertzfield <che@debian.org
+
+build: build-stamp
+build-stamp:
+	dh_testdir
+	./autogen.sh --prefix=/usr --with-xinput=xfree
+	$(MAKE)
+	cd docs && make distdocs
+	cd ..
+	touch build-stamp
+
+build-dbg: build-dbg-stamp
+build-dbg-stamp:
+	dh_testdir
+	./configure --prefix=/usr --with-xinput=xfree --enable-debug=yes
+	$(MAKE)
+	touch build-dbg-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp build-dbg-stamp install-stamp install-dbg-stamp
+	# Add here commands to clean up after the build process.
+	-$(MAKE) clean
+	cd docs 
+	-$(MAKE) maintainer-clean
+	cd ..
+	-$(MAKE) distclean
+	find . -name '*.o' -o -name '_libs' -o -name '*.lo' -o -name '*.a' -o -name '.deps' | xargs rm -rf
+	dh_clean
+
+clean-dbg:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp build-dbg-stamp install-stamp install-dbg-stamp
+	# Add here commands to clean up after the build process.
+	-$(MAKE) clean
+	cd docs
+	-$(MAKE) maintainer-clean
+	cd ..
+	-$(MAKE) distclean
+	find . -name '*.o' -o -name '_libs' -o -name '*.lo' -o -name '*.a' -o -name '.deps' | xargs rm -rf
+	dh_clean -k
+
+install: install-stamp
+install-stamp: build
+	dh_testdir
+	dh_testroot
+	dh_clean
+	$(MAKE) prefix=`pwd`/debian/tmp/usr install
+	touch install-stamp
+
+install-dbg: install-dbg-stamp
+install-dbg-stamp: build-dbg
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	$(MAKE) prefix=`pwd`/debian/libgtk-cvs-dbg/usr install
+	touch install-dbg-stamp
+
+# Build architecture-independent files here.
+binary-indep: build install libgtk-cvs-doc
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install libgtk-cvs-dev libgtk-cvs-1.1 libgtk-cvs-dbg
+
+libgtk-cvs-1.1: build
+	dh_testdir -plibgtk-cvs-1.1 
+	dh_testroot -plibgtk-cvs-1.1
+	dh_installdirs -plibgtk-cvs-1.1
+	# Add here commands to install the files into debian/tmp
+	rm -rf debian/tmp/usr/bin debian/tmp/usr/include debian/tmp/usr/info debian/tmp/usr/lib/glib debian/tmp/usr/share/aclocal debian/tmp/usr/man debian/tmp/usr/lib/*.la
+	dh_installdocs -plibgtk-cvs-1.1
+	dh_installchangelogs -plibgtk-cvs-1.1
+	dh_strip -plibgtk-cvs-1.1
+	dh_compress -plibgtk-cvs-1.1
+	dh_fixperms -plibgtk-cvs-1.1
+	dh_installdeb -plibgtk-cvs-1.1
+	dh_shlibdeps -plibgtk-cvs-1.1
+	dh_gencontrol -plibgtk-cvs-1.1
+	dh_makeshlibs -plibgtk-cvs-1.1 -V 'libgtk-cvs-1.1 (='`cat debian/version`')'
+	dh_md5sums -plibgtk-cvs-1.1
+	dh_builddeb -plibgtk-cvs-1.1
+
+libgtk-cvs-dev: build
+	dh_testdir -plibgtk-cvs-dev
+	dh_testroot -plibgtk-cvs-dev
+	dh_clean -plibgtk-cvs-dev -k
+	dh_installdirs -plibgtk-cvs-dev
+	# Add here commands to install the files into debian/tmp
+	dh_movefiles -plibgtk-cvs-dev
+	cp gtk-config debian/tmp/usr/bin
+	dh_installdocs -plibgtk-cvs-dev 
+	dh_installchangelogs -plibgtk-cvs-dev
+	dh_strip -plibgtk-cvs-dev
+	dh_compress -plibgtk-cvs-dev
+	dh_fixperms -plibgtk-cvs-dev
+	dh_installdeb -plibgtk-cvs-dev
+	dh_shlibdeps -plibgtk-cvs-dev
+	dh_gencontrol -plibgtk-cvs-dev
+	dh_md5sums -plibgtk-cvs-dev
+	dh_builddeb -plibgtk-cvs-dev
+
+libgtk-cvs-doc:
+	dh_testdir -plibgtk-cvs-doc
+	dh_testroot -plibgtk-cvs-doc
+	dh_clean -plibgtk-cvs-doc -k
+	dh_installdirs -plibgtk-cvs-doc usr/doc/libgtk-cvs-doc/faq-html \
+	  usr/doc/libgtk-cvs-doc/tutorial-html usr/doc/libgtk-cvs-doc/italian-tutorial-html usr/doc/libgtk-cvs-doc/french-tutorial-html usr/doc/libgtk-cvs-doc/gdk-html
+	dh_movefiles -plibgtk-cvs-doc
+	cp docs/html/gtkfaq*.html debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/faq-html
+	cp docs/html/gtk_tut-*.html debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/tutorial-html
+	cp docs/html/*.gif debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/tutorial-html
+	cp docs/html/gtk_tut.html debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/tutorial-html
+	cp docs/html/gtk_tut_it*.html debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/italian-tutorial-html
+	cp docs/html/*.gif debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/italian-tutorial-html
+	cp docs/html/gtk_tut_fr*.html debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/french-tutorial-html
+	cp docs/html/*.gif debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/french-tutorial-html
+	cp docs/html/gdk* debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/gdk-html
+	cp docs/text/*.txt debian/libgtk-cvs-doc/usr/doc/libgtk-cvs-doc/
+
+	dh_installdocs -plibgtk-cvs-doc docs/{debugging,developers,styles,text_widget,widget_system,gtk-config,refcounting}.txt TODO NEWS
+	dh_installchangelogs -plibgtk-cvs-doc
+	dh_strip -plibgtk-cvs-doc
+	dh_compress -plibgtk-cvs-doc
+	dh_fixperms -plibgtk-cvs-doc
+	dh_installdeb -plibgtk-cvs-doc
+	dh_shlibdeps -plibgtk-cvs-doc
+	dh_gencontrol -plibgtk-cvs-doc
+	dh_md5sums -plibgtk-cvs-doc
+	dh_builddeb -plibgtk-cvs-doc
+
+libgtk-cvs-dbg: clean-dbg install-dbg
+	dh_testdir -plibgtk-cvs-dbg
+	dh_testroot -plibgtk-cvs-dbg
+	dh_installdirs -plibgtk-cvs-dbg
+	# Add here commands to install the files into debian/libgtk-cvs-dbg
+	rm -rf debian/libgtk-cvs-dbg/usr/bin debian/libgtk-cvs-dbg/usr/include debian/libgtk-cvs-dbg/usr/info debian/libgtk-cvs-dbg/usr/lib/glib debian/libgtk-cvs-dbg/usr/man debian/libgtk-cvs-dbg/usr/share debian/libgtk-cvs-dbg/usr/lib/*.{la,so*}
+	for file in `find debian/libgtk-cvs-dbg/usr/lib -name '*.a'` ; do \
+	  mv $$file debian/libgtk-cvs-dbg/usr/lib/`basename $$file .a`_g.a; \
+        done
+	dh_installdocs -plibgtk-cvs-dbg
+	dh_installchangelogs -plibgtk-cvs-dbg
+	dh_compress -plibgtk-cvs-dbg
+	dh_fixperms -plibgtk-cvs-dbg
+	dh_installdeb -plibgtk-cvs-dbg
+	dh_shlibdeps -plibgtk-cvs-dbg
+	dh_gencontrol -plibgtk-cvs-dbg
+	dh_md5sums -plibgtk-cvs-dbg
+	dh_builddeb -plibgtk-cvs-dbg
+
+source diff:                                                                  
+	@echo >&2 'source and diff are obsolete - use dpkg-source -b'; false
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary

docs/.cvsignore

@@ -1,5 +1,6 @@
 Makefile
 Makefile.in
+*.html
 *.info*
 *.dvi
 *.ps
@@ -15,3 +16,6 @@ Makefile.in
 *.cps
 *.fns
 *.vrs
+html
+text
+gtk-config.1

docs/Changes-1.2.txt

@@ -0,0 +1,274 @@
+Incompatible Changes from GTK+-1.0 to GTK+-1.2:
+
+* GtkAcceleratorTable has been replaced with GtkAccelGroup
+
+* GtkMenuFactory has been replaced with GtkItemFactory, although
+  a version of GtkMenuFactory is currently still provided to ease
+  the migration phase.
+
+* The GtkTypeInfo structures used in the gtk_*_type_init() functions have
+  changed a bit, the old format:  
+      GtkTypeInfo bin_info =
+      {
+        "GtkBin",
+        sizeof (GtkBin),
+        sizeof (GtkBinClass),
+        (GtkClassInitFunc) gtk_bin_class_init,
+        (GtkObjectInitFunc) gtk_bin_init,
+        (GtkArgSetFunc) NULL,
+        (GtkArgGetFunc) NULL,
+      };
+
+  needs to be converted to:
+
+      static const GtkTypeInfo bin_info =
+      {
+        "GtkBin",
+        sizeof (GtkBin),
+        sizeof (GtkBinClass),
+        (GtkClassInitFunc) gtk_bin_class_init,
+        (GtkObjectInitFunc) gtk_bin_init,
+        /* reserved_1 */ NULL,
+        /* reserved_2 */ NULL,
+        (GtkClassInitFunc) NULL,
+      };
+
+  the GtkArgSetFunc and GtkArgGetFunc functions are not supported from the
+  type system anymore, and you should make sure that your code only fills
+  in these fields with NULL and doesn't use the deprecated function typedefs
+  (GtkArgSetFunc) and (GtkArgGetFunc) anymore.
+
+* A number of Gtk functions were renamed. For compatibility, gtkcompat.h
+  #define's the old 1.0.x function names in terms of the new names.
+  To assure your Gtk program doesn't rely on outdated function
+  variants, compile your program with -DGTK_DISABLE_COMPAT_H to disable
+  the compatibility aliases.
+
+  Here is the list of the old names and replacements:
+
+  Old:				      Replacement:
+
+  gtk_accel_label_accelerator_width   gtk_accel_label_get_accel_width
+  gtk_check_menu_item_set_state	      gtk_check_menu_item_set_active
+  gtk_container_border_width	      gtk_container_set_border_width
+  gtk_label_set  	              gtk_label_set_text
+  gtk_notebook_current_page           gtk_notebook_get_current_page
+  gtk_packer_configure                gtk_packer_set_child_packing
+  gtk_paned_gutter_size	              gtk_paned_set_gutter_size
+  gtk_paned_handle_size		      gtk_paned_set_handle_size
+  gtk_scale_value_width               gtk_scale_get_value_width
+  gtk_style_apply_default_pixmap      gtk_style_apply_default_background (1)
+  gtk_toggle_button_set_state         gtk_toggle_button_set_active
+  gtk_window_position		      gtk_window_set_position
+ 
+  (1) gtk_style_apply_default_background() has an additional
+      argument, gboolean set_bg. This parameter should be FALSE if
+      the background is being set for a NO_WINDOW widget, otherwise
+      true.
+
+* During the development phase of the 1.1.x line of Gtk certain functions
+  were deprecated and later removed. Functions affected are:
+
+  Removed:                          Replacement:
+  gtk_clist_set_border		    gtk_clist_set_shadow_type
+  gtk_container_block_resize	    gtk_container_set_resize_mode
+  gtk_container_unblock_resize	    gtk_container_set_resize_mode
+  gtk_container_need_resize	    gtk_container_check_resize
+  gtk_ctree_show_stub		    gtk_ctree_set_show_stub
+  gtk_ctree_set_reorderable	    gtk_clist_set_reorderable
+  gtk_ctree_set_use_drag_icons	    gtk_clist_set_use_drag_icons
+  gtk_entry_adjust_scroll	    (1)
+  gtk_object_class_add_user_signal  gtk_object_class_user_signal_new
+  gtk_preview_put_row		    gtk_preview_put
+  gtk_progress_bar_construct	    gtk_progress_set_adjustment
+  gtk_scrolled_window_construct	    gtk_scrolled_window_set_{h|v}adjustment
+  gtk_spin_button_construct	    gtk_spin_button_configure
+  gtk_widget_thaw_accelerators	    gtk_widget_unlock_accelerators
+  gtk_widget_freeze_accelerators    gtk_widget_lock_accelerators
+
+(1) This function is no longer needed as GtkEntry should automatically
+    keep the scroll adjusted properly.
+
+* Additionally, all gtk_*_interp functions were removed.
+  gtk_*_full versions were provided as of GTK+-1.0 and should
+  be used instead.
+
+* GtkButton has been changed to derive from GtkBin.
+  To access a button's child, use GTK_BIN (button)->child, instead
+  of the old GTK_BUTTON (button)->child.
+
+* The selection API has been slightly modified:
+
+ gtk_selection_add_handler() and gtk_selection_add_handler_full() 
+ have been removed. To supply the selection, one now register
+ the targets one is interested in with:
+
+  void gtk_selection_add_target (GtkWidget           *widget, 
+	  	                 GdkAtom              selection,
+			         GdkAtom              target,
+			         guint                info);
+
+ or:
+  
+  void gtk_selection_add_targets (GtkWidget           *widget, 
+	  			  GdkAtom              selection,
+				  GtkTargetEntry      *targets,
+				  guint                ntargets);
+
+ When a request for a selection is received, the new "selection_get"
+ signal will be called:
+
+   void  "selection_get"           (GtkWidget          *widget,
+				    GtkSelectionData   *selection_data,
+				    guint               info,
+				    guint               time);
+
+ A "time" parameter has also been added to the "selection_received"
+ signal.
+
+  void  "selection_received"       (GtkWidget          *widget,
+				    GtkSelectionData   *selection_data,
+				    guint               time);
+
+* The old drag and drop API has been completely removed and replaced.
+  See the reference documentation for details on the new API.
+
+* Support for Themes has been added. In general, this does
+  not affect application code, however, a few new rules should
+  be observed:
+
+   - To set a shape for a window, you must use 
+     gtk_widget_shape_combine_mask() instead of 
+     gdk_window_shape_combine_mask(), or the shape will be
+     reset when switching themes.
+
+   - It is no longer permissable to draw directly on an arbitrary
+     widget, or to set an arbitrary widget's background pixmap.
+     If you need to do that, use a GtkDrawingArea or (for a 
+     toplevel) the new GtkDrawWindow widget.
+
+* The ScrolledWindow widget no longer creates a Viewport
+  automatically. Instead, it has been generalized to accept
+  any "self-scrolling" widget.
+
+  The self-scrolling widgets in the Gtk+ core are GtkViewport,
+  GtkCList, GtkCTree, GtkText, and GtkLayout. All of these widgets can
+  be added to a scrolled window as normal children with
+  gtk_container_add() and scrollbars will be set up automatically.
+
+  To add scrollbars to a non self-scrolling widget, (such as a GtkList),
+  first add it to a viewport, then add the viewport to a scrolled window.
+  The scrolled window code provides a convenience function to do this:
+
+  void gtk_scrolled_window_add_with_viewport (GtkScrolledWindow *scrollwin,
+					      GtkWidget         *child);
+
+  This does exactly what it says - it creates a Viewport, adds the child
+  widget to it, then adds the Viewport to the scrolled window.
+
+  The scrollbars have been removed from the GtkCList and GtkCTree,
+  because they are now scrolled by simply adding them to a Scrolled
+  Window. The scrollbar policy is set on the scrolled window with
+  gtk_scrolled_window_set_policy() and not on the child widgets
+  (e.g. GtkCList's gtk_clist_set_policy() was removed).
+  
+* The "main loop" of GTK+ has been moved to GLib. This should not
+  affect existing programs, since compatibility functions have
+  been provided. However, you may want to consider migrating
+  your code to use the GLib main loop directly.
+
+* the GTK_BASIC flag was removed, and with it the corresponding
+  macro and function GTK_WIDGET_BASIC() and gtk_widget_basic().
+  
+* All freeze/thaw methods are now recursive - that is, if you
+  freeze a widget n times, you must also thaw it n times.
+
+  Therefore, if you have code like:
+
+  gboolean frozen;
+  frozen = GTK_CLIST_FROZEN (clist);
+  gtk_clist_freeze (clist);
+  [...]
+  if (!frozen)
+    gtk_clist_thaw (clist);
+
+  it will not work anymore. It must be, simply:
+
+  gtk_clist_freeze (clist);
+  [...]
+  gtk_clist_thaw (clist);
+
+* The thread safety in GTK+ 1.2 is slightly different than
+  that which appeared in early versions in the 1.1
+  development track. The main difference is that it relies on 
+  the thread primitives in GLib, and on the thread-safe 
+  GLib main loop.
+
+  This means:
+
+   - You must call g_thread_init() before executing any
+     other GTK+ or GDK functions in a threaded GTK+ program.
+
+   - Idles, timeouts, and input functions are executed outside 
+     of the main GTK+ lock. So, if you need to call GTK+ 
+     inside of such a callback, you must surround the callback
+     with a gdk_threads_enter()/gdk_threads_leave() pair.
+
+     [ However, signals are still executed within the main
+       GTK+ lock ]
+
+     In particular, this means, if you are writing widgets
+     that might be used in threaded programs, you _must_
+     surround timeouts and idle functions in this matter.
+
+     As always, you must also surround any calls to GTK+
+     not made within a signal handler with a 
+     gdk_threads_enter()/gdk_threads_leave() pair.
+    
+   - There is no longer a special --with-threads configure
+     option for GTK+. To use threads in a GTK+ program, you
+     must:
+
+      a) If you want to use the native thread implementation,
+         make sure GLib found this in configuration, otherwise,
+         call you must provide a thread implementation to
+	 g_thread_init().
+   
+      b) Link with the libraries returned by:
+ 
+           gtk-config --libs gthread
+
+         and use the cflags from:
+
+            gtk-config --cflags gthread
+
+     You can get these CFLAGS and LIBS by passing gthread
+     as the fourth parameter to the AM_PATH_GTK automake
+     macro.
+
+* Prior to GTK+-1.2, there were two conflicting interpretations
+  of widget->requistion. It was either taken to be
+  the size that the widget requested, or that size
+  modified by calls to gtk_widget_set_usize(). In GTK+-1.2,
+  it is always interpreted the first way.
+
+  Container widgets are affected in two ways by this:
+
+   1) Container widgets should not pass widget->requisition
+      as the second parameter to gtk_widget_size_request().
+      Instead they should call it like:
+   
+      GtkRequisition child_requisition;
+      gtk_widget_size_request (widget, &child_requisition);
+
+   2) Container widgets should not access child->requisition
+      directly. Either they should use the values returned
+      by gtk_widget_size_request(), or they should call
+      the new function:
+
+    void gtk_widget_get_child_requisition (GtkWidget      *widget,
+					   GtkRequisition *requisition);
+
+      which returns the requisition of the given widget, modified
+      by calls to gtk_widget_set_usize().
+

docs/Makefile.am

@@ -1,22 +1,196 @@
 ## Process this file with automake to produce Makefile.in
 
-info_TEXINFOS = gdk.texi gtk.texi glib.texi
+info_TEXINFOS = gdk.texi gtk.texi 
+
+man_MANS = gtk-config.1
+
+TUTORIAL_FR_FILES=html/gtk_tut_fr-1.html   	\
+html/gtk_tut_fr-2.html   	\
+html/gtk_tut_fr-3.html   	\
+html/gtk_tut_fr-4.html   	\
+html/gtk_tut_fr-5.html   	\
+html/gtk_tut_fr-6.html   	\
+html/gtk_tut_fr-7.html   	\
+html/gtk_tut_fr-8.html   	\
+html/gtk_tut_fr-9.html   	\
+html/gtk_tut_fr-10.html  	\
+html/gtk_tut_fr-11.html  	\
+html/gtk_tut_fr-12.html  	\
+html/gtk_tut_fr-13.html  	\
+html/gtk_tut_fr-14.html  	\
+html/gtk_tut_fr-15.html  	\
+html/gtk_tut_fr-16.html  	\
+html/gtk_tut_fr-17.html  	\
+html/gtk_tut_fr-18.html  	\
+html/gtk_tut_fr-19.html  	\
+html/gtk_tut_fr-20.html  	\
+html/gtk_tut_fr-21.html  	\
+html/gtk_tut_fr-22.html  	\
+html/gtk_tut_fr-23.html  	\
+html/gtk_tut_fr-24.html  	\
+html/gtk_tut_fr.html text/gtk_tut_fr.txt
+
+TUTORIAL_FILES=text/gtk_tut.txt html/gtk_tut.html \
+html/gtk_tut.html        	\
+html/gtk_tut-1.html      	\
+html/gtk_tut-2.html      	\
+html/gtk_tut-3.html      	\
+html/gtk_tut-4.html      	\
+html/gtk_tut-5.html      	\
+html/gtk_tut-6.html      	\
+html/gtk_tut-7.html      	\
+html/gtk_tut-8.html      	\
+html/gtk_tut-9.html      	\
+html/gtk_tut-10.html     	\
+html/gtk_tut-11.html     	\
+html/gtk_tut-12.html     	\
+html/gtk_tut-13.html     	\
+html/gtk_tut-14.html     	\
+html/gtk_tut-15.html     	\
+html/gtk_tut-16.html     	\
+html/gtk_tut-17.html     	\
+html/gtk_tut-18.html     	\
+html/gtk_tut-19.html     	\
+html/gtk_tut-20.html     	\
+html/gtk_tut-21.html     	\
+html/gtk_tut-22.html     	\
+html/gtk_tut-23.html     	\
+html/gtk_tut-24.html     	\
+html/gtk_tut-25.html     	\
+html/gtk_tut-26.html     	\
+html/gtk_tut-27.html     	\
+html/gtk_tut-28.html     	\
+html/gtk_tut-29.html     	\
+html/gtk_tut-30.html     	\
+html/gtk_tut-31.html
+
+TUTORIAL_IT_FILES=	html/gtk_tut_it.html     	\
+	html/gtk_tut_it-1.html   	\
+	html/gtk_tut_it-2.html   	\
+	html/gtk_tut_it-3.html   	\
+	html/gtk_tut_it-4.html   	\
+	html/gtk_tut_it-5.html   	\
+	html/gtk_tut_it-6.html   	\
+	html/gtk_tut_it-7.html   	\
+	html/gtk_tut_it-8.html   	\
+	html/gtk_tut_it-9.html   	\
+	html/gtk_tut_it-10.html  	\
+	html/gtk_tut_it-11.html  	\
+	html/gtk_tut_it-12.html  	\
+	html/gtk_tut_it-13.html  	\
+	html/gtk_tut_it-14.html  	\
+	html/gtk_tut_it-15.html  	\
+	html/gtk_tut_it-16.html  	\
+	html/gtk_tut_it-17.html  	\
+	html/gtk_tut_it-18.html  	\
+	html/gtk_tut_it-19.html  	\
+	html/gtk_tut_it-20.html  	\
+	html/gtk_tut_it-21.html  	\
+	html/gtk_tut_it-22.html  	\
+	html/gtk_tut_it-23.html  	\
+	html/gtk_tut_it-24.html		\
+	text/gtk_tut_it.txt
+
+FAQ_FILES=html/gtkfaq.html		\
+	html/gtkfaq-1.html       	\
+	html/gtkfaq-2.html       	\
+	html/gtkfaq-3.html       	\
+	html/gtkfaq-4.html       	\
+	html/gtkfaq-5.html       	\
+	html/gtkfaq-6.html       	\
+	html/gtkfaq-7.html		\
+	text/gtkfaq.txt
+
+.PHONY: html htmldir faq tutorial tutorial_it tutorial_fr files
+
+htmldir:
+	(cd $(srcdir); mkdir -p html; cp gtk_tut*gif html)
+
+textdir:
+	mkdir -p $(srcdir)/text
+
+#
+# The content is useless and the texi makes texi2html unhappy 
+#
+#gdk.html gdk_toc.html: gdk.texi
+#	(cd $(srcdir); texi2html gdk.texi)
+#
+#gtk.html gtk_toc.html: gtk.texi
+#	(cd $(srcdir); texi2html gtk.texi)
+#
+#html/gdk.html html/gdk_toc.html: htmldir gdk.html gdk_toc.html
+#	(cd $(srcdir); cp gdk.html gdk_toc.html html/)
+#
+#html/gtk.html html/gtk_toc.html: htmldir gtk.html gtk_toc.html
+#	(cd $(srcdir); cp gtk.html gtk_toc.html html/)
+
+$(FAQ_FILES): faq
+
+faq: htmldir textdir
+	(cd $(srcdir); sgml2html gtkfaq.sgml; \
+	perl gtkdocs_fix gtkfaq*html; \
+	mv gtkfaq*html html/; \
+	sgml2txt gtkfaq.sgml; \
+	mv gtkfaq.txt text/)
+
+$(TUTORIAL_FILES): tutorial
+
+$(TUTORIAL_FR_FILES): tutorial_fr
+
+$(TUTORIAL_IT_FILES): tutorial_it
+
+tutorial: htmldir textdir
+	(cd $(srcdir); sgml2html gtk_tut.sgml; \
+	perl gtkdocs_fix gtk_tut*html; \
+	mv gtk_tut*html html/; \
+	sgml2txt gtk_tut.sgml; \
+	mv gtk_tut.txt text/)
+
+tutorial_it: htmldir textdir
+	(cd $(srcdir); sgml2html --language=it gtk_tut_it.sgml; \
+	perl gtkdocs_fix gtk_tut_it*html; \
+	mv gtk_tut_it*html html/; \
+	sgml2txt --language=it gtk_tut_it.sgml; \
+	mv gtk_tut_it.txt text/)
+
+tutorial_fr: htmldir textdir
+	(cd $(srcdir); sgml2html --language=fr gtk_tut_fr.sgml; \
+	perl gtkdocs_fix gtk_tut_fr*html; \
+	mv gtk_tut_fr*html html/; \
+	sgml2txt --language=fr gtk_tut_fr.sgml; \
+	mv gtk_tut_fr.txt text/)
 
-EXTRA_DIST =	\
-	texinfo.tex	\
-	macros.texi	\
-	Makefile.gtkfaq	\
-	gtkfaq.sgml	\
-	gtkfaq_fix	\
-	debugging.txt	\
-	developers.txt	\
-	refcounting.txt	\
-	styles.txt	\
-	text_widget.txt	\
-	widget_system.txt
-	
 
 files:
 	@files=`ls $(DISTFILES) 2> /dev/null `; for p in $$files; do \
 	  echo $$p; \
 	done
+
+EXTRA_DIST += \
+	Changes-1.2.txt			\
+	debugging.txt			\
+	developers.txt			\
+	refcounting.txt			\
+	styles.txt			\
+	text_widget.txt 		\
+	widget_system.txt 		\
+	generation.txt			\
+        gtk-config.txt  	        \
+	gtk-config.1.in			\
+	texinfo.tex 			\
+	macros.texi			\
+	gtkdocs_fix			\
+	gtkfaq.sgml			\
+	gtk_tut.sgml			\
+	gtk_tut_it.sgml			\
+	gtk_tut_fr.sgml			\
+	gtk_tut_packbox1.gif 		\
+	gtk_tut_packbox2.gif 		\
+	html/gtk_tut_table.gif		\
+	html/gtk_tut_packbox1.gif 	\
+	html/gtk_tut_packbox2.gif 	\
+	gtk_tut_table.gif		\
+	$(TUTORIAL_FILES)		\
+	$(TUTORIAL_FR_FILES)		\
+	$(TUTORIAL_IT_FILES)		\
+	$(FAQ_FILES)

docs/Makefile.gtkfaq

@@ -1,16 +0,0 @@
-#
-# To use this makefile, do:
-# make -f Makefile.gtkfaq
-#
-# This is not done by default because you might
-# not have sgml2html installed... Perhaps we could
-# detect that in the future and combine it in with
-# the automake stuff...
-#
-
-all: sgml
-
-sgml:
-	sgml2html gtkfaq.sgml
-	cp gtkfaq.html index.html
-	perl gtkfaq_fix *.html

docs/Makefile.in

@@ -1,294 +0,0 @@
-# Makefile.in generated automatically by automake 1.2c from Makefile.am
-
-# Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = /bin/sh
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = true
-PRE_INSTALL = true
-POST_INSTALL = true
-NORMAL_UNINSTALL = true
-PRE_UNINSTALL = true
-POST_UNINSTALL = true
-host_alias = @host_alias@
-host_triplet = @host@
-CC = @CC@
-CPP = @CPP@
-LD = @LD@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NM = @NM@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-x_cflags = @x_cflags@
-x_includes = @x_includes@
-x_ldflags = @x_ldflags@
-x_libs = @x_libs@
-xinput_progs = @xinput_progs@
-
-info_TEXINFOS = gdk.texi gtk.texi
-
-EXTRA_DIST = texinfo.tex macros.texi Makefile.gtkfaq gtkfaq.sgml gtkfaq_fix
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES = 
-TEXI2DVI = texi2dvi
-TEXINFO_TEX = $(srcdir)/texinfo.tex
-INFO_DEPS = gdk.info gtk.info
-DVIS = gdk.dvi gtk.dvi
-TEXINFOS = gdk.texi gtk.texi
-DIST_COMMON =  Makefile.am Makefile.in texinfo.tex
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP = --best
-default: all
-
-.SUFFIXES:
-.SUFFIXES: .dvi .info .ps .texi .texinfo
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-gdk.info: gdk.texi
-gdk.dvi: gdk.texi
-
-
-gtk.info: gtk.texi
-gtk.dvi: gtk.texi
-
-
-DVIPS = dvips
-
-.texi.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texi.dvi:
-	TEXINPUTS=$(srcdir):$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.dvi:
-	TEXINPUTS=$(srcdir):$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-.dvi.ps:
-	$(DVIPS) $< -o $@
-
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(infodir)
-	@for file in $(INFO_DEPS); do \
-	  d=$(srcdir); \
-	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
-	    if test -f $$d/$$ifile; then \
-	      echo " $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile"; \
-	      $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile; \
-	    else : ; fi; \
-	  done; \
-	done
-	@$(POST_INSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  for file in $(INFO_DEPS); do \
-	    echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
-	    install-info --info-dir=$(infodir) $(infodir)/$$file || :;\
-	  done; \
-	else : ; fi
-
-uninstall-info:
-	$(PRE_UNINSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  ii=yes; \
-	else ii=; fi; \
-	for file in $(INFO_DEPS); do \
-	  test -z $ii || install-info --info-dir=$(infodir) --remove $$file; \
-	done
-	$(NORMAL_UNINSTALL)
-	for file in $(INFO_DEPS); do \
-	  (cd $(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
-	done
-
-dist-info: $(INFO_DEPS)
-	for base in $(INFO_DEPS); do \
-	  d=$(srcdir); \
-	  for file in `cd $$d && eval echo $$base*`; do \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file; \
-	  done; \
-	done
-
-mostlyclean-aminfo:
-	-rm -f gdk.aux gdk.cp gdk.cps gdk.dvi gdk.fn gdk.fns gdk.ky gdk.kys \
-	  gdk.ps gdk.log gdk.pg gdk.toc gdk.tp gdk.tps gdk.vr gdk.vrs \
-	  gdk.op gdk.tr gdk.cv gdk.cn gtk.aux gtk.cp gtk.cps gtk.dvi \
-	  gtk.fn gtk.fns gtk.ky gtk.kys gtk.ps gtk.log gtk.pg gtk.toc \
-	  gtk.tp gtk.tps gtk.vr gtk.vrs gtk.op gtk.tr gtk.cv gtk.cn
-
-clean-aminfo:
-
-distclean-aminfo:
-
-maintainer-clean-aminfo:
-	for i in $(INFO_DEPS); do \
-	  rm -f $$i; \
-	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
-	    rm -f $$i-[0-9]*; \
-	  fi; \
-	done
-tags: TAGS
-TAGS:
-
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = docs
-
-distdir: $(DISTFILES)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(top_distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu docs/Makefile
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
-	  test -f $(distdir)/$$file \
-	  || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	  || cp -p $$d/$$file $(distdir)/$$file; \
-	done
-	$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-info: $(INFO_DEPS)
-dvi: $(DVIS)
-check: all
-	$(MAKE)
-installcheck:
-install-exec: 
-	@$(NORMAL_INSTALL)
-
-install-data: install-info-am
-	@$(NORMAL_INSTALL)
-
-install: install-exec install-data all
-	@:
-
-uninstall: uninstall-info
-
-all: Makefile $(INFO_DEPS)
-
-install-strip:
-	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
-installdirs:
-	$(mkinstalldirs)  $(infodir)
-
-
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(DISTCLEANFILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean:  mostlyclean-aminfo mostlyclean-generic
-
-clean:  clean-aminfo clean-generic mostlyclean
-
-distclean:  distclean-aminfo distclean-generic clean
-	-rm -f config.status
-	-rm -f libtool
-
-maintainer-clean:  maintainer-clean-aminfo maintainer-clean-generic \
-		distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-.PHONY: default install-info-am uninstall-info mostlyclean-aminfo \
-distclean-aminfo clean-aminfo maintainer-clean-aminfo tags distdir info \
-dvi installcheck install-exec install-data install uninstall all \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-files:
-	@files=`ls $(DISTFILES) 2> /dev/null `; for p in $$files; do \
-	  echo $$p; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

docs/debugging.txt

@@ -53,11 +53,10 @@ by the:
 First the environment variables are applied, then the command line
 options are applied in the order given on the command line.
 
-Each of these can either be the special value ALL, or a sequence of
-':' separated options. (Note, case is significant). The environment
-variables and the --gtk-debug and --gdk-debug options add debugging
-options and the --gtk-no-debug and --gdk-no-debug options remove
-them.
+Each of these can either be the special value 'all', or a sequence of
+':' separated options. (case is ignored). The environment variables
+and the --gtk-debug and --gdk-debug options add debugging options and
+the --gtk-no-debug and --gdk-no-debug options remove them.
 
 As noted below, some of these are useful in application debugging, but
 most are only interested to those debugging the libraries

docs/dnd_internals.txt

@@ -0,0 +1,210 @@
+This document describes some of the internals of the DND handling
+code.
+
+Organization
+============
+
+The DND code is split between a lowlevel part - gdkdnd.c and a
+highlevel part - gtkdnd.c.  To put it simply, gdkdnd.c contain the
+portions of DND code that are easiest to do in raw X, while gtkdnd.c
+contains the portions of DND that are easiest to do with an event loop
+and high level selection handling.
+
+Except for a few details of selection handling, most of the
+dependencies on the DND protocol are confined to gdkdnd.c.
+There are two or three supported protocols - Motif DND,
+Xdnd and a pseudo-protocol ROOTWIN, which is used for drops
+on root windows that aren't really accepting drops.
+gdkdnd.c divides into 4 pieces:
+
+ 1) Utility functions (finding client windows)
+ 2) Motif specific code (the biggest chunk)
+ 3) Xdnd specific code
+ 4) The public interfaces
+
+The code in gtkdnd.c roughly consists of three parts  
+  
+ 1) General utility functions
+ 2) Destination side code
+ 3) Source side code.
+
+Both on the source and dest side, there is some division
+between the low level layers and the default handlers,
+though they are rather mixed in many cases.
+
+Structures and Memory Management
+================================
+
+Information about source sites and drop sites is stored
+in the structures GtkSourceSite and GtkDestSite.
+
+Information about in-progress drags and drops is stored
+in the structures GtkSourceInfo and GtkDestInfo.
+
+The GtkSourceInfo structure is created when the drag
+begins, and persists until the drag either completes
+or times out. A pointer to it is stored in 
+dataset-data for the GdkDragContext, however there
+is no ownership. If the SourceInfo is destroyed
+before the context, the field is simply cleared.
+
+A GtkDestInfo is attached to each GdkDragContext
+that is received for an incoming drag. In contrast
+to the SourceInfo the DestInfo is "owned" by the
+context, and when the context is destroyed, destroyed.
+
+The GDK API
+===========
+
+It is expect that the GDK DND API will never be
+used by anything other than the DND code in GTK+.
+
+/* Drag and Drop */
+
+GdkDragContext * gdk_drag_context_new        (void);
+void             gdk_drag_context_ref        (GdkDragContext *context);
+void             gdk_drag_context_unref      (GdkDragContext *context);
+
+These create and refcount GdkDragContexts in a
+straightforward manner.
+
+/* Destination side */
+
+void             gdk_drag_status        (GdkDragContext   *context,
+				         GdkDragAction     action,
+					 guint32           time);
+void             gdk_drop_reply         (GdkDragContext   *context,
+					 gboolean          ok,
+					 guint32           time);
+void             gdk_drop_finish        (GdkDragContext   *context,
+					 gboolean          success,
+					 guint32           time);
+GdkAtom          gdk_drag_get_selection (GdkDragContext   *context);
+
+/* Source side */
+
+GdkDragContext * gdk_drag_begin      (GdkWindow      *window,
+				      GList          *targets,
+				      GdkDragAction   actions);
+gboolean         gdk_drag_get_protocol (guint32          xid,
+					GdkDragProtocol *protocol);
+void             gdk_drag_find_window (GdkDragContext   *context,
+				       GdkWindow       *drag_window,
+			 	       gint             x_root,
+				       gint             y_root,
+				       GdkWindow      **dest_window,
+				       GdkDragProtocol *protocol);
+gboolean        gdk_drag_motion      (GdkDragContext *context,
+				      GdkWindow      *dest_window,
+				      GdkDragProtocol protocol,
+				      gint            x_root, 
+				      gint            y_root,
+				      GdkDragAction   action,
+				      guint32         time);
+void            gdk_drag_drop        (GdkDragContext *context,
+				      guint32         time);
+void            gdk_drag_abort       (GdkDragContext *context,
+				      guint32         time);
+
+GdkAtom       gdk_drag_get_selection (GdkDragContext *context);
+
+Retrieves the selection that will be used to communicate
+the data for the drag context (valid on both source
+and dest sides)
+
+Cursors and window heirarchies
+==============================
+
+The DND code, when possible (and it isn't possible over
+Motif window) uses a shaped window as a drag icon.
+Because the cursor may fall inside this window during the
+drag, we actually have to figure out which window
+the cursor is in _ourselves_ so we can ignore the
+drag icon properly. (Oh for OutputOnly windows!)
+
+To avoid obscene amounts of server traffic (which are only
+slighly observerable locally, but would really kill a
+session over a slow link), the code in GDK does
+XGetWindowAttributes for every child of the root window at
+the beginning of the drag, then selects with
+SubstructureNotifyMask on the root window, so that
+it can update this list.
+
+It probably would be easier to just reread the entire
+list when one of these events occurs, instead of 
+incrementally updating, but updating the list in
+sync was sort of fun code, so I did it that way ;-)
+
+There is also a problem of trying to follow the
+mouse cursor as well as possible. Currently, the
+code uses PointerMotionHint, and an XQueryPointer
+on MotionNotify events. This results in pretty
+good syncing, but may result in somewhat poor
+accuracy for drops. (Because the coordinates of
+the drop are the coordinates when the server receives
+the button press, which might actually be before
+the XQueryPointer for the previous MotionNotify
+event is done.)
+
+Probably better is doing MotionNotify compression 
+and discarding MotionNotify events when there
+are more on the queue before the next ButtonPress/Release.
+
+Proxying
+========
+
+A perhaps rather unusual feature of GTK's DND is proxying. A
+dest site can be specified as a proxy drop site for another
+window. This is most needed for the plug-socket code - the
+socket needs to pass on drags to the plug since the original
+source only sees toplevel windows. However, it can also be
+used as a user visible proxy - i.e., dragging to buttons on
+the taskbar.
+
+Internally, when the outer drag enters a proxy dest site, a
+new source drag is created, with SourceInfo and
+GdkDragContext. From the GDK side, it looks much like a
+normal source drag; on the GTK+ side, most of the code is
+disjoint. The need to pass in a specific target window
+is the reason why the GDK DND API splits
+gdk_drag_find_window() and gdk_drag_motion().
+
+For proxy drags, the GtkDestInfo and GtkSourceInfo for the
+drag point at each other.
+
+Because the abstraction of the drag protocol is at the GDK
+level, a proxy drag from Motif to Xdnd or vice versa happens
+pretty much automatically during the drag, though the
+drop can get complicated. For Xdnd <-> Motif,
+Motif <-> Xdnd, or Motif <-> Motif drags, it is necessary to 
+for the Proxy to retrieve the data and pass it on to
+the true destination, since either the selection names
+differ or (Motif<->Motif), the proxy needs to know
+about the XmDRAG_SUCCESS/FAILURE selection targets.
+
+Further Reading:
+================
+
+Xdnd:
+
+The spec is at:
+
+ http://www.cco.caltech.edu/~jafl/xdnd/
+
+Motif:
+
+The Motif DND protocol is best described in the 
+Hungry Programmers _Inside Lesstif_ book, available
+from:
+
+  http://www.igpm.rwth-aachen.de/~albrecht/hungry.html
+
+Harald Albrecht and Mitch Miers have done a far
+better job at documenting the DND protocol then
+anything the OpenGroup has produced.
+
+
+
+Owen Taylor
+otaylor@redhat.com
+Oct 18, 1998

docs/gdk.sgml

@@ -0,0 +1,198 @@
+<!doctype linuxdoc system>
+
+<article>
+
+<!-- Title information -->
+
+<title>The GTK+ Drawing Kit Programming Manual
+<author>Shawn T. Amundson, Peter Mattis
+<date>July 26, 1998
+
+<abstract>
+This document aims at teaching user how to effectively program in
+GDK, the GTK+ Drawing Kit, and to serve as a reference guide to 
+more experienced GTK+ programmers.  It is a work in progress.
+
+<!-- Table of contents -->
+<toc>
+
+<!-- Begin the document -->
+
+<!-- ***************************************************************** -->
+<sect>Introduction
+
+<p>
+GDK is designed as a wrapper library that lies on top of Xlib. It
+performs many common and desired operations for a programmer instead
+of the programmer having to explicitly ask for such functionality from
+Xlib directly. For example, GDK provides a common interface to both
+regular and shared memory XImage types. By doing so, an application
+can nearly transparently use the fastest image type available. GDK
+also provides routines for determining the best available color depth
+and the best available visual which is not always the default visual
+for a screen.
+
+GDK is distributed and developed with GTK+, and is licensed under the 
+GNU Library General Public Licence (LGPL).
+
+<sect>Getting Started
+
+<sect1>Initialization
+<p>
+Initialization of GDK is easy.  Simply call gdk_init() passing 
+in the argc and argv parameters.
+
+<tscreen><verb>
+int main (int argc, char *argv[])
+{
+    /* Initialize GDK. */
+    gdk_init (&amp;argc, &amp;argv);
+
+    /* Cleanup of GDK is done automatically when the program exits. */
+    return 0;
+}
+</verb></tscreen>
+
+Generally, GDK initialization is done by gtk_init() in GTK+.  This means 
+that when using GTK+, you do not need to directly call gdk_init().
+
+<sect1>An Example using GDK with GTK+ 
+<p>
+This example demonstrates drawing a line using the foreground
+color of the GtkDrawArea widget it is drawn inside.  The example 
+will end when you click inside the window, which is filled by the
+GtkDrawingArea widget.
+
+The line is drawn during the expose event so that when the window 
+drawing is done whenever it is needed.
+
+<tscreen><verb>
+#include <gtk/gtk.h>
+
+/* The expose callback does the drawing of the line */
+int
+expose_callback (GtkWidget *widget, GdkEventExpose *event, gpointer data)
+{
+    GdkGC *gc;
+
+    printf("expose...\n");
+
+
+    /* The GC is the Graphics Context.  Here it is borrowed from the widget */
+    gc = widget->style->fg_gc[GTK_STATE_NORMAL];
+
+    gdk_draw_line (widget->window,  /* GDK Window of GtkDrawingArea widget */
+                   gc,              /* Graphics Context */
+                   0,               /* x1, left */
+                   0,               /* y1, top */
+                   200,             /* x2, right */
+                   200);            /* y2, bottom */
+}
+
+/* This quits GTK+ */
+void destroy (GtkWidget *widget, gpointer data)
+{
+    gtk_main_quit ();
+}
+
+int main (int argc, char *argv[])
+{
+    GtkWidget *window;
+    GtkWidget *darea;
+    int events;
+
+    /* This initializes both GTK+ and GDK */
+    gtk_init (&amp;argc, &amp;argv);
+
+    /* Create a window */
+    window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+    gtk_signal_connect (GTK_OBJECT (window), "destroy",
+                        GTK_SIGNAL_FUNC (destroy), NULL);
+
+    /* Create a drawing area widget. This widget actually is just a 
+       simple widget which provides us an GDK window to draw on and 
+       takes care of all the toolkit integration, like providing the
+       ability to add it to the window with gtk_contianer_add() */
+    darea = gtk_drawing_area_new ();
+    gtk_container_add (GTK_CONTAINER (window), darea);
+
+    /* Set the width and height (arguments are in that order) */
+    gtk_drawing_area_size (GTK_DRAWING_AREA (darea), 200, 200);
+
+    /* Drawing in the expose event is important to keep the 
+       draw line always on the GDK window */
+    gtk_signal_connect (GTK_OBJECT (darea), "expose_event",
+                        GTK_SIGNAL_FUNC (expose_callback), NULL);
+
+    /* We get the events, then add in button press.  If we did not
+       do this, we would not be notified of button press events in
+       the GtkDrawingArea widget */
+    events = gtk_widget_get_events (darea);
+    gtk_widget_set_events (darea, events | GDK_BUTTON_PRESS_MASK);
+
+    /* If we click on the darea, the application will exit */
+    gtk_signal_connect_object (GTK_OBJECT (darea), "button_press_event",
+                               GTK_SIGNAL_FUNC (gtk_widget_destroy),
+                               GTK_OBJECT (window));
+
+    gtk_widget_show (darea);
+    gtk_widget_show (window);
+
+    /* The GTK+ main idle loop */
+    gtk_main();
+
+    /* Cleanup of GDK is done automatically when the program exits. */
+    return 0;
+}
+</verb></tscreen>
+
+<sect>The Graphics Context 
+<p>
+The Graphics Context, or GC, defines how things should be drawn, 
+including color, font, fill, tile, stipple, clipping mask, line 
+width, line style, and join style.
+
+<sect1>Color
+<p>
+Changing color is done by changing the forground or background color 
+of the GC.
+
+<sect>Drawing Commands
+<sect>Event Handling
+<sect>Understanding and Using Visuals
+<sect>Creating and Using New Windows
+<sect>Pixmaps
+<sect>Images
+<sect>Fonts
+<sect>
+
+<sect>About this Document
+<sect1>History
+<P>
+This document was originially written by Peter Mattis and entitled
+"The General Drawing Kit".  It was meant as a reference guide.
+
+This version of the document has been renamed and is meant as a general
+programming guide.
+
+<sect1>Copying
+<p>
+Copyright (c) 1996 Peter Mattis
+<p>
+Copyright (c) 1998 Shawn T. Amundson
+
+Permission is granted to make and distribute verbatim copies of this
+manual provided the copyright notice and this permission notice are
+preserved on all copies.
+
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions,
+except that this permission notice may be stated in a translation
+approved by Peter Mattis.
+
+</article>

docs/generation.txt

@@ -0,0 +1,177 @@
+Overview:
+========
+
+This file describes the way that autogeneration
+works within the GTK+ source code.
+
+The following files in the gdk/ subdirectory
+are autogenerated:
+
+  gdkkeysyms.h
+  gdkcursors.h 
+
+The following files in the gtk/ subdirectory 
+are autogenerated:
+
+ gtk.defs
+   Description of GTK+ types (and some functions) in a lisp-style
+   format.
+ gtktypebuiltins.h
+   Header file including declarations for internal types  
+ gtktypebuiltins_vars.c
+   Variables for type values for internal types.
+ gtktypebuiltins_ids.c
+   Arrays holding information about each internal type.
+ gtktypebuiltins_evals.c
+   Arrays holding mapping between enumeration values
+   and strings.
+
+ gtkmarshal.c
+ gtkmarshal.h
+   Autogenerated signal marshallers
+
+GDK
+===
+
+gdkkeysyms.h and gdkcursors.h are generated from
+the corresponding header files
+
+  X11/cursorfont.h
+  X11/keysymdef.h
+
+by some simple sed scripts. These are not actually
+run automatically because we want all the keysyms
+even on systems with a limited set.
+So the Gdk rule to generate both files (X-derived-headers)
+only needs to be rerun for every new release of the X Window
+System.
+
+GTK+ - type definitions
+=======================
+
+The type definitions are generated from several sources:
+
+ gtk-boxed.defs - definitions for boxed types
+ GTK+ header files
+ GDK header files
+
+The makeenums.pl script does a heuristic parse of 
+the header files and extracts all enumerations declarations.
+It also recognizes a number of pseudo-comments in the
+header files:
+
+Two of these apply to individual enumeration values:
+
+  /*< skip >*/
+
+ This enumeration value should be skipped.
+  
+  /*< nick=NICK >*/
+
+ The nickname for this value should NICK instead of the
+ normally guessed value. For instance:
+
+  typedef enum {
+    GTK_TARGET_SAME_APP = 1 << 0,    /*< nick=same-app >*/
+    GTK_TARGET_SAME_WIDGET = 1 << 1  /*< nick=same-widget >*/
+  } GtkTargetFlags;
+
+ makes the nicks "same-app" and "same-widget", instead of
+ "app" and "widget" that would normally be used.
+
+The other two apply to entire enumeration declarations.
+ 
+  /*< prefix=PREFIX >*/
+
+  Specifies the prefix to be removed from the enumeration
+  values to generate nicknames.
+
+  /*< flags >*/
+
+ Specifies that this enumeration is used as a bitfield.
+ (makenums.pl normally guesses this from the presence of values
+  with << operators). For instance:
+
+  typedef enum                    /*< flags >*/
+  {
+    GDK_IM_PREEDIT_AREA      = 0x0001, 
+    GDK_IM_PREEDIT_CALLBACKS = 0x0002, 
+    [ ... ]
+ } GdkIMStyle;
+
+makeenums.pl can be run into two modes:
+
+ 1) Generate the gtktypebuiltins_eval.c file (this
+    contains arrays holding the mapping of 
+    string <=> enumeration value)
+
+ 2) Generate the enumeration portion of gtk.defs.
+
+The enumearation portion is added to the boxed type 
+declarations in gtk-boxed.defs to create gtk.defs.
+
+The makeetypes.awk program takes the gtk.defs file, and
+from that generates various files depending on the
+third parameter passed to it:
+
+ macros: gtktypebuiltins.h
+ variables: gtktypebuiltins_vars.c
+ entries: gtktypebuiltins_ids.c
+
+GTK+ - marshallers
+==================
+
+The files gtkmarshal.c and gtkmarshal.h include declarations
+and definitions for the marshallers needed inside of
+GTK+. The marshallers to be generated are listed in
+the file gtkmashal.list, which is processed
+by genmarshal.pl.
+
+The format of this file is a list of lines:
+
+  <retval-type>:<arg1-type>,<arg2-type>,<arg3-type>
+ 
+e.g.:
+
+  BOOL:POINTER,STRING,STRING,POINTER
+
+A marshaller is generated for each line in the file.
+The possible types are:
+
+ NONE
+ BOOL
+ CHAR
+ INT
+ UINT
+ LONG
+ ULONG
+ FLOAT
+ DOUBLE
+ STRING
+ ENUM
+ FLAGS
+ BOXED
+ POINTER
+ OBJECT
+ FOREIGN    (gpointer data, GtkDestroyNotify notify)
+ C_CALLBACK (GtkFunction func, gpointer func_data)
+ SIGNAL     (GtkSignalFunc f, gpointer data)
+ ARGS       (gint n_args, GtkArg *args)
+ CALLBACK   (GtkCallBackMarshal marshall,
+             gpointer data,
+	     GtkDestroyNotify Notify)
+
+Some of these types map to multiple return values - these
+are marked above with the return types in parantheses.
+
+NOTES
+=====
+
+When autogenerating GTK+ files, the autogenerated
+files are often rebuild resulting in the same result.
+
+To prevent unecessary rebuilds of the entire directory, some files
+that multiple other source files depend on are not actually written
+to directly.  Instead, an intermediate file is written, which
+is then compared to the old file, and only if it is different
+is it copied into the final location.

docs/glib.texi

@@ -1,455 +0,0 @@
-\input texinfo @c -*-texinfo-*-
-@c %**start of header
-@setfilename glib.info
-@settitle GLIB
-@setchapternewpage odd
-
-@set edition 1.0
-@set update-date 3 Feburary 1998
-@set update-month Feburary 1998
-@c %**end of header
-
-@ifinfo
-This file documents GLIB, A library of useful routines for C programming
-
-Copyright (C) 1998 Gregory A McLean
-
-Permission is granted to make and distributed verbatim copies of this
-manual, provided the copyright notice and this permission notice are
-preserved on all copies. 
-
-@ignore
-Permission is granted to process this file throught TeX and print the 
-results, provided the printed document carries copying permission notice 
-identical to this one except for the removal of this paragraph (this 
-paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that this permission notice may be stated in a translation
-approved by Gregory McLean.
-@end ifinfo
-
-@titlepage
-@title GLIB, Useful routines for C programming 
-@subtitle Version 1.0
-@subtitle @value{update-month}
-@author by Gregory McLean
-
-@page
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1998 Gregory McLean
-
-Permission is granted to make and distribute verbatim copies of this
-manual provided the copyright notice and this permission notice are
-preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that this permission notice may be stated in a translation
-approved by Gregory McLean.
-@end titlepage
-
-@dircategory Library of useful routines for 'C' programing
-@direntry
-* GLIB: (glib).        useful routines for 'C' programming
-@end direntry
-
-@node Top, Copying, (dir), (dir)
-@top useful routines for 'C' programming
-@ifinfo
-This is edition @value{edition} of the GLIB documentation,
-@w{@value{update-date}}.
-@end ifinfo
-
-@menu
-* Copying::                     Your rights.
-* Overview::                    What is GLIB?
-* Doubly linked lists::         Doubly linked lists
-* Signly linked lists::         Singly linked lists
-* List allocators::             List Allocators
-* Hash tables::                 Hash tables
-* Caches::                      Cache handling
-* Trees::                       Tree handling
-* Memory::                      Memory handling
-* Timers::                      Timer functions
-* Output::                      Output handling
-* Utilities::                   Utilitiy functions
-* Errors::                      Error handling
-* String Chunks::               String Chunks
-* Strings::                     String handling
-* Resizable arrays::            Resizeable arrays
-* GScanner::                    Flexible lexical scanner
-* Miscellany::                  Other stuff
-* Function Index::              Index of functions
-* Concept Index::               Index of concepts
-@end menu
-
-@node Copying, Overview, Top, Top
-@comment node-name, next, previous, up
-@chapter Copying
-
-@node Overview, Doubly linked lists, Copying, Top
-@comment node-name, next, previous, up
-@chapter What is GLIB
-
-@node Doubly linked lists, Signly linked lists, Overview, Top
-@comment node-name, next, previous, up
-@chapter Doubly linked lists
-
-@subsection Functions
-
-@deftypefun GList* g_list_alloc (void)
-@end deftypefun
-
-@deftypefun void g_list_free (GList *@var{list})
-@end deftypefun
-
-@deftypefun void g_list_free_1 (GList *@var{list})
-@end deftypefun
-
-@deftypefun GList* g_list_append (GList *@var{list}, gpointer @var{data})
-@end deftypefun
-
-@deftypefun GList* g_list_prepend (GList *@var{list}, gpointer @var{data})
-@end deftypefun
-
-@deftypefun GList* g_list_insert (GList *@var{list}, gpointer @var{data}, gint @var{position})
-@end deftypefun
-
-@deftypefun GList* g_list_insert_sorted (GList *@var{list}, gpointer @var{data}, GCompareFunc @var{func})
-@end deftypefun
-
-@deftypefun GList* g_list_concat (GList *@var{list1}, GList *@var{list2})
-@end deftypefun
-
-@deftypefun GList* g_list_remove (GList *@var{list}, gpointer @var{data})
-@end deftypefun
-
-@deftypefun GList* g_list_remove_link (GList *@var{list}, GList *@var{link})
-@end deftypefun
-
-@deftypefun GList* g_list_reverse (GList *@var{list})
-@end deftypefun
-
-@deftypefun GList* g_list_nth (GList *@var{list}, gint @var{n})
-@end deftypefun
-
-@deftypefun GList* g_list_find (GList *@var{list}, gpointer @var{data})
-@end deftypefun
-
-@deftypefun GList* g_list_last (GList *@var{list})
-@end deftypefun
-
-@deftypefun GList* g_list_first (GList *@var{list})
-@end deftypefun
-
-@deftypefun gint g_list_length (GList *@var{list})
-@end deftypefun
-
-@deftypefun void g_list_foreach (GList *@var{list}, GFunc @var{func}, gpointer @var{user_data})
-@end deftypefun
-
-@node Signly linked lists, List allocators, Doubly linked lists, Top
-@comment node-name, next, previous, up
-@chapter Signly linked lists
-
-@subsection Functions
-@deftypefun GSList* g_slist_alloc (void)
-@end deftypefun
-
-@deftypefun void g_slist_free (GSList *@var{list})
-@end deftypefun
-
-@deftypefun void g_slist_free_1 (GSList *@var{list})
-@end deftypefun
-
-@deftypefun GSList* g_slist_append (GSList *@var{list}, gpointer @var{data})
-@end deftypefun
-
-@deftypefun GSList* g_slist_prepend (GSList *@var{list}, gpointer @var{data})
-@end deftypefun
-
-@deftypefun GSList* g_slist_insert (GSList *@var{list}, gpointer @var{data}, gint @var{position})
-@end deftypefun
-
-@deftypefun GSList* g_slist_insert_sorted (GSList *@var{list}, gpointer @var{data}, GCompareFunc @var{func})
-@end deftypefun
-
-@deftypefun GSList* g_slist_concat (GSList *@var{list1}, GSList *@var{list2})
-@end deftypefun
-
-@deftypefun GSList* g_slist_remove (GSList *@var{list}, gpointer @var{data})
-@end deftypefun
-
-@deftypefun GSList* g_slist_remove_link (GSList *@var{list}, GSList *@var{link})
-@end deftypefun
-
-@deftypefun GSList* g_slist_reverse (GSList *@var{list})
-@end deftypefun
-
-@deftypefun GSList* g_slist_nth (GSList *@var{list}, gint @var{n})
-@end deftypefun
-
-@deftypefun GSList* g_slist_find (GSList *@var{list}, gpointer @var{data})
-@end deftypefun
-
-@deftypefun GSList* g_slist_last (GSList *@var{list})
-@end deftypefun
-
-@deftypefun gint g_slist_length (GSList *@var{list})
-@end deftypefun
-
-@deftypefun void g_slist_foreach (GSList *@var{list}, GFunc @var{func}, gpointer @var{user_data})
-@end deftypefun
-
-@node List allocators, Hash tables, Signly linked lists, Top
-@comment node-name, next, previous, up
-@chapter List allocators
-
-@subsection Functions
-
-@deftypefun GListAllocator* g_list_allocator_new (void)
-@end deftypefun
-
-@deftypefun void g_list_allocator_free (GListAllocator *@var{allocator})
-@end deftypefun
-
-@deftypefun GListAllocator* g_slist_set_allocator (GListAllocator *@var{allocator})
-@end deftypefun
-
-@deftypefun GListAllocator* g_list_set_allocator (GListAllocator *@var{allocator})
-@end deftypefun
-
-@node Hash tables, Caches, List allocators, Top
-@comment node-name, next, previous, up
-@chapter Hash tables
-
-@subsection Functions
-
-@deftypefun GHashTable* g_hash_table_new (GHashFunc @var{hash_func}, GCompareFunc @var{key_compare_func})
-@end deftypefun
-
-@deftypefun void g_hash_table_destroy (GHashTable *@var{hash_table})
-@end deftypefun
-
-@deftypefun void g_hash_table_insert (GHashTable *@var{hash_table}, gpointer @var{key}, gpointer @var{value})
-@end deftypefun
-
-@deftypefun void g_hash_table_remove (GHashTable *@var{hash_table}, gpointer @var{key})
-@end deftypefun
-
-@deftypefun gpointer g_hash_table_lookup (GHashTable *@var{hash_table}, gpointer @var{key})
-@end deftypefun
-
-@deftypefun void g_hash_table_freeze (GHashTable *@var{hash_table})
-@end deftypefun
-
-@deftypefun void g_hash_table_thaw (GHashTable *@var{hash_table})
-@end deftypefun
-
-@deftypefun void g_hash_table_foreach (GHashTable *@var{hash_table}, GHFunc @var{func}, gpointer @var{user_data})
-@end deftypefun
-
-@node Caches, Trees, Hash tables, Top
-@comment node-name, next, previous, up
-@chapter Cache handling
-
-@subsection Functions
-
-@deftypefun GCache* g_cache_new (GCacheNewFunc @var{value_new_func}, GCacheDestroyFunc @var{value_destroy_func}, GCacheDupFunc @var{key_dup_func}, GCacheDestroyFunc @var{key_destroy_func}, GHashFunc @var{hash_key_func}, GHashFunc @var{hash_value_func}, GCompareFunc @var{key_compare_func})
-@end deftypefun
-
-@deftypefun void g_cache_destroy (GCache *@var{cache})
-@end deftypefun
-
-@deftypefun gpointer g_cache_insert (GCache *@var{cache}, gpointer @var{key})
-@end deftypefun
-
-@deftypefun void g_cache_remove (GCache *@var{cache}, gpointer @var{key})
-@end deftypefun
-
-@deftypefun void g_cache_key_foreach (GCache *@var{cache}, GHFunc @var{func}, gpointer @var{user_data})
-@end deftypefun
-
-@deftypefun void g_cache_value_foreach (GCache *@var{cache}, GHFunc @var{func}, gpointer @var{user_data})
-@end deftypefun
-
-@node Trees, Memory, Caches, Top
-@comment node-name, next, previous, up
-@chapter Tree handling
-
-@subsection Functions
-
-@deftypefun GTree* g_tree_new (GCompareFunc @var{key_compare_func})
-@end deftypefun
-
-@deftypefun void g_tree_destroy (GTree *@var{tree})
-@end deftypefun
-
-@deftypefun void g_tree_remove (GTree *@var{tree}, gpointer @var{key}, gpointer @var{value})
-@end deftypefun
-
-@deftypefun gpointer g_tree_lookup (GTree *@var{tree}, gpointer @var{key})
-@end deftypefun
-
-@deftypefun void g_tree_traverse (GTree *@var{tree}, GTraverseFunc @var{traverse_func}, GTraverseType @var{traverse_type}, gpointer @var{data}
-@end deftypefun
-
-@deftypefun gpointer g_tree_search (GTree *@var{tree}, GSearchFunc @var{search_func}, gpointer @var{data})
-@end deftypefun
-
-@deftypefun gint g_tree_height (GTree *@var{tree})
-@end deftypefun
-
-@deftypefun gint g_tree_nnodes (GTree *@var{tree})
-@end deftypefun
-
-@node Memory, Timers, Trees, Top
-@comment node-name, next, previous, up
-@chapter Memory handling
-
-@subsection Functions
-
-@deftypefun gpointer g_malloc (gulong @var{size})
-@end deftypefun
-
-@deftypefun gpointer g_malloc0 (gulong @var{size})
-@end deftypefun
-
-@deftypefun gpointer g_realloc (gpointer @var{mem}, gulong @var{size})
-@end deftypefun
-
-@deftypefun void g_mem_profile (void)
-@end deftypefun
-
-@deftypefun void g_mem_check (gpointer @var{mem})
-@end deftypefun
-
-@deftypefun GMemChunk* g_mem_chunk_new (gchar *@var{name}, gint @var{atom_size}, gulong @var{area_size}, gint @var{type})
-@end deftypefun
-
-@deftypefun void g_mem_chunk_destroy (GMemChunk *@var{mem_chunk})
-@end deftypefun
-
-@deftypefun gpointer g_mem_chunk_alloc (GMemChunk *@var{mem_chunk})
-@end deftypefun
-
-@deftypefun void g_mem_chunk_free (GMemChunk *@var{mem_chunk}, gpointer @var{mem})
-@end deftypefun
-
-@deftypefun void g_mem_chunk_clean (GMemChunk *@var{mem_chunk})
-@end deftypefun
-
-@deftypefun void g_mem_chunk_reset (GMemChunk *@var{mem_chunk})
-@end deftypefun
-
-@deftypefun void g_mem_chunk_print (GMemChunk *@var{mem_chunk})
-@end deftypefun
-
-@deftypefun void g_mem_chunk_info (void)
-@end deftypefun
-
-@deftypefun void g_blow_chunks (void)
-Not what you might be thinking, @code{g_blow_chunks()} simply compresses all 
-the chunks. This operation consists of freeing every memory area that should
-be freed (but which we haven't gotten around to doing yet).
-@end deftypefun
-
-@node Timers, Output, Memory, Top
-@comment node-name, next, previous, up
-@chapter Timer functions
-
-@subsection Functions
-
-@deftypefun GTimer* g_timer_new (void)
-@end deftypefun
-
-@deftypefun void g_timer_destroy (GTimer *@var{timer})
-@end deftypefun
-
-@deftypefun void g_timer_start (GTimer *@var{timer})
-@end deftypefun
-
-@deftypefun void g_timer_stop (GTimer *@var{timer})
-@end deftypefun
-
-@deftypefun void g_timer_reset (GTimer *@var{timer})
-@end deftypefun
-
-@deftypefun gdouble g_timer_elapsed (GTimer *@var{timer}, gulong *@var{microseconds})
-@end deftypefun
-
-@node Output, Utilities, Timers, Top
-@comment node-name, next, previous, up
-@chapter Output functions
-
-@subsection Functions
-
-@deftypefun void g_error (gchar *@var{format}, @dots{})
-@end deftypefun
-
-@deftypefun void g_warning (gchar *@var{format}, @dots{})
-@end deftypefun
-
-@deftypefun void g_message (gchar *@var{format}, @dots{})
-@end deftypefun
-
-@deftypefun void g_print (gchar *@var{format}, @dots{})
-@end deftypefun
-
-@node Utilities, Errors, Output, Top
-@comment node-name, next, previous, up
-@chapter Utility functions
-
-@node Errors, String Chunks, Utilities, Top
-@comment node-name, next, previous, up
-@chapter Error handling
-
-@node String Chunks, Strings, Errors, Top
-@comment node-name, next, previous, up
-@chapter String chunks
-
-@node Strings, Resizable arrays, String Chunks, Top
-@comment node-name, next, previous, up
-@chapter String handling
-
-@node Resizable arrays, GScanner, Strings, Top
-@comment node-name, next, previous, up
-@chapter Resizable arrays
-
-@node GScanner, Miscellany, Resizable arrays, Top
-@comment node-name, next, previous, up
-@chapter Flexible lexical scanner
-
-@node Miscellany, Function Index, GScanner, Top
-@comment node-name, next, previous, up
-@chapter Other stuff
-
-@node Function Index, Concept Index, Miscellany, Top
-@comment node-name, next, previous, up
-@unnumbered Function Index
-
-@printindex fn
-
-@node Concept Index, , Function Index, Top
-@comment node-name, next, previous, up
-@unnumbered Concept Index
-
-@printindex cp
-
-@summarycontents
-@contents 
-@bye
-

docs/gtk-config.1.in

@@ -0,0 +1,49 @@
+.TH GTK+ 1 "25 October 1998" Version @VERSION@
+.SH NAME
+gtk-config - script to get information about the installed version of GTK+
+.SH SYNOPSIS
+.B gtk-config
+[\-\-prefix\fI[=DIR]\fP] [\-\-exec\-prefix\fI[=DIR]\fP] [\-\-version] [\-\-libs] [\-\-cflags]
+.SH DESCRIPTION
+.PP
+\fIgtk-config\fP is a tool that is used to configure to determine
+the compiler and linker flags that should be used to compile
+and link programs that use \fIGTK+\fP. It is also used internally
+to the .m4 macros for GNU autoconf that are included with \fIGTK+\fP.
+.
+.SH OPTIONS
+.l
+\fIgtk-config\fP accepts the following options:
+.TP 8
+.B  \-\-version
+Print the currently installed version of \fIGTK+\fP on the standard output.
+.TP 8
+.B  \-\-libs
+Print the linker flags that are necessary to link a \fIGTK+\fP program.
+.TP 8
+.B  \-\-cflags
+Print the compiler flags that are necessary to compile a \fIGTK+\fP program.
+.TP 8
+.B  \-\-prefix=PREFIX
+If specified, use PREFIX instead of the installation prefix that \fIGTK+\fP
+was built with when computing the output for the \-\-cflags and
+\-\-libs options. This option is also used for the exec prefix
+if \-\-exec\-prefix was not specified. This option must be specified
+before any \-\-libs or \-\-cflags options.
+.TP 8
+.B  \-\-exec\-prefix=PREFIX
+If specified, use PREFIX instead of the installation exec prefix that
+\fIGTK+\fP was built with when computing the output for the \-\-cflags
+and \-\-libs options.  This option must be specified before any
+\-\-libs or \-\-cflags options.
+.SH SEE ALSO
+.BR gimp (1),
+.BR gimptool (1)
+.SH COPYRIGHT
+Copyright \(co  1998 Owen Taylor
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation.

docs/gtk-config.txt

@@ -0,0 +1,236 @@
+CONFIGURING PACKAGES TO WORK WITH GTK
+-------------------------------------
+
+Compiling a program succesfully against the GTK, GDK, and GLIB
+libraries can require a large number of command line options
+to your compiler and linker that are hard to guess correctly.
+The additional libraries required may, for example, depend on the
+manner which GTK was configured
+
+Several tools are included in this package to make process
+easier.
+
+First, there is the shell script 'gtk-config' (installed in
+$exec_prefix/bin):
+
+Invoking gtk-config
+-------------------
+
+gtk-config takes the following flags:
+
+  --version
+     Prints out the version of GTK installed
+
+  --cflags
+     Prints '-I' flags pointing to the installed header files.
+
+  --libs
+     Prints out the linker flags necessary to link a program against GTK
+   
+  --prefix[=PREFIX]
+     If PREFIX is specified, overrides the configured value of $prefix.
+     (And of exec-prefix, unless --exec-prefix is also specified)
+     Otherwise, prints out the configured value of $prefix
+
+  --exec-prefix[=PREFIX]
+     If PREFIX is specified, overrides the configured value of $exec_prefix.
+     Otherwise, prints out the configured value of $exec_prefix
+ 
+You may also add to the command line a list of additional
+libraries that gtk-config should supply the CFLAGS and LIBS
+for. The only currently supported library is 'gthread'.
+
+As an example of this latter usage, you can get the
+appropriate cflags for a threaded program with:
+
+ gtk-config --cflags gthread
+
+
+Example of using gtk-config
+---------------------------
+
+Typically, gtk-config will be used within a configure script,
+as described below. It, however, can also be used directly
+from the command line to compile a simple program. For example:
+
+  cc -o simple `gtk-config --cflags` simple.c `gtk-config --libs`
+
+This command line might expand to (for example):
+
+  cc -o simple -I/usr/local/lib/glib/include -I/usr/local/include \
+    -I/usr/X11R6/include simple.c -L/usr/local/lib -L/usr/X11R6/lib \
+    -lgtk -lgdk -lglib -lXi -lXext -lX11 -lm
+
+Not only is the form using gtk-config easier to type, it will
+work on any system, no matter how GTK was configured.
+
+
+AM_PATH_GTK
+-----------
+
+For packages configured using GNU automake, GTK also provides
+a macro to automate the process of running GTK.
+
+ AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+
+This macro:
+
+ * Determines the location of GTK using gtk-config, which is either
+   found in the user's path, or from the environment variable
+   GTK_CONFIG
+
+ * Tests the installed libraries to make sure that there version
+   is later than MINIMUM-VERSION. (A default version will be used
+   if not specified)
+
+ * If the required version was found, sets the GTK_CFLAGS variable to
+   the output of `gtk-config --cflags` and the GTK_LIBS variable to
+   the output of `gtk-config --libs`, and calls AC_SUBST() for these
+   variables so they can be used in generated makefiles, and then
+   executes ACTION-IF-FOUND.
+
+ * If the required version was not found, sets GTK_CFLAGS and GTK_LIBS
+   to empty strings, and executes ACTION-IF-NOT-FOUND.
+
+This macro is in file 'gtk.m4' which is installed in $datadir/aclocal.
+Note that if automake was installed with a different --prefix than
+GTK, you will either have to manually move gtk.m4 to automake's
+$datadir/aclocal, or give aclocal the -I option when running it.
+
+
+Configuring a package that uses AM_PATH_GTK
+-------------------------------------------
+
+Simply make sure that gtk-config is in your path, and run
+the configure script.
+
+Notes:
+
+* The directory where the GTK libraries are installed needs
+  to be found by your system's dynamic linker.
+  
+  This is generally done by
+
+    editing /etc/ld.so.conf and running ldconfig
+
+  Or by:
+   
+    setting the environment variable LD_LIBRARY_PATH, 
+
+  or, as a last resort, 
+ 
+    Giving a -R or -rpath flag (depending on your linker) when
+    running configure, for instance:
+
+      LDFLAGS=-R/usr/home/owen/lib ./configure
+
+* You can also specify a gtk-config not in your path by
+  setting the GTK_CONFIG environment variable to the
+  name of the executable
+
+* If you move the GTK package from its installed location,
+  you will need either need to modify gtk-config script
+  manually to point to the new location or rebuild GTK.
+
+Advanced note:
+
+* configure flags
+  
+  --with-gtk-prefix=PREFIX
+  --with-gtk-exec-prefix=PREFIX 
+
+  are provided to override the prefix and exec-prefix that were stored
+  in the gtk-config shell script by GTK's configure. You are generally
+  better off configuring GTK with the right path to begin with.
+
+Example of a package using AM_PATH_GTK
+--------------------------------------
+
+The following shows how to build a simple package using automake
+and the AM_PATH_GTK macro. The program used here is the testinput.c
+
+You should first read the introductory portions of the automake
+Manual, if you are not already familiar with it.
+
+Two files are needed, 'configure.in', which is used to build the
+configure script:
+
+==configure.in===
+dnl Process this file with autoconf to produce a configure script.
+AC_INIT(testinput.c)
+
+AM_INIT_AUTOMAKE(testinput.c, 1.0.0)
+
+AC_PROG_CC
+AM_PROG_CC_STDC
+AC_PROG_INSTALL
+
+AM_PATH_GTK(0.99.5,
+          [LIBS="$LIBS $GTK_LIBS"
+           CFLAGS="$CFLAGS $GTK_CFLAGS"],
+ 	  AC_MSG_ERROR(Cannot find GTK: Is gtk-config in path?))
+
+AC_OUTPUT(Makefile)
+=================
+
+The only command in this which is not standard for automake
+is the AM_PATH_GTK() macro.
+
+That command does the following:
+
+ If a GTK version greater than 0.99.5 is found, adds $GTK_LIBS to 
+ $LIBS and $GTK_CFLAGS to $CFLAGS. Otherwise, dies with the error
+ message "Cannot find GTK: Is gtk-config in path?"
+
+And the 'Makefile.am', which will be used to build the Makefile.
+
+== Makefile.am ==
+bin_PROGRAMS = testinput
+testinput_SOURCES = testinput.c
+=================
+
+This Makefile.am, says that we are building a single executable,
+from a single sourcefile 'testinput.c'. Since every program
+we are building uses GTK we simply added the GTK options
+to $LIBS and $CFLAGS, but in other circumstances, we might
+want to specify them on a per-program basis: for instance by
+adding the lines:
+
+  testinput_LDADD = $(GTK_LIBS)
+  INCLUDES = $(GTK_CFLAGS)
+
+to the Makefile.am.
+
+To try this example out, create a new directory, add the two
+files above two it, and copy the testinput.c file from 
+the gtk/ subdirectory to the new directory. Edit the line:
+
+  #include "gtk.h"
+
+in testgtk.c, to read:
+
+  #include <gtk/gtk.h>
+
+
+Now execute the following commands:
+
+  automake --add-missing
+  aclocal
+  autoconf
+  
+You now have a package that can be built in the normal fashion
+
+  ./configure
+  make
+  make install
+
+
+Notes:
+
+* If you are converting a package that used a pre-1.0 version of
+  GTK, you should remove the autoconf tests for X. The results
+  of these tests are included in gtk-config and will be added
+  to GTK_LIBS and GTK_CFLAGS by the AM_PATH_GTK macro.
+
+                                        Owen Taylor
+                                        14 Mar 1997

docs/gtkdocs_fix

@@ -1,4 +1,4 @@
-#!/usr/bin/perl -w
+#!/usr/bin/perl
 
 # Stupid script to fix look of html files created with sgml2html...
 
@@ -8,3 +8,4 @@ foreach (@ARGV) {
     system("sed -e 's/<BODY>/<BODY BGCOLOR=\"#FFFFFF\">/g' -e 's/<HR>/<HR NOSHADE>/g' $_.orig > $_");
     unlink("$_.orig");
 }
+

docs/man/gtk_button.pod

@@ -0,0 +1,242 @@
+
+=head1 NAME
+
+gtk_button - GTK+ push button widget
+
+=head1 SYNOPSIS
+
+ #include <gtk/gtkbutton.h>
+
+ GtkType        gtk_button_get_type       (void);
+ GtkWidget*     gtk_button_new            (void);
+ GtkWidget*     gtk_button_new_with_label (const gchar *label);
+ void           gtk_button_pressed        (GtkButton *button);
+ void           gtk_button_released       (GtkButton *button);
+ void           gtk_button_clicked        (GtkButton *button);
+ void           gtk_button_enter          (GtkButton *button);
+ void           gtk_button_leave          (GtkButton *button);
+ void           gtk_button_set_relief     (GtkButton *button,
+                                           GtkReliefStyle style);
+ GtkReliefStyle gtk_button_get_relief     (GtkButton *button);
+
+=head1 DESCRIPTION
+
+This widget is a standard push button widget.  Push button widgets
+are generally used for allowing the user to click on them to initiate
+a command.
+
+This widget is a container widget which contains one child.
+
+=head1 OBJECT HIERARCHY
+
+ gtk_object
+ gtk_widget
+ gtk_container 
+ gtk_button
+
+=head1 SIGNAL PROTOTYPES
+
+ "clicked"	void user_function (GtkWidget *widget, gpointer data);
+ "pressed"	void user_function (GtkWidget *widget, gpointer data);
+ "released"	void user_function (GtkWidget *widget, gpointer data);
+ "enter" 	void user_function (GtkWidget *widget, gpointer data);
+ "leave" 	void user_function (GtkWidget *widget, gpointer data);
+
+=head1 USAGE
+
+=head2 Creation
+
+The most common way to create a button is with a label in it, which
+contains text for the user to read.  The child of the button will then 
+be a L<gtk_label(3)> widget with the text you passwd in.  You can 
+do this in one command:
+
+	GtkWidget *button;
+	button = gtk_button_new_with_label ("This is a button");
+
+To create a gtk_button widget which does not already have a child, 
+use gtk_button_new():
+
+	GtkWidget *button;
+	button = gtk_button_new ();
+
+After you have created a button you can then add a widget to the
+button (such as a label or pixmap) using gtk_container_add().  See
+L<gtk_container(3)> for more information on adding widgets to
+containers.
+
+=head2 Creating a pixmap in a button in a window
+
+After we have an empty gtk_button, such as above, and we have a gtk_pixmap,
+we can simply add the gtk_pixmap to the gtk_button with gtk_container_add().
+
+The following code will open the file "gimp.xpm" and place it in a
+button.
+
+	#include <gtk/gtk.h>
+
+	int main (int argc, char *argv[])
+	{
+	    GtkWidget *window;
+	    GtkWidget *button;
+	    GtkWidget *pixmap;
+	    GtkStyle *style;
+	    GdkPixmap *gdkpixmap;
+	    GdkBitmap *mask;
+	    char *filename = "gimp.xpm";
+
+	    gtk_init (&argc, &argv);
+
+	    window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+
+	    button = gtk_button_new ();
+	    gtk_container_add (GTK_CONTAINER (window), button);
+
+	    /* The button is realized now, which creates button->window
+	       used below to create the pixmap. */
+	    gtk_widget_realize (button);
+
+	    style = gtk_widget_get_style (button);
+	    gdkpixmap = gdk_pixmap_create_from_xpm (button->window, &mask,
+	                                   &style->bg[GTK_STATE_NORMAL],
+					   filename);
+	    pixmap = gtk_pixmap_new (gdkpixmap, mask);
+
+	    gtk_container_add (GTK_CONTAINER (button), pixmap);
+
+	    gtk_widget_show (pixmap);
+	    gtk_widget_show (button);
+	    gtk_widget_show (window);
+
+	    gtk_main ();
+	    return 0;
+	}
+
+=head2 Different reliefs
+
+Reliefs affect how the shadowing of the button is drawn.  The different
+types of relief styles are: 
+
+	GTK_RELIEF_NORMAL
+	GTK_RELIEF_HALF
+	GTK_RELIEF_NONE
+
+When set to a normal relief, the widget looks and acts like a normal
+button.  When half or none relief is used, shadowing is only drawn when the 
+mouse cursor is over the widget.
+
+To set the relief, use gtk_button_set_relief(), like:
+
+	gtk_button_set_relief (button, GTK_RELIEF_HALF);
+
+To get the current relief of a button, use gtk_button_get_relief():
+
+	GtkReliefStyle relief;
+	relief = gtk_button_get_relief (GTK_BUTTON (button));
+
+=head2 Executing a command when the button is pressed
+
+To execute a function when a button is pressed, use
+gtk_signal_connect() to connect to the "clicked" signal.
+
+	gtk_signal_connect (GTK_OBJECT (button), "clicked",
+	                    GTK_SIGNAL_FUNC (user_function),
+			    NULL);
+
+user_function is a user defined function, like the following:
+
+	void user_function (GtkWidget *button, gpointer data)
+	{
+	    printf("clicked\n");
+	}
+
+=head1 FUNCTIONS
+
+GtkType gtk_button_get_type (void);
+
+	This function returns the GtkType which is assigned to the
+	object class for gtk_button.
+
+GtkWidget* gtk_button_new (void);
+
+	This functions returns a new button widget which can then be
+	used as a container for another widget.
+
+GtkWidget* gtk_button_new_with_label (const gchar *label);
+
+	This function returns a new button widget with a label widget
+	as a child.   The label widget will have the text passed into
+	the commant.
+
+void gtk_button_pressed (GtkButton *button);
+
+	This function sends a "pressed" signal to the button.
+
+void gtk_button_released (GtkButton *button);
+
+	This function sends a "released" signal to the button.
+
+void gtk_button_clicked (GtkButton *button);
+
+	This function sends a "clicked" signal to the button.
+
+void gtk_button_enter (GtkButton *button);
+
+	This function sends a "enter" signal to the button.
+
+void gtk_button_leave (GtkButton *button);
+
+	This function sends a "leave" signal to the button.
+
+void gtk_button_set_relief (GtkButton *button, GtkReliefStyle style);
+
+	This function is sets the GtkReliefStyle of the button.  The
+	relief style is one of: GTK_RELIEF_NORMAL, GTK_RELIEF_HALF,
+	or GTK_RELIEF_NONE.  The relief determines when the shadow of
+	the button is drawn.
+
+GtkReliefStyle gtk_button_get_relief (GtkButton *button);
+
+	This function returns the current relief of the button.
+
+=head1 SIGNALS
+
+"clicked"
+
+	void user_function (GtkWidget *widget, gpointer data);
+
+	Gets emitted when the button is clicked. A click is 
+	a press and release of the button when the cursor is
+	inside the button on release.  
+
+"pressed"
+
+	void user_function (GtkWidget *widget, gpointer data);
+
+	Gets emitted when the left mouse button is pressed.
+
+"released"
+
+	void user_function (GtkWidget *widget, gpointer data);
+
+	Gets emitted when the left mouse button is released and
+	the widget was previously pressed.
+
+"enter"
+
+	void user_function (GtkWidget *widget, gpointer data);
+
+	Emitted when the mouse cursor enters the button.
+
+"leave"
+
+	void user_function (GtkWidget *widget, gpointer data);
+
+	Emitted when the mouse cursor leaves the button.
+
+=head1 AUTHORS
+
+The author of this man page is Shawn T. Amundson E<lt>amundson@gtk.orgE<gt>.
+For the authors of GTK+, see the AUTHORS file in the GTK+ distribution.
+
+

docs/package_tutorial.sh

@@ -0,0 +1,99 @@
+#! /bin/sh
+# package_tutorial.sh - Package up the tutorial into various formats
+# Copyright (C) Tony Gale 1999
+# Contact: gale@gtk.org
+#
+# NOTE: This script requires the following to be installed:
+#            o SGML Tools
+#            o Latex
+#            o DVI tools
+
+TARGET=`pwd`/gtk_tut.sgml
+GIFS="`pwd`/*.gif"
+EXAMPLES=`pwd`/../examples
+
+PATH=`pwd`:$PATH
+
+DATE=`date '+%y%m%d'`
+
+# Check top level directory
+if [ ! -d gtk_tutorial ]; then
+  if [ -e gtk_tutorial ]; then
+    echo "ERROR: gtk_tutorial is not a directory"
+    exit
+  fi
+  mkdir gtk_tutorial.$DATE
+fi 
+
+cd gtk_tutorial.$DATE
+
+# SGML Format
+echo -n "Copy SGML and GIF's.... "
+if [ ! -d sgml ]; then
+  if [ -e sgml ]; then
+    echo "ERROR: html is not a directory"
+    exit
+  fi
+  mkdir sgml
+fi
+
+(cd sgml ; cp $TARGET . ; cp $GIFS .)
+echo "done"
+
+# HTML Format
+echo -n "Formatting into HTML.... " 
+if [ ! -d html ]; then
+  if [ -e html ]; then
+    echo "ERROR: html is not a directory"
+    exit
+  fi
+  mkdir html
+fi
+
+(cd html ; sgml2html $TARGET ; cp $GIFS .)
+echo "done"
+
+# Text Format
+echo -n "Formatting into Text.... "
+if [ ! -d txt ]; then
+  if [ -e txt ]; then
+    echo "ERROR: txt is not a directory"
+    exit
+  fi
+  mkdir txt
+fi
+
+(cd txt ; sgml2txt -f $TARGET 2>&1 > /dev/null )
+echo "done"
+
+# PS and DVI Format
+echo -n "Formatting into PS and DVI.... "
+if [ ! -d ps ]; then
+  if [ -e ps ]; then
+    echo "ERROR: ps is not a directory"
+    exit
+  fi
+  mkdir ps
+fi
+
+(cd ps ; sgml2latex --output=ps $TARGET > /dev/null)
+(cd ps ; sgml2latex $TARGET > /dev/null)
+echo "done"
+
+# Copy examples
+echo -n "Copying examples"
+cp -R $EXAMPLES .
+(cd examples ; make clean ; rm -rf CVS */CVS)
+echo "done"
+
+# Package it all up
+echo -n "Creating packages.... "
+cd ..
+tar cvfz gtk_tutorial.$DATE.tar.gz gtk_tutorial.$DATE
+echo "done"
+
+rm -rf gtk_tutorial.$DATE
+
+echo
+echo Package gtk_tutorial.$DATE.tar.gz created.
+echo

docs/refcounting.txt

@@ -15,7 +15,7 @@ functions that follow these conventions:
 GtkObjects also provide the following functions:
 
   *_destroy:  Render an object `unusable', but as long as there are
-              references to it, it's allocated memory will not be freed.
+              references to it, its allocated memory will not be freed.
   *_sink:     Clear a GtkObjects `floating' state and decrement the
 	      reference count by 1.
 
@@ -240,7 +240,7 @@ Taking care of proper referencing
 ---------------------------------
 
 There are some cases where referencing of widgets from outside the toolkit
-(on the application side is needed).
+(on the application side) is needed.
 Once the application performes an operation on a widget that will cause
 its reference count to drop, if it wants to take further actions on the
 widget, it needs to hold a reference to it.
@@ -248,7 +248,7 @@ widget, it needs to hold a reference to it.
 Example code sequences that require reference wraps:
 
    /* gtk_container_remove() will unparent the child and therefore
-    * cause it's reference count to be decremented by one.
+    * cause its reference count to be decremented by one.
     */
    gtk_widget_ref (widget);
    gtk_container_remove (container, widget);

docs/styles.txt

@@ -25,13 +25,17 @@ gtk_widget_set_rc_style ()
   restore the default style otherwise.
   This will override a previously set user style or rc style.
 
+gtk_widget_reset_rc_styles ()
+  Descends through a widget heirarchy and sets the rc style
+  on all widgets that don't have a user style set.
+
 gtk_widget_restore_default_style ()
   Reset the widget's style to the default style, this is only usefull if
   the widgets default style had been saved by previous calls to
   gtk_widget_set_style() or gtk_widget_set_rc_style().
 
 gtk_widget_ensure_style ()
-  Ensure taht the widget either has a user style set, or an rc lookup
+  Ensure that the widget either has a user style set, or an rc lookup
   has been performed.
 
 gtk_rc_get_style ()
@@ -55,7 +59,7 @@ gtk_widget_set_parent ()
   that do not have a user style set.
 
 gtk_style_copy ()
-  This function can be used to copy a widgets style.
+  This function can be used to copy a widget's style.
   The style can subsequntly be changed (e.g., by modifications to the
   red/green/blue values of a certain color) and then be applied to the
   widget via gtk_widget_set_style().
@@ -84,13 +88,13 @@ GtkWidget::style_set
 Flag indications:
 
 !GTK_RC_STYLE && !GTK_USER_STYLE:
-  The widget has it's default style set, no rc lookup has been
+  The widget has its default style set, no rc lookup has been
   performed, the widget has not been size requested yet and is
   therefore not yet realized.
 
 GTK_USER_STYLE:
   GTK_RC_STYLE is not set.
-  The widget has a user style assigned, and it's default style has been
+  The widget has a user style assigned, and its default style has been
   saved.
 
 GTK_RC_STYLE:

docs/text_widget.txt

@@ -398,7 +398,7 @@ according the the tab continuation of the previous line.
 Exposure and drawing:
 
 Exposure is handled from the EXPOSE_TEXT function.  It assumes that
-the LINE_START_CACHE and all it's parameters are accurate and simply
+the LINE_START_CACHE and all its parameters are accurate and simply
 exposes any line which is in the exposure region.  It calls the
 CLEAR_AREA function to clear the background and/or lay down a pixmap
 background.  The text widget has a scrollable pixmap background, which

docs/tutorial/package_tutorial.sh

@@ -0,0 +1,99 @@
+#! /bin/sh
+# package_tutorial.sh - Package up the tutorial into various formats
+# Copyright (C) Tony Gale 1999
+# Contact: gale@gtk.org
+#
+# NOTE: This script requires the following to be installed:
+#            o SGML Tools
+#            o Latex
+#            o DVI tools
+
+TARGET=`pwd`/gtk_tut.sgml
+GIFS="`pwd`/*.gif"
+EXAMPLES=`pwd`/../examples
+
+PATH=`pwd`:$PATH
+
+DATE=`date '+%y%m%d'`
+
+# Check top level directory
+if [ ! -d gtk_tutorial ]; then
+  if [ -e gtk_tutorial ]; then
+    echo "ERROR: gtk_tutorial is not a directory"
+    exit
+  fi
+  mkdir gtk_tutorial.$DATE
+fi 
+
+cd gtk_tutorial.$DATE
+
+# SGML Format
+echo -n "Copy SGML and GIF's.... "
+if [ ! -d sgml ]; then
+  if [ -e sgml ]; then
+    echo "ERROR: html is not a directory"
+    exit
+  fi
+  mkdir sgml
+fi
+
+(cd sgml ; cp $TARGET . ; cp $GIFS .)
+echo "done"
+
+# HTML Format
+echo -n "Formatting into HTML.... " 
+if [ ! -d html ]; then
+  if [ -e html ]; then
+    echo "ERROR: html is not a directory"
+    exit
+  fi
+  mkdir html
+fi
+
+(cd html ; sgml2html $TARGET ; cp $GIFS .)
+echo "done"
+
+# Text Format
+echo -n "Formatting into Text.... "
+if [ ! -d txt ]; then
+  if [ -e txt ]; then
+    echo "ERROR: txt is not a directory"
+    exit
+  fi
+  mkdir txt
+fi
+
+(cd txt ; sgml2txt -f $TARGET 2>&1 > /dev/null )
+echo "done"
+
+# PS and DVI Format
+echo -n "Formatting into PS and DVI.... "
+if [ ! -d ps ]; then
+  if [ -e ps ]; then
+    echo "ERROR: ps is not a directory"
+    exit
+  fi
+  mkdir ps
+fi
+
+(cd ps ; sgml2latex --output=ps $TARGET > /dev/null)
+(cd ps ; sgml2latex $TARGET > /dev/null)
+echo "done"
+
+# Copy examples
+echo -n "Copying examples"
+cp -R $EXAMPLES .
+(cd examples ; make clean ; rm -rf CVS */CVS)
+echo "done"
+
+# Package it all up
+echo -n "Creating packages.... "
+cd ..
+tar cvfz gtk_tutorial.$DATE.tar.gz gtk_tutorial.$DATE
+echo "done"
+
+rm -rf gtk_tutorial.$DATE
+
+echo
+echo Package gtk_tutorial.$DATE.tar.gz created.
+echo

docs/widget_system.txt

@@ -333,8 +333,7 @@ Removing from a container
 When a widget is removed to a container, the container:
 
   1) Calls gtk_widget_unparent (widget)
-  2) Sets widget->parent to NULL
-  3) Queues a resize.
+  2) Queues a resize.
 
 Notes:
 
@@ -378,7 +377,7 @@ The Map signal
 
   1) Set the MAPPED flag
   2) If the widget has any windows, gdk_window_show those windows
-  3) call gtk_widget_map for all child windows that are 
+  3) call gtk_widget_map for all child widgets that are 
      VISIBLE and !MAPPED.
   3) Do any other functions related to putting the widget onscreen.
      (for instance, showing extra popup windows...)
@@ -392,7 +391,7 @@ When a widget receives the unmap signal, it must:
  2) If the widget does not have a window, unmap all child widgets
  3) Do any other functions related to taking the widget offscreen
      (for instance, removing popup windows...)
- 3) Unset GTK_MAPPED
+ 4) Unset GTK_MAPPED
 
 
 The Unrealize signal

examples/Makefile

@@ -0,0 +1,52 @@
+
+SUBDIRS = 	arrow \
+		aspectframe \
+		base \
+		buttonbox \
+		buttons \
+		calendar \
+		clist \
+		entry \
+		eventbox \
+		filesel \
+		fixed \
+		frame \
+		gtkdial \
+		helloworld \
+		helloworld2 \
+		label \
+		list \
+		menu \
+		notebook \
+		packbox \
+		packer \
+		paned \
+		pixmap \
+		progressbar \
+		radiobuttons \
+		rangewidgets \
+		rulers \
+		scribble-simple \
+		scribble-xinput \
+		scrolledwin \
+		selection \
+		spinbutton \
+		statusbar \
+		table \
+		text \
+		tictactoe \
+		tree \
+		wheelbarrow
+
+all:
+	list='$(SUBDIRS)'; \
+	for subdir in $$list; do \
+	  (cd $$subdir && $(MAKE)); \
+	done
+
+clean:
+	list='$(SUBDIRS)'; \
+	for subdir in $$list; do \
+	  (cd $$subdir && $(MAKE) clean); \
+	done
+

examples/README.1ST

@@ -0,0 +1,41 @@
+GTK Example Code - Tony Gale <gale@gtk.org> 980623
+--------------------------------------------------
+
+I have written an awk script to automatically extract the code
+examples from the GTK Tutorial (in sgml), so they only have to be
+changed in one place.
+
+It's called 'extract.awk', and there is a shell wrapper to invoke
+it called 'extract.sh'
+
+It takes the following switches:
+ -c : Just do checking rather than output files
+ -f <filename> : Extract a specific file
+ -d : Extract file(s) to current directory
+
+Without the -d switch, the code will be placed in the appropriate
+sub-directory. Those sub-directories will be created if they do not
+exist.
+
+Without the -f switch, all code examples will be extracted.
+
+The shell wrapper assumes that the GTK Tutorial is in the 
+file "../docs/gtk_tut.sgml"
+
+It works by looking for sections of text in the tutorial surrounded
+by, for example:
+
+/* example-start helloworld helloworld.c */
+
+and
+
+/* example-end */
+
+Where "helloworld" is the directory into which the file will be
+placed (which can also be a directory spec like hello/hello1), and
+"helloworld.c" is the file name for the code.
+
+So, the code between these lines would be extracted to the file
+helloworld/helloworld.c
+
+It also handles replacing the sgml tag '&amp;' with '&'

examples/arrow/Makefile

@@ -0,0 +1,8 @@
+
+CC = gcc
+
+arrow: arrow.c 
+	$(CC) `gtk-config --cflags`  arrow.c -o arrow `gtk-config --libs`
+
+clean: 
+	rm -f *.o arrow

examples/arrow/arrow.c

@@ -0,0 +1,74 @@
+/* example-start arrow arrow.c */
+
+#include <gtk/gtk.h>
+
+/* Create an Arrow widget with the specified parameters
+ * and pack it into a button */
+GtkWidget *create_arrow_button( GtkArrowType  arrow_type,
+				GtkShadowType shadow_type )
+{
+  GtkWidget *button;
+  GtkWidget *arrow;
+
+  button = gtk_button_new();
+  arrow = gtk_arrow_new (arrow_type, shadow_type);
+
+  gtk_container_add (GTK_CONTAINER (button), arrow);
+  
+  gtk_widget_show(button);
+  gtk_widget_show(arrow);
+
+  return(button);
+}
+
+int main( int   argc,
+          char *argv[] )
+{
+  /* GtkWidget is the storage type for widgets */
+  GtkWidget *window;
+  GtkWidget *button;
+  GtkWidget *box;
+
+  /* Initialize the toolkit */
+  gtk_init (&argc, &argv);
+
+  /* Create a new window */
+  window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+
+  gtk_window_set_title (GTK_WINDOW (window), "Arrow Buttons");
+
+  /* It's a good idea to do this for all windows. */
+  gtk_signal_connect (GTK_OBJECT (window), "destroy",
+		      GTK_SIGNAL_FUNC (gtk_main_quit), NULL);
+
+  /* Sets the border width of the window. */
+  gtk_container_set_border_width (GTK_CONTAINER (window), 10);
+
+  /* Create a box to hold the arrows/buttons */
+  box = gtk_hbox_new (FALSE, 0);
+  gtk_container_set_border_width (GTK_CONTAINER (box), 2);
+  gtk_container_add (GTK_CONTAINER (window), box);
+
+  /* Pack and show all our widgets */
+  gtk_widget_show(box);
+
+  button = create_arrow_button(GTK_ARROW_UP, GTK_SHADOW_IN);
+  gtk_box_pack_start (GTK_BOX (box), button, FALSE, FALSE, 3);
+
+  button = create_arrow_button(GTK_ARROW_DOWN, GTK_SHADOW_OUT);
+  gtk_box_pack_start (GTK_BOX (box), button, FALSE, FALSE, 3);
+  
+  button = create_arrow_button(GTK_ARROW_LEFT, GTK_SHADOW_ETCHED_IN);
+  gtk_box_pack_start (GTK_BOX (box), button, FALSE, FALSE, 3);
+  
+  button = create_arrow_button(GTK_ARROW_RIGHT, GTK_SHADOW_ETCHED_OUT);
+  gtk_box_pack_start (GTK_BOX (box), button, FALSE, FALSE, 3);
+  
+  gtk_widget_show (window);
+  
+  /* Rest in gtk_main and wait for the fun to begin! */
+  gtk_main ();
+  
+  return(0);
+}
+/* example-end */

examples/aspectframe/Makefile

@@ -0,0 +1,8 @@
+
+CC = gcc
+
+aspectframe: aspectframe.c 
+	$(CC) `gtk-config --cflags`  aspectframe.c -o aspectframe `gtk-config --libs`
+
+clean: 
+	rm -f *.o aspectframe

examples/aspectframe/aspectframe.c

@@ -0,0 +1,44 @@
+/* example-start aspectframe aspectframe.c */
+
+#include <gtk/gtk.h>
+   
+int main( int argc,
+          char *argv[] )
+{
+    GtkWidget *window;
+    GtkWidget *aspect_frame;
+    GtkWidget *drawing_area;
+    gtk_init (&argc, &argv);
+   
+    window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+    gtk_window_set_title (GTK_WINDOW (window), "Aspect Frame");
+    gtk_signal_connect (GTK_OBJECT (window), "destroy",
+                        GTK_SIGNAL_FUNC (gtk_main_quit), NULL);
+    gtk_container_set_border_width (GTK_CONTAINER (window), 10);
+   
+    /* Create an aspect_frame and add it to our toplevel window */
+   
+    aspect_frame = gtk_aspect_frame_new ("2x1", /* label */
+                                         0.5, /* center x */
+                                         0.5, /* center y */
+                                         2, /* xsize/ysize = 2 */
+                                         FALSE /* ignore child's aspect */);
+   
+    gtk_container_add (GTK_CONTAINER(window), aspect_frame);
+    gtk_widget_show (aspect_frame);
+   
+    /* Now add a child widget to the aspect frame */
+   
+    drawing_area = gtk_drawing_area_new ();
+   
+    /* Ask for a 200x200 window, but the AspectFrame will give us a 200x100
+     * window since we are forcing a 2x1 aspect ratio */
+    gtk_widget_set_usize (drawing_area, 200, 200);
+    gtk_container_add (GTK_CONTAINER(aspect_frame), drawing_area);
+    gtk_widget_show (drawing_area);
+   
+    gtk_widget_show (window);
+    gtk_main ();
+    return 0;
+}
+/* example-end */

examples/base/Makefile

@@ -0,0 +1,8 @@
+
+CC = gcc
+
+base: base.c 
+	$(CC) `gtk-config --cflags`  base.c -o base `gtk-config --libs`
+
+clean: 
+	rm -f *.o base

examples/base/base.c

@@ -0,0 +1,19 @@
+/* example-start base base.c */
+
+#include <gtk/gtk.h>
+
+int main( int   argc,
+          char *argv[] )
+{
+    GtkWidget *window;
+    
+    gtk_init (&argc, &argv);
+    
+    window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+    gtk_widget_show  (window);
+    
+    gtk_main ();
+    
+    return(0);
+}
+/* example-end */

examples/buttonbox/Makefile

@@ -0,0 +1,8 @@
+
+CC = gcc
+
+buttonbox: buttonbox.c 
+	$(CC) `gtk-config --cflags`  buttonbox.c -o buttonbox `gtk-config --libs`
+
+clean: 
+	rm -f *.o buttonbox

examples/buttonbox/buttonbox.c

@@ -0,0 +1,122 @@
+/* example-start buttonbox buttonbox.c */
+
+#include <gtk/gtk.h>
+
+/* Create a Button Box with the specified parameters */
+GtkWidget *create_bbox( gint  horizontal,
+                        char *title,
+                        gint  spacing,
+                        gint  child_w,
+                        gint  child_h,
+                        gint  layout )
+{
+  GtkWidget *frame;
+  GtkWidget *bbox;
+  GtkWidget *button;
+
+  frame = gtk_frame_new (title);
+
+  if (horizontal)
+    bbox = gtk_hbutton_box_new ();
+  else
+    bbox = gtk_vbutton_box_new ();
+
+  gtk_container_set_border_width (GTK_CONTAINER (bbox), 5);
+  gtk_container_add (GTK_CONTAINER (frame), bbox);
+
+  /* Set the appearance of the Button Box */
+  gtk_button_box_set_layout (GTK_BUTTON_BOX (bbox), layout);
+  gtk_button_box_set_spacing (GTK_BUTTON_BOX (bbox), spacing);
+  gtk_button_box_set_child_size (GTK_BUTTON_BOX (bbox), child_w, child_h);
+
+  button = gtk_button_new_with_label ("OK");
+  gtk_container_add (GTK_CONTAINER (bbox), button);
+
+  button = gtk_button_new_with_label ("Cancel");
+  gtk_container_add (GTK_CONTAINER (bbox), button);
+
+  button = gtk_button_new_with_label ("Help");
+  gtk_container_add (GTK_CONTAINER (bbox), button);
+
+  return(frame);
+}
+
+int main( int   argc,
+          char *argv[] )
+{
+  static GtkWidget* window = NULL;
+  GtkWidget *main_vbox;
+  GtkWidget *vbox;
+  GtkWidget *hbox;
+  GtkWidget *frame_horz;
+  GtkWidget *frame_vert;
+
+  /* Initialize GTK */
+  gtk_init( &argc, &argv );
+
+  window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+  gtk_window_set_title (GTK_WINDOW (window), "Button Boxes");
+
+  gtk_signal_connect (GTK_OBJECT (window), "destroy",
+		      GTK_SIGNAL_FUNC(gtk_main_quit),
+		      NULL);
+
+  gtk_container_set_border_width (GTK_CONTAINER (window), 10);
+
+  main_vbox = gtk_vbox_new (FALSE, 0);
+  gtk_container_add (GTK_CONTAINER (window), main_vbox);
+
+  frame_horz = gtk_frame_new ("Horizontal Button Boxes");
+  gtk_box_pack_start (GTK_BOX (main_vbox), frame_horz, TRUE, TRUE, 10);
+
+  vbox = gtk_vbox_new (FALSE, 0);
+  gtk_container_set_border_width (GTK_CONTAINER (vbox), 10);
+  gtk_container_add (GTK_CONTAINER (frame_horz), vbox);
+
+  gtk_box_pack_start (GTK_BOX (vbox),
+	   create_bbox (TRUE, "Spread (spacing 40)", 40, 85, 20, GTK_BUTTONBOX_SPREAD),
+		      TRUE, TRUE, 0);
+
+  gtk_box_pack_start (GTK_BOX (vbox),
+	   create_bbox (TRUE, "Edge (spacing 30)", 30, 85, 20, GTK_BUTTONBOX_EDGE),
+		      TRUE, TRUE, 5);
+
+  gtk_box_pack_start (GTK_BOX (vbox),
+           create_bbox (TRUE, "Start (spacing 20)", 20, 85, 20, GTK_BUTTONBOX_START),
+		      TRUE, TRUE, 5);
+
+  gtk_box_pack_start (GTK_BOX (vbox),
+	   create_bbox (TRUE, "End (spacing 10)", 10, 85, 20, GTK_BUTTONBOX_END),
+		      TRUE, TRUE, 5);
+
+  frame_vert = gtk_frame_new ("Vertical Button Boxes");
+  gtk_box_pack_start (GTK_BOX (main_vbox), frame_vert, TRUE, TRUE, 10);
+
+  hbox = gtk_hbox_new (FALSE, 0);
+  gtk_container_set_border_width (GTK_CONTAINER (hbox), 10);
+  gtk_container_add (GTK_CONTAINER (frame_vert), hbox);
+
+  gtk_box_pack_start (GTK_BOX (hbox),
+           create_bbox (FALSE, "Spread (spacing 5)", 5, 85, 20, GTK_BUTTONBOX_SPREAD),
+		      TRUE, TRUE, 0);
+
+  gtk_box_pack_start (GTK_BOX (hbox),
+           create_bbox (FALSE, "Edge (spacing 30)", 30, 85, 20, GTK_BUTTONBOX_EDGE),
+		      TRUE, TRUE, 5);
+
+  gtk_box_pack_start (GTK_BOX (hbox),
+           create_bbox (FALSE, "Start (spacing 20)", 20, 85, 20, GTK_BUTTONBOX_START),
+		      TRUE, TRUE, 5);
+
+  gtk_box_pack_start (GTK_BOX (hbox),
+           create_bbox (FALSE, "End (spacing 20)", 20, 85, 20, GTK_BUTTONBOX_END),
+		      TRUE, TRUE, 5);
+
+  gtk_widget_show_all (window);
+
+  /* Enter the event loop */
+  gtk_main ();
+    
+  return(0);
+}
+/* example-end */

examples/buttons/Makefile

@@ -0,0 +1,8 @@
+
+CC = gcc
+
+buttons: buttons.c 
+	$(CC) `gtk-config --cflags`  buttons.c -o buttons `gtk-config --libs`
+
+clean: 
+	rm -f *.o buttons

examples/buttons/buttons.c

@@ -0,0 +1,108 @@
+/* example-start buttons buttons.c */
+
+#include <gtk/gtk.h>
+
+/* Create a new hbox with an image and a label packed into it
+ * and return the box. */
+
+GtkWidget *xpm_label_box( GtkWidget *parent,
+                          gchar     *xpm_filename,
+                          gchar     *label_text )
+{
+    GtkWidget *box1;
+    GtkWidget *label;
+    GtkWidget *pixmapwid;
+    GdkPixmap *pixmap;
+    GdkBitmap *mask;
+    GtkStyle *style;
+
+    /* Create box for xpm and label */
+    box1 = gtk_hbox_new (FALSE, 0);
+    gtk_container_set_border_width (GTK_CONTAINER (box1), 2);
+
+    /* Get the style of the button to get the
+     * background color. */
+    style = gtk_widget_get_style(parent);
+
+    /* Now on to the xpm stuff */
+    pixmap = gdk_pixmap_create_from_xpm (parent->window, &mask,
+					 &style->bg[GTK_STATE_NORMAL],
+					 xpm_filename);
+    pixmapwid = gtk_pixmap_new (pixmap, mask);
+
+    /* Create a label for the button */
+    label = gtk_label_new (label_text);
+
+    /* Pack the pixmap and label into the box */
+    gtk_box_pack_start (GTK_BOX (box1),
+			pixmapwid, FALSE, FALSE, 3);
+
+    gtk_box_pack_start (GTK_BOX (box1), label, FALSE, FALSE, 3);
+
+    gtk_widget_show(pixmapwid);
+    gtk_widget_show(label);
+
+    return(box1);
+}
+
+/* Our usual callback function */
+void callback( GtkWidget *widget,
+               gpointer   data )
+{
+    g_print ("Hello again - %s was pressed\n", (char *) data);
+}
+
+
+int main( int   argc,
+          char *argv[] )
+{
+    /* GtkWidget is the storage type for widgets */
+    GtkWidget *window;
+    GtkWidget *button;
+    GtkWidget *box1;
+
+    gtk_init (&argc, &argv);
+
+    /* Create a new window */
+    window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+
+    gtk_window_set_title (GTK_WINDOW (window), "Pixmap'd Buttons!");
+
+    /* It's a good idea to do this for all windows. */
+    gtk_signal_connect (GTK_OBJECT (window), "destroy",
+			GTK_SIGNAL_FUNC (gtk_exit), NULL);
+
+    gtk_signal_connect (GTK_OBJECT (window), "delete_event",
+			GTK_SIGNAL_FUNC (gtk_exit), NULL);
+
+    /* Sets the border width of the window. */
+    gtk_container_set_border_width (GTK_CONTAINER (window), 10);
+    gtk_widget_realize(window);
+
+    /* Create a new button */
+    button = gtk_button_new ();
+
+    /* Connect the "clicked" signal of the button to our callback */
+    gtk_signal_connect (GTK_OBJECT (button), "clicked",
+			GTK_SIGNAL_FUNC (callback), (gpointer) "cool button");
+
+    /* This calls our box creating function */
+    box1 = xpm_label_box(window, "info.xpm", "cool button");
+
+    /* Pack and show all our widgets */
+    gtk_widget_show(box1);
+
+    gtk_container_add (GTK_CONTAINER (button), box1);
+
+    gtk_widget_show(button);
+
+    gtk_container_add (GTK_CONTAINER (window), button);
+
+    gtk_widget_show (window);
+
+    /* Rest in gtk_main and wait for the fun to begin! */
+    gtk_main ();
+
+    return(0);
+}
+/* example-end */

examples/buttons/info.xpm

@@ -0,0 +1,92 @@
+/* XPM */
+static char *openfile[] = {
+/* width height num_colors chars_per_pixel */
+"    20    19       66            2",
+/* colors */
+".. c None",
+".# c #000000",
+".a c #dfdfdf",
+".b c #7f7f7f",
+".c c #006f6f",
+".d c #00efef",
+".e c #009f9f",
+".f c #004040",
+".g c #00bfbf",
+".h c #ff0000",
+".i c #ffffff",
+".j c #7f0000",
+".k c #007070",
+".l c #00ffff",
+".m c #00a0a0",
+".n c #004f4f",
+".o c #00cfcf",
+".p c #8f8f8f",
+".q c #6f6f6f",
+".r c #a0a0a0",
+".s c #7f7f00",
+".t c #007f7f",
+".u c #5f5f5f",
+".v c #707070",
+".w c #00f0f0",
+".x c #009090",
+".y c #ffff00",
+".z c #0000ff",
+".A c #00afaf",
+".B c #00d0d0",
+".C c #00dfdf",
+".D c #005f5f",
+".E c #00b0b0",
+".F c #001010",
+".G c #00c0c0",
+".H c #000f0f",
+".I c #00007f",
+".J c #005050",
+".K c #002f2f",
+".L c #dfcfcf",
+".M c #dfd0d0",
+".N c #006060",
+".O c #00e0e0",
+".P c #00ff00",
+".Q c #002020",
+".R c #dfc0c0",
+".S c #008080",
+".T c #001f1f",
+".U c #003f3f",
+".V c #007f00",
+".W c #00000f",
+".X c #000010",
+".Y c #00001f",
+".Z c #000020",
+".0 c #00002f",
+".1 c #000030",
+".2 c #00003f",
+".3 c #000040",
+".4 c #00004f",
+".5 c #000050",
+".6 c #00005f",
+".7 c #000060",
+".8 c #00006f",
+".9 c #000070",
+"#. c #7f7f80",
+"## c #9f9f9f",
+/* pixels */
+"........................................",
+"........................................",
+"........................................",
+".......................#.#.#............",
+".....................#.......#...#......",
+"...............................#.#......",
+".......#.#.#.................#.#.#......",
+".....#.y.i.y.#.#.#.#.#.#.#..............",
+".....#.i.y.i.y.i.y.i.y.i.#..............",
+".....#.y.i.y.i.y.i.y.i.y.#..............",
+".....#.i.y.i.y.#.#.#.#.#.#.#.#.#.#.#....",
+".....#.y.i.y.#.s.s.s.s.s.s.s.s.s.#......",
+".....#.i.y.#.s.s.s.s.s.s.s.s.s.#........",
+".....#.y.#.s.s.s.s.s.s.s.s.s.#..........",
+".....#.#.s.s.s.s.s.s.s.s.s.#............",
+".....#.#.#.#.#.#.#.#.#.#.#..............",
+"........................................",
+"........................................",
+"........................................"
+};

examples/calendar/Makefile

@@ -0,0 +1,8 @@
+
+CC = gcc
+
+calendar: calendar.c
+	$(CC) `gtk-config --cflags` calendar.c -o calendar `gtk-config --libs`
+
+clean: 
+	rm -f calendar

examples/calendar/calendar.c

@@ -0,0 +1,424 @@
+/* example-start calendar calendar.c */
+/*
+ * Copyright (C) 1998 Cesar Miquel, Shawn T. Amundson, Mattias Grönlund
+ * Copyright (C) 2000 Tony Gale
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+
+#define DEF_PAD 10
+#define DEF_PAD_SMALL 5
+
+#define TM_YEAR_BASE 1900
+
+typedef struct _CalendarData {
+  GtkWidget *flag_checkboxes[5];
+  gboolean  settings[5];
+  gchar     *font;
+  GtkWidget *font_dialog;
+  GtkWidget *window;
+  GtkWidget *prev2_sig;
+  GtkWidget *prev_sig;
+  GtkWidget *last_sig;
+  GtkWidget *month;
+} CalendarData;
+
+enum {
+  calendar_show_header,
+  calendar_show_days,
+  calendar_month_change, 
+  calendar_show_week,
+  calendar_monday_first
+};
+
+/*
+ * GtkCalendar
+ */
+
+void calendar_date_to_string( CalendarData *data,
+			      char         *buffer,
+			      gint          buff_len )
+{
+  struct tm tm;
+  time_t time;
+
+  memset (&tm, 0, sizeof (tm));
+  gtk_calendar_get_date (GTK_CALENDAR(data->window),
+			 &tm.tm_year, &tm.tm_mon, &tm.tm_mday);
+  tm.tm_year -= TM_YEAR_BASE;
+  time = mktime(&tm);
+  strftime (buffer, buff_len-1, "%x", gmtime(&time));
+}
+
+void calendar_set_signal_strings( char         *sig_str,
+				  CalendarData *data)
+{
+  gchar *prev_sig;
+
+  gtk_label_get (GTK_LABEL (data->prev_sig), &prev_sig);
+  gtk_label_set (GTK_LABEL (data->prev2_sig), prev_sig);
+
+  gtk_label_get (GTK_LABEL (data->last_sig), &prev_sig);
+  gtk_label_set (GTK_LABEL (data->prev_sig), prev_sig);
+  gtk_label_set (GTK_LABEL (data->last_sig), sig_str);
+}
+
+void calendar_month_changed( GtkWidget    *widget,
+                             CalendarData *data )
+{
+  char buffer[256] = "month_changed: ";
+
+  calendar_date_to_string (data, buffer+15, 256-15);
+  calendar_set_signal_strings (buffer, data);
+}
+
+void calendar_day_selected( GtkWidget    *widget,
+                            CalendarData *data )
+{
+  char buffer[256] = "day_selected: ";
+
+  calendar_date_to_string (data, buffer+14, 256-14);
+  calendar_set_signal_strings (buffer, data);
+}
+
+void calendar_day_selected_double_click( GtkWidget    *widget,
+                                         CalendarData *data )
+{
+  struct tm tm;
+  char buffer[256] = "day_selected_double_click: ";
+
+  calendar_date_to_string (data, buffer+27, 256-27);
+  calendar_set_signal_strings (buffer, data);
+
+  memset (&tm, 0, sizeof (tm));
+  gtk_calendar_get_date (GTK_CALENDAR(data->window),
+			 &tm.tm_year, &tm.tm_mon, &tm.tm_mday);
+  tm.tm_year -= TM_YEAR_BASE;
+
+  if(GTK_CALENDAR(data->window)->marked_date[tm.tm_mday-1] == 0) {
+    gtk_calendar_mark_day(GTK_CALENDAR(data->window),tm.tm_mday);
+  } else { 
+    gtk_calendar_unmark_day(GTK_CALENDAR(data->window),tm.tm_mday);
+  }
+}
+
+void calendar_prev_month( GtkWidget    *widget,
+                            CalendarData *data )
+{
+  char buffer[256] = "prev_month: ";
+
+  calendar_date_to_string (data, buffer+12, 256-12);
+  calendar_set_signal_strings (buffer, data);
+}
+
+void calendar_next_month( GtkWidget    *widget,
+                            CalendarData *data )
+{
+  char buffer[256] = "next_month: ";
+
+  calendar_date_to_string (data, buffer+12, 256-12);
+  calendar_set_signal_strings (buffer, data);
+}
+
+void calendar_prev_year( GtkWidget    *widget,
+                            CalendarData *data )
+{
+  char buffer[256] = "prev_year: ";
+
+  calendar_date_to_string (data, buffer+11, 256-11);
+  calendar_set_signal_strings (buffer, data);
+}
+
+void calendar_next_year( GtkWidget    *widget,
+                            CalendarData *data )
+{
+  char buffer[256] = "next_year: ";
+
+  calendar_date_to_string (data, buffer+11, 256-11);
+  calendar_set_signal_strings (buffer, data);
+}
+
+
+void calendar_set_flags( CalendarData *calendar )
+{
+  gint i;
+  gint options=0;
+  for (i=0;i<5;i++) 
+    if (calendar->settings[i])
+      {
+	options=options + (1<<i);
+      }
+  if (calendar->window)
+    gtk_calendar_display_options (GTK_CALENDAR (calendar->window), options);
+}
+
+void calendar_toggle_flag( GtkWidget    *toggle,
+                           CalendarData *calendar )
+{
+  gint i;
+  gint j;
+  j=0;
+  for (i=0; i<5; i++)
+    if (calendar->flag_checkboxes[i] == toggle)
+      j = i;
+
+  calendar->settings[j]=!calendar->settings[j];
+  calendar_set_flags(calendar);
+  
+}
+
+void calendar_font_selection_ok( GtkWidget    *button,
+                                 CalendarData *calendar )
+{
+  GtkStyle *style;
+  GdkFont  *font;
+
+  calendar->font = gtk_font_selection_dialog_get_font_name(
+			GTK_FONT_SELECTION_DIALOG (calendar->font_dialog));
+  if (calendar->window)
+    {
+      font = gtk_font_selection_dialog_get_font(GTK_FONT_SELECTION_DIALOG(calendar->font_dialog));
+      if (font) 
+	{
+	  style = gtk_style_copy (gtk_widget_get_style (calendar->window));
+	  gdk_font_unref (style->font);
+	  style->font = font;
+	  gdk_font_ref (style->font);
+	  gtk_widget_set_style (calendar->window, style);
+	}
+    }
+}
+
+void calendar_select_font( GtkWidget    *button,
+                           CalendarData *calendar )
+{
+  GtkWidget *window;
+
+  if (!calendar->font_dialog) {
+    window = gtk_font_selection_dialog_new ("Font Selection Dialog");
+    g_return_if_fail(GTK_IS_FONT_SELECTION_DIALOG(window));
+    calendar->font_dialog = window;
+    
+    gtk_window_position (GTK_WINDOW (window), GTK_WIN_POS_MOUSE);
+    
+    gtk_signal_connect (GTK_OBJECT (window), "destroy",
+			GTK_SIGNAL_FUNC (gtk_widget_destroyed),
+			&calendar->font_dialog);
+    
+    gtk_signal_connect (GTK_OBJECT (GTK_FONT_SELECTION_DIALOG (window)->ok_button),
+			"clicked", GTK_SIGNAL_FUNC(calendar_font_selection_ok),
+			calendar);
+    gtk_signal_connect_object (GTK_OBJECT (GTK_FONT_SELECTION_DIALOG (window)->cancel_button),
+			       "clicked",
+			       GTK_SIGNAL_FUNC (gtk_widget_destroy), 
+			       GTK_OBJECT (calendar->font_dialog));
+  }
+  window=calendar->font_dialog;
+  if (!GTK_WIDGET_VISIBLE (window))
+    gtk_widget_show (window);
+  else
+    gtk_widget_destroy (window);
+
+}
+
+void create_calendar()
+{
+  GtkWidget *window;
+  GtkWidget *vbox, *vbox2, *vbox3;
+  GtkWidget *hbox;
+  GtkWidget *hbbox;
+  GtkWidget *calendar;
+  GtkWidget *toggle;
+  GtkWidget *button;
+  GtkWidget *frame;
+  GtkWidget *separator;
+  GtkWidget *label;
+  GtkWidget *bbox;
+  static CalendarData calendar_data;
+  gint i;
+  
+  struct {
+    char *label;
+  } flags[] =
+    {
+      { "Show Heading" },
+      { "Show Day Names" },
+      { "No Month Change" },
+      { "Show Week Numbers" },
+      { "Week Start Monday" }
+    };
+
+  
+  calendar_data.window = NULL;
+  calendar_data.font = NULL;
+  calendar_data.font_dialog = NULL;
+
+  for (i=0; i<5; i++) {
+    calendar_data.settings[i]=0;
+  }
+
+  window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+  gtk_window_set_title(GTK_WINDOW(window), "GtkCalendar Example");
+  gtk_container_border_width (GTK_CONTAINER (window), 5);
+  gtk_signal_connect(GTK_OBJECT(window), "destroy",
+		     GTK_SIGNAL_FUNC(gtk_main_quit),
+		     NULL);
+  gtk_signal_connect(GTK_OBJECT(window), "delete-event",
+		     GTK_SIGNAL_FUNC(gtk_false),
+		     NULL);
+
+  gtk_window_set_policy(GTK_WINDOW(window), FALSE, FALSE, TRUE);
+
+  vbox = gtk_vbox_new(FALSE, DEF_PAD);
+  gtk_container_add (GTK_CONTAINER (window), vbox);
+
+  /*
+   * The top part of the window, Calendar, flags and fontsel.
+   */
+
+  hbox = gtk_hbox_new(FALSE, DEF_PAD);
+  gtk_box_pack_start (GTK_BOX(vbox), hbox, TRUE, TRUE, DEF_PAD);
+  hbbox = gtk_hbutton_box_new();
+  gtk_box_pack_start(GTK_BOX(hbox), hbbox, FALSE, FALSE, DEF_PAD);
+  gtk_button_box_set_layout(GTK_BUTTON_BOX(hbbox), GTK_BUTTONBOX_SPREAD);
+  gtk_button_box_set_spacing(GTK_BUTTON_BOX(hbbox), 5);
+
+  /* Calendar widget */
+  frame = gtk_frame_new("Calendar");
+  gtk_box_pack_start(GTK_BOX(hbbox), frame, FALSE, TRUE, DEF_PAD);
+  calendar=gtk_calendar_new();
+  calendar_data.window = calendar;
+  calendar_set_flags(&calendar_data);
+  gtk_calendar_mark_day ( GTK_CALENDAR(calendar), 19);	
+  gtk_container_add( GTK_CONTAINER( frame), calendar);
+  gtk_signal_connect (GTK_OBJECT (calendar), "month_changed", 
+                      GTK_SIGNAL_FUNC (calendar_month_changed),
+		      &calendar_data);
+  gtk_signal_connect (GTK_OBJECT (calendar), "day_selected", 
+                      GTK_SIGNAL_FUNC (calendar_day_selected),
+		      &calendar_data);
+  gtk_signal_connect (GTK_OBJECT (calendar), "day_selected_double_click", 
+                      GTK_SIGNAL_FUNC (calendar_day_selected_double_click),
+		      &calendar_data);
+  gtk_signal_connect (GTK_OBJECT (calendar), "prev_month", 
+                      GTK_SIGNAL_FUNC (calendar_prev_month),
+		      &calendar_data);
+  gtk_signal_connect (GTK_OBJECT (calendar), "next_month", 
+                      GTK_SIGNAL_FUNC (calendar_next_month),
+		      &calendar_data);
+  gtk_signal_connect (GTK_OBJECT (calendar), "prev_year", 
+                      GTK_SIGNAL_FUNC (calendar_prev_year),
+		      &calendar_data);
+  gtk_signal_connect (GTK_OBJECT (calendar), "next_year", 
+                      GTK_SIGNAL_FUNC (calendar_next_year),
+		      &calendar_data);
+
+
+  separator = gtk_vseparator_new ();
+  gtk_box_pack_start (GTK_BOX (hbox), separator, FALSE, TRUE, 0);
+
+  vbox2 = gtk_vbox_new(FALSE, DEF_PAD);
+  gtk_box_pack_start(GTK_BOX(hbox), vbox2, FALSE, FALSE, DEF_PAD);
+  
+  /* Build the Right frame with the flags in */ 
+
+  frame = gtk_frame_new("Flags");
+  gtk_box_pack_start(GTK_BOX(vbox2), frame, TRUE, TRUE, DEF_PAD);
+  vbox3 = gtk_vbox_new(TRUE, DEF_PAD_SMALL);
+  gtk_container_add(GTK_CONTAINER(frame), vbox3);
+
+  for (i = 0; i < 5; i++)
+    {
+      toggle = gtk_check_button_new_with_label(flags[i].label);
+      gtk_signal_connect (GTK_OBJECT (toggle),
+			    "toggled",
+			    GTK_SIGNAL_FUNC(calendar_toggle_flag),
+			    &calendar_data);
+      gtk_box_pack_start (GTK_BOX (vbox3), toggle, TRUE, TRUE, 0);
+      calendar_data.flag_checkboxes[i]=toggle;
+    }
+  /* Build the right font-button */ 
+  button = gtk_button_new_with_label("Font...");
+  gtk_signal_connect (GTK_OBJECT (button),
+		      "clicked",
+		      GTK_SIGNAL_FUNC(calendar_select_font),
+		      &calendar_data);
+  gtk_box_pack_start (GTK_BOX (vbox2), button, FALSE, FALSE, 0);
+
+  /*
+   *  Build the Signal-event part.
+   */
+
+  frame = gtk_frame_new("Signal events");
+  gtk_box_pack_start(GTK_BOX(vbox), frame, TRUE, TRUE, DEF_PAD);
+
+  vbox2 = gtk_vbox_new(TRUE, DEF_PAD_SMALL);
+  gtk_container_add(GTK_CONTAINER(frame), vbox2);
+  
+  hbox = gtk_hbox_new (FALSE, 3);
+  gtk_box_pack_start (GTK_BOX (vbox2), hbox, FALSE, TRUE, 0);
+  label = gtk_label_new ("Signal:");
+  gtk_box_pack_start (GTK_BOX (hbox), label, FALSE, TRUE, 0);
+  calendar_data.last_sig = gtk_label_new ("");
+  gtk_box_pack_start (GTK_BOX (hbox), calendar_data.last_sig, FALSE, TRUE, 0);
+
+  hbox = gtk_hbox_new (FALSE, 3);
+  gtk_box_pack_start (GTK_BOX (vbox2), hbox, FALSE, TRUE, 0);
+  label = gtk_label_new ("Previous signal:");
+  gtk_box_pack_start (GTK_BOX (hbox), label, FALSE, TRUE, 0);
+  calendar_data.prev_sig = gtk_label_new ("");
+  gtk_box_pack_start (GTK_BOX (hbox), calendar_data.prev_sig, FALSE, TRUE, 0);
+
+  hbox = gtk_hbox_new (FALSE, 3);
+  gtk_box_pack_start (GTK_BOX (vbox2), hbox, FALSE, TRUE, 0);
+  label = gtk_label_new ("Second previous signal:");
+  gtk_box_pack_start (GTK_BOX (hbox), label, FALSE, TRUE, 0);
+  calendar_data.prev2_sig = gtk_label_new ("");
+  gtk_box_pack_start (GTK_BOX (hbox), calendar_data.prev2_sig, FALSE, TRUE, 0);
+
+  bbox = gtk_hbutton_box_new ();
+  gtk_box_pack_start (GTK_BOX (vbox), bbox, FALSE, FALSE, 0);
+  gtk_button_box_set_layout(GTK_BUTTON_BOX(bbox), GTK_BUTTONBOX_END);
+
+  button = gtk_button_new_with_label ("Close");
+  gtk_signal_connect (GTK_OBJECT (button), "clicked", 
+		      GTK_SIGNAL_FUNC (gtk_main_quit), 
+		      NULL);
+  gtk_container_add (GTK_CONTAINER (bbox), button);
+  GTK_WIDGET_SET_FLAGS (button, GTK_CAN_DEFAULT);
+  gtk_widget_grab_default (button);
+
+  gtk_widget_show_all(window);
+}
+
+
+int main(int   argc,
+         char *argv[] )
+{
+  gtk_set_locale ();
+  gtk_init (&argc, &argv);
+
+  create_calendar();
+
+  gtk_main();
+
+  return(0);
+}
+/* example-end */

examples/clist/Makefile

@@ -0,0 +1,8 @@
+
+CC = gcc
+
+clist: clist.c 
+	$(CC) `gtk-config --cflags`  clist.c -o clist `gtk-config --libs`
+
+clean: 
+	rm -f *.o clist

examples/clist/clist.c

@@ -0,0 +1,174 @@
+/* example-start clist clist.c */
+
+#include <gtk/gtk.h>
+
+/* User clicked the "Add List" button. */
+void button_add_clicked( gpointer data )
+{
+    int indx;
+ 
+    /* Something silly to add to the list. 4 rows of 2 columns each */
+    gchar *drink[4][2] = { { "Milk",    "3 Oz" },
+                           { "Water",   "6 l" },
+                           { "Carrots", "2" },
+                           { "Snakes",  "55" } };
+
+    /* Here we do the actual adding of the text. It's done once for
+     * each row.
+     */
+    for ( indx=0 ; indx < 4 ; indx++ )
+	gtk_clist_append( (GtkCList *) data, drink[indx]);
+
+    return;
+}
+
+/* User clicked the "Clear List" button. */
+void button_clear_clicked( gpointer data )
+{
+    /* Clear the list using gtk_clist_clear. This is much faster than
+     * calling gtk_clist_remove once for each row.
+     */
+    gtk_clist_clear( (GtkCList *) data);
+
+    return;
+}
+
+/* The user clicked the "Hide/Show titles" button. */
+void button_hide_show_clicked( gpointer data )
+{
+    /* Just a flag to remember the status. 0 = currently visible */
+    static short int flag = 0;
+
+    if (flag == 0)
+    {
+        /* Hide the titles and set the flag to 1 */
+	gtk_clist_column_titles_hide((GtkCList *) data);
+	flag++;
+    }
+    else
+    {
+        /* Show the titles and reset flag to 0 */
+	gtk_clist_column_titles_show((GtkCList *) data);
+	flag--;
+    }
+
+    return;
+}
+
+/* If we come here, then the user has selected a row in the list. */
+void selection_made( GtkWidget      *clist,
+                     gint            row,
+                     gint            column,
+		     GdkEventButton *event,
+                     gpointer        data )
+{
+    gchar *text;
+
+    /* Get the text that is stored in the selected row and column
+     * which was clicked in. We will receive it as a pointer in the
+     * argument text.
+     */
+    gtk_clist_get_text(GTK_CLIST(clist), row, column, &text);
+
+    /* Just prints some information about the selected row */
+    g_print("You selected row %d. More specifically you clicked in "
+            "column %d, and the text in this cell is %s\n\n",
+	    row, column, text);
+
+    return;
+}
+
+int main( int    argc,
+          gchar *argv[] )
+{                                  
+    GtkWidget *window;
+    GtkWidget *vbox, *hbox;
+    GtkWidget *scrolled_window, *clist;
+    GtkWidget *button_add, *button_clear, *button_hide_show;    
+    gchar *titles[2] = { "Ingredients", "Amount" };
+
+    gtk_init(&argc, &argv);
+    
+    window=gtk_window_new(GTK_WINDOW_TOPLEVEL);
+    gtk_widget_set_usize(GTK_WIDGET(window), 300, 150);
+
+    gtk_window_set_title(GTK_WINDOW(window), "GtkCList Example");
+    gtk_signal_connect(GTK_OBJECT(window),
+		       "destroy",
+		       GTK_SIGNAL_FUNC(gtk_main_quit),
+		       NULL);
+    
+    vbox=gtk_vbox_new(FALSE, 5);
+    gtk_container_set_border_width(GTK_CONTAINER(vbox), 5);
+    gtk_container_add(GTK_CONTAINER(window), vbox);
+    gtk_widget_show(vbox);
+    
+    /* Create a scrolled window to pack the CList widget into */
+    scrolled_window = gtk_scrolled_window_new (NULL, NULL);
+    gtk_scrolled_window_set_policy (GTK_SCROLLED_WINDOW (scrolled_window),
+                                    GTK_POLICY_AUTOMATIC, GTK_POLICY_ALWAYS);
+
+    gtk_box_pack_start(GTK_BOX(vbox), scrolled_window, TRUE, TRUE, 0);
+    gtk_widget_show (scrolled_window);
+
+    /* Create the CList. For this example we use 2 columns */
+    clist = gtk_clist_new_with_titles( 2, titles);
+
+    /* When a selection is made, we want to know about it. The callback
+     * used is selection_made, and its code can be found further down */
+    gtk_signal_connect(GTK_OBJECT(clist), "select_row",
+		       GTK_SIGNAL_FUNC(selection_made),
+		       NULL);
+
+    /* It isn't necessary to shadow the border, but it looks nice :) */
+    gtk_clist_set_shadow_type (GTK_CLIST(clist), GTK_SHADOW_OUT);
+
+    /* What however is important, is that we set the column widths as
+     * they will never be right otherwise. Note that the columns are
+     * numbered from 0 and up (to 1 in this case).
+     */
+    gtk_clist_set_column_width (GTK_CLIST(clist), 0, 150);
+
+    /* Add the CList widget to the vertical box and show it. */
+    gtk_container_add(GTK_CONTAINER(scrolled_window), clist);
+    gtk_widget_show(clist);
+
+    /* Create the buttons and add them to the window. See the button
+     * tutorial for more examples and comments on this.
+     */
+    hbox = gtk_hbox_new(FALSE, 0);
+    gtk_box_pack_start(GTK_BOX(vbox), hbox, FALSE, TRUE, 0);
+    gtk_widget_show(hbox);
+
+    button_add = gtk_button_new_with_label("Add List");
+    button_clear = gtk_button_new_with_label("Clear List");
+    button_hide_show = gtk_button_new_with_label("Hide/Show titles");
+
+    gtk_box_pack_start(GTK_BOX(hbox), button_add, TRUE, TRUE, 0);
+    gtk_box_pack_start(GTK_BOX(hbox), button_clear, TRUE, TRUE, 0);
+    gtk_box_pack_start(GTK_BOX(hbox), button_hide_show, TRUE, TRUE, 0);
+
+    /* Connect our callbacks to the three buttons */
+    gtk_signal_connect_object(GTK_OBJECT(button_add), "clicked",
+			      GTK_SIGNAL_FUNC(button_add_clicked),
+			      (gpointer) clist);
+    gtk_signal_connect_object(GTK_OBJECT(button_clear), "clicked",
+			      GTK_SIGNAL_FUNC(button_clear_clicked),
+			      (gpointer) clist);
+    gtk_signal_connect_object(GTK_OBJECT(button_hide_show), "clicked",
+			      GTK_SIGNAL_FUNC(button_hide_show_clicked),
+			      (gpointer) clist);
+
+    gtk_widget_show(button_add);
+    gtk_widget_show(button_clear);
+    gtk_widget_show(button_hide_show);
+
+    /* The interface is completely set up so we show the window and
+     * enter the gtk_main loop.
+     */
+    gtk_widget_show(window);
+    gtk_main();
+    
+    return(0);
+}
+/* example-end */

examples/entry/Makefile

@@ -0,0 +1,8 @@
+
+CC = gcc
+
+entry: entry.c 
+	$(CC) `gtk-config --cflags`  entry.c -o entry `gtk-config --libs`
+
+clean: 
+	rm -f *.o entry

examples/entry/entry.c

@@ -0,0 +1,93 @@
+/* example-start entry entry.c */
+
+#include <gtk/gtk.h>
+
+void enter_callback( GtkWidget *widget,
+                     GtkWidget *entry )
+{
+  gchar *entry_text;
+  entry_text = gtk_entry_get_text(GTK_ENTRY(entry));
+  printf("Entry contents: %s\n", entry_text);
+}
+
+void entry_toggle_editable( GtkWidget *checkbutton,
+                            GtkWidget *entry )
+{
+  gtk_entry_set_editable(GTK_ENTRY(entry),
+			 GTK_TOGGLE_BUTTON(checkbutton)->active);
+}
+
+void entry_toggle_visibility( GtkWidget *checkbutton,
+                              GtkWidget *entry )
+{
+  gtk_entry_set_visibility(GTK_ENTRY(entry),
+			 GTK_TOGGLE_BUTTON(checkbutton)->active);
+}
+
+int main( int   argc,
+          char *argv[] )
+{
+
+    GtkWidget *window;
+    GtkWidget *vbox, *hbox;
+    GtkWidget *entry;
+    GtkWidget *button;
+    GtkWidget *check;
+
+    gtk_init (&argc, &argv);
+
+    /* create a new window */
+    window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
+    gtk_widget_set_usize( GTK_WIDGET (window), 200, 100);
+    gtk_window_set_title(GTK_WINDOW (window), "GTK Entry");
+    gtk_signal_connect(GTK_OBJECT (window), "delete_event",
+                       (GtkSignalFunc) gtk_exit, NULL);
+
+    vbox = gtk_vbox_new (FALSE, 0);
+    gtk_container_add (GTK_CONTAINER (window), vbox);
+    gtk_widget_show (vbox);
+
+    entry = gtk_entry_new_with_max_length (50);
+    gtk_signal_connect(GTK_OBJECT(entry), "activate",
+		       GTK_SIGNAL_FUNC(enter_callback),
+		       entry);
+    gtk_entry_set_text (GTK_ENTRY (entry), "hello");
+    gtk_entry_append_text (GTK_ENTRY (entry), " world");
+    gtk_entry_select_region (GTK_ENTRY (entry),
+			     0, GTK_ENTRY(entry)->text_length);
+    gtk_box_pack_start (GTK_BOX (vbox), entry, TRUE, TRUE, 0);
+    gtk_widget_show (entry);
+
+    hbox = gtk_hbox_new (FALSE, 0);
+    gtk_container_add (GTK_CONTAINER (vbox), hbox);
+    gtk_widget_show (hbox);
+                                  
+    check = gtk_check_button_new_with_label("Editable");
+    gtk_box_pack_start (GTK_BOX (hbox), check, TRUE, TRUE, 0);
+    gtk_signal_connect (GTK_OBJECT(check), "toggled",
+			GTK_SIGNAL_FUNC(entry_toggle_editable), entry);
+    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(check), TRUE);
+    gtk_widget_show (check);
+    
+    check = gtk_check_button_new_with_label("Visible");
+    gtk_box_pack_start (GTK_BOX (hbox), check, TRUE, TRUE, 0);
+    gtk_signal_connect (GTK_OBJECT(check), "toggled",
+			GTK_SIGNAL_FUNC(entry_toggle_visibility), entry);
+    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(check), TRUE);
+    gtk_widget_show (check);
+                                   
+    button = gtk_button_new_with_label ("Close");
+    gtk_signal_connect_object (GTK_OBJECT (button), "clicked",
+			       GTK_SIGNAL_FUNC(gtk_exit),
+			       GTK_OBJECT (window));
+    gtk_box_pack_start (GTK_BOX (vbox), button, TRUE, TRUE, 0);
+    GTK_WIDGET_SET_FLAGS (button, GTK_CAN_DEFAULT);
+    gtk_widget_grab_default (button);
+    gtk_widget_show (button);
+    
+    gtk_widget_show(window);
+
+    gtk_main();
+    return(0);
+}
+/* example-end */

examples/eventbox/Makefile

@@ -0,0 +1,8 @@
+
+CC = gcc
+
+eventbox: eventbox.c 
+	$(CC) `gtk-config --cflags`  eventbox.c -o eventbox `gtk-config --libs`
+
+clean: 
+	rm -f *.o eventbox

examples/eventbox/eventbox.c

@@ -0,0 +1,54 @@
+/* example-start eventbox eventbox.c */
+
+#include <gtk/gtk.h>
+
+int main( int argc,
+          char *argv[] )
+{
+    GtkWidget *window;
+    GtkWidget *event_box;
+    GtkWidget *label;
+    
+    gtk_init (&argc, &argv);
+    
+    window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+    
+    gtk_window_set_title (GTK_WINDOW (window), "Event Box");
+    
+    gtk_signal_connect (GTK_OBJECT (window), "destroy",
+			GTK_SIGNAL_FUNC (gtk_exit), NULL);
+    
+    gtk_container_set_border_width (GTK_CONTAINER (window), 10);
+    
+    /* Create an EventBox and add it to our toplevel window */
+    
+    event_box = gtk_event_box_new ();
+    gtk_container_add (GTK_CONTAINER(window), event_box);
+    gtk_widget_show (event_box);
+    
+    /* Create a long label */
+    
+    label = gtk_label_new ("Click here to quit, quit, quit, quit, quit");
+    gtk_container_add (GTK_CONTAINER (event_box), label);
+    gtk_widget_show (label);
+    
+    /* Clip it short. */
+    gtk_widget_set_usize (label, 110, 20);
+    
+    /* And bind an action to it */
+    gtk_widget_set_events (event_box, GDK_BUTTON_PRESS_MASK);
+    gtk_signal_connect (GTK_OBJECT(event_box), "button_press_event",
+			GTK_SIGNAL_FUNC (gtk_exit), NULL);
+    
+    /* Yet one more thing you need an X window for ... */
+    
+    gtk_widget_realize (event_box);
+    gdk_window_set_cursor (event_box->window, gdk_cursor_new (GDK_HAND1));
+    
+    gtk_widget_show (window);
+    
+    gtk_main ();
+    
+    return(0);
+}
+/* example-end */